Best Antenna Relays. Reviews December, 2020

Universal 12V car Automatic Antenna kit Automatic AM & FM Radio Electric Pole air

Search only AWEIR brand name
Universal 12V car Automatic Antenna kit Automatic AM & FM Radio Electric Pole air

Current price: 33.99 USD


Check price and availability


Height: 2.3 Inches

Length: 13.3 Inches

Width: 3.5 Inches

  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.

More Info

MFC 5.7" Black AM FM Radio Signal Reception Antenna Mast Fit for Jeep Wrangler JK & JL & TJ 1997-2019 Heavy Gauge Billet Aluminum Aerial Replacement

Search only MFC brand name
MFC 5.7

Current price: 18.99 USD


Check price and availability


  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used

More Info

URO Parts 3533568 Antenna Mast, For Sedans Only

Search only URO Parts brand name
URO Parts 3533568 Antenna Mast, For Sedans Only

Current price: 16.89 USD

Saving: $1.14 (6%)


Check price and availability


Weight: 0.45 Pounds

Warranty: 24 month unlimited mileage

  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment

More Info

Power Antenna for Acura, Audi, Bmw, Chevrolet, Chrysler, Dodge, Ford, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Lexus, Land Rover, Mazda, Mercedes Benz, Nissan, Porsche, Saab,Subaru,Toyota

Search only AntennaMastsRus brand name
Power Antenna for Acura, Audi, Bmw, Chevrolet, Chrysler, Dodge, Ford, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Lexus, Land Rover, Mazda, Mercedes Benz, Nissan, Porsche, Saab,Subaru,Toyota

Current price: 59.99 USD


Check price and availability


  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment
  • Ships From WISCONSIN!! 1 Year Warranty!!
  • 100% Satisfaction Guarantee, Period!
  • Detailed Step-By-Step Instructions - Easy Installation for Everyone!
  • $250 Savings over your Local Dealer
  • High Quality Replacement Power Antenna

More Info

Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59

Search only Abssrsautomotive brand name
Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59

Current price: 56.6 USD


Check price and availability


  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment
  • Ships From WISCONSIN!! 1 Year Warranty!!
  • 100% Satisfaction Guarantee, Period!
  • Detailed Step-By-Step Instructions - Easy Installation for Everyone!
  • $250 Savings over your Local Dealer
  • High Quality Replacement Power Antenna
  • Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59

More Info

The Original 6 3/4 Inch - Car Wash Proof Short EPDM Rubber Antenna - USA Stainless Steel Threading - Powerful Internal Copper Coil/Premium Reception

Search only Votex brand name
The Original 6 3/4 Inch - Car Wash Proof Short EPDM Rubber Antenna - USA Stainless Steel Threading - Powerful Internal Copper Coil/Premium Reception

Current price: 27.95 USD

Saving: $2.04 (7%)


Check price and availability


Warranty: 1 Year Replacement Warranty

  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment
  • Ships From WISCONSIN!! 1 Year Warranty!!
  • 100% Satisfaction Guarantee, Period!
  • Detailed Step-By-Step Instructions - Easy Installation for Everyone!
  • $250 Savings over your Local Dealer
  • High Quality Replacement Power Antenna
  • Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59
  • EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
  • EXCLUSIVITY - Our 6 3/4" is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4" can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it’s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4" must not be confused with attempted duplicates.
  • UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 6 3/4" German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
  • STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
  • CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)

More Info

URO Parts 9000001317 Antenna Mast, Rear Mounted, Smooth

Search only URO Parts brand name
URO Parts 9000001317 Antenna Mast, Rear Mounted, Smooth

Current price: 18.15 USD


Check price and availability


Height: 1 Inches

Length: 13 Inches

Width: 8 Inches

Weight: 0.2 Pounds

Warranty: 24 month unlimited mileage

  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment
  • Ships From WISCONSIN!! 1 Year Warranty!!
  • 100% Satisfaction Guarantee, Period!
  • Detailed Step-By-Step Instructions - Easy Installation for Everyone!
  • $250 Savings over your Local Dealer
  • High Quality Replacement Power Antenna
  • Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59
  • EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
  • EXCLUSIVITY - Our 6 3/4" is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4" can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it’s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4" must not be confused with attempted duplicates.
  • UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 6 3/4" German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
  • STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
  • CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)
  • Fit type: Vehicle Specific
  • Alloy conductors minimize electrical resistance for clear radio signal
  • Plug-and-play connection
  • Manufactured to OE dimensions for easy installation and factory appearance
  • Replace your bent or broken antenna to restore reception of your favorite radio stations
  • Guaranteed fitment

