Best Computer Heatsinks. Reviews August, 2020

LoveRPi Raspberry Pi 4 4GB Computer with Heatsinks

Search only LoveRPi brand name
LoveRPi Raspberry Pi 4 4GB Computer with Heatsinks

Current price: 59.99 USD


Check price and availability


  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.

More Info

200x200x0.5mm Thermal Pad, 6W/m.k Thermal Conductivity/Non Conductive/Insulation/Heat Resistance/High Temperature Resistance/Heat Sink Silicone Sheet Pads for Laptop Heatsink/GPU/CPU/LED Cooler

Search only AI AIKENUO brand name
200x200x0.5mm Thermal Pad, 6W/m.k Thermal Conductivity/Non Conductive/Insulation/Heat Resistance/High Temperature Resistance/Heat Sink Silicone Sheet Pads for Laptop Heatsink/GPU/CPU/LED Cooler

Current price: 13.99 USD


Check price and availability


  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.

More Info

Thermal Adhesive Tape, 25Mx20mmx0.15mm High Performance Thermally Double Side Tapes Cooling Pad Apply to LED Strips, 3D Printer,BCP,CPU,GPU,Laptop Heatsink,and Have Heat Conduction, Insulation,

Search only AI AIKENUO brand name
Thermal Adhesive Tape, 25Mx20mmx0.15mm High Performance Thermally Double Side Tapes Cooling Pad Apply to LED Strips, 3D Printer,BCP,CPU,GPU,Laptop Heatsink,and Have Heat Conduction, Insulation,

Current price: 10.99 USD


Check price and availability


  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.

More Info

M.2 Heatsink Copper, m2 pcie NVMe Laptop Heatsink Copper,with Silicone Thermal Pad, for M.2 2280 SSD Laptop

Search only SGTKJSJS brand name
M.2 Heatsink Copper, m2 pcie NVMe Laptop Heatsink Copper,with Silicone Thermal Pad, for M.2 2280 SSD Laptop

Current price: 7.59 USD

Saving: $3.40 (31%)


Check price and availability


Weight: 0.02 Pounds

  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • 【 Unique Silicone Thermal Pad】 Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
  • 【Easy to install】 Only 1.5mm-2.5mm installation height, Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Wide compatibility】Compatible with most laptops and desktop computers, supports PCIe NVMe M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • 【100% copper】High performance Thermal Heatsink;
  • 【The copper heat sink is】 1mm thin,used for compact Laptop space.

More Info

DIYhz Aluminum Water Cooling Block, Liquid Water Cooler Heat Sink System for PC Computer CPU Graphics Radiator Heatsink Endothermic Head Silver 2pcs(40mm x 40mm x 12mm)

Search only DIYhz brand name
DIYhz Aluminum Water Cooling Block, Liquid Water Cooler Heat Sink System for PC Computer CPU Graphics Radiator Heatsink Endothermic Head Silver 2pcs(40mm x 40mm x 12mm)

Current price: 12.99 USD


Check price and availability


Weight: 0.2 Pounds

  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • 【 Unique Silicone Thermal Pad】 Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
  • 【Easy to install】 Only 1.5mm-2.5mm installation height, Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Wide compatibility】Compatible with most laptops and desktop computers, supports PCIe NVMe M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • 【100% copper】High performance Thermal Heatsink;
  • 【The copper heat sink is】 1mm thin,used for compact Laptop space.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 40 x 12mm; Material: aluminum alloy.

More Info

HPFIX Thermal Adhesive Tape 10mm by 25M, High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability

Search only HPFIX brand name
HPFIX Thermal Adhesive Tape 10mm by 25M, High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability

Current price: 8.99 USD

Saving: $2.00 (18%)


Check price and availability


Height: 0.4 Inches

Length: 4.8 Inches

Width: 4.8 Inches

  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • 【 Unique Silicone Thermal Pad】 Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
  • 【Easy to install】 Only 1.5mm-2.5mm installation height, Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Wide compatibility】Compatible with most laptops and desktop computers, supports PCIe NVMe M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • 【100% copper】High performance Thermal Heatsink;
  • 【The copper heat sink is】 1mm thin,used for compact Laptop space.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 40 x 12mm; Material: aluminum alloy.
  • 🥇 Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).
  • 🥇 Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • 🥇 HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
  • 🥇 Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
  • 🥇 HPFIX double adhesive thermal tape is a simple and practical heat conductive tape, very easy to use, even for beginners.

