Best Automotive Diagnostic Multimeters . Reviews January, 2021

Autel AutoLink AL539 OBD2 Scanner car Diagnostic Tool with Automotive Multimeter & Turns Off Engine Light (MIL)

Search only Autel brand name
Autel AutoLink AL539 OBD2 Scanner car Diagnostic Tool with Automotive Multimeter & Turns Off Engine Light (MIL)

Current price: 79.99 USD


Check price and availability


  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple

More Info

Car Electrical Circuit Tester, Keenso Automotive Multimeter Diagnostic Test Tool Digital Voltage Current Resistance Meter Tester (Red)

Search only Keenso brand name
Car Electrical Circuit Tester, Keenso Automotive Multimeter Diagnostic Test Tool Digital Voltage Current Resistance Meter Tester (Red)

Current price: 29.89 USD

Saving: $3.00 (9%)


Check price and availability


  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test

More Info

KKmoon Multi-Function Power Circuit Probe Kit, Auto Circuit Detector, Car Electric Circuit Voltage Tester Multimeter Car Diagnostics Tools

Search only KKmoon brand name
KKmoon Multi-Function Power Circuit Probe Kit, Auto Circuit Detector, Car Electric Circuit Voltage Tester Multimeter Car Diagnostics Tools

Current price: 28.79 USD


Check price and availability


  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.

More Info

Mrcartool Hantek 1008B 8Channel PC USB Auto Car Scope/DAQ/8CH Generator 8 Channels Automotive Diagnostic Oscilloscope

Search only Mrcartool brand name
Mrcartool Hantek 1008B 8Channel PC USB Auto Car Scope/DAQ/8CH Generator 8 Channels Automotive Diagnostic Oscilloscope

Current price: 89.99 USD


Check price and availability


Height: 50 Centimeters

Length: 100 Centimeters

Width: 100 Centimeters

  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.
  • Signal generator function, can simulate crankshaft and camshaft signal.
  • Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
  • Install the PC software and start to use without any other drivers. Support WIN XP/7/8/10.
  • Support the display surface in Chinese, English, German language, and it can be switched freely.USB2.0 power supply + communication interface, plug and play, and support hot plugging.
  • 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.

More Info

Fluke FLUKE-88-5 88V 1000V Automotive Multimeter

Search only Fluke brand name
Fluke FLUKE-88-5 88V 1000V Automotive Multimeter

Current price: 371.99 USD

Saving: $128.00 (26%)


Check price and availability


Weight: 5.25 Pounds

Warranty: Limited Life Time Warranty

  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.
  • Signal generator function, can simulate crankshaft and camshaft signal.
  • Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
  • Install the PC software and start to use without any other drivers. Support WIN XP/7/8/10.
  • Support the display surface in Chinese, English, German language, and it can be switched freely.USB2.0 power supply + communication interface, plug and play, and support hot plugging.
  • 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
  • Maximum Duty Cycle or 99.9 % within 2% per KHz +0.1%
  • Temperature measurment of -200.0°C - 1090°C (-328.0°F - 1994.0°F, 1.0% excluding probe)
  • Withstands hazardous 8,000 volt spikes
  • Measures to 1000V AC and DC
  • Maximum Resistance of 50 MΩ
  • Safety rated for Category III to 1000V and Category IV to 600V.Operating Temperature:-20 °C - 55 °C
  • Performs millisecond pulse width measurements for fuel injectors
  • Built-in thermometer allows for temperature readings without a separate instrument
  • Manual- and auto-ranging modes for user flexibility; Peak Min/Max to record transients as fast as 250 μs
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature

More Info

AUTOOL Automotive Circuit Tester,Car Electrical System Diagnostic Tool with LED Flashlight BT-260 for 6V/12V/24V Vehicle/Boat/Motorcycle/Heavy Duty/Truck

Search only AUTOOL brand name
AUTOOL Automotive Circuit Tester,Car Electrical System Diagnostic Tool with LED Flashlight BT-260 for 6V/12V/24V Vehicle/Boat/Motorcycle/Heavy Duty/Truck

