Affordable Chamfer Gauges. Reviews January, 2021, page 6

Leviton 84401-40 1-Gang Decora/GFCI Device Decora Wallplate , Device Mount, Stainless Steel

More from Garden & Outdoor
Search only Leviton brand name
Leviton 84401-40 1-Gang Decora/GFCI Device Decora Wallplate , Device Mount, Stainless Steel

Current price: 3.99 USD

Saving: $6.79 (63%)


Check price and availability


Height: 11.62 Inches

Length: 18 Inches

Width: 15.5 Inches

Weight: 0.1 Pounds

Warranty: Limited ten year warranty

  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes

More Info

Kreg PRS1025 Router Table Top

More from Garden & Outdoor
Search only KREG brand name
Kreg PRS1025 Router Table Top

Current price: 189 USD


Check price and availability


Height: 2.75 Inches

Length: 26.75 Inches

Width: 35 Inches

Weight: 27 Pounds

  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top

More Info

Oregon 91PX056G 56 Drive Link Chamfer Chisel Xtra Guard 3/8-Inch Pitch Low Kickback Saw Chain

More from Garden & Outdoor
Search only Oregon brand name
Oregon 91PX056G 56 Drive Link Chamfer Chisel Xtra Guard 3/8-Inch Pitch Low Kickback Saw Chain

Current price: 14.99 USD


Check price and availability


Height: 6 Inches

Length: 3.5 Inches

Width: 1 Inches

Weight: 1.46 Pounds

  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56

More Info

McJ Tools Reloading 0.163" and 0.205" Primer Pocket Cleaner HSS M2 Case Prep Essentials Tools for Reloading, Ideal for Pro Hunters, DIY Fans, Shooting Sport Lovers

More from Garden & Outdoor
Search only McJ Tools brand name
McJ Tools Reloading 0.163

Current price: 18.99 USD


Check price and availability


Height: 1.1811 Inches

Length: 0.55118 Inches

Width: 0.55118 Inches

  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
  • Made of M2 High Speed Steel
  • Covers both small and large primer pockets
  • High precision and tough durability
  • Simple and ease to use

More Info

Ruvati 30 x 22 inch Drop-in Tight Radius Topmount 16 Gauge Stainless Steel Kitchen Sink Single Bowl - RVH8009

More from Garden & Outdoor
Search only Ruvati brand name
Ruvati 30 x 22 inch Drop-in Tight Radius Topmount 16 Gauge Stainless Steel Kitchen Sink Single Bowl - RVH8009

Current price: 299 USD


Check price and availability


  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
  • Made of M2 High Speed Steel
  • Covers both small and large primer pockets
  • High precision and tough durability
  • Simple and ease to use
  • Included in box: Sink, Bottom Rinse Grid, Decorative Drain Cover, Basket Strainer Drain assembly, Cutout Template, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA
  • Exterior dimensions: 30" (wide) x 22" (front-to-back) | Interior dimensions: 28" (wide) x 18" (front-to-back) x 10" (bowl depth) | Standard 3.5" drain openings will fit any garbage disposal unit | Comes pre-drilled with 2 holes for faucet and soap dispenser installation
  • Heavy duty soundGUARD undercoating and thick rubber PADDING to minimize noise and reduce condensation | SLOPED bottom with DRAIN GROOVES to allow complete water drainage | edgeX 10mm Tight Radius - Ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look
  • Commercial grade BRUSHED FINISH - Easy to clean and long-lasting. Unlike satin finish, our brushed-finish hides scratches and matches well with your kitchen appliances
  • Topmount Installation: 1-inch wide and 1/4-inch high rim all around for a solid overmount look | 16 GAUGE thick premium T-304 grade stainless steel (18/10 Chromium/Nickel) - 37% thicker than most standard kitchen sinks

More Info

2 Pack, Oregon 90PX044G Low Profile 3/8-Inch Pitch 0.043-Inch Gauge 44-Drive Link Saw Chain, For Stihl 61PMMC3 44, 12" Bar

More from Garden & Outdoor
Search only Oregon brand name
2 Pack, Oregon 90PX044G Low Profile 3/8-Inch Pitch 0.043-Inch Gauge 44-Drive Link Saw Chain, For Stihl 61PMMC3 44, 12

