Best Chassis Kits. Reviews December, 2020

Superlift Suspension | 40009 | 2 inch GM Front Leveling Kit - 1999-2006 1500 2WD with Front Coil Suspension

Search only Superlift Suspension brand name
Superlift Suspension | 40009 | 2 inch GM Front Leveling Kit - 1999-2006 1500 2WD with Front Coil Suspension

Current price: 71.91 USD


Check price and availability


Height: 5.5 Inches

Length: 16 Inches

Width: 8 Inches

Weight: 3 Pounds

Warranty: Limited Lifetime

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;

More Info

Supreme Suspensions - U-Bolt Flip Kit for 1999-2006 Toyota Tundra [2WD 4WD] Steel Striker Plates and Upgraded 5/8" U-Bolts PRO KIT

Search only Supreme Suspensions brand name
Supreme Suspensions - U-Bolt Flip Kit for 1999-2006 Toyota Tundra [2WD 4WD] Steel Striker Plates and Upgraded 5/8

Current price: 99.95 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)

More Info

MOOG Chassis Products K200044 Control Arm Bushing Kit

Search only MOOG Steering & Suspension brand name
MOOG Chassis Products K200044 Control Arm Bushing Kit

Current price: 13.86 USD


Check price and availability


Height: 3.3 Inches

Length: 5.5 Inches

Width: 4.2 Inches

Weight: 1.45 Pounds

Warranty: Limited Warranty

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance

More Info

MOOG Chassis Products K90455 Stabilizer Bar Link Kit

Search only MOOG brand name
MOOG Chassis Products K90455 Stabilizer Bar Link Kit

Current price: 24.52 USD


Check price and availability


Height: 2.8 Inches

Length: 5.4 Inches

Width: 3.3 Inches

Weight: 0.85 Pounds

Warranty: Limited Warranty

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
  • Durable, all metal construction for longer life.
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement.
  • Moog engineered steel composition results in a stronger component
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.

More Info

Painless Performance 70920 PowerBraid Split Braided Sleeving Chassis Kit

Search only Painless brand name
Painless Performance 70920 PowerBraid Split Braided Sleeving Chassis Kit

Current price: 143.99 USD

Saving: $16.00 (10%)


Check price and availability


Height: 6.75 Inches

Length: 15.5 Inches

Width: 10.5 Inches

Weight: 2 Pounds

Warranty: 1-Year Limited

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
  • Durable, all metal construction for longer life.
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement.
  • Moog engineered steel composition results in a stronger component
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Continuous temperature rating -94° to 257 °F; Melting point 482°F
  • Split loom makes it easy to apply to wiring that is already installed; Minimum 25% overlap keeps Power Braid secure over wires, hoses, and more
  • Flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables
  • Allows you to keep your wiring routed and secured away from moving parts, high heat and from abrasion, all while cleaning up the install
  • Kit includes 6' of 1", 10' of 3/4", 30' of 1/2", 60' of 1/4", 15' of 1/8" Power Braid; 1' of 1/4" & 1/2" Heat Shrink; 100 of 4" Tie Wraps; 40 of 7" Tie Wraps; Electrical tape; Stretch & Seal tape

More Info

KBS Coatings 5750201 Satin Black/Gloss Black All-in-One Chassis Paint Kit, Preps and Coats Entire Car or Truck Frame

Search only KBS Coatings brand name
KBS Coatings 5750201 Satin Black/Gloss Black All-in-One Chassis Paint Kit, Preps and Coats Entire Car or Truck Frame

Current price: 89.95 USD


Check price and availability


Height: 8.3 Inches

Length: 10.6 Inches

Width: 8.4 Inches

Weight: 9.75 Pounds

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
  • Durable, all metal construction for longer life.
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement.
  • Moog engineered steel composition results in a stronger component
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Continuous temperature rating -94° to 257 °F; Melting point 482°F
  • Split loom makes it easy to apply to wiring that is already installed; Minimum 25% overlap keeps Power Braid secure over wires, hoses, and more
  • Flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables
  • Allows you to keep your wiring routed and secured away from moving parts, high heat and from abrasion, all while cleaning up the install
  • Kit includes 6' of 1", 10' of 3/4", 30' of 1/2", 60' of 1/4", 15' of 1/8" Power Braid; 1' of 1/4" & 1/2" Heat Shrink; 100 of 4" Tie Wraps; 40 of 7" Tie Wraps; Electrical tape; Stretch & Seal tape
  • Brush Roll or Spray Application
  • Will Not Crack, Flake or Peel
  • Excellent Adhesion
  • Provides a UV stable surface that is highly durable
  • Complete All-Inclusive Kit

More Info

Steelman Wireless ChassisEAR Auto Diagnostic Tool Kit, Identify The Cause of Troubling Vehicle Noises, 4 Transmitters with 50-Foot Range

Search only Steelman brand name
Steelman Wireless ChassisEAR Auto Diagnostic Tool Kit, Identify The Cause of Troubling Vehicle Noises, 4 Transmitters with 50-Foot Range

