Best Carriage Screws . Reviews November, 2020

(5 Sets) 5/16-18x5" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

Search only Fullerkreg brand name
(5 Sets) 5/16-18x5

Current price: 10.99 USD


Check price and availability


  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.

More Info

SNUG Fasteners (SNG291) Ten (10) 1/4-20 x 6 Long Carriage Bolts Set w/Nuts & Washers

Search only SNUG Fasteners brand name
SNUG Fasteners (SNG291) Ten (10) 1/4-20 x 6 Long Carriage Bolts Set w/Nuts & Washers

Current price: 13.21 USD


Check price and availability


Height: 0.5 Inches

Length: 4 Inches

Width: 6 Inches

Warranty: 5 Years

  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck

More Info

RuiLing 10 Sets Screw Bolts with Wing Nut Kit Zinc Plated Carbon Steel Mounting Hardware Fitting Fastenings- 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt

Search only RuiLing brand name
RuiLing 10 Sets Screw Bolts with Wing Nut Kit Zinc Plated Carbon Steel Mounting Hardware Fitting Fastenings- 10pcs 1/4

Current price: 7.99 USD


Check price and availability


  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.

More Info

SNUG Fasteners Ten (10) 1/4-20 x 2 Long Carriage Bolts Set w/Nuts & Washers (SNG283)

Search only SNUG Fasteners brand name
SNUG Fasteners Ten (10) 1/4-20 x 2 Long Carriage Bolts Set w/Nuts & Washers (SNG283)

Current price: 10.99 USD


Check price and availability


Height: 2.5 Inches

Length: 4.5 Inches

Width: 3.5 Inches

Weight: 0.41 Pounds

  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.
  • Snug Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck

More Info

RuiLing 10 Set Carriage Bolt Sets 304 Stainless Steel Carriage Screw Hex Nut and Flat Washer Kits 1/4-20 Inches

Search only RuiLing? brand name
RuiLing 10 Set Carriage Bolt Sets 304 Stainless Steel Carriage Screw Hex Nut and Flat Washer Kits 1/4-20 Inches

Current price: 10.99 USD


Check price and availability


  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.
  • Snug Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Package Includes: 10pcs 1/4-20" Carriage Bolts + 10pcs 1/4-20" Hex Nuts + 10pcs 1/4" (7*16*1.5mm) Flat Washers
  • Usage: These carriage bolts, hex nuts and flat washers are all made of stainless steel, produced with the same standard, could be tightened well, easy to fix and install.
  • Installation: Easy to fix and install. Rotate the square neck bolt with a wrench for tightening to complete the installation.
  • Occasion: Suitable for indoor and outdoor, it will never rust even in damp environment with high ability of oxidation resistance.
  • Material: High quality 304 stainless steel, high hardness, corrosion resistance, anti-rust, beautiful and practical.

More Info

(5 pc)5/16-18 x 4" Long Square-Neck Carriage Bolts Set w/Nuts & Washers,Zinc-Plated,Carbon Steel Grade 2,by Fullerkreg

Search only Fullerkreg brand name
(5 pc)5/16-18 x 4

Current price: 8.99 USD


Check price and availability


  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.
  • Snug Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Package Includes: 10pcs 1/4-20" Carriage Bolts + 10pcs 1/4-20" Hex Nuts + 10pcs 1/4" (7*16*1.5mm) Flat Washers
  • Usage: These carriage bolts, hex nuts and flat washers are all made of stainless steel, produced with the same standard, could be tightened well, easy to fix and install.
  • Installation: Easy to fix and install. Rotate the square neck bolt with a wrench for tightening to complete the installation.
  • Occasion: Suitable for indoor and outdoor, it will never rust even in damp environment with high ability of oxidation resistance.
  • Material: High quality 304 stainless steel, high hardness, corrosion resistance, anti-rust, beautiful and practical.
  • Package includes ten each of bolts, hex nuts & washers
  • Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 5/16 inch and lengths is 4 inch.
  • Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee
  • About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening.
  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole.

