Best Boat Battery Switches. Reviews January, 2021

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob, Black

Search only Blue Sea Systems brand name
Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob, Black

Current price: 27.37 USD

Saving: $4.58 (14%)


Check price and availability


Height: 3 Inches

Length: 7 Inches

Width: 4 Inches

Weight: 0.65 Pounds

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group

More Info

Cllena Dual Battery Selector Switch for Marine Boat Rv Vehicles

Search only Cllena brand name
Cllena Dual Battery Selector Switch for Marine Boat Rv Vehicles

Current price: 26.99 USD


Check price and availability


Height: 2.68 Inches

Length: 2.68 Inches

Width: 2.9 Inches

Weight: 0.50625 Pounds

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads

More Info

Blue Sea Systems HD-Series Heavy Duty On-Off Battery Switch, Beige (3000)

Search only Blue Sea Systems brand name
Blue Sea Systems HD-Series Heavy Duty On-Off Battery Switch, Beige (3000)

Current price: 64.18 USD


Check price and availability


Height: 3 Inches

Length: 9 Inches

Width: 7 Inches

Weight: 0.45 Pounds

Warranty: LIMITED WARRANTY

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats

More Info

Battery Disconnect Switch, Battery Power On/Off Switch with 4 Position for RV Battery Marine Boat Car Vehicles, with Terminals and Shrink Tubes

Search only Yolando brand name
Battery Disconnect Switch, Battery Power On/Off Switch with 4 Position for RV Battery Marine Boat Car Vehicles, with Terminals and Shrink Tubes

Current price: 19.99 USD


Check price and availability


Weight: 0.5732018812 Pounds

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats
  • 30 days full refund and 12 months Guarantee
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1250Amps momentary at 12V DC
  • Durable and Compact Size. Size: 68 x 68 x 75mm. Bolt Size: 10mm.
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Apply to auto electronics, electrical products and all kinds of 12V/24V/48V car, boat, van, caravan, etc.

More Info

Perko 8501DP Medium Duty Battery Selector Switch

Search only Perko brand name
Perko 8501DP Medium Duty Battery Selector Switch

Current price: 36.12 USD


Check price and availability


Height: 3 Inches

Length: 8 Inches

Width: 6 Inches

Weight: 0.39 Pounds

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats
  • 30 days full refund and 12 months Guarantee
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1250Amps momentary at 12V DC
  • Durable and Compact Size. Size: 68 x 68 x 75mm. Bolt Size: 10mm.
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Apply to auto electronics, electrical products and all kinds of 12V/24V/48V car, boat, van, caravan, etc.
  • Terminal Stud Size: 5/16"
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Polycarbonate body with brass terminals
  • Diameter: 5.25"

More Info

Seachoice 11501 Battery Selector Switch, Red, One size

Search only SEACHOICE brand name
Seachoice 11501 Battery Selector Switch, Red, One size

Current price: 42.66 USD

Saving: $8.29 (16%)


Check price and availability


Height: 7.49999999235 Inches

Length: 5.99999999388 Inches

Width: 2.99999999694 Inches

Weight: 0.9 Pounds

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats
  • 30 days full refund and 12 months Guarantee
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1250Amps momentary at 12V DC
  • Durable and Compact Size. Size: 68 x 68 x 75mm. Bolt Size: 10mm.
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Apply to auto electronics, electrical products and all kinds of 12V/24V/48V car, boat, van, caravan, etc.
  • Terminal Stud Size: 5/16"
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Polycarbonate body with brass terminals
  • Diameter: 5.25"
  • Size: 5-1/4 inch x 2-5/8 inch
  • Capacity: 250A continuous, 360A intermittent
  • UL listed, ignition protected and CE approved
  • For use with two or more batteries and systems under 50V
  • Permits selection between batteries for starting, charging or operation in parallel

More Info

YOUNG MARINE Battery Disconnect Switch for Marine Boat Car Rv ATV Vehicles (Master Switch)

Search only YOUNG MARINE brand name
YOUNG MARINE Battery Disconnect Switch for Marine Boat Car Rv ATV Vehicles (Master Switch)

Current price: 13.7 USD

Saving: $2.09 (13%)


Check price and availability


  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats
  • 30 days full refund and 12 months Guarantee
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1250Amps momentary at 12V DC
  • Durable and Compact Size. Size: 68 x 68 x 75mm. Bolt Size: 10mm.
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Apply to auto electronics, electrical products and all kinds of 12V/24V/48V car, boat, van, caravan, etc.
  • Terminal Stud Size: 5/16"
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Polycarbonate body with brass terminals
  • Diameter: 5.25"
  • Size: 5-1/4 inch x 2-5/8 inch
  • Capacity: 250A continuous, 360A intermittent
  • UL listed, ignition protected and CE approved
  • For use with two or more batteries and systems under 50V
  • Permits selection between batteries for starting, charging or operation in parallel
  • Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position
  • Can be used with 8V up to 60V DC systems to isolate and secure the electrical system
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.
  • On/Off 2 positions, 12V-48V DC, Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x3/8" (10mm).