Current price: 55 USD


Check price and availability


Height: 3.149606296 Inches

Length: 9.055118101 Inches

Width: 7.87401574 Inches

Weight: 1020 Kilograms

  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.
  • Signal generator function, can simulate crankshaft and camshaft signal.
  • Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
  • Install the PC software and start to use without any other drivers. Support WIN XP/7/8/10.
  • Support the display surface in Chinese, English, German language, and it can be switched freely.USB2.0 power supply + communication interface, plug and play, and support hot plugging.
  • 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
  • Maximum Duty Cycle or 99.9 % within 2% per KHz +0.1%
  • Temperature measurment of -200.0°C - 1090°C (-328.0°F - 1994.0°F, 1.0% excluding probe)
  • Withstands hazardous 8,000 volt spikes
  • Measures to 1000V AC and DC
  • Maximum Resistance of 50 MΩ
  • Safety rated for Category III to 1000V and Category IV to 600V.Operating Temperature:-20 °C - 55 °C
  • Performs millisecond pulse width measurements for fuel injectors
  • Built-in thermometer allows for temperature readings without a separate instrument
  • Manual- and auto-ranging modes for user flexibility; Peak Min/Max to record transients as fast as 250 μs
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature
  • Following and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
  • Testing for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
  • Integrate LED flashlight on the head, let us work in dark condition easily
  • Multi-language support: English German French Russian Spanish Italian Portuguese
  • The AUTOOL BT260 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt .vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery.

More Info

Akozon Tachometer Meter AT2150B Handheld Automotive Tachometer Meter/LCD Display Digital Multimeter

Search only Akozon brand name
Akozon Tachometer Meter AT2150B Handheld Automotive Tachometer Meter/LCD Display Digital Multimeter

Current price: 30.79 USD


Check price and availability


Height: 1.968503935 Inches

Length: 5.905511805 Inches

Width: 3.93700787 Inches

  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.
  • Signal generator function, can simulate crankshaft and camshaft signal.
  • Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
  • Install the PC software and start to use without any other drivers. Support WIN XP/7/8/10.
  • Support the display surface in Chinese, English, German language, and it can be switched freely.USB2.0 power supply + communication interface, plug and play, and support hot plugging.
  • 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
  • Maximum Duty Cycle or 99.9 % within 2% per KHz +0.1%
  • Temperature measurment of -200.0°C - 1090°C (-328.0°F - 1994.0°F, 1.0% excluding probe)
  • Withstands hazardous 8,000 volt spikes
  • Measures to 1000V AC and DC
  • Maximum Resistance of 50 MΩ
  • Safety rated for Category III to 1000V and Category IV to 600V.Operating Temperature:-20 °C - 55 °C
  • Performs millisecond pulse width measurements for fuel injectors
  • Built-in thermometer allows for temperature readings without a separate instrument
  • Manual- and auto-ranging modes for user flexibility; Peak Min/Max to record transients as fast as 250 μs
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature
  • Following and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
  • Testing for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
  • Integrate LED flashlight on the head, let us work in dark condition easily
  • Multi-language support: English German French Russian Spanish Italian Portuguese
  • The AUTOOL BT260 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt .vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery.
  • ❀ [Display Function] Equipped with a LCD backlit LCD display, it can also be used in the dark, with a maximum display of 1999 counts. And support low battery display, low battery voltage indication ("" symbol is displayed on the left side of the LCD)
  • ❀ [Non-contact tachometer] This is a non-contact tachometer. The non-contact design avoids contact between the instrument and the component under test, and solves the measurement problems of some small or volatile test components.
  • ❀ [Protection function] Low power CMOS double integral A / D conversion integrated circuit, automatic zero calibration, automatic polarity display, data retention, low battery and over-range indication, and with overload protection, 15 minutes of automatic shutdown without operation.
  • ❀ [Multi-function multimeter] Support to measure DC voltage, current, AC voltage, current, and resistance, capacitance, temperature, crystal diode, triode parameters and circuit on-off. This product is suitable for automobile maintenance and debugging, etc. It is your ideal measuring tool.
  • ❀ [Professional Tachometer] This is a contact type tachometer with stable performance, high reliability and high safety. It supports 3CYL / 4/5/6 / 8CYL range measurement(Speed measurement range: 5000-10000 / min) and maintains a high accuracy of ± (1.2% + 2).

