Best Desoldering Wicks. Reviews August, 2020

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

Search only NTE Electronics brand name
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098

Current price: 6.88 USD


Check price and availability


  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes

More Info

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

Search only Tabiger brand name
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

Current price: 9.98 USD

Saving: $6.01 (38%)


Check price and availability


Height: 0.7 Inches

Length: 9 Inches

Width: 4 Inches

Weight: 0.17 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.

More Info

MG Chemicals #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green

Search only MG Chemicals brand name
MG Chemicals #3 No Clean Super Wick Desoldering Braid, 0.075

Current price: 6.87 USD


Check price and availability


Height: 0.03937 Inches

Length: 0.15748 Inches

Width: 0.0074803 Inches

Weight: 0.01543235834 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick

More Info

6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

Search only Hotop brand name
6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

Current price: 9.99 USD


Check price and availability


Height: 1.574803148 Inches

Length: 2.755905509 Inches

Width: 3.93700787 Inches

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs

More Info

Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length

Search only Vastar brand name
Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length

Current price: 7.99 USD


Check price and availability


Height: 1.2 Inches

Length: 4.68 Inches

Width: 3.8 Inches

Weight: 0.01 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
  • Geometrically-precise weave
  • Pure oxygen free copper wire
  • Unique no clean flux for easy to use
  • High quality desoldering braid

More Info

MIYAKO Desoldering Wick Wire Roll in Handy Dispenser 5 Ft

Search only MIYAKO brand name
MIYAKO Desoldering Wick Wire Roll in Handy Dispenser 5 Ft

Current price: 6.25 USD


Check price and availability


Height: 2 Inches

Length: 3.1 Inches

Width: 0.1 Inches

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
  • Geometrically-precise weave
  • Pure oxygen free copper wire
  • Unique no clean flux for easy to use
  • High quality desoldering braid
  • 0.1"L x 5'L Weight 0.6oz
  • Pure oxygen free copper wire
  • High quality desoldering braid
  • 1.5m (approx. 5 ft) roll in handy dispenser.
  • 2 mm solder wick braid removes solder from all types of connections.

More Info

MG Chemicals 426-NS #4 No Clean Super Wick Desoldering Braid, 0.1" Width x 5' Length, Blue

Search only MG Chemicals brand name
MG Chemicals 426-NS #4 No Clean Super Wick Desoldering Braid, 0.1

Current price: 6.37 USD


Check price and availability


Height: 0.03937 Inches

Length: 0.15748 Inches

Width: 0.03937 Inches

Weight: 0.01543235834 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
  • Geometrically-precise weave
  • Pure oxygen free copper wire
  • Unique no clean flux for easy to use
  • High quality desoldering braid
  • 0.1"L x 5'L Weight 0.6oz
  • Pure oxygen free copper wire
  • High quality desoldering braid
  • 1.5m (approx. 5 ft) roll in handy dispenser.
  • 2 mm solder wick braid removes solder from all types of connections.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • Disclaimer: Color may vary slightly according to screen settings and resolution
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Flux residue is non-conductive and non-corrosive.Static free bobbins.
  • No clean super wick

More Info

PINCHUANG 10PCS Solder Wick, Desoldering Wick, Solder Braid, Copper Solder 1.5mm Width, 15m (15ft) length

Search only PINCHUANG brand name
PINCHUANG 10PCS Solder Wick, Desoldering Wick, Solder Braid, Copper Solder 1.5mm Width, 15m (15ft) length

Current price: 9.99 USD


Check price and availability


  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
  • Geometrically-precise weave
  • Pure oxygen free copper wire
  • Unique no clean flux for easy to use
  • High quality desoldering braid
  • 0.1"L x 5'L Weight 0.6oz
  • Pure oxygen free copper wire
  • High quality desoldering braid
  • 1.5m (approx. 5 ft) roll in handy dispenser.
  • 2 mm solder wick braid removes solder from all types of connections.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • Disclaimer: Color may vary slightly according to screen settings and resolution
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Flux residue is non-conductive and non-corrosive.Static free bobbins.
  • No clean super wick
  • Our Guarantee:If you are not satisfied for any reason, just return for a refund of your purchase price; we promise 24 hours customer support, please feel free to contact us for any product&order problem.
  • Easy to operate: Remove more solder than conventional wick and also easy to correct mistakes on small PCB boards.
  • High Quality: Anti-static, heat resistant and durable. Made from pure oxygen free copper wire.
  • Package: 10pcs solder wick braid, whose Width 1.5mm, Total Length 15m

