Best 3D Printer Controllers. Reviews December, 2020

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

Search only BIGTREETECH brand name
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

Current price: 75.99 USD


Check price and availability


Height: 1.181102361 Inches

Length: 4.724409444 Inches

Width: 3.149606296 Inches

Weight: 220 Grams

  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.

More Info

BIQU MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard

Search only BIQU brand name
BIQU MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard

Current price: 21.99 USD


Check price and availability


  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable

More Info

3D Printer CNC Controller Kit with for ArduinoIDE, Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema 17 Stepper Motor LKB02

Search only Longruner brand name
3D Printer CNC Controller Kit with for ArduinoIDE, Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema 17 Stepper Motor LKB02

Current price: 62.99 USD


Check price and availability


Height: 0.0393700787 Inches

Length: 0.0393700787 Inches

Width: 0.0393700787 Inches

  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.

More Info

BIGTREETECH TFT35 V3.0 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

Search only BIGTREETECH brand name
BIGTREETECH TFT35 V3.0 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

Current price: 35.99 USD


Check price and availability


  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • 5.2 sets of UART serial port extension ports are reserved for DIY use.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
  • 2.Serial port screen mode supports two printing modes: SD card and U disk.
  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.

More Info

MatterHackers Ultimachine RAMBo 1.3 3D Printer Controller Kit

Search only MatterHackers brand name
MatterHackers Ultimachine RAMBo 1.3 3D Printer Controller Kit

Current price: 176.47 USD


Check price and availability


  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • 5.2 sets of UART serial port extension ports are reserved for DIY use.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
  • 2.Serial port screen mode supports two printing modes: SD card and U disk.
  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
  • This RAMBo 1.3 Kit is complete and is made by Ultimachine
  • Endstop wires and switches of your choice, and pre-crimped wires...plus much more!
  • You will receive all electronic components securely soldered to the PCB
  • This pre-assembled mother board meets all your needs

More Info

BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130 (with 4TMC2208)

Search only BIGTREETECH brand name
BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130 (with 4TMC2208)

Current price: 51.99 USD


Check price and availability


  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • 5.2 sets of UART serial port extension ports are reserved for DIY use.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
  • 2.Serial port screen mode supports two printing modes: SD card and U disk.
  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
  • This RAMBo 1.3 Kit is complete and is made by Ultimachine
  • Endstop wires and switches of your choice, and pre-crimped wires...plus much more!
  • You will receive all electronic components securely soldered to the PCB
  • This pre-assembled mother board meets all your needs
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • TMC2208-The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
  • TMC2208-The actual and interpolated microsteps can be combined to achieve maximum torque.
  • TMC2208-The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

More Info

KINGPRINT TMC2208 V3.0-UART with SKR V1.3 32bit Smoothieware Controller Panel Board for 3D Printer Compatible With12864LCD/Support A4988/8825/TMC2208/TMC2100 Drivers

Search only KINGPRINT brand name
KINGPRINT TMC2208 V3.0-UART with SKR V1.3 32bit Smoothieware Controller Panel Board for 3D Printer Compatible With12864LCD/Support A4988/8825/TMC2208/TMC2100 Drivers

Current price: 35.97 USD


Check price and availability


  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • 5.2 sets of UART serial port extension ports are reserved for DIY use.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
  • 2.Serial port screen mode supports two printing modes: SD card and U disk.
  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
  • This RAMBo 1.3 Kit is complete and is made by Ultimachine
  • Endstop wires and switches of your choice, and pre-crimped wires...plus much more!
  • You will receive all electronic components securely soldered to the PCB
  • This pre-assembled mother board meets all your needs
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • TMC2208-The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
  • TMC2208-The actual and interpolated microsteps can be combined to achieve maximum torque.
  • TMC2208-The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4
  • 5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;
  • 4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
  • 3..Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
  • 2.Support Resume Printing While Power Off,Filament Break,CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
  • 1.The performance of the ARM-class Cortex-M3 series LPC1768 main control chip with 32-bit frequency and 100MHz is greatly improved;Reserve the extended port SERVOS of the PWM signal to support BL Touch

More Info

BIGTREETECH TFT24 V1.1 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

Search only BIGTREETECH brand name
BIGTREETECH TFT24 V1.1 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes

Current price: 20.99 USD


Check price and availability


  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • 5.2 sets of UART serial port extension ports are reserved for DIY use.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
  • 2.Serial port screen mode supports two printing modes: SD card and U disk.
  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
  • This RAMBo 1.3 Kit is complete and is made by Ultimachine
  • Endstop wires and switches of your choice, and pre-crimped wires...plus much more!
  • You will receive all electronic components securely soldered to the PCB
  • This pre-assembled mother board meets all your needs
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • TMC2208-The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
  • TMC2208-The actual and interpolated microsteps can be combined to achieve maximum torque.
  • TMC2208-The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4
  • 5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;
  • 4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
  • 3..Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
  • 2.Support Resume Printing While Power Off,Filament Break,CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
  • 1.The performance of the ARM-class Cortex-M3 series LPC1768 main control chip with 32-bit frequency and 100MHz is greatly improved;Reserve the extended port SERVOS of the PWM signal to support BL Touch
  • Use tutorial:https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1/blob/master/TFT24-V1.1Manual.pdf; Need more firmware, please contact us.
  • This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
  • Upgrade the firmware by SD card. It is easy and convenient to operate.Serial port screen mode supports two printing modes: SD card and U disk
  • ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
  • BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.