More Info

Perko 9601DP Battery Disconnect Switch

Search only Perko brand name
Perko 9601DP Battery Disconnect Switch

Current price: 43.86 USD


Check price and availability


Height: 3 Inches

Length: 8 Inches

Width: 6 Inches

Weight: 0.7 Pounds

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats
  • 30 days full refund and 12 months Guarantee
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1250Amps momentary at 12V DC
  • Durable and Compact Size. Size: 68 x 68 x 75mm. Bolt Size: 10mm.
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Apply to auto electronics, electrical products and all kinds of 12V/24V/48V car, boat, van, caravan, etc.
  • Terminal Stud Size: 5/16"
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Polycarbonate body with brass terminals
  • Diameter: 5.25"
  • Size: 5-1/4 inch x 2-5/8 inch
  • Capacity: 250A continuous, 360A intermittent
  • UL listed, ignition protected and CE approved
  • For use with two or more batteries and systems under 50V
  • Permits selection between batteries for starting, charging or operation in parallel
  • Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position
  • Can be used with 8V up to 60V DC systems to isolate and secure the electrical system
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.
  • On/Off 2 positions, 12V-48V DC, Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x3/8" (10mm).
  • Ignition protected
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Dimensions: 5-1/4" diameter x 2-5/8" depth, 5/16" terminal stud size
  • Polycarbonate body with brass terminals

More Info

Cllena Battery Disconnect Switches for Car Marine Boat Rv ATV Golf Cart Vehicles

Search only Cllena brand name
Cllena Battery Disconnect Switches for Car Marine Boat Rv ATV Golf Cart Vehicles

Current price: 15.99 USD


Check price and availability


Height: 6 Inches

Length: 3 Inches

Width: 4 Inches

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats
  • 30 days full refund and 12 months Guarantee
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1250Amps momentary at 12V DC
  • Durable and Compact Size. Size: 68 x 68 x 75mm. Bolt Size: 10mm.
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Apply to auto electronics, electrical products and all kinds of 12V/24V/48V car, boat, van, caravan, etc.
  • Terminal Stud Size: 5/16"
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Polycarbonate body with brass terminals
  • Diameter: 5.25"
  • Size: 5-1/4 inch x 2-5/8 inch
  • Capacity: 250A continuous, 360A intermittent
  • UL listed, ignition protected and CE approved
  • For use with two or more batteries and systems under 50V
  • Permits selection between batteries for starting, charging or operation in parallel
  • Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position
  • Can be used with 8V up to 60V DC systems to isolate and secure the electrical system
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.
  • On/Off 2 positions, 12V-48V DC, Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x3/8" (10mm).
  • Ignition protected
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Dimensions: 5-1/4" diameter x 2-5/8" depth, 5/16" terminal stud size
  • Polycarbonate body with brass terminals
  • Instructions included: one Battery Switch (4 x bolts/hardware)
  • Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position
  • Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable
  • Can be used with 8V up to 60V DC systems to isolate and secure the electrical system
  • Extra Heavy Duty - Rated: 1250 Amps Intermittent, 275 Amps continuous at 12V DC. 2-Position: ON and OFF positions

More Info

BEP 701 Battery Switches - On-Off

Search only BEP brand name
BEP 701 Battery Switches - On-Off

Current price: 26.6 USD

Saving: $6.41 (19%)


Check price and availability


Height: 2.899999997042 Inches

Length: 4.29921259404 Inches

Width: 2.99999999694 Inches

Weight: 0.3527396192 Pounds

  • Premium warranty and support
  • Robust redesign done in July 2017
  • Continuous Rating: 300A, Maximum Voltage: 48V DC
  • Make before break contact design allows switching between battery banks without power interruption
  • IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
  • Single Circuit ON-OFF. Switches a single battery to a single load group
  • Terminal Stud Size: 3x5/16” (8mm), Instructions included: one Battery Switch (4 x bolts/hardware)
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. Ignition protected
  • Can be used with 8V - 50V DC systems to isolate and secure the electrical system
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Continuous Rating: 600A, Max Voltage: 32VDC
  • Terminal Stud Size: 1/2"
  • Accepts two 4/0 AWG (95mm²) battery cables.
  • IP66 waterproof, ISO 8846 and meets ABYC requirements
  • Switches a single battery to a single load group Ignition protected - safe for installation aboard gasoline powered boats
  • 30 days full refund and 12 months Guarantee
  • Operation: 1-2-Both-Off, Rating: 200 Amps Continuous,1250Amps momentary at 12V DC
  • Durable and Compact Size. Size: 68 x 68 x 75mm. Bolt Size: 10mm.
  • Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
  • Apply to auto electronics, electrical products and all kinds of 12V/24V/48V car, boat, van, caravan, etc.
  • Terminal Stud Size: 5/16"
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Polycarbonate body with brass terminals
  • Diameter: 5.25"
  • Size: 5-1/4 inch x 2-5/8 inch
  • Capacity: 250A continuous, 360A intermittent
  • UL listed, ignition protected and CE approved
  • For use with two or more batteries and systems under 50V
  • Permits selection between batteries for starting, charging or operation in parallel
  • Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position
  • Can be used with 8V up to 60V DC systems to isolate and secure the electrical system
  • Four removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.
  • On/Off 2 positions, 12V-48V DC, Rating: 275A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Stud Size: 2x3/8" (10mm).
  • Ignition protected
  • Capacity - 250 AMPS Continuous, 360 AMPS 5 Mins. Intermittent
  • For use with 6 to 50 volt marine electrical systems
  • Dimensions: 5-1/4" diameter x 2-5/8" depth, 5/16" terminal stud size
  • Polycarbonate body with brass terminals
  • Instructions included: one Battery Switch (4 x bolts/hardware)
  • Patented contour link system, allowing it to be a standalone unit, or linked together with other similar switches Rotary dial has a spring-loaded keeper to lock the selected position
  • Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat is not in use Compact size, sleek modern appearance, sturdy and durable
  • Can be used with 8V up to 60V DC systems to isolate and secure the electrical system
  • Extra Heavy Duty - Rated: 1250 Amps Intermittent, 275 Amps continuous at 12V DC. 2-Position: ON and OFF positions
  • Tin-plated copper studs and nuts
  • Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH)
  • Designed for panel mounts. Range gives a very compact, versatile solution.

More Info

1    2    3    4    5    6    7    8    9    10