More Info

OTC 3980 750 Series Automotive Multimeter

Search only OTC brand name
OTC 3980 750 Series Automotive Multimeter

Current price: 160.44 USD


Check price and availability


Height: 3.49999999643 Inches

Length: 9.9999999898 Inches

Width: 12.49999998725 Inches

Weight: 1 Kilograms

Warranty: One year limited warranty

  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.
  • Signal generator function, can simulate crankshaft and camshaft signal.
  • Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
  • Install the PC software and start to use without any other drivers. Support WIN XP/7/8/10.
  • Support the display surface in Chinese, English, German language, and it can be switched freely.USB2.0 power supply + communication interface, plug and play, and support hot plugging.
  • 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
  • Maximum Duty Cycle or 99.9 % within 2% per KHz +0.1%
  • Temperature measurment of -200.0°C - 1090°C (-328.0°F - 1994.0°F, 1.0% excluding probe)
  • Withstands hazardous 8,000 volt spikes
  • Measures to 1000V AC and DC
  • Maximum Resistance of 50 MΩ
  • Safety rated for Category III to 1000V and Category IV to 600V.Operating Temperature:-20 °C - 55 °C
  • Performs millisecond pulse width measurements for fuel injectors
  • Built-in thermometer allows for temperature readings without a separate instrument
  • Manual- and auto-ranging modes for user flexibility; Peak Min/Max to record transients as fast as 250 μs
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature
  • Following and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
  • Testing for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
  • Integrate LED flashlight on the head, let us work in dark condition easily
  • Multi-language support: English German French Russian Spanish Italian Portuguese
  • The AUTOOL BT260 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt .vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery.
  • ❀ [Display Function] Equipped with a LCD backlit LCD display, it can also be used in the dark, with a maximum display of 1999 counts. And support low battery display, low battery voltage indication ("" symbol is displayed on the left side of the LCD)
  • ❀ [Non-contact tachometer] This is a non-contact tachometer. The non-contact design avoids contact between the instrument and the component under test, and solves the measurement problems of some small or volatile test components.
  • ❀ [Protection function] Low power CMOS double integral A / D conversion integrated circuit, automatic zero calibration, automatic polarity display, data retention, low battery and over-range indication, and with overload protection, 15 minutes of automatic shutdown without operation.
  • ❀ [Multi-function multimeter] Support to measure DC voltage, current, AC voltage, current, and resistance, capacitance, temperature, crystal diode, triode parameters and circuit on-off. This product is suitable for automobile maintenance and debugging, etc. It is your ideal measuring tool.
  • ❀ [Professional Tachometer] This is a contact type tachometer with stable performance, high reliability and high safety. It supports 3CYL / 4/5/6 / 8CYL range measurement(Speed measurement range: 5000-10000 / min) and maintains a high accuracy of ± (1.2% + 2).
  • PC cable software and black canvas case is included
  • Auto power off
  • CATIII so it is compatible Hybrid vehicle systems
  • Plus automotive specific tests true RMS RPM dwell pulse width temperature backlight RS232 and min/max
  • Includes powerful automotive test functions such as frequency duty cycle diode and continuity tests

More Info

Fluke 88 V/A Automotive Multimeter Combo Kit

Search only Fluke brand name
Fluke 88 V/A Automotive Multimeter Combo Kit

Current price: 502.87 USD

Saving: $197.12 (28%)