Current price: 211.28 USD


Check price and availability


Height: 13 Inches

Length: 17.5 Inches

Width: 6.75 Inches

Weight: 7.88 Pounds

Warranty: 90 Day Limited Warranty

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
  • Durable, all metal construction for longer life.
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement.
  • Moog engineered steel composition results in a stronger component
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Continuous temperature rating -94° to 257 °F; Melting point 482°F
  • Split loom makes it easy to apply to wiring that is already installed; Minimum 25% overlap keeps Power Braid secure over wires, hoses, and more
  • Flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables
  • Allows you to keep your wiring routed and secured away from moving parts, high heat and from abrasion, all while cleaning up the install
  • Kit includes 6' of 1", 10' of 3/4", 30' of 1/2", 60' of 1/4", 15' of 1/8" Power Braid; 1' of 1/4" & 1/2" Heat Shrink; 100 of 4" Tie Wraps; 40 of 7" Tie Wraps; Electrical tape; Stretch & Seal tape
  • Brush Roll or Spray Application
  • Will Not Crack, Flake or Peel
  • Excellent Adhesion
  • Provides a UV stable surface that is highly durable
  • Complete All-Inclusive Kit
  • ILLUMINATED CHANNEL BUTTONS - Illuminated buttons indicate the active channels and can be changed or muted with a quick push
  • SIGNAL STRENGTH INDICATOR - LED lights indicate signal strength of the active channel
  • BUILT-IN SPEAKER - Listen to noises with the built-in speaker or with headphones through the 3.5mm jack
  • 50-FOOT RANGE - Noises can be transmitted up to 50-feet from the transmitter to the receiver allowing use on small and large vehicles
  • NOISE DETECTION - Detect the source or squeaks, rattles, and other errant or troublesome noises throughout a car or truck's chassis

More Info

MOOG Chassis Products K100026 Cam Bolt Kit

Search only MOOG Steering & Suspension brand name
MOOG Chassis Products K100026 Cam Bolt Kit

Current price: 26.26 USD

Saving: $4.88 (16%)


Check price and availability


Height: 2.3 Inches

Length: 6.1 Inches

Width: 3.5 Inches

Weight: 1.45 Pounds

Warranty: Limited Warranty

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
  • Durable, all metal construction for longer life.
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement.
  • Moog engineered steel composition results in a stronger component
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Continuous temperature rating -94° to 257 °F; Melting point 482°F
  • Split loom makes it easy to apply to wiring that is already installed; Minimum 25% overlap keeps Power Braid secure over wires, hoses, and more
  • Flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables
  • Allows you to keep your wiring routed and secured away from moving parts, high heat and from abrasion, all while cleaning up the install
  • Kit includes 6' of 1", 10' of 3/4", 30' of 1/2", 60' of 1/4", 15' of 1/8" Power Braid; 1' of 1/4" & 1/2" Heat Shrink; 100 of 4" Tie Wraps; 40 of 7" Tie Wraps; Electrical tape; Stretch & Seal tape
  • Brush Roll or Spray Application
  • Will Not Crack, Flake or Peel
  • Excellent Adhesion
  • Provides a UV stable surface that is highly durable
  • Complete All-Inclusive Kit
  • ILLUMINATED CHANNEL BUTTONS - Illuminated buttons indicate the active channels and can be changed or muted with a quick push
  • SIGNAL STRENGTH INDICATOR - LED lights indicate signal strength of the active channel
  • BUILT-IN SPEAKER - Listen to noises with the built-in speaker or with headphones through the 3.5mm jack
  • 50-FOOT RANGE - Noises can be transmitted up to 50-feet from the transmitter to the receiver allowing use on small and large vehicles
  • NOISE DETECTION - Detect the source or squeaks, rattles, and other errant or troublesome noises throughout a car or truck's chassis
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • Incorporates proven design and engineering features
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Can solve excessive tire wear and steering issues
  • Can bring vehicles back to factory specification

More Info

KBS Coatings 5750202 Satin Black/Satin Black All-In-One Chassis Kit

Search only KBS Coatings brand name
KBS Coatings 5750202 Satin Black/Satin Black All-In-One Chassis Kit