More Info

Jaguar XJ6 1993 to 1994 Antenna Relay DBC10010

Search only Jaguar brand name
Jaguar XJ6 1993 to 1994 Antenna Relay DBC10010

Current price: 24.99 USD


Check price and availability


Warranty: 30 days from date of delivery to buyer - NO REFUNDS EXCHANGE ONLY IF DEFECTIVE

  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment
  • Ships From WISCONSIN!! 1 Year Warranty!!
  • 100% Satisfaction Guarantee, Period!
  • Detailed Step-By-Step Instructions - Easy Installation for Everyone!
  • $250 Savings over your Local Dealer
  • High Quality Replacement Power Antenna
  • Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59
  • EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
  • EXCLUSIVITY - Our 6 3/4" is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4" can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it’s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4" must not be confused with attempted duplicates.
  • UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 6 3/4" German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
  • STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
  • CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)
  • Fit type: Vehicle Specific
  • Alloy conductors minimize electrical resistance for clear radio signal
  • Plug-and-play connection
  • Manufactured to OE dimensions for easy installation and factory appearance
  • Replace your bent or broken antenna to restore reception of your favorite radio stations
  • Guaranteed fitment

More Info

ICBEAMER 3" 76 mm Aluminum Matte Black w/Carbon Fiber Universal AM/FM Radio Antenna Screw-in Stubby Aerial Replacement

Search only ICBEAMER brand name
ICBEAMER 3

Current price: 14.99 USD


Check price and availability


Height: 2.5 Inches

Length: 4 Inches

Width: 6 Inches

  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment
  • Ships From WISCONSIN!! 1 Year Warranty!!
  • 100% Satisfaction Guarantee, Period!
  • Detailed Step-By-Step Instructions - Easy Installation for Everyone!
  • $250 Savings over your Local Dealer
  • High Quality Replacement Power Antenna
  • Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59
  • EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
  • EXCLUSIVITY - Our 6 3/4" is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4" can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it’s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4" must not be confused with attempted duplicates.
  • UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 6 3/4" German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
  • STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
  • CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)
  • Fit type: Vehicle Specific
  • Alloy conductors minimize electrical resistance for clear radio signal
  • Plug-and-play connection
  • Manufactured to OE dimensions for easy installation and factory appearance
  • Replace your bent or broken antenna to restore reception of your favorite radio stations
  • Guaranteed fitment
  • ⭐At ICBEAMER we focus on product quality and value the shopping experience of each customer highly. Every product purchased form us comes with a life-time warranty and a 24/7 friendly customer service. Whenever you have questions, please turn to us first, we are glad to help you out!
  • ⭐ICBEAMER antenna uses high-class carbon fiber material for the case and includes a highly conductive Internal aluminum coil, which means that the antenna is not only durable, but also provides high-quality signal reception. Enjoy your drive better with ICBEAMER car antenna.
  • ⭐There are 4 different screws included in the package, which is enough for almost all car models. ICBEAMER universal car antenna is applicable for Ford f150, Toyota 4runner, Toyota Tundra and other brand models like Mazda, VW, Chevrolet, Audi, Honda, WRC, Mini, Nissan, Mitsubishi, etc.
  • ⭐It only take you a few minutes to install your new ICBEAMER car antenna. Simply unscrew and remove the old antenna on your car, then choose an applicable screw for your car and install the antenna. No need to visit a car repair shop, you can simply do it yourself and save money!
  • ⭐Worry about your car antenna getting bent by violent car washing? How about give this 3 inch truck antenna a try! ICBEAMER short antenna is specially designed for sports cars. It is short yet robust to withstand the car wash, and will not easily be bent or damaged, which can become a long-term companion for your car!