Check price and availability


Height: 4.5 Inches

Length: 13.38 Inches

Width: 8.75 Inches

Weight: 5.05 Pounds

Warranty: Fluke

  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.
  • Signal generator function, can simulate crankshaft and camshaft signal.
  • Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
  • Install the PC software and start to use without any other drivers. Support WIN XP/7/8/10.
  • Support the display surface in Chinese, English, German language, and it can be switched freely.USB2.0 power supply + communication interface, plug and play, and support hot plugging.
  • 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
  • Maximum Duty Cycle or 99.9 % within 2% per KHz +0.1%
  • Temperature measurment of -200.0°C - 1090°C (-328.0°F - 1994.0°F, 1.0% excluding probe)
  • Withstands hazardous 8,000 volt spikes
  • Measures to 1000V AC and DC
  • Maximum Resistance of 50 MΩ
  • Safety rated for Category III to 1000V and Category IV to 600V.Operating Temperature:-20 °C - 55 °C
  • Performs millisecond pulse width measurements for fuel injectors
  • Built-in thermometer allows for temperature readings without a separate instrument
  • Manual- and auto-ranging modes for user flexibility; Peak Min/Max to record transients as fast as 250 μs
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature
  • Following and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
  • Testing for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
  • Integrate LED flashlight on the head, let us work in dark condition easily
  • Multi-language support: English German French Russian Spanish Italian Portuguese
  • The AUTOOL BT260 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt .vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery.
  • ❀ [Display Function] Equipped with a LCD backlit LCD display, it can also be used in the dark, with a maximum display of 1999 counts. And support low battery display, low battery voltage indication ("" symbol is displayed on the left side of the LCD)
  • ❀ [Non-contact tachometer] This is a non-contact tachometer. The non-contact design avoids contact between the instrument and the component under test, and solves the measurement problems of some small or volatile test components.
  • ❀ [Protection function] Low power CMOS double integral A / D conversion integrated circuit, automatic zero calibration, automatic polarity display, data retention, low battery and over-range indication, and with overload protection, 15 minutes of automatic shutdown without operation.
  • ❀ [Multi-function multimeter] Support to measure DC voltage, current, AC voltage, current, and resistance, capacitance, temperature, crystal diode, triode parameters and circuit on-off. This product is suitable for automobile maintenance and debugging, etc. It is your ideal measuring tool.
  • ❀ [Professional Tachometer] This is a contact type tachometer with stable performance, high reliability and high safety. It supports 3CYL / 4/5/6 / 8CYL range measurement(Speed measurement range: 5000-10000 / min) and maintains a high accuracy of ± (1.2% + 2).
  • PC cable software and black canvas case is included
  • Auto power off
  • CATIII so it is compatible Hybrid vehicle systems
  • Plus automotive specific tests true RMS RPM dwell pulse width temperature backlight RS232 and min/max
  • Includes powerful automotive test functions such as frequency duty cycle diode and continuity tests
  • Millisecond pulse width measurements for fuel injectors
  • RPM measurements with inductive pickup
  • Resistance, continuity and diode test
  • Safety rated for Category III to 1000V and Category IV to 600V. Resistance, continuity and diode test
  • Performs millisecond pulse width measurements for fuel injectors. Millisecond pulse width measurements for fuel injectors
  • Built in thermometer allows for temperature readings without a separate instrument
  • Manual and auto ranging modes for user flexibility. RPM measurements with inductive pickup
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature

More Info

ICARSCANNER New Multi Function Automotive Circuit Tester Lead Kit Contains 92 Pieces of Essential Test Aids & Test Lead & Electrical Testers & Auto Diagnostic Tools Wire Connectors Adapter Cables

Search only ICARSCANNER brand name
ICARSCANNER New Multi Function Automotive Circuit Tester Lead Kit Contains 92 Pieces of Essential Test Aids & Test Lead & Electrical Testers & Auto Diagnostic Tools Wire Connectors Adapter Cables