More Info

SNUG Fasteners (SNG329) Ten (10) 3/8-16 x 4 Long Carriage Bolts Set w/Nuts & Washers

Search only SNUG Fasteners brand name
SNUG Fasteners (SNG329) Ten (10) 3/8-16 x 4 Long Carriage Bolts Set w/Nuts & Washers

Current price: 14.21 USD


Check price and availability


Height: 0.5 Inches

Length: 4 Inches

Width: 6 Inches

Weight: 1.201076976 Pounds

Warranty: 5 Years

  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.
  • Snug Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Package Includes: 10pcs 1/4-20" Carriage Bolts + 10pcs 1/4-20" Hex Nuts + 10pcs 1/4" (7*16*1.5mm) Flat Washers
  • Usage: These carriage bolts, hex nuts and flat washers are all made of stainless steel, produced with the same standard, could be tightened well, easy to fix and install.
  • Installation: Easy to fix and install. Rotate the square neck bolt with a wrench for tightening to complete the installation.
  • Occasion: Suitable for indoor and outdoor, it will never rust even in damp environment with high ability of oxidation resistance.
  • Material: High quality 304 stainless steel, high hardness, corrosion resistance, anti-rust, beautiful and practical.
  • Package includes ten each of bolts, hex nuts & washers
  • Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 5/16 inch and lengths is 4 inch.
  • Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee
  • About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening.
  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole.
  • SNUG Fasteners are always backed by a 100% satisfaction guarantee
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck

More Info

Stainless 1/4-20 x 3" Carriage Bolt (3/4" to 5" Lengths Available in Listing), 18-8 Stainless Steel,50 Pieces (1/4-20x3)

Search only Chenango Supply brand name
Stainless 1/4-20 x 3

Current price: 21.99 USD


Check price and availability


  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.
  • Snug Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Package Includes: 10pcs 1/4-20" Carriage Bolts + 10pcs 1/4-20" Hex Nuts + 10pcs 1/4" (7*16*1.5mm) Flat Washers
  • Usage: These carriage bolts, hex nuts and flat washers are all made of stainless steel, produced with the same standard, could be tightened well, easy to fix and install.
  • Installation: Easy to fix and install. Rotate the square neck bolt with a wrench for tightening to complete the installation.
  • Occasion: Suitable for indoor and outdoor, it will never rust even in damp environment with high ability of oxidation resistance.
  • Material: High quality 304 stainless steel, high hardness, corrosion resistance, anti-rust, beautiful and practical.
  • Package includes ten each of bolts, hex nuts & washers
  • Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 5/16 inch and lengths is 4 inch.
  • Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee
  • About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening.
  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole.
  • SNUG Fasteners are always backed by a 100% satisfaction guarantee
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • 50 Pieces
  • Great corrosion resistance for outside applications
  • Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B
  • 300 Series Stainless Steel, (18-8)

More Info

Genie 37845R,S Screw Drive Carriage Assembly, Genuine Genie Part

Search only Genie brand name
Genie 37845R,S Screw Drive Carriage Assembly, Genuine Genie Part

Current price: 23.25 USD


Check price and availability


  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.
  • Snug Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Package Includes: 10pcs 1/4-20" Carriage Bolts + 10pcs 1/4-20" Hex Nuts + 10pcs 1/4" (7*16*1.5mm) Flat Washers
  • Usage: These carriage bolts, hex nuts and flat washers are all made of stainless steel, produced with the same standard, could be tightened well, easy to fix and install.
  • Installation: Easy to fix and install. Rotate the square neck bolt with a wrench for tightening to complete the installation.
  • Occasion: Suitable for indoor and outdoor, it will never rust even in damp environment with high ability of oxidation resistance.
  • Material: High quality 304 stainless steel, high hardness, corrosion resistance, anti-rust, beautiful and practical.
  • Package includes ten each of bolts, hex nuts & washers
  • Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 5/16 inch and lengths is 4 inch.
  • Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee
  • About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening.
  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole.
  • SNUG Fasteners are always backed by a 100% satisfaction guarantee
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • 50 Pieces
  • Great corrosion resistance for outside applications
  • Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B
  • 300 Series Stainless Steel, (18-8)
  • Genie 37845R,S Screw Drive Carriage Assembly, Gen

