Wonderful Circuit Testers. Reviews July, 2020, page 7

Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit with SmartTone Technology

Search only Fluke Networks brand name
Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit with SmartTone Technology

Current price: 68.56 USD

Saving: $31.39 (31%)


Check price and availability


Height: 3 Inches

Length: 12.25 Inches

Width: 7 Inches

Weight: 1.10231131 Pounds

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline

More Info

Tone and Probe Kit, Wire Tracer&Circuit Tester Professional Tone Tracing Kit, Cable Tester Tone Generator Inductive Amplifier with Adjustable Volume

Search only Junluck brand name
Tone and Probe Kit, Wire Tracer&Circuit Tester Professional Tone Tracing Kit, Cable Tester Tone Generator Inductive Amplifier with Adjustable Volume

Current price: 48.59 USD


Check price and availability


Height: 0.393700787 Inches

Length: 0.393700787 Inches

Width: 0.393700787 Inches

Weight: 0.661386786 Pounds

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).

More Info

Klein Tools 69149 Multimeter Test Kit, Klein Multimeter, Noncontact Voltage Tester and Outlet Tester, Leads and Batteries Included

Search only Klein Tools brand name
Klein Tools 69149 Multimeter Test Kit, Klein Multimeter, Noncontact Voltage Tester and Outlet Tester, Leads and Batteries Included

Current price: 36.95 USD

Saving: $17.01 (32%)


Check price and availability


Height: 3 Inches

Length: 10.25 Inches

Width: 6.88 Inches

Weight: 0.94 Pounds

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation

More Info

Sperry Instruments VC61000 Volt Check Voltage & Continuity Tester, Black & Yellow

Search only Sperry Instruments brand name
Sperry Instruments VC61000 Volt Check Voltage & Continuity Tester, Black & Yellow

Current price: 42.38 USD


Check price and availability


Height: 9 Inches

Length: 2.25 Inches

Width: 0.5 Inches

Weight: 0.22 Pounds

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
  • 26-inch Sta-Flex cold-weather leads with strain reliefs
  • Snap-in leads are spaced to fit a standard outlet for one-handed operation
  • Twin probes for 24-600V AC; 6-220V DC with polarity indication and continuity
  • Circuit Alert non-contact AC voltage detection in tip (50-600V AC)
  • Indicates AC/DC voltage, continuity and DC polarity

More Info

Ethernet Tester,Wire Tester,Wire Tracker,Ethernet Network Cable Tester Kit RJ11 RJ45 CAT5/5e CAT6 LAN Wire Tracker Portable Line Finder for Miss Wiring Disorder Cable Open and Short Circuit Testing

Search only Aksbox brand name
Ethernet Tester,Wire Tester,Wire Tracker,Ethernet Network Cable Tester Kit RJ11 RJ45 CAT5/5e CAT6 LAN Wire Tracker Portable Line Finder for Miss Wiring Disorder Cable Open and Short Circuit Testing

Current price: 21.99 USD


Check price and availability


  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
  • 26-inch Sta-Flex cold-weather leads with strain reliefs
  • Snap-in leads are spaced to fit a standard outlet for one-handed operation
  • Twin probes for 24-600V AC; 6-220V DC with polarity indication and continuity
  • Circuit Alert non-contact AC voltage detection in tip (50-600V AC)
  • Indicates AC/DC voltage, continuity and DC polarity
  • Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
  • Low-Voltage Reminding & Energy Saving. Select "SCAN", the "STATUS" indicator and the "VERIFY" indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.
  • Convenient to Use. Wire Tracking: Connect the wire to the emitter through alligator clips. Select "SCAN". Emitter works properly if the indicator "STATUS" is on. Use the receiver to find target wires. No need of multi-testers. Network Cables Verifying: Plug one side of the cable into the emitter and the other side into the receiver. Select "TEST", the emitter works properly if the indicating light "VERIFY" is on. Determine circuit problems from numerous cables. No need of network tester.
  • Multifunctional & Easy to Operate. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. There are only 2 buttons on the emmiter,FUNCTION SLECETING & FUNCTION SWTICHING, and 1 INCHING button on the receiver. The indicating words such as "SCAN" and "TEST" are clear and easy to identify.
  • Please Note. Before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10mA and 30mA respectively, and the maximum voltage is 24 V ), otherwise the item will get damaged. Besides, you may need two 9V laminated cell, which are NOT included in the packaging of this item.

