Best Desoldering Wicks. Reviews November, 2020

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

Search only NTE Electronics brand name
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098

Current price: 6.88 USD


Check price and availability


  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes

More Info

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

Search only AUSTOR brand name
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

Current price: 10.99 USD


Check price and availability


Height: 0.787401574 Inches

Length: 7.480314953 Inches

Width: 5.118110231 Inches

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand

More Info

MG Chemicals 425-NS #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green

Search only MG Chemicals brand name
MG Chemicals 425-NS #3 No Clean Super Wick Desoldering Braid, 0.075

Current price: 6.49 USD


Check price and availability


Height: 0.393700787 Inches

Length: 1.574803148 Inches

Width: 1.574803148 Inches

Weight: 0.01543235834 Pounds

Warranty: [email protected]

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004

More Info

Aven 17542 Desoldering Wick, 2.5mm Width, 5' Length

Search only Aven brand name
Aven 17542 Desoldering Wick, 2.5mm Width, 5' Length

Current price: 1.81 USD

Saving: $3.60 (67%)


Check price and availability


Weight: 0.03 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • Weight 0.6oz
  • 0.1"L x 5'L
  • Pure oxygen free copper wire
  • Unique no clean flux
  • High quality desoldering braid

More Info

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

Search only Tabiger brand name
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

Current price: 9.99 USD


Check price and availability


Height: 0.7 Inches

Length: 9 Inches

Width: 4 Inches

Weight: 0.17 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • Weight 0.6oz
  • 0.1"L x 5'L
  • Pure oxygen free copper wire
  • Unique no clean flux
  • High quality desoldering braid
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.

More Info

6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Blue, 0.1 Inch Width)

Search only Hotop brand name
6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Blue, 0.1 Inch Width)

Current price: 8.99 USD


Check price and availability


Height: 1.574803148 Inches

Length: 2.755905509 Inches

Width: 3.93700787 Inches

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • Weight 0.6oz
  • 0.1"L x 5'L
  • Pure oxygen free copper wire
  • Unique no clean flux
  • High quality desoldering braid
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs

More Info

Soldering Iron Kit - Soldering Iron 60 W Adjustable Temperature, Digital Multimeter, Stand, Soldering Iron Tip Set, Desoldering Pump, Solder Wick, Tweezers, Rosin, Wire - [110 V, US Plug] from Plusivo

Search only Plusivo brand name
Soldering Iron Kit - Soldering Iron 60 W Adjustable Temperature, Digital Multimeter, Stand, Soldering Iron Tip Set, Desoldering Pump, Solder Wick, Tweezers, Rosin, Wire - [110 V, US Plug] from Plusivo

Current price: 25.99 USD


Check price and availability


Height: 1.968503935 Inches

Length: 6.8897637725 Inches

Width: 10.4330708555 Inches

Weight: 2.23989658192 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • Weight 0.6oz
  • 0.1"L x 5'L
  • Pure oxygen free copper wire
  • Unique no clean flux
  • High quality desoldering braid
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction
  • Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY package
  • Bonus Accessories – 20+ extra items such as pen-shaped screwdriver, desoldering pump/solder sucker, solder, tweezers, wire stripper and cutter, mini screwdrivers, mini PCB, heatshrink tubes and more plus a downloadable ebook
  • Premium Quality Components with safety features – high quality soldering iron, stand, multimeter and all other accessories; soldering iron with heat-resistant cap and grip, digital multimeter with all-around protection and stand function
  • Complete Soldering Iron Kit with Multimeter – necessary tools that are widely used for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, other do-it-yourself solder applications, crafts/jewelry making and other uses

More Info

6 Packs Solder Braid Wick Desoldering Wicks, Accurate Adsorption Low Residue No-Clean Solder,1.0/1.5/2.0/2.5/3.0/3.5mm Width 1.5m Length.

Search only JOERRES brand name
6 Packs Solder Braid Wick Desoldering Wicks, Accurate Adsorption Low Residue No-Clean Solder,1.0/1.5/2.0/2.5/3.0/3.5mm Width 1.5m Length.

Current price: 13.99 USD


Check price and availability


Height: 2.362204722 Inches

Length: 1.7716535415 Inches

Width: 1.7716535415 Inches

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • Weight 0.6oz
  • 0.1"L x 5'L
  • Pure oxygen free copper wire
  • Unique no clean flux
  • High quality desoldering braid
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction
  • Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY package
  • Bonus Accessories – 20+ extra items such as pen-shaped screwdriver, desoldering pump/solder sucker, solder, tweezers, wire stripper and cutter, mini screwdrivers, mini PCB, heatshrink tubes and more plus a downloadable ebook
  • Premium Quality Components with safety features – high quality soldering iron, stand, multimeter and all other accessories; soldering iron with heat-resistant cap and grip, digital multimeter with all-around protection and stand function
  • Complete Soldering Iron Kit with Multimeter – necessary tools that are widely used for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, other do-it-yourself solder applications, crafts/jewelry making and other uses
  • No-Clean Design: The solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards. Once the copper wick is saturated, you clip off the end and start over.
  • Applications:Intended for smaller desoldering projects and working in small areas. The braided solder wicks are suitable for labs, home and industry welding work, like correct errors on small PCB boards.
  • Easy to Use: You just put it on the cold solder joint and heat up the wick with the solder iron. It can sucks up just about all of the solder in the joint.the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. Desoldering sucker is also good which is small and easy to operate.
  • Material:The Solder wick is the high-quality stuff which made of copper wires , high on flux, high on density,work well in a pinch, make you as fast as possible,increasing your efficiency.Desoldering sucker is also good which is small and easy to operate.
  • Package Included:6 Packs solder braided wicks , each wick is about 1.0/1.5/2.0/2.5/3.0/3.5mm/ 0.04/0.06/0.08/0.1/0.12/0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and total 9m/29.5 feet length for your daily needs.

