Best Clamp Meters. Reviews September, 2020

Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect

Search only Meterk brand name
Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect

Current price: 39.97 USD

Saving: $19.00 (32%)


Check price and availability


Height: 1.3779527545 Inches

Length: 8.8582677075 Inches

Width: 4.1338582635 Inches

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.

More Info

Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600

Search only Etekcity brand name
Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600

Current price: 27.98 USD


Check price and availability


Height: 1.1811 Inches

Length: 8.18896 Inches

Width: 2.99212 Inches

Warranty: 2-YEAR WARRANTY: 1-year buyer assurance (with a free option to extend it by 1 more year), and lifetime support from Etekcity

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests

More Info

Klein Tools CL110KIT Electrical Tester / Maintenance Kit w/Clamp Meter, Continuity Tester, GFCI Tester, Line Splitter, Case, Leads, 3 x AAA

Search only Klein Tools brand name
Klein Tools CL110KIT Electrical Tester / Maintenance Kit w/Clamp Meter, Continuity Tester, GFCI Tester, Line Splitter, Case, Leads, 3 x AAA

Current price: 64.97 USD


Check price and availability


Height: 2.1 Inches

Length: 11.8 Inches

Width: 5.4 Inches

Weight: 0.220462262 Pounds

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads

More Info

KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC CURRENT)

Search only KAIWEETS brand name
KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC CURRENT)

Current price: 45.99 USD

Saving: $22.99 (33%)


Check price and availability


Height: 1.3 Inches

Length: 7.5 Inches

Width: 2.8 Inches

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product warranty provided. 7/24 Customer Service.
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.

More Info

Fluke 323 True-RMS Clamp Meter

Search only Fluke brand name
Fluke 323 True-RMS Clamp Meter

Current price: 115 USD

Saving: $34.99 (23%)


Check price and availability


Height: 8.1496062909 Inches

Length: 1.3385826758 Inches

Width: 2.9527559025 Inches

Weight: 0.44 Pounds

Warranty: 2 years

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product warranty provided. 7/24 Customer Service.
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current

More Info

Fluke 324 True RMS Clamp Meter

Search only Fluke brand name
Fluke 324 True RMS Clamp Meter

Current price: 182.43 USD

Saving: $37.56 (17%)


Check price and availability


Height: 2.7165354303 Inches

Length: 9.4881889667 Inches

Width: 4.2125984209 Inches

Weight: 0.881849048 Pounds

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product warranty provided. 7/24 Customer Service.
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current
  • Temperature and capacitance measurement
  • Hold button
  • CAT IV 300V/CAT III 600 Volt safety rating
  • Large, easy to read backlight display
  • Slim, ergonomic design
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms

More Info

Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV

Search only Extech brand name
Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV

Current price: 80.09 USD


Check price and availability


Height: 9 Inches

Length: 3 Inches

Width: 1.6 Inches

Weight: 0.58 Pounds

Warranty: CN

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product warranty provided. 7/24 Customer Service.
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current
  • Temperature and capacitance measurement
  • Hold button
  • CAT IV 300V/CAT III 600 Volt safety rating
  • Large, easy to read backlight display
  • Slim, ergonomic design
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
  • Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off and low battery indicator
  • Functions include: NCV, AC/DC voltage, AC/DC current, resistance, Capacitance, Frequency, type-k temperature, Diode test, continuity
  • Large backlit LCD display and built-in Flashlight
  • 1.2" (30mm) jaw size fits conductors up to 500MCM
  • True RMS feature for accurate readings regardless of waveforms

More Info

Klein Tools CL800 Digital Clamp Meter, Auto-Ranging True RMS, Low Impedance (LoZ) Mode, 600 Amp, Measures Volts, Temp, More, with Auto-Off

Search only Klein Tools brand name
Klein Tools CL800 Digital Clamp Meter, Auto-Ranging True RMS, Low Impedance (LoZ) Mode, 600 Amp, Measures Volts, Temp, More, with Auto-Off

Current price: 129.97 USD

Saving: $49.97 (28%)


Check price and availability


Height: 1.54 Inches

Length: 9.09 Inches

Width: 3.82 Inches

Weight: 0.78 Pounds

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product warranty provided. 7/24 Customer Service.
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current
  • Temperature and capacitance measurement
  • Hold button
  • CAT IV 300V/CAT III 600 Volt safety rating
  • Large, easy to read backlight display
  • Slim, ergonomic design
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
  • Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off and low battery indicator
  • Functions include: NCV, AC/DC voltage, AC/DC current, resistance, Capacitance, Frequency, type-k temperature, Diode test, continuity
  • Large backlit LCD display and built-in Flashlight
  • 1.2" (30mm) jaw size fits conductors up to 500MCM
  • True RMS feature for accurate readings regardless of waveforms
  • CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
  • Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
  • Thermocouple probe measures temperature
  • Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
  • Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy

More Info

Clamp Meter Amp meter Digital Multimeter 6000 Counts with NCV Auto-Ranging Testing AC/DC Current&Voltage, Continuity Electrical Tester, Diode, Resistance, Capacitance, Frequency- Tacklife

Search only TACKLIFE brand name
Clamp Meter Amp meter Digital Multimeter 6000 Counts with NCV Auto-Ranging Testing AC/DC Current&Voltage, Continuity Electrical Tester, Diode, Resistance, Capacitance, Frequency- Tacklife

