Best Desoldering Pumps. Reviews April, 2020

Vastar AD444 Solder Sucker Desoldering Vacuum Pump Solder Removal Tool

Search only Vastar brand name
Vastar AD444 Solder Sucker Desoldering Vacuum Pump Solder Removal Tool

Current price: 7.99 USD


Check price and availability


Height: 0.98 Inches

Length: 2.98 Inches

Width: 1.9 Inches

Weight: 0.04 Pounds

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum

More Info

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

Search only Tabiger brand name
TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

Current price: 9.98 USD

Saving: $3.01 (23%)


Check price and availability


Height: 0.98 Inches

Length: 8.27 Inches

Width: 3.94 Inches

Weight: 42 Grams

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.

More Info

OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) – Desoldering Vacuum Pump Solder Removal Tool

Search only OMORC brand name
OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) – Desoldering Vacuum Pump Solder Removal Tool

Current price: 8.59 USD


Check price and availability


Height: 1.2 Inches

Length: 11.7 Inches

Width: 4.7 Inches

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.

More Info

Weller 7874B Manual ESD-Safe Desoldering Pump with Aluminum Body

Search only Weller brand name
Weller 7874B Manual ESD-Safe Desoldering Pump with Aluminum Body

Current price: 26.1 USD


Check price and availability


Height: 11.25 Inches

Length: 4.5 Inches

Width: 1.5 Inches

Weight: 0.0440924524 Pounds

Warranty: Manufacturer

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • May be used with soldering iron
  • Facilitates accurate printed CIRCUIT repair and cleaning
  • Soldering bulb

More Info

Huanyu Double-Pump Desoldering Gun Desolder 100W Lead-free Soldering Tin Gun Electric Vacuum Pump Solder Sucker Soldering Welding Tool for DIY Electronic Repair Work (110V Model, 1.0mm)

Search only Huanyu brand name
Huanyu Double-Pump Desoldering Gun Desolder 100W Lead-free Soldering Tin Gun Electric Vacuum Pump Solder Sucker Soldering Welding Tool for DIY Electronic Repair Work (110V Model, 1.0mm)

Current price: 278.99 USD


Check price and availability


  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • May be used with soldering iron
  • Facilitates accurate printed CIRCUIT repair and cleaning
  • Soldering bulb
  • 【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn.
  • 【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage.
  • 【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle.
  • 【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation.
  • 【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds.

More Info

Engineer SS-02 Solder Sucker

Search only ENGINEER brand name
Engineer SS-02 Solder Sucker

Current price: 26.16 USD

Saving: $3.54 (12%)


Check price and availability


Height: 0.787401574 Inches

Length: 6.0236220411 Inches

Width: 0.787401574 Inches

Weight: 0.11464037624 Pounds

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • May be used with soldering iron
  • Facilitates accurate printed CIRCUIT repair and cleaning
  • Soldering bulb
  • 【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn.
  • 【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage.
  • 【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle.
  • 【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation.
  • 【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds.
  • Highest quality construction & components used
  • Withstands direct contact with soldering iron (350C Max)
  • Compact design allows easy one handed operation
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)

More Info

Velleman VTDESOL3U Vacuum Desoldering Pump with Heater 30W

Search only Velleman brand name
Velleman VTDESOL3U Vacuum Desoldering Pump with Heater 30W

Current price: 15.95 USD


Check price and availability


Weight: 0.5025 Pounds

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • May be used with soldering iron
  • Facilitates accurate printed CIRCUIT repair and cleaning
  • Soldering bulb
  • 【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn.
  • 【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage.
  • 【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle.
  • 【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation.
  • 【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds.
  • Highest quality construction & components used
  • Withstands direct contact with soldering iron (350C Max)
  • Compact design allows easy one handed operation
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
  • Spare tip (not included): BIT/DESOL3
  • Desoldering pump with heater
  • Easy, single handed operation

More Info

Pro Digital Vacuum Desoldering Station, Anesty Professional Removal Rework Station ZD-915 Iron Gun Built-in Vacuum Pump

Search only Anesty brand name
Pro Digital Vacuum Desoldering Station, Anesty Professional Removal Rework Station ZD-915 Iron Gun Built-in Vacuum Pump

Current price: 129 USD

Saving: $70.00 (35%)


Check price and availability


Height: 6 Inches

Length: 9 Inches

Width: 5 Inches

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • May be used with soldering iron
  • Facilitates accurate printed CIRCUIT repair and cleaning
  • Soldering bulb
  • 【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn.
  • 【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage.
  • 【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle.
  • 【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation.
  • 【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds.
  • Highest quality construction & components used
  • Withstands direct contact with soldering iron (350C Max)
  • Compact design allows easy one handed operation
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
  • Spare tip (not included): BIT/DESOL3
  • Desoldering pump with heater
  • Easy, single handed operation
  • We honor this Pro Digital Vacuum Desoldering Station with 1 year warranty and 60 days money back guarantee. Feel free to contact us at [email protected] We provides hassle-free services within 24 hours if you have any concerns.
  • The heating element is made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
  • The desoldering iron gun if controlled automatically by the micro-processor.
  • Reasonable structure, single hand operation and strong absorbing power can easily remove of the residual solder from one-sided or two sided of the PCB.
  • 【Reminder:The tips have solder on them,you need to turn the unit and let it heat up on first use】The vacuum desoldering station designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering/desoldering all types of DIP components.