More Info

NTE Electronics SW02-25 No-Clean Solder Wick, 4 Blue.098" Width, 25' Length

Search only NTE Electronics brand name
NTE Electronics SW02-25 No-Clean Solder Wick, 4 Blue.098

Current price: 15.7 USD


Check price and availability


Width: 4 Inches

Weight: 0.000625 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
  • Geometrically-precise weave
  • Pure oxygen free copper wire
  • Unique no clean flux for easy to use
  • High quality desoldering braid
  • 0.1"L x 5'L Weight 0.6oz
  • Pure oxygen free copper wire
  • High quality desoldering braid
  • 1.5m (approx. 5 ft) roll in handy dispenser.
  • 2 mm solder wick braid removes solder from all types of connections.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • Disclaimer: Color may vary slightly according to screen settings and resolution
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Flux residue is non-conductive and non-corrosive.Static free bobbins.
  • No clean super wick
  • Our Guarantee:If you are not satisfied for any reason, just return for a refund of your purchase price; we promise 24 hours customer support, please feel free to contact us for any product&order problem.
  • Easy to operate: Remove more solder than conventional wick and also easy to correct mistakes on small PCB boards.
  • High Quality: Anti-static, heat resistant and durable. Made from pure oxygen free copper wire.
  • Package: 10pcs solder wick braid, whose Width 1.5mm, Total Length 15m
  • Available with standard or anti-static bobbins
  • 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is Halide free and non-conductive, so it does NOT have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes

More Info

MG Chemicals Desoldering Braid #424 Fine Braid Super Wick with RMA Flux, 5' Length x 0.05" Width, Yellow

Search only MG Chemicals brand name
MG Chemicals Desoldering Braid #424 Fine Braid Super Wick with RMA Flux, 5' Length x 0.05

Current price: 6.48 USD


Check price and availability


Height: 0.4 Inches

Length: 7.8 Inches

Width: 4 Inches

Weight: 0.01543235834 Pounds

  • Available with standard or anti-static bobbins
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Static free bobbins
  • Flux residue is non-conductive and non-corrosive
  • No clean super wick
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
  • Geometrically-precise weave
  • Pure oxygen free copper wire
  • Unique no clean flux for easy to use
  • High quality desoldering braid
  • 0.1"L x 5'L Weight 0.6oz
  • Pure oxygen free copper wire
  • High quality desoldering braid
  • 1.5m (approx. 5 ft) roll in handy dispenser.
  • 2 mm solder wick braid removes solder from all types of connections.
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
  • Disclaimer: Color may vary slightly according to screen settings and resolution
  • High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
  • Flux residue remaining on board does not have to be cleaned
  • Flux residue is non-conductive and non-corrosive.Static free bobbins.
  • No clean super wick
  • Our Guarantee:If you are not satisfied for any reason, just return for a refund of your purchase price; we promise 24 hours customer support, please feel free to contact us for any product&order problem.
  • Easy to operate: Remove more solder than conventional wick and also easy to correct mistakes on small PCB boards.
  • High Quality: Anti-static, heat resistant and durable. Made from pure oxygen free copper wire.
  • Package: 10pcs solder wick braid, whose Width 1.5mm, Total Length 15m
  • Available with standard or anti-static bobbins
  • 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Residue left behind is Halide free and non-conductive, so it does NOT have to be cleaned off the board
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes
  • ESD Safe Spools - Yes
  • NSF - Nonfood Compounds Program Listed P1, NSF Registration #144208
  • Designed to leave a residue that is environmentally safe
  • Manufactured under SPC guidelines
  • Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
  • Static free bobbins
  • Oxide-free clean copper

More Info

1    2    3    4    5    6    7    8    9    10