Current price: 19.3 USD

Saving: $1.70 (8%)


Check price and availability


  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
  • Made of M2 High Speed Steel
  • Covers both small and large primer pockets
  • High precision and tough durability
  • Simple and ease to use
  • Included in box: Sink, Bottom Rinse Grid, Decorative Drain Cover, Basket Strainer Drain assembly, Cutout Template, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA
  • Exterior dimensions: 30" (wide) x 22" (front-to-back) | Interior dimensions: 28" (wide) x 18" (front-to-back) x 10" (bowl depth) | Standard 3.5" drain openings will fit any garbage disposal unit | Comes pre-drilled with 2 holes for faucet and soap dispenser installation
  • Heavy duty soundGUARD undercoating and thick rubber PADDING to minimize noise and reduce condensation | SLOPED bottom with DRAIN GROOVES to allow complete water drainage | edgeX 10mm Tight Radius - Ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look
  • Commercial grade BRUSHED FINISH - Easy to clean and long-lasting. Unlike satin finish, our brushed-finish hides scratches and matches well with your kitchen appliances
  • Topmount Installation: 1-inch wide and 1/4-inch high rim all around for a solid overmount look | 16 GAUGE thick premium T-304 grade stainless steel (18/10 Chromium/Nickel) - 37% thicker than most standard kitchen sinks
  • Standard Sequence; Recommended Bar Lengths: Up to 16in. (40cm) Recommended Saw Sizes: Up to 42cc
  • Low-vibration chamfer chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
  • Always install 90PX chains on a .043" gauge Double Guard bar (MLE part numbers) to obtain all the advantages of the Micro-Lite system
  • Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
  • 2 Oregon 90PX044G 3/8" Low Profile .043" Gauge 44 Drive Link Saw Chains for 12" Bar

More Info

Freud Flush, 1/8",1/4",5/16",3/8",7/16",1/2" Depth Rabbeting Bit Set with interchangeable bearings with 1/4" Shank (32-504)

More from Garden & Outdoor
Search only Freud brand name
Freud Flush, 1/8

Current price: 45.72 USD


Check price and availability


Height: 4.5 Inches

Length: 5.8 Inches

Width: 4 Inches

Weight: 0.19 Pounds

  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
  • Made of M2 High Speed Steel
  • Covers both small and large primer pockets
  • High precision and tough durability
  • Simple and ease to use
  • Included in box: Sink, Bottom Rinse Grid, Decorative Drain Cover, Basket Strainer Drain assembly, Cutout Template, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA
  • Exterior dimensions: 30" (wide) x 22" (front-to-back) | Interior dimensions: 28" (wide) x 18" (front-to-back) x 10" (bowl depth) | Standard 3.5" drain openings will fit any garbage disposal unit | Comes pre-drilled with 2 holes for faucet and soap dispenser installation
  • Heavy duty soundGUARD undercoating and thick rubber PADDING to minimize noise and reduce condensation | SLOPED bottom with DRAIN GROOVES to allow complete water drainage | edgeX 10mm Tight Radius - Ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look
  • Commercial grade BRUSHED FINISH - Easy to clean and long-lasting. Unlike satin finish, our brushed-finish hides scratches and matches well with your kitchen appliances
  • Topmount Installation: 1-inch wide and 1/4-inch high rim all around for a solid overmount look | 16 GAUGE thick premium T-304 grade stainless steel (18/10 Chromium/Nickel) - 37% thicker than most standard kitchen sinks
  • Standard Sequence; Recommended Bar Lengths: Up to 16in. (40cm) Recommended Saw Sizes: Up to 42cc
  • Low-vibration chamfer chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
  • Always install 90PX chains on a .043" gauge Double Guard bar (MLE part numbers) to obtain all the advantages of the Micro-Lite system
  • Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
  • 2 Oregon 90PX044G 3/8" Low Profile .043" Gauge 44 Drive Link Saw Chains for 12" Bar
  • Use on hand-held and table-mounted portable routers.
  • Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • Wrench included.
  • 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.
  • Overall Dia. (D) 1-3/8", Carbide Height (h) 1/2", 1/4" Shank