More Info

maxmartt Electric Vacuum Solder Sucker Desoldering Pump Blue 30W 220V 50Hz Electric Desoldering Pump Iron Tool Us Plug Drill Rod & Nozzle

Search only maxmartt brand name
maxmartt Electric Vacuum Solder Sucker Desoldering Pump Blue 30W 220V 50Hz Electric Desoldering Pump Iron Tool Us Plug Drill Rod & Nozzle

Current price: 32.39 USD


Check price and availability


Height: 2.362204722 Inches

Length: 11.023622036 Inches

Width: 3.149606296 Inches

Weight: 1.1684499886 Pounds

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • May be used with soldering iron
  • Facilitates accurate printed CIRCUIT repair and cleaning
  • Soldering bulb
  • 【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn.
  • 【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage.
  • 【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle.
  • 【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation.
  • 【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds.
  • Highest quality construction & components used
  • Withstands direct contact with soldering iron (350C Max)
  • Compact design allows easy one handed operation
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
  • Spare tip (not included): BIT/DESOL3
  • Desoldering pump with heater
  • Easy, single handed operation
  • We honor this Pro Digital Vacuum Desoldering Station with 1 year warranty and 60 days money back guarantee. Feel free to contact us at [email protected] We provides hassle-free services within 24 hours if you have any concerns.
  • The heating element is made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
  • The desoldering iron gun if controlled automatically by the micro-processor.
  • Reasonable structure, single hand operation and strong absorbing power can easily remove of the residual solder from one-sided or two sided of the PCB.
  • 【Reminder:The tips have solder on them,you need to turn the unit and let it heat up on first use】The vacuum desoldering station designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering/desoldering all types of DIP components.
  • Package: 1 * Drill rod ; 1 * Nozzle
  • Automatically spit tin, fast and convenient, is to improve the efficiency of maintenance in a good helper
  • Power 5 minutes after the addition of tin can work for a long time
  • Desoldering pump sucker can be used independently with one hand
  • Bulky, strong suction, is a thick film integrated circuit, a large component of the ideal addition to a large tin solder tool products

More Info

Aven 17535 Desoldering Pump with Locking Plunger

Search only Aven brand name
Aven 17535 Desoldering Pump with Locking Plunger

Current price: 5.78 USD


Check price and availability


Height: 1.5 Inches

Length: 12.7 Inches

Width: 1.6 Inches

Weight: 0.000625 Pounds

  • Worry-free warranty: 45 days money-back & 18-month warranty
  • Special design: right or Left handed design allows easy one-handed use
  • Size: 7-1/2" length x 3/4" diameter
  • Light material: aluminum body frame
  • High quality: super high pressure vacuum
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • May be used with soldering iron
  • Facilitates accurate printed CIRCUIT repair and cleaning
  • Soldering bulb
  • 【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn.
  • 【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage.
  • 【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle.
  • 【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation.
  • 【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds.
  • Highest quality construction & components used
  • Withstands direct contact with soldering iron (350C Max)
  • Compact design allows easy one handed operation
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
  • Spare tip (not included): BIT/DESOL3
  • Desoldering pump with heater
  • Easy, single handed operation
  • We honor this Pro Digital Vacuum Desoldering Station with 1 year warranty and 60 days money back guarantee. Feel free to contact us at [email protected] We provides hassle-free services within 24 hours if you have any concerns.
  • The heating element is made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
  • The desoldering iron gun if controlled automatically by the micro-processor.
  • Reasonable structure, single hand operation and strong absorbing power can easily remove of the residual solder from one-sided or two sided of the PCB.
  • 【Reminder:The tips have solder on them,you need to turn the unit and let it heat up on first use】The vacuum desoldering station designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering/desoldering all types of DIP components.
  • Package: 1 * Drill rod ; 1 * Nozzle
  • Automatically spit tin, fast and convenient, is to improve the efficiency of maintenance in a good helper
  • Power 5 minutes after the addition of tin can work for a long time
  • Desoldering pump sucker can be used independently with one hand
  • Bulky, strong suction, is a thick film integrated circuit, a large component of the ideal addition to a large tin solder tool products
  • Length: 11 to 13 inches
  • Locking plunger for compact storage
  • Fully enclosed shaft for safety
  • High vacuum heavy-duty high impact plastic
  • Rugged, manual loading for volume desoldering

More Info

1    2    3    4    5    6    7    8    9    10