Current price: 139 USD


Check price and availability


  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, the versatile, easy-to-use AL539 will streamline automotive service and help ensure rapid, accurate diagnosis and timely repair.
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily.
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information; Support Live Data stream playback and Live Data graphing; Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems.
  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple
  • ☆ Premium Quality: The handle of the tester is made of plastic, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Tester Light Blub: With multiple test lamps. Also with a lighting lamp, convenient to use, during the day or low light conditions
  • ☆ Wide Application: Car circuit tester pen is widely used in automotive electrical decoration, such as the installation of anti-theft devices, audio, subwoofer, etc
  • ☆ Perfect Detector: Can detect each fault in the place where the space is narrow and light is weak. Specially detects the wires with bad contact and aging wires
  • ☆ Multiple Test: With multimeter functions (voltage, resistor, diode, buzzer, etc.) Support short-circuit and open-circuit test, ignition system test, generator test, charging system test, input and output signal of sensor test, executive component signal test, pulse signal test
  • The unique structure design is convenient for the narrow space operation of automobile circuits. It is convenient to use, efficient to detect, easy to operate and has reliable performance.
  • Can be used as a multimeter to measure test light,diodes, resistances, circuit continuity, circuit aging, current and voltage in a circuit.
  • It can accurately detect various line faults under the situation of no damage to rubber cover.It can accurately detect various faults inside the wire such as voltage and signal without damaging the wire insulator.
  • This automotive circuit tester has multi detection functions and unique appearance design. The various gears set by the detector are adapted to the detection of various faults. Backlit display design, clear readings and easy to use.
  • The Circuit Detector is equipped with a unique probe kit and LED lighting. It has multifunctions, including multimeter function, circuit aging supporting and testing lights functions.
  • Signal generator function, can simulate crankshaft and camshaft signal.
  • Support 4 types of cursor measurement mode -cross,track, horizontal, and vertical.It's easy to read out the time and voltage of irregular signal.
  • Install the PC software and start to use without any other drivers. Support WIN XP/7/8/10.
  • Support the display surface in Chinese, English, German language, and it can be switched freely.USB2.0 power supply + communication interface, plug and play, and support hot plugging.
  • 8 channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (​Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​. Video Help Function, provides the video help of diagnostic which can be watching online, The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data. Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal.
  • Maximum Duty Cycle or 99.9 % within 2% per KHz +0.1%
  • Temperature measurment of -200.0°C - 1090°C (-328.0°F - 1994.0°F, 1.0% excluding probe)
  • Withstands hazardous 8,000 volt spikes
  • Measures to 1000V AC and DC
  • Maximum Resistance of 50 MΩ
  • Safety rated for Category III to 1000V and Category IV to 600V.Operating Temperature:-20 °C - 55 °C
  • Performs millisecond pulse width measurements for fuel injectors
  • Built-in thermometer allows for temperature readings without a separate instrument
  • Manual- and auto-ranging modes for user flexibility; Peak Min/Max to record transients as fast as 250 μs
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature
  • Following and locate short circuits without wasting fuses. The tool's long cable allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds.
  • Testing for poor ground contacts instantly without performing voltage drop tests. The tool is also short-circuit protected; its internal circuit breaker will trip if it becomes overloaded.
  • Integrate LED flashlight on the head, let us work in dark condition easily
  • Multi-language support: English German French Russian Spanish Italian Portuguese
  • The AUTOOL BT260 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt .vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery.
  • ❀ [Display Function] Equipped with a LCD backlit LCD display, it can also be used in the dark, with a maximum display of 1999 counts. And support low battery display, low battery voltage indication ("" symbol is displayed on the left side of the LCD)
  • ❀ [Non-contact tachometer] This is a non-contact tachometer. The non-contact design avoids contact between the instrument and the component under test, and solves the measurement problems of some small or volatile test components.
  • ❀ [Protection function] Low power CMOS double integral A / D conversion integrated circuit, automatic zero calibration, automatic polarity display, data retention, low battery and over-range indication, and with overload protection, 15 minutes of automatic shutdown without operation.
  • ❀ [Multi-function multimeter] Support to measure DC voltage, current, AC voltage, current, and resistance, capacitance, temperature, crystal diode, triode parameters and circuit on-off. This product is suitable for automobile maintenance and debugging, etc. It is your ideal measuring tool.
  • ❀ [Professional Tachometer] This is a contact type tachometer with stable performance, high reliability and high safety. It supports 3CYL / 4/5/6 / 8CYL range measurement(Speed measurement range: 5000-10000 / min) and maintains a high accuracy of ± (1.2% + 2).
  • PC cable software and black canvas case is included
  • Auto power off
  • CATIII so it is compatible Hybrid vehicle systems
  • Plus automotive specific tests true RMS RPM dwell pulse width temperature backlight RS232 and min/max
  • Includes powerful automotive test functions such as frequency duty cycle diode and continuity tests
  • Millisecond pulse width measurements for fuel injectors
  • RPM measurements with inductive pickup
  • Resistance, continuity and diode test
  • Safety rated for Category III to 1000V and Category IV to 600V. Resistance, continuity and diode test
  • Performs millisecond pulse width measurements for fuel injectors. Millisecond pulse width measurements for fuel injectors
  • Built in thermometer allows for temperature readings without a separate instrument
  • Manual and auto ranging modes for user flexibility. RPM measurements with inductive pickup
  • Digital multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, and temperature
  • Its variable Resistors can be used to simulate coolant temperature sensor signals, throttle valve sensor signals to vehicle ECU to avoid unnecessary new parts replacement
  • Wiring Assistance Kit: A perfect wiring circuit checking tool Can be used quickly for adjustment and assists technician in checking the car problems accurately.
  • .Equipped with 2 sets of LED lights; it can be used to monitor Hall Effect, photoelectric signals, nozzles, electromagnetic valve of transmission shift gears and control signals.
  • Complete set of various wires in the case that are suitable for most European, American and Japanese made terminals.
  • .SRS connector provided can simulate airbag and routed contracting device of safety belt to avoid accident or miss-judgment.

More Info

1    2    3    4    5    6    7    8    9    10