Best Brake Spreading Tools. Reviews December, 2020

JIFETOR Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper

Search only JIFETOR brand name
JIFETOR Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper

Current price: 19.99 USD


Check price and availability


  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.

More Info

DASBET Disc Brake Pad Installation Spreader Caliper Piston Spreader Tool

Search only DASBET brand name
DASBET Disc Brake Pad Installation Spreader Caliper Piston Spreader Tool

Current price: 13.99 USD


Check price and availability


Height: 2.362204722 Inches

Length: 6.8897637725 Inches

Width: 6.1023621985 Inches

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.

More Info

8MILELAKE Brake Caliper Wind Back Tool 24pc Professional Disc Brake Caliper Tool Set

Search only 8MILELAKE brand name
8MILELAKE Brake Caliper Wind Back Tool 24pc Professional Disc Brake Caliper Tool Set

Current price: 23.99 USD


Check price and availability


Height: 8.661417314 Inches

Length: 12.7952755775 Inches

Width: 2.362204722 Inches

Weight: 5.51155655 Pounds

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks

More Info

Lang Tools 279-5420 279 Brake Caliper Press

Search only Lang Tools brand name
Lang Tools 279-5420 279 Brake Caliper Press

Current price: 41.57 USD

Saving: $3.86 (8%)


Check price and availability


Height: 2.13 Inches

Length: 3.25 Inches

Width: 1.5 Inches

Weight: 1.1 Pounds

Warranty: 1 Year Limited Warranty. We guarantee our equipment for one full year from date of shipment. If any part or product manufactured is found to be defective in material or workmanship by Lang, we will at our option either repair or replace such part or product. This warranty does not apply to any part or product which is worn out, has been tampered with, or altered in any way, used in a manner inconsistent with instructions, or broken by accident or negligence.

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks
  • Size range 1. 7" - 3"
  • Made in the USA
  • Extended reversing lever allows for easy change from spreading to retracting
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers

More Info

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

Search only ABN brand name
ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

Current price: 19.99 USD

Saving: $3.00 (13%)


Check price and availability


Height: 1.79921259659 Inches

Length: 10.79921258741 Inches

Width: 2.49999999745 Inches

Weight: 1.19 Pounds

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks
  • Size range 1. 7" - 3"
  • Made in the USA
  • Extended reversing lever allows for easy change from spreading to retracting
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability; Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; Larger plates are held in place with built-in magnets for easy attachment and removal
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; Retract brake caliper press plates to fit inside the caliper cavity; Begin ratcheting slowly and steadily until the pistons have retracted completely; Retract compression plates to remove the disc brake piston tool from the caliper cavity
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles; Works on both fixed and floating calipers
  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses

More Info

Orion Motor Tech 24pcs Heavy Duty Disc Brake Piston Caliper Compressor Wind Back Rewind Tool Set for Brake Pad Replacement Reset with Storage Case, Fits Most American, European, Japanese Autos

Search only Orion Motor Tech brand name
Orion Motor Tech 24pcs Heavy Duty Disc Brake Piston Caliper Compressor Wind Back Rewind Tool Set for Brake Pad Replacement Reset with Storage Case, Fits Most American, European, Japanese Autos

Current price: 25.99 USD


Check price and availability


Height: 5.95 Inches

Length: 13.39 Inches

Width: 9.45 Inches

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks
  • Size range 1. 7" - 3"
  • Made in the USA
  • Extended reversing lever allows for easy change from spreading to retracting
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability; Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; Larger plates are held in place with built-in magnets for easy attachment and removal
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; Retract brake caliper press plates to fit inside the caliper cavity; Begin ratcheting slowly and steadily until the pistons have retracted completely; Retract compression plates to remove the disc brake piston tool from the caliper cavity
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles; Works on both fixed and floating calipers
  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses
  • TECHNICAL SUPPORT: Each kit includes a detailed user manual with an illustrated parts diagram. We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any questions, please let us know.
  • CONVENIENT CARRY CASE: Includes an ABS carrying case with pre-sized slots for every component - right and left-handed thrust bolts, 2 retaining plates, and 18 disc adapters.
  • HEAVY-DUTY DURABILITY: Carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics.
  • UNIVERSAL COMPATIBILITY: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
  • EASY OPERATION: For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.