More Info

6-9 Inch Carbon Fiber Swivel Benchrest Shooting Bipod Tactical Hunting Sniper Rifle Bi-pod

More from Garden & Outdoor
Search only Freelight brand name
6-9 Inch Carbon Fiber Swivel Benchrest Shooting Bipod Tactical Hunting Sniper Rifle Bi-pod

Current price: 32.99 USD


Check price and availability


Weight: 0.5 Kilograms

  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
  • Made of M2 High Speed Steel
  • Covers both small and large primer pockets
  • High precision and tough durability
  • Simple and ease to use
  • Included in box: Sink, Bottom Rinse Grid, Decorative Drain Cover, Basket Strainer Drain assembly, Cutout Template, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA
  • Exterior dimensions: 30" (wide) x 22" (front-to-back) | Interior dimensions: 28" (wide) x 18" (front-to-back) x 10" (bowl depth) | Standard 3.5" drain openings will fit any garbage disposal unit | Comes pre-drilled with 2 holes for faucet and soap dispenser installation
  • Heavy duty soundGUARD undercoating and thick rubber PADDING to minimize noise and reduce condensation | SLOPED bottom with DRAIN GROOVES to allow complete water drainage | edgeX 10mm Tight Radius - Ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look
  • Commercial grade BRUSHED FINISH - Easy to clean and long-lasting. Unlike satin finish, our brushed-finish hides scratches and matches well with your kitchen appliances
  • Topmount Installation: 1-inch wide and 1/4-inch high rim all around for a solid overmount look | 16 GAUGE thick premium T-304 grade stainless steel (18/10 Chromium/Nickel) - 37% thicker than most standard kitchen sinks
  • Standard Sequence; Recommended Bar Lengths: Up to 16in. (40cm) Recommended Saw Sizes: Up to 42cc
  • Low-vibration chamfer chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
  • Always install 90PX chains on a .043" gauge Double Guard bar (MLE part numbers) to obtain all the advantages of the Micro-Lite system
  • Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
  • 2 Oregon 90PX044G 3/8" Low Profile .043" Gauge 44 Drive Link Saw Chains for 12" Bar
  • Use on hand-held and table-mounted portable routers.
  • Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • Wrench included.
  • 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.
  • Overall Dia. (D) 1-3/8", Carbide Height (h) 1/2", 1/4" Shank
  • ⭐Mounts onto rifles with sling stud or with picatinny rail via adapter (sold seperately, search B012ZQSWYC, Add Both To Cart, it'll save 8%)
  • ⭐The surface of this carbon fiber bipod is more slippery, the pattern looks more stylish. From different perspective,the surface will reflect various pattern,which makes your bipod distinguish from others.It feels better and experiences better, brings you unprecedented ease.
  • ⭐Swivel style from side to side by Pivot Leg, This function enable you to rotate the gun from side to side and compensate for ground that is un-level up to 20 degrees. Pod Lock replaces the thumbnut on pivoting bipods to make locking them down easier
  • ⭐With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
  • ⭐Combined with double Carbon fiber rods of each legs, this bipod is lighter than metal aluminum, but strength is higher than steel. Designed for real caliber, no collapse.

More Info

Amazon Basics Polycarbonate Office Carpet Chair Mat, With Lip, for Thick Carpets, 47" x 59"

More from Garden & Outdoor
Search only Amazon Basics brand name
Amazon Basics Polycarbonate Office Carpet Chair Mat, With Lip, for Thick Carpets, 47

Current price: 85.99 USD


Check price and availability


Height: 59.06 Inches

Length: 47.24 Inches

Width: 0.11 Inches

Warranty: 1 year.