More Info

Fluke FLK2AC/90-1000V Pocket-Sized Voltage Detector, 90 to 1000 V AC

Search only Fluke brand name
Fluke FLK2AC/90-1000V Pocket-Sized Voltage Detector, 90 to 1000 V AC

Current price: 33.94 USD

Saving: $4.91 (13%)


Check price and availability


Weight: 0.55 Pounds

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
  • 26-inch Sta-Flex cold-weather leads with strain reliefs
  • Snap-in leads are spaced to fit a standard outlet for one-handed operation
  • Twin probes for 24-600V AC; 6-220V DC with polarity indication and continuity
  • Circuit Alert non-contact AC voltage detection in tip (50-600V AC)
  • Indicates AC/DC voltage, continuity and DC polarity
  • Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
  • Low-Voltage Reminding & Energy Saving. Select "SCAN", the "STATUS" indicator and the "VERIFY" indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.
  • Convenient to Use. Wire Tracking: Connect the wire to the emitter through alligator clips. Select "SCAN". Emitter works properly if the indicator "STATUS" is on. Use the receiver to find target wires. No need of multi-testers. Network Cables Verifying: Plug one side of the cable into the emitter and the other side into the receiver. Select "TEST", the emitter works properly if the indicating light "VERIFY" is on. Determine circuit problems from numerous cables. No need of network tester.
  • Multifunctional & Easy to Operate. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. There are only 2 buttons on the emmiter,FUNCTION SLECETING & FUNCTION SWTICHING, and 1 INCHING button on the receiver. The indicating words such as "SCAN" and "TEST" are clear and easy to identify.
  • Please Note. Before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10mA and 30mA respectively, and the maximum voltage is 24 V ), otherwise the item will get damaged. Besides, you may need two 9V laminated cell, which are NOT included in the packaging of this item.
  • Brand: Fluke
  • Qty/ea: 1
  • Dimensions: 5.75 in L x 0.75 in DIA
  • Max Voltage: 90 to 1000 VAC
  • Product Type: Voltage detectors

More Info

Klein Tools ET60 Voltage Meter, AC Voltage and DC Voltage Tester, Digital Multimeter Does Not Require Batteries

Search only Klein Tools brand name
Klein Tools ET60 Voltage Meter, AC Voltage and DC Voltage Tester, Digital Multimeter Does Not Require Batteries

Current price: 21.77 USD


Check price and availability


Height: 1.44 Inches

Length: 5.67 Inches

Width: 2.35 Inches

Weight: 0.2 Pounds

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
  • 26-inch Sta-Flex cold-weather leads with strain reliefs
  • Snap-in leads are spaced to fit a standard outlet for one-handed operation
  • Twin probes for 24-600V AC; 6-220V DC with polarity indication and continuity
  • Circuit Alert non-contact AC voltage detection in tip (50-600V AC)
  • Indicates AC/DC voltage, continuity and DC polarity
  • Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
  • Low-Voltage Reminding & Energy Saving. Select "SCAN", the "STATUS" indicator and the "VERIFY" indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.
  • Convenient to Use. Wire Tracking: Connect the wire to the emitter through alligator clips. Select "SCAN". Emitter works properly if the indicator "STATUS" is on. Use the receiver to find target wires. No need of multi-testers. Network Cables Verifying: Plug one side of the cable into the emitter and the other side into the receiver. Select "TEST", the emitter works properly if the indicating light "VERIFY" is on. Determine circuit problems from numerous cables. No need of network tester.
  • Multifunctional & Easy to Operate. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. There are only 2 buttons on the emmiter,FUNCTION SLECETING & FUNCTION SWTICHING, and 1 INCHING button on the receiver. The indicating words such as "SCAN" and "TEST" are clear and easy to identify.
  • Please Note. Before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10mA and 30mA respectively, and the maximum voltage is 24 V ), otherwise the item will get damaged. Besides, you may need two 9V laminated cell, which are NOT included in the packaging of this item.
  • Brand: Fluke
  • Qty/ea: 1
  • Dimensions: 5.75 in L x 0.75 in DIA
  • Max Voltage: 90 to 1000 VAC
  • Product Type: Voltage detectors
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested
  • CAT IV 600V modern solid-state design for safety
  • Uses standard replaceable multimeter test leads for versatility
  • Tests AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages

More Info

OEM TOOLS 27355 Amp Hound Tester

Search only OEM TOOLS brand name
OEM TOOLS 27355 Amp Hound Tester

Current price: 51.73 USD


Check price and availability


Height: 2 Inches

Length: 8.9 Inches

Width: 7.5 Inches

Warranty: OEM Limited One Year

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
  • 26-inch Sta-Flex cold-weather leads with strain reliefs
  • Snap-in leads are spaced to fit a standard outlet for one-handed operation
  • Twin probes for 24-600V AC; 6-220V DC with polarity indication and continuity
  • Circuit Alert non-contact AC voltage detection in tip (50-600V AC)
  • Indicates AC/DC voltage, continuity and DC polarity
  • Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
  • Low-Voltage Reminding & Energy Saving. Select "SCAN", the "STATUS" indicator and the "VERIFY" indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.
  • Convenient to Use. Wire Tracking: Connect the wire to the emitter through alligator clips. Select "SCAN". Emitter works properly if the indicator "STATUS" is on. Use the receiver to find target wires. No need of multi-testers. Network Cables Verifying: Plug one side of the cable into the emitter and the other side into the receiver. Select "TEST", the emitter works properly if the indicating light "VERIFY" is on. Determine circuit problems from numerous cables. No need of network tester.
  • Multifunctional & Easy to Operate. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. There are only 2 buttons on the emmiter,FUNCTION SLECETING & FUNCTION SWTICHING, and 1 INCHING button on the receiver. The indicating words such as "SCAN" and "TEST" are clear and easy to identify.
  • Please Note. Before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10mA and 30mA respectively, and the maximum voltage is 24 V ), otherwise the item will get damaged. Besides, you may need two 9V laminated cell, which are NOT included in the packaging of this item.
  • Brand: Fluke
  • Qty/ea: 1
  • Dimensions: 5.75 in L x 0.75 in DIA
  • Max Voltage: 90 to 1000 VAC
  • Product Type: Voltage detectors
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested
  • CAT IV 600V modern solid-state design for safety
  • Uses standard replaceable multimeter test leads for versatility
  • Tests AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages
  • Exceed ANSI standards
  • Great value
  • Precision manufactured

More Info

Noyafa NF-388-B Multipurpose Network Cable Tester Tracker Tracer Test Ethernet

Search only NOYAFA brand name
Noyafa NF-388-B Multipurpose Network Cable Tester Tracker Tracer Test Ethernet

Current price: 49.84 USD

Saving: $5.54 (10%)


Check price and availability


  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
  • 26-inch Sta-Flex cold-weather leads with strain reliefs
  • Snap-in leads are spaced to fit a standard outlet for one-handed operation
  • Twin probes for 24-600V AC; 6-220V DC with polarity indication and continuity
  • Circuit Alert non-contact AC voltage detection in tip (50-600V AC)
  • Indicates AC/DC voltage, continuity and DC polarity
  • Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
  • Low-Voltage Reminding & Energy Saving. Select "SCAN", the "STATUS" indicator and the "VERIFY" indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.
  • Convenient to Use. Wire Tracking: Connect the wire to the emitter through alligator clips. Select "SCAN". Emitter works properly if the indicator "STATUS" is on. Use the receiver to find target wires. No need of multi-testers. Network Cables Verifying: Plug one side of the cable into the emitter and the other side into the receiver. Select "TEST", the emitter works properly if the indicating light "VERIFY" is on. Determine circuit problems from numerous cables. No need of network tester.
  • Multifunctional & Easy to Operate. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. There are only 2 buttons on the emmiter,FUNCTION SLECETING & FUNCTION SWTICHING, and 1 INCHING button on the receiver. The indicating words such as "SCAN" and "TEST" are clear and easy to identify.
  • Please Note. Before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10mA and 30mA respectively, and the maximum voltage is 24 V ), otherwise the item will get damaged. Besides, you may need two 9V laminated cell, which are NOT included in the packaging of this item.
  • Brand: Fluke
  • Qty/ea: 1
  • Dimensions: 5.75 in L x 0.75 in DIA
  • Max Voltage: 90 to 1000 VAC
  • Product Type: Voltage detectors
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested
  • CAT IV 600V modern solid-state design for safety
  • Uses standard replaceable multimeter test leads for versatility
  • Tests AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages
  • Exceed ANSI standards
  • Great value
  • Precision manufactured
  • Memory for calibration data storage.
  • 8 remote identifiers help to test 8 cables at one time.
  • Testing polarity and voltage
  • Measure cable length and determine the distance of broken point
  • Check wiring error in 5E, 6E, coaxial cable, such as open, short, cross, ect
  • Hub blink for locating network port by the flashing port light on hub/ switch
  • Directly hunt 5E, 6E, telephone wire, coaxial cable, usb cable and other cables

