Best Car Mono Amplifiers. Reviews January, 2021

Gravity GR4000.1 Monoblock 4000 WATTS Car Audio Stereo Amplifier 1 Ohm Stable with LED Indicator Class AB Technology MOSFET PWM Power Supply Remote Level Control

Search only Gravity brand name
Gravity GR4000.1 Monoblock 4000 WATTS Car Audio Stereo Amplifier 1 Ohm Stable with LED Indicator Class AB Technology MOSFET PWM Power Supply Remote Level Control

Current price: 144.99 USD


Check price and availability


  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages

More Info

Alpine R-A75M R-Series Monoblock Subwoofer Amplifier - 750 Watts Rms Power with 0 Gauge Amplifier Kit

Search only Alpine brand name
Alpine R-A75M R-Series Monoblock Subwoofer Amplifier - 750 Watts Rms Power with 0 Gauge Amplifier Kit

Current price: 479.99 USD


Check price and availability


Height: 6 Inches

Length: 12 Inches

Width: 12 Inches

Weight: 8.05 Pounds

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms

More Info

Hifonics ZXX-3200.1D Zeus Mono Channel Car Audio Amplifier (Silver) – Class D Amp, 3200-Watt, Aluminum Heat Sink, Variable Electronic Crossover, Illuminated Logo, Bass Remote Included, 1 Ohm Stable

Search only Hifonics brand name
Hifonics ZXX-3200.1D Zeus Mono Channel Car Audio Amplifier (Silver) – Class D Amp, 3200-Watt, Aluminum Heat Sink, Variable Electronic Crossover, Illuminated Logo, Bass Remote Included, 1 Ohm Stable

Current price: 249.99 USD

Saving: $40.00 (14%)


Check price and availability


Height: 2.4 Inches

Length: 20 Inches

Width: 10 Inches

Weight: 13.3 Pounds

Warranty: 1 Year Limited Manufacturers

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.

More Info

KICKER CX400.1 400 Watt Class D Mono Amplifier for Car Audio Speakers, Black

Search only Kicker brand name
KICKER CX400.1 400 Watt Class D Mono Amplifier for Car Audio Speakers, Black

Current price: 134.96 USD


Check price and availability


Weight: 4.8 Pounds

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car

More Info

1000W Monoblock Amplifier Class D Amp Car Audio Bass Knob Audiopipe APMN-1300

Search only Audiopipe brand name
1000W Monoblock Amplifier Class D Amp Car Audio Bass Knob Audiopipe APMN-1300

Current price: 139.13 USD

Saving: $7.91 (5%)


Check price and availability


Height: 4 Inches

Length: 16 Inches

Width: 8.5 Inches

Weight: 6.9 Pounds

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Input Sensitivity: 0.2V - 5V
  • Signal-to-Noise Ratio: >70dB
  • Frequency Response: 30Hz - 180Hz
  • Bass Boost: 0dB - 12dB ; Bass Boost Frequency: 30Hz -80Hz
  • Monoblock 1000W RMS

More Info

Kicker 47KEY5001 Car Audio Smart DSP Mono Sub Amplifier Easy Auto Setup Amp

Search only Kicker brand name
Kicker 47KEY5001 Car Audio Smart DSP Mono Sub Amplifier Easy Auto Setup Amp

Current price: 249.5 USD


Check price and availability


Height: 4 Inches

Length: 12 Inches

Width: 10 Inches

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Input Sensitivity: 0.2V - 5V
  • Signal-to-Noise Ratio: >70dB
  • Frequency Response: 30Hz - 180Hz
  • Bass Boost: 0dB - 12dB ; Bass Boost Frequency: 30Hz -80Hz
  • Monoblock 1000W RMS
  • The concert quality of your factory stereo is revealed! What would take hours for a professional to achieve happens in a matter of minutes.
  • A massive 40-band equalizer improves tonality, and a 24dB crossover re-defines the capabilities of each speaker.
  • Press the selector, and the microphone goes to work. The KEY uses a powerful internal computer to deliver dramatic improvements in realism and soundstage.
  • Don’t just make your system louder - make it clearer. Make it better.

More Info

Rockville dB12 2000 Watt Peak/500w CEA rated RMS Mono 2 Ohm Amplifier Car Amp

Search only Rockville brand name
Rockville dB12 2000 Watt Peak/500w CEA rated RMS Mono 2 Ohm Amplifier Car Amp

Current price: 114.95 USD


Check price and availability


Height: 2.4 Inches

Length: 13.1 Inches

Width: 13.1 Inches

Warranty: 1 YEAR

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Input Sensitivity: 0.2V - 5V
  • Signal-to-Noise Ratio: >70dB
  • Frequency Response: 30Hz - 180Hz
  • Bass Boost: 0dB - 12dB ; Bass Boost Frequency: 30Hz -80Hz
  • Monoblock 1000W RMS
  • The concert quality of your factory stereo is revealed! What would take hours for a professional to achieve happens in a matter of minutes.
  • A massive 40-band equalizer improves tonality, and a 24dB crossover re-defines the capabilities of each speaker.
  • Press the selector, and the microphone goes to work. The KEY uses a powerful internal computer to deliver dramatic improvements in realism and soundstage.
  • Don’t just make your system louder - make it clearer. Make it better.
  • Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. 8 Volt Preamp Circuitry. Power and Protection LED Indicator. LED Illuminated Logo. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 13.1˝.
  • Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply.
  • Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 500 Watts x 1 Channel