More Info

ARES 18028 - Heavy Duty Brake Pad Spreader - Built-in Comfort Tightening Knob - Heavy-Duty Steel Construction - Solid Steel Swivel Joint for Precise and Even Compression

Search only ARES brand name
ARES 18028 - Heavy Duty Brake Pad Spreader - Built-in Comfort Tightening Knob - Heavy-Duty Steel Construction - Solid Steel Swivel Joint for Precise and Even Compression

Current price: 14.12 USD


Check price and availability


Height: 2.17 Inches

Length: 8.5 Inches

Width: 5.5 Inches

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks
  • Size range 1. 7" - 3"
  • Made in the USA
  • Extended reversing lever allows for easy change from spreading to retracting
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability; Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; Larger plates are held in place with built-in magnets for easy attachment and removal
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; Retract brake caliper press plates to fit inside the caliper cavity; Begin ratcheting slowly and steadily until the pistons have retracted completely; Retract compression plates to remove the disc brake piston tool from the caliper cavity
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles; Works on both fixed and floating calipers
  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses
  • TECHNICAL SUPPORT: Each kit includes a detailed user manual with an illustrated parts diagram. We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any questions, please let us know.
  • CONVENIENT CARRY CASE: Includes an ABS carrying case with pre-sized slots for every component - right and left-handed thrust bolts, 2 retaining plates, and 18 disc adapters.
  • HEAVY-DUTY DURABILITY: Carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics.
  • UNIVERSAL COMPATIBILITY: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
  • EASY OPERATION: For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Heavy Duty Brake Pad Spreader, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • COMMON APPLICATIONS: This heavy duty brake pad spreader is designed to be used almost universally with domestic cars and light trucks, so you'll be ready for a wide variety of applications.
  • DESIGN CONSIDERATIONS: Our Heavy Duty Brake Pad Spreader is made of heavy duty steel, so it's twice as strong as the average brake pad spreader, and the solid steel swivel joint at the tip lets compress evenly and precisely, so you can get the job done quickly.
  • SPECIFICATIONS: The ARES Heavy Duty Brake Pad Spreader is designed to let you compress your vehicle's inner brake pad and rest the piston more quickly. Designed for hand use with an ergonomic oversized comfort knob, this versatile heavy duty brake pad spreader can also be used with a 5/16-inch socket adapter for maximum ease of use.

More Info

GEARWRENCH Disc Brake Piston Tool - 3163D

Search only GEARWRENCH brand name
GEARWRENCH Disc Brake Piston Tool - 3163D

Current price: 11.89 USD


Check price and availability


Height: 5.118110231 Inches

Length: 12.1259842396 Inches

Width: 6.692913379 Inches

Weight: 0.22 Pounds

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks
  • Size range 1. 7" - 3"
  • Made in the USA
  • Extended reversing lever allows for easy change from spreading to retracting
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability; Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; Larger plates are held in place with built-in magnets for easy attachment and removal
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; Retract brake caliper press plates to fit inside the caliper cavity; Begin ratcheting slowly and steadily until the pistons have retracted completely; Retract compression plates to remove the disc brake piston tool from the caliper cavity
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles; Works on both fixed and floating calipers
  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses
  • TECHNICAL SUPPORT: Each kit includes a detailed user manual with an illustrated parts diagram. We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any questions, please let us know.
  • CONVENIENT CARRY CASE: Includes an ABS carrying case with pre-sized slots for every component - right and left-handed thrust bolts, 2 retaining plates, and 18 disc adapters.
  • HEAVY-DUTY DURABILITY: Carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics.
  • UNIVERSAL COMPATIBILITY: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
  • EASY OPERATION: For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Heavy Duty Brake Pad Spreader, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • COMMON APPLICATIONS: This heavy duty brake pad spreader is designed to be used almost universally with domestic cars and light trucks, so you'll be ready for a wide variety of applications.
  • DESIGN CONSIDERATIONS: Our Heavy Duty Brake Pad Spreader is made of heavy duty steel, so it's twice as strong as the average brake pad spreader, and the solid steel swivel joint at the tip lets compress evenly and precisely, so you can get the job done quickly.
  • SPECIFICATIONS: The ARES Heavy Duty Brake Pad Spreader is designed to let you compress your vehicle's inner brake pad and rest the piston more quickly. Designed for hand use with an ergonomic oversized comfort knob, this versatile heavy duty brake pad spreader can also be used with a 5/16-inch socket adapter for maximum ease of use.
  • Package Dimensions: 14.732 L x 5.08 H x 5.588 W (centimeters)
  • Made in Taiwan
  • Color: Black
  • Designed to rotate the parking-brake-activated PISTON back into the caliper cylinder when replacing worn pads on vehicles equipped with 4-wheel disc brakes