More Info

DYWISHKEY 60 Pieces 1/4-20 x 3/8" 1/2" 5/8" 3/4" 1" Stainless Steel 304 UNC Threads Hex Button Head Cap Screws Bolts and Nuts Assortment Kit with Hex Wrench

Search only DYWISHKEY brand name
DYWISHKEY 60 Pieces 1/4-20 x 3/8

Current price: 10.99 USD


Check price and availability


  • Package includes ten each of bolts, hex nuts , Flat & Lock washers
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard)
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head.
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together.
  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners.
  • SNUG Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Mainly used for the home and office appliance, communications equipment, automotive industries, ship assembly and other other machinery industry etc. devices which require frequent dis-assembly maintenance.
  • Wing nut specially designed for tighten operation by bare hands instead of using a screwdriver, butterfly shaped head, increasing the transverse bearing surface, makes hand twisting more efficient.
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable.
  • Made of high quality zinc plated carbon steel, environment protection, high hardness, non-deformation, rust and corrosion resistance, suitable for indoor, outdoor or humid environment, long service life.
  • Quantity and Dimension: Pack of 10 sets screw Bolts with Wing Nut Kit, including 10pcs 1/4"-20 Hand Tighten Wing Nuts + 10pcs 1/4"-20 x 2-1/2" Phillips Head Screw Bolt.
  • Snug Fasteners are always backed by a 100% satisfaction
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • Package Includes: 10pcs 1/4-20" Carriage Bolts + 10pcs 1/4-20" Hex Nuts + 10pcs 1/4" (7*16*1.5mm) Flat Washers
  • Usage: These carriage bolts, hex nuts and flat washers are all made of stainless steel, produced with the same standard, could be tightened well, easy to fix and install.
  • Installation: Easy to fix and install. Rotate the square neck bolt with a wrench for tightening to complete the installation.
  • Occasion: Suitable for indoor and outdoor, it will never rust even in damp environment with high ability of oxidation resistance.
  • Material: High quality 304 stainless steel, high hardness, corrosion resistance, anti-rust, beautiful and practical.
  • Package includes ten each of bolts, hex nuts & washers
  • Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 5/16 inch and lengths is 4 inch.
  • Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee
  • About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening.
  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole.
  • SNUG Fasteners are always backed by a 100% satisfaction guarantee
  • Suitable for indoor or outdoor use
  • Zinc plated for corrosion resistance
  • Package includes ten each of bolts, hex nuts & washers
  • Round domed head with square neck
  • 50 Pieces
  • Great corrosion resistance for outside applications
  • Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B
  • 300 Series Stainless Steel, (18-8)
  • Genie 37845R,S Screw Drive Carriage Assembly, Gen
  • 【WIDE APPLICATIONS】--- DYWISHKEY Hex Button Head Screws and Nuts Kit Serves a wide range of use and for professionals, amateurs, landlords, repairmen, other DIY . The set is perfect to replace broken and missing screws. When you are mad for the missing bolts, it is a perfect friend for you. The kit has lots of different sizes, which can meet the maximum of requirement for you.
  • 【PACKAGE】--- All of Screws and Nuts are packed in a durable and sturdy Box to efficiently bear the weight of the whole package. In order to avoid the screws being scattered or lost during use, we specially package for each different type of screws for your convenience and storage. Not only give you the best product, but also the best storage system for them.
  • 【MATERIAL】--- Made of high quality 304 stainless steel, which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using.
  • 【DETAILED DIMENSION】--- Screw Head Style: Button; Screw Drive Style: Hex Socket, Hex Size: 5/32"; Head Diameter: 7/16"; Head Height: 1/8"; Thread Pitch: 20 Threads Per Inch; Thread Diameter: 1/4"; Material: Stainless Steel 304; Color: Silver Tone
  • 【SIZES】--- 1/4-20 x 3/8", 1/4-20 x 1/2", 1/4-20 x 5/8", 1/4-20 x 3/4", 1/4-20 x 1", total 5 sizes hex button head cap bolts screws. According with standardized American system. Different sizes can meet your different needs.

More Info

1    2    3    4    5    6    7    8    9    10