More Info

BIGTREETECH Direct SKR E3 Turbo 32bit Control Board with Onboard Sensorless homing Function for Ender 3/ CR10 3D Printer Mainboard

Search only BIGTREETECH Direct brand name
BIGTREETECH Direct SKR E3 Turbo 32bit Control Board with Onboard Sensorless homing Function for Ender 3/ CR10 3D Printer Mainboard

Current price: 52.99 USD


Check price and availability


  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • 5.2 sets of UART serial port extension ports are reserved for DIY use.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
  • 2.Serial port screen mode supports two printing modes: SD card and U disk.
  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
  • This RAMBo 1.3 Kit is complete and is made by Ultimachine
  • Endstop wires and switches of your choice, and pre-crimped wires...plus much more!
  • You will receive all electronic components securely soldered to the PCB
  • This pre-assembled mother board meets all your needs
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • TMC2208-The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
  • TMC2208-The actual and interpolated microsteps can be combined to achieve maximum torque.
  • TMC2208-The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4
  • 5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;
  • 4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
  • 3..Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
  • 2.Support Resume Printing While Power Off,Filament Break,CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
  • 1.The performance of the ARM-class Cortex-M3 series LPC1768 main control chip with 32-bit frequency and 100MHz is greatly improved;Reserve the extended port SERVOS of the PWM signal to support BL Touch
  • Use tutorial:https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1/blob/master/TFT24-V1.1Manual.pdf; Need more firmware, please contact us.
  • This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
  • Upgrade the firmware by SD card. It is easy and convenient to operate.Serial port screen mode supports two printing modes: SD card and U disk
  • ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
  • BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
  • 5.【Standby function of TMC2209】:Adding the Standby function of TMC2209, customers can change the firmware according to their personal needs,Set the Standby function. In this mode, the drive chip will automatically cut off the power supply to the motor.Its own power consumption will also be reduced to a minimum, effectively reducing printer power consumption and saving power consumption;
  • 4.【Support】:Support BLtouch, filament detection, power-off resume, automatic shutdown, etc
  • 3.【Function】:Onboard Sensorless homing function, which can be used by plugging in the jump cap;
  • 2.【Power Chip】:Use SGM6130 power chip, support 12-24V power input, power conversion rate up to 94%, maximum output current up to 2.5A;
  • 1.【SKR E3 Turbo Equivalent to】: SKR V1.4 Turbo with 5pcs TMC2209

More Info

BIQU MKS-Base V1.6 Plate Controller Board for 3D Printer Ramps 1.4

Search only BIQU brand name
BIQU MKS-Base V1.6 Plate Controller Board for 3D Printer Ramps 1.4

Current price: 34.99 USD


Check price and availability


Weight: 0.31 Pounds

  • 【SKR Mini E3 V2.0 Firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 ;【TFT35 E3 V3.0 Firmware】 https://github.com/bigtreetech/BTT-TFT35-E3-V3.0.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
  • Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ★ Good after-sales service. We'll respond within 24 hours for any questions.
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
  • 5.2 sets of UART serial port extension ports are reserved for DIY use.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
  • 2.Serial port screen mode supports two printing modes: SD card and U disk.
  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
  • This RAMBo 1.3 Kit is complete and is made by Ultimachine
  • Endstop wires and switches of your choice, and pre-crimped wires...plus much more!
  • You will receive all electronic components securely soldered to the PCB
  • This pre-assembled mother board meets all your needs
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • TMC2208-The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
  • TMC2208-The actual and interpolated microsteps can be combined to achieve maximum torque.
  • TMC2208-The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4
  • 5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;
  • 4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
  • 3..Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
  • 2.Support Resume Printing While Power Off,Filament Break,CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
  • 1.The performance of the ARM-class Cortex-M3 series LPC1768 main control chip with 32-bit frequency and 100MHz is greatly improved;Reserve the extended port SERVOS of the PWM signal to support BL Touch
  • Use tutorial:https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1/blob/master/TFT24-V1.1Manual.pdf; Need more firmware, please contact us.
  • This display board has higher compatibility. Users can select two work modes, they are UART serial port screen mode and 12864 screen mode.
  • Upgrade the firmware by SD card. It is easy and convenient to operate.Serial port screen mode supports two printing modes: SD card and U disk
  • ARM Cortex-M3 series STM32F105RCT6 chip with 32-bit CPU 72MHz;
  • BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
  • 5.【Standby function of TMC2209】:Adding the Standby function of TMC2209, customers can change the firmware according to their personal needs,Set the Standby function. In this mode, the drive chip will automatically cut off the power supply to the motor.Its own power consumption will also be reduced to a minimum, effectively reducing printer power consumption and saving power consumption;
  • 4.【Support】:Support BLtouch, filament detection, power-off resume, automatic shutdown, etc
  • 3.【Function】:Onboard Sensorless homing function, which can be used by plugging in the jump cap;
  • 2.【Power Chip】:Use SGM6130 power chip, support 12-24V power input, power conversion rate up to 94%, maximum output current up to 2.5A;
  • 1.【SKR E3 Turbo Equivalent to】: SKR V1.4 Turbo with 5pcs TMC2209
  • 3x temperature ADC connectors for thermistors
  • Easy connect MKS TFT on AUX-1
  • Easy DISPLAY + SD-CARD connector,RepRapDiscount SmartController compatible pin header on board
  • Firmware can use the same configuration as ramps1.4
  • Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware

More Info

1    2    3    4    5    6    7    8    9    10