More Info

Laptop NVMe M.2 Heatsink with Nano Thermal Pads,Heat Sink Copper for 2280 M2 SSD Laptop (2pcs)

Search only SGTKJSJS brand name
Laptop NVMe M.2 Heatsink with Nano Thermal Pads,Heat Sink Copper for 2280 M2 SSD Laptop (2pcs)

Current price: 9.99 USD

Saving: $7.00 (41%)


Check price and availability


Height: 0.04 Inches

Length: 3 Inches

Width: 0.87 Inches

  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • 【 Unique Silicone Thermal Pad】 Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
  • 【Easy to install】 Only 1.5mm-2.5mm installation height, Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Wide compatibility】Compatible with most laptops and desktop computers, supports PCIe NVMe M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • 【100% copper】High performance Thermal Heatsink;
  • 【The copper heat sink is】 1mm thin,used for compact Laptop space.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 40 x 12mm; Material: aluminum alloy.
  • 🥇 Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).
  • 🥇 Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • 🥇 HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
  • 🥇 Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
  • 🥇 HPFIX double adhesive thermal tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
  • 【Easy for Installation】- Two mounting methods: rubber ring and high temperature insulation sticker for compact space in laptops.
  • 【thermal pad】- Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Materials and Workmanship】- 100% copper, cut and polished,High performance Thermal Heatsink;
  • 【10-20°C Cooling Effect】- Designed for the compact space of laptops,minimum installation height required: 1.5mm., with 10-20°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling.
  • 【Universally Fit】- This NVMe M.2 heatsink compatible with M.2 2280 SSD . It’s universally fit for laptops and desktop computers, Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.

More Info

DIYhz Aluminum Water Cooling Block, Liquid Water Cooler Heat Sink System for PC Computer CPU Graphics Radiator Heatsink Endothermic Head Silver 2pcs(40mm x 200mm x 12mm)

Search only DIYhz brand name
DIYhz Aluminum Water Cooling Block, Liquid Water Cooler Heat Sink System for PC Computer CPU Graphics Radiator Heatsink Endothermic Head Silver 2pcs(40mm x 200mm x 12mm)

Current price: 24.99 USD


Check price and availability


  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • 【 Unique Silicone Thermal Pad】 Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
  • 【Easy to install】 Only 1.5mm-2.5mm installation height, Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Wide compatibility】Compatible with most laptops and desktop computers, supports PCIe NVMe M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • 【100% copper】High performance Thermal Heatsink;
  • 【The copper heat sink is】 1mm thin,used for compact Laptop space.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 40 x 12mm; Material: aluminum alloy.
  • 🥇 Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).
  • 🥇 Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • 🥇 HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
  • 🥇 Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
  • 🥇 HPFIX double adhesive thermal tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
  • 【Easy for Installation】- Two mounting methods: rubber ring and high temperature insulation sticker for compact space in laptops.
  • 【thermal pad】- Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Materials and Workmanship】- 100% copper, cut and polished,High performance Thermal Heatsink;
  • 【10-20°C Cooling Effect】- Designed for the compact space of laptops,minimum installation height required: 1.5mm., with 10-20°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling.
  • 【Universally Fit】- This NVMe M.2 heatsink compatible with M.2 2280 SSD . It’s universally fit for laptops and desktop computers, Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 200 x 12mm; Material: aluminum alloy.

More Info

7.87in x 7.87in x 1.5mm Thermal Pads, 6W/m.k Thermal Conductivity,Thermal Silicone Pad Alternative to Thermal Paste/tape, For Laptop/Heatsink/CPU/GPU/SSD Drives/Modules

Search only AVNTKER brand name
7.87in x 7.87in x 1.5mm Thermal Pads, 6W/m.k Thermal Conductivity,Thermal Silicone Pad Alternative to Thermal Paste/tape, For Laptop/Heatsink/CPU/GPU/SSD Drives/Modules

Current price: 15.99 USD


Check price and availability


  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • 【 Unique Silicone Thermal Pad】 Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
  • 【Easy to install】 Only 1.5mm-2.5mm installation height, Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Wide compatibility】Compatible with most laptops and desktop computers, supports PCIe NVMe M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • 【100% copper】High performance Thermal Heatsink;
  • 【The copper heat sink is】 1mm thin,used for compact Laptop space.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 40 x 12mm; Material: aluminum alloy.
  • 🥇 Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).
  • 🥇 Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • 🥇 HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
  • 🥇 Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
  • 🥇 HPFIX double adhesive thermal tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
  • 【Easy for Installation】- Two mounting methods: rubber ring and high temperature insulation sticker for compact space in laptops.
  • 【thermal pad】- Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Materials and Workmanship】- 100% copper, cut and polished,High performance Thermal Heatsink;
  • 【10-20°C Cooling Effect】- Designed for the compact space of laptops,minimum installation height required: 1.5mm., with 10-20°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling.
  • 【Universally Fit】- This NVMe M.2 heatsink compatible with M.2 2280 SSD . It’s universally fit for laptops and desktop computers, Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 200 x 12mm; Material: aluminum alloy.
  • In 50℃-200 ℃ range does can work for a minimum of 5 years, not melt, good stability, no toxic, odorless,no corrosion,no stimulation,non conductive,no damage to metal materials, with any electrical traces would not result in damage of any sort.
  • As we all know, the operating temperature of game consoles is usually very high, and overheating noise or crashes often occur, The thermal pad is a good solution that can cover all the heating components on the game console, reduce working temperature are very suitable for playstation/ps4.
  • Thermal pads great at transferring heat between the heating element and the glass bed of 3d printer, It helps distribute heat evenly across, achieve the best cooling effect, thermal pad soft a little sticky, can be easily removed and repositioned.
  • The soft thermal pad works as the perfect gap filler and bridges uneven surface and gaps, effectively improve heat transfer between CPU/chipset/motherboard/module and heat sink, greatly reduced the working temperature of the computer/laptop, it's like a permanent solution that won't degrade over time.
  • Thermal pad features a thermal conductivity of 6.0W/m-k, Length 7.87in/200mm x Width 7.87in/200mm x Thickness 1.5mm, With High Thermal Conductivity, Insulation, Softness, Compression, Ease Of Install, As Cut, Align, Peel, Overlapping, Clean, Great For Beginners.

