Affordable Arc Welding Tips. Reviews November, 2020, page 6

Contact Tip, FasTip, 0.035, PK25

Search only Miller Electric brand name
Contact Tip, FasTip, 0.035, PK25

Current price: 36.58 USD


Check price and availability


Height: 1 Inches

Length: 6 Inches

Width: 1.5 Inches

Weight: 0.59 Pounds

  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip

More Info

MIG Welding Kit for .035" 100L Tip-Diffuer-Nozzle M3

Search only MOTOKU brand name
MIG Welding Kit for .035

Current price: 14.99 USD


Check price and availability


  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice

More Info

hynade Pilot Arc Plasma Cutter, Dual Voltage 115/230V 50A Plasma Cutting Machine, Inverter Metal Plasma Cutter Max Cutting Thickness 14mm (HYC50DVP 115/230V)

Search only hynade brand name
hynade Pilot Arc Plasma Cutter, Dual Voltage 115/230V 50A Plasma Cutting Machine, Inverter Metal Plasma Cutter Max Cutting Thickness 14mm (HYC50DVP 115/230V)

Current price: 249 USD

Saving: $16.00 (6%)


Check price and availability


  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V

More Info

Victor 0324-0070 0-W-1 Professional Welding Nozzle

Search only ESAB brand name
Victor 0324-0070 0-W-1 Professional Welding Nozzle

Current price: 65.99 USD


Check price and availability


Height: 3 Inches

Length: 5 Inches

Width: 3 Inches

Weight: 0.25 Pounds

  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
  • Tip angle is at 65 degrees
  • Fuel gas usage is Acetylene and Hydrogen
  • Produces a long cone flame
  • General purpose welding and heating
  • For use with 100 series torch handles

More Info

MIG155GSV 155 AMP INVERTER MIG/STICK ARC WELDER WITH DUAL VOLTAGE 220V/110V welding machine

Search only W Weldpro brand name
MIG155GSV 155 AMP INVERTER MIG/STICK ARC WELDER WITH DUAL VOLTAGE 220V/110V welding machine

Current price: 320 USD


Check price and availability


Height: 6.69 Inches

Length: 14.96 Inches

Width: 13.58 Inches

Weight: 21.17 Pounds

  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
  • Tip angle is at 65 degrees
  • Fuel gas usage is Acetylene and Hydrogen
  • Produces a long cone flame
  • General purpose welding and heating
  • For use with 100 series torch handles
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.

More Info

Weller MT70 Arc Welding Tip, Black

Search only Weller brand name
Weller MT70 Arc Welding Tip, Black

Current price: 5.79 USD


Check price and availability


Height: 3 Inches

Length: 2.2 Inches

Width: 0.55 Inches

Weight: 0.015 Pounds

  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
  • Tip angle is at 65 degrees
  • Fuel gas usage is Acetylene and Hydrogen
  • Produces a long cone flame
  • General purpose welding and heating
  • For use with 100 series torch handles
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.
  • Manufactured in Mexico
  • Color: Black
  • Tip for MT1501 soldering pencil

More Info

Shark Industries Victor Style Acetylene Series W-1 Welding Nozzle #2

Search only Shark Industries brand name
Shark Industries Victor Style Acetylene Series W-1 Welding Nozzle #2

Current price: 24.75 USD


Check price and availability


Height: 0.75 Inches

Length: 6.5 Inches

Width: 2.25 Inches

  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
  • Tip angle is at 65 degrees
  • Fuel gas usage is Acetylene and Hydrogen
  • Produces a long cone flame
  • General purpose welding and heating
  • For use with 100 series torch handles
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.
  • Manufactured in Mexico
  • Color: Black
  • Tip for MT1501 soldering pencil
  • Durable and long lasting
  • Use for general purpose welding and preheating
  • Comes complete with tip and mixer
  • W-1 Welding Nozzle
  • Victor Style Acetylene Welding nozzle

More Info

Polyvance Bigfoot Tip

Search only Polyvance brand name
Polyvance Bigfoot Tip

Current price: 33.34 USD


Check price and availability


Weight: 0.04 Pounds

  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
  • Tip angle is at 65 degrees
  • Fuel gas usage is Acetylene and Hydrogen
  • Produces a long cone flame
  • General purpose welding and heating
  • For use with 100 series torch handles
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.
  • Manufactured in Mexico
  • Color: Black
  • Tip for MT1501 soldering pencil
  • Durable and long lasting
  • Use for general purpose welding and preheating
  • Comes complete with tip and mixer
  • W-1 Welding Nozzle
  • Victor Style Acetylene Welding nozzle
  • Fits Urethane Supply Company's Airless Plastic Welder
  • 12/24 thread size
  • Cast brass