More Info

BOSS Audio Systems R1100M Monoblock Car Amplifier - 1100 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control, Subwoofer Amplifier

Search only BOSS Audio Systems brand name
BOSS Audio Systems R1100M Monoblock Car Amplifier - 1100 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control, Subwoofer Amplifier

Current price: 69.99 USD


Check price and availability


Height: 2.25 Inches

Length: 9.13 Inches

Width: 10.44 Inches

Weight: 4.4 Pounds

Warranty: 6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Input Sensitivity: 0.2V - 5V
  • Signal-to-Noise Ratio: >70dB
  • Frequency Response: 30Hz - 180Hz
  • Bass Boost: 0dB - 12dB ; Bass Boost Frequency: 30Hz -80Hz
  • Monoblock 1000W RMS
  • The concert quality of your factory stereo is revealed! What would take hours for a professional to achieve happens in a matter of minutes.
  • A massive 40-band equalizer improves tonality, and a 24dB crossover re-defines the capabilities of each speaker.
  • Press the selector, and the microphone goes to work. The KEY uses a powerful internal computer to deliver dramatic improvements in realism and soundstage.
  • Don’t just make your system louder - make it clearer. Make it better.
  • Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. 8 Volt Preamp Circuitry. Power and Protection LED Indicator. LED Illuminated Logo. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 13.1˝.
  • Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply.
  • Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 500 Watts x 1 Channel
  • Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
  • Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety

More Info

Kicker 46CXA12001 Car Audio Class D Amp Mono 2400W Peak Sub Amplifier CXA1200.1

Search only Kicker brand name
Kicker 46CXA12001 Car Audio Class D Amp Mono 2400W Peak Sub Amplifier CXA1200.1

Current price: 314.96 USD


Check price and availability


Height: 5 Inches

Length: 17 Inches

Width: 10 Inches

Weight: 7.75 Pounds

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Input Sensitivity: 0.2V - 5V
  • Signal-to-Noise Ratio: >70dB
  • Frequency Response: 30Hz - 180Hz
  • Bass Boost: 0dB - 12dB ; Bass Boost Frequency: 30Hz -80Hz
  • Monoblock 1000W RMS
  • The concert quality of your factory stereo is revealed! What would take hours for a professional to achieve happens in a matter of minutes.
  • A massive 40-band equalizer improves tonality, and a 24dB crossover re-defines the capabilities of each speaker.
  • Press the selector, and the microphone goes to work. The KEY uses a powerful internal computer to deliver dramatic improvements in realism and soundstage.
  • Don’t just make your system louder - make it clearer. Make it better.
  • Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. 8 Volt Preamp Circuitry. Power and Protection LED Indicator. LED Illuminated Logo. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 13.1˝.
  • Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply.
  • Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 500 Watts x 1 Channel
  • Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
  • Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
  • Optional Bass Remote
  • 1 ohms: 1200 watts x 1 chan
  • 2 ohms: 1200 watts x 1 chan
  • 4 ohms: 600 watts x 1 chan
  • Mono Car Amplifier

More Info

Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1

Search only Kicker brand name
Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1

Current price: 224.96 USD


Check price and availability


Height: 9 Inches

Length: 12 Inches

Width: 4 Inches

Weight: 5.15 Pounds

  • Soft Start & Muting Overload, Thermal, Short Circuit Protection
  • Subwoofer Variable Crossover for Deep Bass Control
  • Continuously Variable 12dB/Octave High Pass & 12dB/Octave Low Pass Crossover
  • Bridgeable & TRI-Mode Operation
  • Four Class "AB" High-Current Dual Discrete Drive Stages
  • Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga blue
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass Boost (0-12 dB at 50 Hz)
  • Power output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Input Sensitivity: 0.2V - 5V
  • Signal-to-Noise Ratio: >70dB
  • Frequency Response: 30Hz - 180Hz
  • Bass Boost: 0dB - 12dB ; Bass Boost Frequency: 30Hz -80Hz
  • Monoblock 1000W RMS
  • The concert quality of your factory stereo is revealed! What would take hours for a professional to achieve happens in a matter of minutes.
  • A massive 40-band equalizer improves tonality, and a 24dB crossover re-defines the capabilities of each speaker.
  • Press the selector, and the microphone goes to work. The KEY uses a powerful internal computer to deliver dramatic improvements in realism and soundstage.
  • Don’t just make your system louder - make it clearer. Make it better.
  • Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. 8 Volt Preamp Circuitry. Power and Protection LED Indicator. LED Illuminated Logo. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 13.1˝.
  • Designed, Engineered, Developed, and Quality Controlled in the USA. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch 0-180 degrees. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Line Input (This is to connect the amplifier to your receiver).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1000 Watts x 1 Channel. 4 Ohm: 600 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. High-Speed MOSFET Power Supply.
  • Rockville dB12 2000 Watt/1000w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 500 Watts x 1 Channel
  • Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
  • Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
  • Optional Bass Remote
  • 1 ohms: 1200 watts x 1 chan
  • 2 ohms: 1200 watts x 1 chan
  • 4 ohms: 600 watts x 1 chan
  • Mono Car Amplifier
  • 24dB subsonic filter for protection from potentially damaging frequencies
  • Variable 12dB crossovers provides control to dial in perfect sound
  • KickEQ 6dB variable bass boost for those additional low frequencies
  • Variable 12dB crossovers provides control to dial in perfect sound
  • Efficient Class-D amplifier

More Info

1    2    3    4    5    6    7    8    9    10