More Info

22pcs Disc Brake Caliper Wind Back Tool Set, Front and Rear Brake Piston Compression Tool for Disc Piston Rewind

Search only Suge brand name
22pcs Disc Brake Caliper Wind Back Tool Set, Front and Rear Brake Piston Compression Tool for Disc Piston Rewind

Current price: 21.95 USD


Check price and availability


  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks
  • Size range 1. 7" - 3"
  • Made in the USA
  • Extended reversing lever allows for easy change from spreading to retracting
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability; Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; Larger plates are held in place with built-in magnets for easy attachment and removal
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; Retract brake caliper press plates to fit inside the caliper cavity; Begin ratcheting slowly and steadily until the pistons have retracted completely; Retract compression plates to remove the disc brake piston tool from the caliper cavity
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles; Works on both fixed and floating calipers
  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses
  • TECHNICAL SUPPORT: Each kit includes a detailed user manual with an illustrated parts diagram. We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any questions, please let us know.
  • CONVENIENT CARRY CASE: Includes an ABS carrying case with pre-sized slots for every component - right and left-handed thrust bolts, 2 retaining plates, and 18 disc adapters.
  • HEAVY-DUTY DURABILITY: Carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics.
  • UNIVERSAL COMPATIBILITY: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
  • EASY OPERATION: For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Heavy Duty Brake Pad Spreader, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • COMMON APPLICATIONS: This heavy duty brake pad spreader is designed to be used almost universally with domestic cars and light trucks, so you'll be ready for a wide variety of applications.
  • DESIGN CONSIDERATIONS: Our Heavy Duty Brake Pad Spreader is made of heavy duty steel, so it's twice as strong as the average brake pad spreader, and the solid steel swivel joint at the tip lets compress evenly and precisely, so you can get the job done quickly.
  • SPECIFICATIONS: The ARES Heavy Duty Brake Pad Spreader is designed to let you compress your vehicle's inner brake pad and rest the piston more quickly. Designed for hand use with an ergonomic oversized comfort knob, this versatile heavy duty brake pad spreader can also be used with a 5/16-inch socket adapter for maximum ease of use.
  • Package Dimensions: 14.732 L x 5.08 H x 5.588 W (centimeters)
  • Made in Taiwan
  • Color: Black
  • Designed to rotate the parking-brake-activated PISTON back into the caliper cylinder when replacing worn pads on vehicles equipped with 4-wheel disc brakes
  • 【Service】100% satisfaction guarantee, If you have any issues with It, please feel free to contact us.
  • 【Blow molded case】easy to transport, storage, carry.
  • 【Durable】Made of durable carbon steel, suitable for heavy use.
  • 【Universal】Fits most vehicles of domestic, European, Japanese etc.
  • 【Design for】Assist in the brake pads replacement on your car, 4 wheel drive cars/trucks.