More Info

MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075" Width, Green

Search only MG Chemicals brand name
MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075

Current price: 15.17 USD


Check price and availability


Height: 0.3 Inches

Length: 2.3 Inches

Width: 2.2 Inches

Weight: 0.000625 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • Weight 0.6oz
  • 0.1"L x 5'L
  • Pure oxygen free copper wire
  • Unique no clean flux
  • High quality desoldering braid
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction
  • Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY package
  • Bonus Accessories – 20+ extra items such as pen-shaped screwdriver, desoldering pump/solder sucker, solder, tweezers, wire stripper and cutter, mini screwdrivers, mini PCB, heatshrink tubes and more plus a downloadable ebook
  • Premium Quality Components with safety features – high quality soldering iron, stand, multimeter and all other accessories; soldering iron with heat-resistant cap and grip, digital multimeter with all-around protection and stand function
  • Complete Soldering Iron Kit with Multimeter – necessary tools that are widely used for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, other do-it-yourself solder applications, crafts/jewelry making and other uses
  • No-Clean Design: The solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards. Once the copper wick is saturated, you clip off the end and start over.
  • Applications:Intended for smaller desoldering projects and working in small areas. The braided solder wicks are suitable for labs, home and industry welding work, like correct errors on small PCB boards.
  • Easy to Use: You just put it on the cold solder joint and heat up the wick with the solder iron. It can sucks up just about all of the solder in the joint.the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. Desoldering sucker is also good which is small and easy to operate.
  • Material:The Solder wick is the high-quality stuff which made of copper wires , high on flux, high on density,work well in a pinch, make you as fast as possible,increasing your efficiency.Desoldering sucker is also good which is small and easy to operate.
  • Package Included:6 Packs solder braided wicks , each wick is about 1.0/1.5/2.0/2.5/3.0/3.5mm/ 0.04/0.06/0.08/0.1/0.12/0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and total 9m/29.5 feet length for your daily needs.
  • Designed to leave a residue that is environmentally safe
  • Manufactured under SPC guidelines
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Static free bobbins
  • Oxide-free clean copper

More Info

MIYAKO Desoldering Wick Wire Roll in Handy Dispenser 5 Ft

Search only MIYAKO brand name
MIYAKO Desoldering Wick Wire Roll in Handy Dispenser 5 Ft

Current price: 6.25 USD


Check price and availability


Height: 2 Inches

Length: 3.1 Inches

Width: 0.1 Inches

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
  • Environmentally and PCB safe residues
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • High purity, oxide-free copper
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • Weight 0.6oz
  • 0.1"L x 5'L
  • Pure oxygen free copper wire
  • Unique no clean flux
  • High quality desoldering braid
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Satisfaction Guarantee – every purchase is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction
  • Durable and Convenient Carry Bag – assorted tools come handy in a durable easy-to-carry PU bag; keeps all the components organized, easy to carry, store and transport anywhere; everything you wanted in a home DIY package
  • Bonus Accessories – 20+ extra items such as pen-shaped screwdriver, desoldering pump/solder sucker, solder, tweezers, wire stripper and cutter, mini screwdrivers, mini PCB, heatshrink tubes and more plus a downloadable ebook
  • Premium Quality Components with safety features – high quality soldering iron, stand, multimeter and all other accessories; soldering iron with heat-resistant cap and grip, digital multimeter with all-around protection and stand function
  • Complete Soldering Iron Kit with Multimeter – necessary tools that are widely used for soldering projects, home DIY fixing jobs, electrical, electronics and appliance repairs, circuit board welding, other do-it-yourself solder applications, crafts/jewelry making and other uses
  • No-Clean Design: The solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards. Once the copper wick is saturated, you clip off the end and start over.
  • Applications:Intended for smaller desoldering projects and working in small areas. The braided solder wicks are suitable for labs, home and industry welding work, like correct errors on small PCB boards.
  • Easy to Use: You just put it on the cold solder joint and heat up the wick with the solder iron. It can sucks up just about all of the solder in the joint.the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. Desoldering sucker is also good which is small and easy to operate.
  • Material:The Solder wick is the high-quality stuff which made of copper wires , high on flux, high on density,work well in a pinch, make you as fast as possible,increasing your efficiency.Desoldering sucker is also good which is small and easy to operate.
  • Package Included:6 Packs solder braided wicks , each wick is about 1.0/1.5/2.0/2.5/3.0/3.5mm/ 0.04/0.06/0.08/0.1/0.12/0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and total 9m/29.5 feet length for your daily needs.
  • Designed to leave a residue that is environmentally safe
  • Manufactured under SPC guidelines
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Static free bobbins
  • Oxide-free clean copper
  • 0.1"L x 5'L Weight 0.6oz
  • Pure oxygen free copper wire
  • High quality desoldering braid
  • 1.5m (approx. 5 ft) roll in handy dispenser.
  • 2 mm solder wick braid removes solder from all types of connections.

More Info

1    2    3    4    5    6    7    8    9    10