More Info

TOOLIOM 135A 110V/220V Stick Welder MMA ARC Welder Machine DC Inverter Welder with Digital Display Portable Welding Machine

Search only TOOLIOM brand name
TOOLIOM 135A 110V/220V Stick Welder MMA ARC Welder Machine DC Inverter Welder with Digital Display Portable Welding Machine

Current price: 89.99 USD


Check price and availability


  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
  • Tip angle is at 65 degrees
  • Fuel gas usage is Acetylene and Hydrogen
  • Produces a long cone flame
  • General purpose welding and heating
  • For use with 100 series torch handles
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.
  • Manufactured in Mexico
  • Color: Black
  • Tip for MT1501 soldering pencil
  • Durable and long lasting
  • Use for general purpose welding and preheating
  • Comes complete with tip and mixer
  • W-1 Welding Nozzle
  • Victor Style Acetylene Welding nozzle
  • Fits Urethane Supply Company's Airless Plastic Welder
  • 12/24 thread size
  • Cast brass
  • Dual voltage input design: Support 110V & 220V input voltage
  • Portable: With adjustable shoulder strap,is convenient to carry between job sites or use.
  • Built-in excellent anti-stick, arc force, hot start and other functions,easy to operate,safe and convenient for beginner.
  • Equipped with digital display and trouble indicate,read the output welding current.
  • Can handle E6010 cellulose electrode, adopting IGBT Inverter power system,suitable for mild steel, cast iron, stainless steel as well as hard surfacing.

More Info

A1, 20-pk 0.030” Replacement MIG contact tips, Miller style, 770177, compatible with Hobart Miller Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100, etc.

Search only Chowel Weldparts Inc brand name
A1, 20-pk 0.030” Replacement MIG contact tips, Miller style, 770177, compatible with Hobart Miller Handler 125, 125 EZ, 130, 140, 190, 210MVP, TREK 180, Auto Arc Toolmate 100, etc.

Current price: 17.99 USD


Check price and availability


  • Item: welding contact tip
  • Material: copper
  • For use with mild and stainless steel wire
  • Type: heavy duty fasTip
  • These are Aftermarket Parts.
  • Gas Diffuser: 35-50
  • Contact Tip: 11-35 (0.035")
  • Gas nozzle: 21-50 ,1/2''nozzle orifice
  • ✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.
  • ✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.
  • ✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.
  • ✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.
  • ✌Pilot Arc plasma cutter 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V
  • Tip angle is at 65 degrees
  • Fuel gas usage is Acetylene and Hydrogen
  • Produces a long cone flame
  • General purpose welding and heating
  • For use with 100 series torch handles
  • The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding.
  • This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.
  • Comfortably welds up to 1/4 in. mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in. to 472 in. per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines!
  • Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories.
  • Compact – portable – very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.
  • Manufactured in Mexico
  • Color: Black
  • Tip for MT1501 soldering pencil
  • Durable and long lasting
  • Use for general purpose welding and preheating
  • Comes complete with tip and mixer
  • W-1 Welding Nozzle
  • Victor Style Acetylene Welding nozzle
  • Fits Urethane Supply Company's Airless Plastic Welder
  • 12/24 thread size
  • Cast brass
  • Dual voltage input design: Support 110V & 220V input voltage
  • Portable: With adjustable shoulder strap,is convenient to carry between job sites or use.
  • Built-in excellent anti-stick, arc force, hot start and other functions,easy to operate,safe and convenient for beginner.
  • Equipped with digital display and trouble indicate,read the output welding current.
  • Can handle E6010 cellulose electrode, adopting IGBT Inverter power system,suitable for mild steel, cast iron, stainless steel as well as hard surfacing.
  • Package of 20
  • Free returns within 30 days of purchase
  • Free shipping provided with U.S. Postal Service (USPS)
  • Usually ships the same day (next business day at the latest)
  • High quality 0.030” Hobart style contact tip for MIG welder. Model number 770177.

More Info

1    2    3    4    5    6    7    8    9    10