More Info

Capri Tools 21006 Disc Brake Pad Spreader Tool

Search only Capri Tools brand name
Capri Tools 21006 Disc Brake Pad Spreader Tool

Current price: 9.99 USD


Check price and availability


Height: 2.5 Inches

Length: 8.5 Inches

Width: 5.5 Inches

Weight: 0.7 Pounds

Warranty: Lifetime Replacement Guarantee

  • SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR brake spreader tool. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime.
  • PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compressor.
  • EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing.
  • WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need.
  • CONVENIENT TIMESAVING LABORSAVING: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
  • 【SUITABLE】 Professional and heavy duty car hand tool, suitable for private car owner DIY and also repair shops. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
  • 【VERSATILE】: Compatible for Nissan, Alfa, Audi, Fiat, Ford, GM(Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche.
  • 【FEATURE】Fitted with tommy bar but can be used with 1/2'' drive ratchet wrench or 0.83'' spanner.
  • 【INCLUDING】Chemically blackened steel spreader plates. (2"x2-1/4") Each plates, Max Spread 3-1/4".
  • 【APPLICABLE】Essential tool for retracting the brake piston to allow insertion of new brake pads.
  • Storage case and a pair of gloves included.
  • 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
  • The kit includes 18 adapters which fit a variety of modern car brands
  • Includes left and right handed thrust bolt assemblies
  • Ideal for 4 wheel drive cars/trucks
  • Size range 1. 7" - 3"
  • Made in the USA
  • Extended reversing lever allows for easy change from spreading to retracting
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability; Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; Larger plates are held in place with built-in magnets for easy attachment and removal
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; Retract brake caliper press plates to fit inside the caliper cavity; Begin ratcheting slowly and steadily until the pistons have retracted completely; Retract compression plates to remove the disc brake piston tool from the caliper cavity
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles; Works on both fixed and floating calipers
  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses
  • TECHNICAL SUPPORT: Each kit includes a detailed user manual with an illustrated parts diagram. We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any questions, please let us know.
  • CONVENIENT CARRY CASE: Includes an ABS carrying case with pre-sized slots for every component - right and left-handed thrust bolts, 2 retaining plates, and 18 disc adapters.
  • HEAVY-DUTY DURABILITY: Carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics.
  • UNIVERSAL COMPATIBILITY: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
  • EASY OPERATION: For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Heavy Duty Brake Pad Spreader, simply contact customer service for troubleshooting help, parts, replacement, or refund.
  • COMMON APPLICATIONS: This heavy duty brake pad spreader is designed to be used almost universally with domestic cars and light trucks, so you'll be ready for a wide variety of applications.
  • DESIGN CONSIDERATIONS: Our Heavy Duty Brake Pad Spreader is made of heavy duty steel, so it's twice as strong as the average brake pad spreader, and the solid steel swivel joint at the tip lets compress evenly and precisely, so you can get the job done quickly.
  • SPECIFICATIONS: The ARES Heavy Duty Brake Pad Spreader is designed to let you compress your vehicle's inner brake pad and rest the piston more quickly. Designed for hand use with an ergonomic oversized comfort knob, this versatile heavy duty brake pad spreader can also be used with a 5/16-inch socket adapter for maximum ease of use.
  • Package Dimensions: 14.732 L x 5.08 H x 5.588 W (centimeters)
  • Made in Taiwan
  • Color: Black
  • Designed to rotate the parking-brake-activated PISTON back into the caliper cylinder when replacing worn pads on vehicles equipped with 4-wheel disc brakes
  • 【Service】100% satisfaction guarantee, If you have any issues with It, please feel free to contact us.
  • 【Blow molded case】easy to transport, storage, carry.
  • 【Durable】Made of durable carbon steel, suitable for heavy use.
  • 【Universal】Fits most vehicles of domestic, European, Japanese etc.
  • 【Design for】Assist in the brake pads replacement on your car, 4 wheel drive cars/trucks.
  • High carbon steel and Chrome-Vanadium steel are mixed to create this corrosion resistant tool
  • Light trucks and domestic cars are all compatible with this tool
  • A 2 piece, heavy-duty construction makes this product highly durable
  • Apply maximum torque with this tool's large handle and slip resistant grip
  • Replace your pads faster by compressing your inner brake pad and resetting the piston

More Info

1    2    3    4    5    6    7    8    9    10