  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
  • Made of M2 High Speed Steel
  • Covers both small and large primer pockets
  • High precision and tough durability
  • Simple and ease to use
  • Included in box: Sink, Bottom Rinse Grid, Decorative Drain Cover, Basket Strainer Drain assembly, Cutout Template, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA
  • Exterior dimensions: 30" (wide) x 22" (front-to-back) | Interior dimensions: 28" (wide) x 18" (front-to-back) x 10" (bowl depth) | Standard 3.5" drain openings will fit any garbage disposal unit | Comes pre-drilled with 2 holes for faucet and soap dispenser installation
  • Heavy duty soundGUARD undercoating and thick rubber PADDING to minimize noise and reduce condensation | SLOPED bottom with DRAIN GROOVES to allow complete water drainage | edgeX 10mm Tight Radius - Ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look
  • Commercial grade BRUSHED FINISH - Easy to clean and long-lasting. Unlike satin finish, our brushed-finish hides scratches and matches well with your kitchen appliances
  • Topmount Installation: 1-inch wide and 1/4-inch high rim all around for a solid overmount look | 16 GAUGE thick premium T-304 grade stainless steel (18/10 Chromium/Nickel) - 37% thicker than most standard kitchen sinks
  • Standard Sequence; Recommended Bar Lengths: Up to 16in. (40cm) Recommended Saw Sizes: Up to 42cc
  • Low-vibration chamfer chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
  • Always install 90PX chains on a .043" gauge Double Guard bar (MLE part numbers) to obtain all the advantages of the Micro-Lite system
  • Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
  • 2 Oregon 90PX044G 3/8" Low Profile .043" Gauge 44 Drive Link Saw Chains for 12" Bar
  • Use on hand-held and table-mounted portable routers.
  • Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • Wrench included.
  • 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.
  • Overall Dia. (D) 1-3/8", Carbide Height (h) 1/2", 1/4" Shank
  • ⭐Mounts onto rifles with sling stud or with picatinny rail via adapter (sold seperately, search B012ZQSWYC, Add Both To Cart, it'll save 8%)
  • ⭐The surface of this carbon fiber bipod is more slippery, the pattern looks more stylish. From different perspective,the surface will reflect various pattern,which makes your bipod distinguish from others.It feels better and experiences better, brings you unprecedented ease.
  • ⭐Swivel style from side to side by Pivot Leg, This function enable you to rotate the gun from side to side and compensate for ground that is un-level up to 20 degrees. Pod Lock replaces the thumbnut on pivoting bipods to make locking them down easier
  • ⭐With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
  • ⭐Combined with double Carbon fiber rods of each legs, this bipod is lighter than metal aluminum, but strength is higher than steel. Designed for real caliber, no collapse.
  • 47" x 59" Rectangular with Lip. Backed by Basics 1-year limited
  • Gripper back under side for maximum stability on carpeted flooring. Lightly textured top surface for controlled chair movement. Free of phthalates, tin, lead and cadmium for peace of mind. No emissions. No odor
  • Incredibly durable and hard wearing mats for long-life protection. Polycarbonate will instantly flatten and stays flat in use Unlike some other plastic such as vinyl
  • Excellent clear protection around desk and computer workstation carpet and Rug surfaces from chair caster or wheel based chair damage. Easy to clean, no chemicals needed for best results
  • High gauge polycarbonate floor protectors provide a high impact resistant, easy glide rolling surface and will not curl, cup or flex on carpeted floors or rugs over 0.75" Thick

More Info

Litorange 2 PCS Metals Brass Pipe Fitting Barstock Male Branch Tee T Adapter 1/4" NPT Female x 1/4" NPT Male x 1/4" NPT Female (Pack of 2)

More from Garden & Outdoor
Search only Litorange brand name
Litorange 2 PCS Metals Brass Pipe Fitting Barstock Male Branch Tee T Adapter 1/4