Current price: 39.96 USD


Check price and availability


Height: 1.2 Inches

Length: 8.7 Inches

Width: 3 Inches

Weight: 0.86 Pounds

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product warranty provided. 7/24 Customer Service.
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current
  • Temperature and capacitance measurement
  • Hold button
  • CAT IV 300V/CAT III 600 Volt safety rating
  • Large, easy to read backlight display
  • Slim, ergonomic design
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
  • Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off and low battery indicator
  • Functions include: NCV, AC/DC voltage, AC/DC current, resistance, Capacitance, Frequency, type-k temperature, Diode test, continuity
  • Large backlit LCD display and built-in Flashlight
  • 1.2" (30mm) jaw size fits conductors up to 500MCM
  • True RMS feature for accurate readings regardless of waveforms
  • CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
  • Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
  • Thermocouple probe measures temperature
  • Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
  • Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
  • ▲ What You Get: 1x Tacklife CM06 Digital Clamp Meter, 2x Test Leads, 2x AAA Batteries, 1x User Manual, 24 month service; Be assured of purchase Tacklife CM06 digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problem
  • ▲Solid With Free Extra Test Leads : Supplied with free batteries and test leads, all in a carrying pouch for direct use; The test leads are easy to grip; The design is Ergonomic and portable for easy use, perfect for both professional or new users
  • ▲Multifunctional & Easy to read - High-Definition Large Back-lit LCD provides better visibility in dark working area; ZERO function makes for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Data hold function; Low battery indicator
  • ▲Non-Contact Voltage Detection & Overload Protection - If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Overload Protection & Double Insulation Protection avoid electric shock, protect users from touching dangerous areas
  • ▲Quick and Accurate AC/DC Amp Clamp Meter- Auto-ranging clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance, capacitance, continuity, Temperature, diode and Frequency(Hz) ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely

More Info

Bluetooth AC DC Clamp Mutlimeter Amp Meter with Temp Testing, Auto-ranging Measures Current, Voltage, Resistance, Capacitance, Continuity, Amperage, Volt, Ohm Clamp-on Ampmeter (BTMETER BT-570CAPP)

Search only BTMETER brand name
Bluetooth AC DC Clamp Mutlimeter Amp Meter with Temp Testing, Auto-ranging Measures Current, Voltage, Resistance, Capacitance, Continuity, Amperage, Volt, Ohm Clamp-on Ampmeter (BTMETER BT-570CAPP)

Current price: 41.99 USD

Saving: $2.00 (5%)


Check price and availability


Height: 1.57 Inches

Length: 8.86 Inches

Width: 3.82 Inches

Weight: 0.45 Kilograms

  • ▲【YOU WILL GET】: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
  • ▲【EASY TO USE AND READ】: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
  • ▲【CONTINUITY TEST & OVERLOAD PROTECTION】: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
  • ▲【WITH NCV & LIVE LINE TEST FUNCTION】: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
  • ▲【MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE】: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • AC Auto-Ranging 400 amp digital clamp meter
  • CAT III 600V, Class 2, Double insulation safety rating
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
  • GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
  • Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product warranty provided. 7/24 Customer Service.
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilohms. Does not measure dc current
  • Temperature and capacitance measurement
  • Hold button
  • CAT IV 300V/CAT III 600 Volt safety rating
  • Large, easy to read backlight display
  • Slim, ergonomic design
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
  • True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
  • Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
  • Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off and low battery indicator
  • Functions include: NCV, AC/DC voltage, AC/DC current, resistance, Capacitance, Frequency, type-k temperature, Diode test, continuity
  • Large backlit LCD display and built-in Flashlight
  • 1.2" (30mm) jaw size fits conductors up to 500MCM
  • True RMS feature for accurate readings regardless of waveforms
  • CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
  • Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
  • Thermocouple probe measures temperature
  • Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
  • Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
  • ▲ What You Get: 1x Tacklife CM06 Digital Clamp Meter, 2x Test Leads, 2x AAA Batteries, 1x User Manual, 24 month service; Be assured of purchase Tacklife CM06 digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problem
  • ▲Solid With Free Extra Test Leads : Supplied with free batteries and test leads, all in a carrying pouch for direct use; The test leads are easy to grip; The design is Ergonomic and portable for easy use, perfect for both professional or new users
  • ▲Multifunctional & Easy to read - High-Definition Large Back-lit LCD provides better visibility in dark working area; ZERO function makes for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Data hold function; Low battery indicator
  • ▲Non-Contact Voltage Detection & Overload Protection - If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Overload Protection & Double Insulation Protection avoid electric shock, protect users from touching dangerous areas
  • ▲Quick and Accurate AC/DC Amp Clamp Meter- Auto-ranging clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance, capacitance, continuity, Temperature, diode and Frequency(Hz) ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely
  • ⚡【Clamp On Live Wire for AC DC Amp Test】To measure amp with ANY clamp meter, you MUST separate the hot and neutral conductors or they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter
  • ⚡【Accurate Voltage Amperage Meter】0.1A resolution for 0.1~400A AC DC amp, 1A for 400A~1000A to support accurate amp reading for low and high current. Ideal non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis
  • ⚡【AC/DC Inductive Clamp Amp Meter】Neat Bright Backlit LCD display, Big Jaw Caliber Size 1.77 inches. Make sure press “REL” to zero out the meter before clamping, or the meter will show bias numbers without any wire in the clamps due to the magnetic field.
  • ⚡【Bluetooth APP Clamp Ammeter】 Auto pair with Android / IOS phone,support for real-time measurement reading in Max/Min/Average, with timing and curve graph. And save the measurements in TXT/Excel files for data logging
  • ⚡【AC & DC Digital Clamp Multitester】 4000 Counts Auto-range AC/DC amps clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance,capacitance, audible beep continuity, Temperature, diode and Frequency(Hz),Duty Cycle, Data Hold.

More Info

1    2    3    4    5    6    7    8    9    10