More Info

Milwaukee 2202-20 Voltage Detector with LED Light

Search only Milwaukee brand name
Milwaukee 2202-20 Voltage Detector with LED Light

Current price: 21.73 USD

Saving: $2.26 (9%)


Check price and availability


Height: 1 Inches

Length: 2 Inches

Width: 8 Inches

Weight: 0.19 Pounds

  • Push button switch selects Solid, Alt and Off
  • Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
  • Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
  • Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
  • Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
  • ☛AVOID SHORT CIRCUIT - Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use.
  • ☛HIGH ACCURACY - With optional continuous or adjustable generator, the method is simple and the test results are accurate.
  • ☛CLAMP MODE - For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement.
  • ☛MEASURING RANGE - Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator
  • ☛ABOUT DETAILS - The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED).
  • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
  • The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
  • 26-inch Sta-Flex cold-weather leads with strain reliefs
  • Snap-in leads are spaced to fit a standard outlet for one-handed operation
  • Twin probes for 24-600V AC; 6-220V DC with polarity indication and continuity
  • Circuit Alert non-contact AC voltage detection in tip (50-600V AC)
  • Indicates AC/DC voltage, continuity and DC polarity
  • Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
  • Low-Voltage Reminding & Energy Saving. Select "SCAN", the "STATUS" indicator and the "VERIFY" indicator will flash at the same time when the cell voltage is below 6V. It will automatically switch off while not using, which can prolong the service life of the cell to more than 50 hours.
  • Convenient to Use. Wire Tracking: Connect the wire to the emitter through alligator clips. Select "SCAN". Emitter works properly if the indicator "STATUS" is on. Use the receiver to find target wires. No need of multi-testers. Network Cables Verifying: Plug one side of the cable into the emitter and the other side into the receiver. Select "TEST", the emitter works properly if the indicating light "VERIFY" is on. Determine circuit problems from numerous cables. No need of network tester.
  • Multifunctional & Easy to Operate. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. There are only 2 buttons on the emmiter,FUNCTION SLECETING & FUNCTION SWTICHING, and 1 INCHING button on the receiver. The indicating words such as "SCAN" and "TEST" are clear and easy to identify.
  • Please Note. Before you use the product to test or track cables, please make sure that the wires are in low-electricity or power-off condition(maximum currents for emitter and receiver are 10mA and 30mA respectively, and the maximum voltage is 24 V ), otherwise the item will get damaged. Besides, you may need two 9V laminated cell, which are NOT included in the packaging of this item.
  • Brand: Fluke
  • Qty/ea: 1
  • Dimensions: 5.75 in L x 0.75 in DIA
  • Max Voltage: 90 to 1000 VAC
  • Product Type: Voltage detectors
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested
  • CAT IV 600V modern solid-state design for safety
  • Uses standard replaceable multimeter test leads for versatility
  • Tests AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages
  • Exceed ANSI standards
  • Great value
  • Precision manufactured
  • Memory for calibration data storage.
  • 8 remote identifiers help to test 8 cables at one time.
  • Testing polarity and voltage
  • Measure cable length and determine the distance of broken point
  • Check wiring error in 5E, 6E, coaxial cable, such as open, short, cross, ect
  • Hub blink for locating network port by the flashing port light on hub/ switch
  • Directly hunt 5E, 6E, telephone wire, coaxial cable, usb cable and other cables
  • The product is highly durable
  • The product is easy to use and easy to handle
  • Voltage Detector W/Led Light

More Info

1    2    3    4    5    6    7    8    9    10