Current price: 11.99 USD


Check price and availability


  • Underwriter Laboratories listed, Canadian Standards Association certified
  • Mounting Screws on One-Gang Thermoplastic (Nylon) are Preinstalled and Captive
  • Color-Matched Mounting Screws Supplied. Wallplate shipped with blue protective film. Remove to expose stainless steel finish
  • Smooth Face and Rounded Edges Resist Dust Accumulation
  • Accent any Wall Covering with a Wide Selection of Colors and Finishes
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge
  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations
  • Router Table Top
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
  • For saw sizes up to 42 cc
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life
  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
  • Made of M2 High Speed Steel
  • Covers both small and large primer pockets
  • High precision and tough durability
  • Simple and ease to use
  • Included in box: Sink, Bottom Rinse Grid, Decorative Drain Cover, Basket Strainer Drain assembly, Cutout Template, Mounting Clips and Installation Guide | Limited Lifetime Warranty - Ruvati USA
  • Exterior dimensions: 30" (wide) x 22" (front-to-back) | Interior dimensions: 28" (wide) x 18" (front-to-back) x 10" (bowl depth) | Standard 3.5" drain openings will fit any garbage disposal unit | Comes pre-drilled with 2 holes for faucet and soap dispenser installation
  • Heavy duty soundGUARD undercoating and thick rubber PADDING to minimize noise and reduce condensation | SLOPED bottom with DRAIN GROOVES to allow complete water drainage | edgeX 10mm Tight Radius - Ruvati's unique 10mm radius inside corners offer a slightly curved corner for easy cleaning while at the same time retaining the resolutely modern look
  • Commercial grade BRUSHED FINISH - Easy to clean and long-lasting. Unlike satin finish, our brushed-finish hides scratches and matches well with your kitchen appliances
  • Topmount Installation: 1-inch wide and 1/4-inch high rim all around for a solid overmount look | 16 GAUGE thick premium T-304 grade stainless steel (18/10 Chromium/Nickel) - 37% thicker than most standard kitchen sinks
  • Standard Sequence; Recommended Bar Lengths: Up to 16in. (40cm) Recommended Saw Sizes: Up to 42cc
  • Low-vibration chamfer chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability
  • Always install 90PX chains on a .043" gauge Double Guard bar (MLE part numbers) to obtain all the advantages of the Micro-Lite system
  • Narrow .043" gauge helps reduce the weight of the bar-chain combination approximately 15%
  • 2 Oregon 90PX044G 3/8" Low Profile .043" Gauge 44 Drive Link Saw Chains for 12" Bar
  • Use on hand-held and table-mounted portable routers.
  • Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • Wrench included.
  • 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits.
  • Overall Dia. (D) 1-3/8", Carbide Height (h) 1/2", 1/4" Shank
  • ⭐Mounts onto rifles with sling stud or with picatinny rail via adapter (sold seperately, search B012ZQSWYC, Add Both To Cart, it'll save 8%)
  • ⭐The surface of this carbon fiber bipod is more slippery, the pattern looks more stylish. From different perspective,the surface will reflect various pattern,which makes your bipod distinguish from others.It feels better and experiences better, brings you unprecedented ease.
  • ⭐Swivel style from side to side by Pivot Leg, This function enable you to rotate the gun from side to side and compensate for ground that is un-level up to 20 degrees. Pod Lock replaces the thumbnut on pivoting bipods to make locking them down easier
  • ⭐With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
  • ⭐Combined with double Carbon fiber rods of each legs, this bipod is lighter than metal aluminum, but strength is higher than steel. Designed for real caliber, no collapse.
  • 47" x 59" Rectangular with Lip. Backed by Basics 1-year limited
  • Gripper back under side for maximum stability on carpeted flooring. Lightly textured top surface for controlled chair movement. Free of phthalates, tin, lead and cadmium for peace of mind. No emissions. No odor
  • Incredibly durable and hard wearing mats for long-life protection. Polycarbonate will instantly flatten and stays flat in use Unlike some other plastic such as vinyl
  • Excellent clear protection around desk and computer workstation carpet and Rug surfaces from chair caster or wheel based chair damage. Easy to clean, no chemicals needed for best results
  • High gauge polycarbonate floor protectors provide a high impact resistant, easy glide rolling surface and will not curl, cup or flex on carpeted floors or rugs over 0.75" Thick
  • ★ 【Package Include】: 2 PCS 1/4" Female x 1/4" Male x 1/4" NPT Female Tee. Comes with 1 year guarantee.
  • ★ 【Function】: Barstock tee with three openings for connecting and branching three pipes, can be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections as well as air tools, with a wide range of uses.
  • ★ 【Temperature Range】: Operating temperatures range from -53°C to 121°C (-65 to 250 Degree F). Max Pressure: 150 PSI WOG. Tee with three openings for connecting and branching three pipes.
  • ★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
  • ★ 【Material】: Heavy Duty Brass,strong and durable. Connection: NPT Female x NPT Female x NPT Male.

More Info

1    2    3    4    5    6    7    8    9    10