More Info

ACDelco 10335281 GM Original Equipment Digital Mobile Telephone Antenna Mast

Search only ACDelco brand name
ACDelco 10335281 GM Original Equipment Digital Mobile Telephone Antenna Mast

Current price: 19.95 USD

Saving: $4.83 (19%)


Check price and availability


Height: 1.1 Inches

Length: 3.7 Inches

Width: 1.1 Inches

Weight: 0.02 Pounds

Warranty: 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

  • [Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.
  • [Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • [Material]: stainless steel; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • [Wiring method]: (three wires) connect the red wire to the positive pole of the power supply, the black wire is grounded through the lug, and the green wire has two connection methods: one is to directly supply power to the positive pole, and the antenna rises and falls with the power on/off , The other is to connect the control line so that the antenna can be controlled at any time
  • [Scope of application]: After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • 5.【Package】1x Antenna & 2x Mounting bolt(Copper Bolt Fit For Jeep Wrangler JK & JL / Aluminum Bolt Fit For Jeep Wrangler TJ).
  • 4.【Fitment】Fit For all Jeep JL & JK & TJ Wranglers.Suitable all weather.In the urban AM/FM radio signal can normally received,and the signal in the remote mountain area will be slightly worse
  • 3.【Installation】Easy to install.This is a plug and play antenna which means unscrew original antenna and screw the new Antenna in by hands.Takes a minute to do,no tools required!
  • 2.【Design】Stylish and unique appearance design,Heavy Gauge Billet Aluminum,Will not obstruct the vision.Good working condition.Its perfect to decorate your car
  • 1.【Material 】Antenna made out of Heavy Gauge Billet Aluminum,anodized with a durable and smooth black finish,will not fade over longtime used
  • Fit type: Vehicle Specific
  • alloy conductors minimize electrical resistance for clear radio signal
  • plug-and-play connection
  • manufactured to oe dimensions for easy installation and factory appearance
  • replace your bent or broken antenna to restore reception of your favorite radio stations
  • guaranteed fitment
  • Ships From WISCONSIN!! 1 Year Warranty!!
  • 100% Satisfaction Guarantee, Period!
  • Detailed Step-By-Step Instructions - Easy Installation for Everyone!
  • $250 Savings over your Local Dealer
  • High Quality Replacement Power Antenna
  • Abssrsautomotive Power Antenna Relay For Buick Cadillac Oldsmobile 1981-1988 RY59
  • EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
  • EXCLUSIVITY - Our 6 3/4" is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4" can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it’s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4" must not be confused with attempted duplicates.
  • UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 6 3/4" German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
  • STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
  • CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)
  • Fit type: Vehicle Specific
  • Alloy conductors minimize electrical resistance for clear radio signal
  • Plug-and-play connection
  • Manufactured to OE dimensions for easy installation and factory appearance
  • Replace your bent or broken antenna to restore reception of your favorite radio stations
  • Guaranteed fitment
  • ⭐At ICBEAMER we focus on product quality and value the shopping experience of each customer highly. Every product purchased form us comes with a life-time warranty and a 24/7 friendly customer service. Whenever you have questions, please turn to us first, we are glad to help you out!
  • ⭐ICBEAMER antenna uses high-class carbon fiber material for the case and includes a highly conductive Internal aluminum coil, which means that the antenna is not only durable, but also provides high-quality signal reception. Enjoy your drive better with ICBEAMER car antenna.
  • ⭐There are 4 different screws included in the package, which is enough for almost all car models. ICBEAMER universal car antenna is applicable for Ford f150, Toyota 4runner, Toyota Tundra and other brand models like Mazda, VW, Chevrolet, Audi, Honda, WRC, Mini, Nissan, Mitsubishi, etc.
  • ⭐It only take you a few minutes to install your new ICBEAMER car antenna. Simply unscrew and remove the old antenna on your car, then choose an applicable screw for your car and install the antenna. No need to visit a car repair shop, you can simply do it yourself and save money!
  • ⭐Worry about your car antenna getting bent by violent car washing? How about give this 3 inch truck antenna a try! ICBEAMER short antenna is specially designed for sports cars. It is short yet robust to withstand the car wash, and will not easily be bent or damaged, which can become a long-term companion for your car!
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Made with durable materials to withstand exposure to harsh weather and car washes
  • ACDelco GM OE Antennas have signal strength, clarity, and signal interference protection

More Info

1    2    3    4    5    6    7    8    9    10