Current price: 82.98 USD


Check price and availability


Height: 8.4 Inches

Length: 10.4 Inches

Width: 8.6 Inches

Weight: 10.1 Pounds

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
  • Durable, all metal construction for longer life.
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement.
  • Moog engineered steel composition results in a stronger component
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Continuous temperature rating -94° to 257 °F; Melting point 482°F
  • Split loom makes it easy to apply to wiring that is already installed; Minimum 25% overlap keeps Power Braid secure over wires, hoses, and more
  • Flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables
  • Allows you to keep your wiring routed and secured away from moving parts, high heat and from abrasion, all while cleaning up the install
  • Kit includes 6' of 1", 10' of 3/4", 30' of 1/2", 60' of 1/4", 15' of 1/8" Power Braid; 1' of 1/4" & 1/2" Heat Shrink; 100 of 4" Tie Wraps; 40 of 7" Tie Wraps; Electrical tape; Stretch & Seal tape
  • Brush Roll or Spray Application
  • Will Not Crack, Flake or Peel
  • Excellent Adhesion
  • Provides a UV stable surface that is highly durable
  • Complete All-Inclusive Kit
  • ILLUMINATED CHANNEL BUTTONS - Illuminated buttons indicate the active channels and can be changed or muted with a quick push
  • SIGNAL STRENGTH INDICATOR - LED lights indicate signal strength of the active channel
  • BUILT-IN SPEAKER - Listen to noises with the built-in speaker or with headphones through the 3.5mm jack
  • 50-FOOT RANGE - Noises can be transmitted up to 50-feet from the transmitter to the receiver allowing use on small and large vehicles
  • NOISE DETECTION - Detect the source or squeaks, rattles, and other errant or troublesome noises throughout a car or truck's chassis
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • Incorporates proven design and engineering features
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Can solve excessive tire wear and steering issues
  • Can bring vehicles back to factory specification
  • Package Dimensions: 26.416 L x 21.336 H x 21.843 W (centimeters)
  • Flash point: 4.0
  • Country of Origin: United States
  • Package Weight : 10.1 pounds

More Info

2007-2010 Hummer H3 10 Piece Chassis Kit Upper Arms Lower Ball Joints Tie Rod Sway Bar Links

Search only Mac Auto Parts brand name
2007-2010 Hummer H3 10 Piece Chassis Kit Upper Arms Lower Ball Joints Tie Rod Sway Bar Links

Current price: 279.95 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • BENEFITS: Increase rear ground clearance by flipping your u-bolts. Restore the necessary clamping force on your spring assembly by upgrading stock U-bolts to heavy duty 5/8" U-bolts. Designed to withstand even the most extreme environments.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours.
  • TECHNICAL NOTES: U-Bolts Length - 8.5” Width - 3.5” Thread Length - 5” Thread Pitch - 5/8”
  • CONTENTS: (2x) U-Bolt Flip Striker Plates, (4x) Round Bend U-bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999-2006 Toyota Tundra (2WD 4WD)
  • Metal surfaces are phosphate coated for corrosion protection
  • Metal rib design helps lock the inner tube within frame pocket
  • Assembled with proper precompression for ultimate in performance and feel
  • High level bonding adhesive is used for durability
  • Elastomer compounds do not utilize any reground rubber fillers
  • Manufactured from high quality elastomer compounds for durability and ride performance
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
  • Durable, all metal construction for longer life.
  • Full ball metal stud provides 36 degrees of smooth, consistent, rotational movement.
  • Moog engineered steel composition results in a stronger component
  • Problem Solver powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
  • Continuous temperature rating -94° to 257 °F; Melting point 482°F
  • Split loom makes it easy to apply to wiring that is already installed; Minimum 25% overlap keeps Power Braid secure over wires, hoses, and more
  • Flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables
  • Allows you to keep your wiring routed and secured away from moving parts, high heat and from abrasion, all while cleaning up the install
  • Kit includes 6' of 1", 10' of 3/4", 30' of 1/2", 60' of 1/4", 15' of 1/8" Power Braid; 1' of 1/4" & 1/2" Heat Shrink; 100 of 4" Tie Wraps; 40 of 7" Tie Wraps; Electrical tape; Stretch & Seal tape
  • Brush Roll or Spray Application
  • Will Not Crack, Flake or Peel
  • Excellent Adhesion
  • Provides a UV stable surface that is highly durable
  • Complete All-Inclusive Kit
  • ILLUMINATED CHANNEL BUTTONS - Illuminated buttons indicate the active channels and can be changed or muted with a quick push
  • SIGNAL STRENGTH INDICATOR - LED lights indicate signal strength of the active channel
  • BUILT-IN SPEAKER - Listen to noises with the built-in speaker or with headphones through the 3.5mm jack
  • 50-FOOT RANGE - Noises can be transmitted up to 50-feet from the transmitter to the receiver allowing use on small and large vehicles
  • NOISE DETECTION - Detect the source or squeaks, rattles, and other errant or troublesome noises throughout a car or truck's chassis
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • Incorporates proven design and engineering features
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Can solve excessive tire wear and steering issues
  • Can bring vehicles back to factory specification
  • Package Dimensions: 26.416 L x 21.336 H x 21.843 W (centimeters)
  • Flash point: 4.0
  • Country of Origin: United States
  • Package Weight : 10.1 pounds
  • Manufactured by ISO certified factories to meet requirements of fit, form and function
  • Anti-corrosion coating on the control arm for extended life
  • OE fit and form geometry and alignment
  • Direct replacement for a trouble-free installation

More Info

1    2    3    4    5    6    7    8    9    10