More Info

Tintvent Thermal Double Side Tapes,25Mx40mm,Heat Sink Tape,Thermal Adhesive Tape,Thermal Conductive Tape for LED Light,Heat Sink,Computer CPU, GPU Cooler,PC and More, Electrically Insulated

Search only Tintvent brand name
Tintvent Thermal Double Side Tapes,25Mx40mm,Heat Sink Tape,Thermal Adhesive Tape,Thermal Conductive Tape for LED Light,Heat Sink,Computer CPU, GPU Cooler,PC and More, Electrically Insulated

Current price: 18.55 USD


Check price and availability


  • ASSEMBLY WARNING: Only the main SoC and PCI-E USB bridge disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
  • ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
  • IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
  • REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
  • MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FR45DV), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
  • ✔Application:Thermal Pad used in the control board of electronic and electrical products;Pads and foot pads inside and outside the motor; Appliances, automotive machinery, computer hosts, notebook computers, DVDs, VCDs, and any materials that require filling and cooling modules.
  • ✔Good Heat Dissipation:Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between the CPU / chipset / motherboard / module and the heat sink, and also serve as insulation, shock absorption and sealing Equal effect.
  • ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
  • ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
  • ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • 【 Unique Silicone Thermal Pad】 Soft and good ductility, compatible with uneven surfaces. Low viscosity, no damage to the M.2 SSD warranty label.
  • 【Easy to install】 Only 1.5mm-2.5mm installation height, Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Wide compatibility】Compatible with most laptops and desktop computers, supports PCIe NVMe M.2 2280 SSD. Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • 【100% copper】High performance Thermal Heatsink;
  • 【The copper heat sink is】 1mm thin,used for compact Laptop space.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 40 x 12mm; Material: aluminum alloy.
  • 🥇 Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).
  • 🥇 Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • 🥇 HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
  • 🥇 Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
  • 🥇 HPFIX double adhesive thermal tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
  • 【Easy for Installation】- Two mounting methods: rubber ring and high temperature insulation sticker for compact space in laptops.
  • 【thermal pad】- Providing unique silicone0.5mm/1mm Thick 2pcs thermal pad, compatible with uneven surfaces.
  • 【Materials and Workmanship】- 100% copper, cut and polished,High performance Thermal Heatsink;
  • 【10-20°C Cooling Effect】- Designed for the compact space of laptops,minimum installation height required: 1.5mm., with 10-20°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling.
  • 【Universally Fit】- This NVMe M.2 heatsink compatible with M.2 2280 SSD . It’s universally fit for laptops and desktop computers, Perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.
  • ★ Package Content: 2 x Aluminum Water Cooling Block.
  • ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
  • ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
  • ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
  • ★ Water cooling block size: 40 x 200 x 12mm; Material: aluminum alloy.
  • In 50℃-200 ℃ range does can work for a minimum of 5 years, not melt, good stability, no toxic, odorless,no corrosion,no stimulation,non conductive,no damage to metal materials, with any electrical traces would not result in damage of any sort.
  • As we all know, the operating temperature of game consoles is usually very high, and overheating noise or crashes often occur, The thermal pad is a good solution that can cover all the heating components on the game console, reduce working temperature are very suitable for playstation/ps4.
  • Thermal pads great at transferring heat between the heating element and the glass bed of 3d printer, It helps distribute heat evenly across, achieve the best cooling effect, thermal pad soft a little sticky, can be easily removed and repositioned.
  • The soft thermal pad works as the perfect gap filler and bridges uneven surface and gaps, effectively improve heat transfer between CPU/chipset/motherboard/module and heat sink, greatly reduced the working temperature of the computer/laptop, it's like a permanent solution that won't degrade over time.
  • Thermal pad features a thermal conductivity of 6.0W/m-k, Length 7.87in/200mm x Width 7.87in/200mm x Thickness 1.5mm, With High Thermal Conductivity, Insulation, Softness, Compression, Ease Of Install, As Cut, Align, Peel, Overlapping, Clean, Great For Beginners.
  • Thermal tape heat conductivity is high and stable,more obvious than the general heat dissipation sticker, which greatly improves the life of the component, and is the first choice for some high-end electronic products that require heat conduction.
  • Widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • Thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
  • Feature:Thermal Conductive Tape Made of Glass fabric, PSA, PE ,30mmx25Meters 0.2mm Glass Fiber Thickness, Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.It is often used on heat sinks-High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
  • Easy to Use:Thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, easy to eliminate.

More Info

1    2    3    4    5    6    7    8    9    10