Best Differential Bearings. Reviews January, 2021

USA Standard Gear (ZBKF8.8) Bearing Kit for Ford 8.8 Differential

Search only USA Standard Gear brand name
USA Standard Gear (ZBKF8.8) Bearing Kit for Ford 8.8 Differential

Current price: 57.25 USD

Saving: $35.21 (38%)


Check price and availability


Height: 4 Inches

Length: 32 Inches

Width: 4 Inches

Weight: 4.89 Pounds

Warranty: 1 year warranty against Manufacturer defects

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts

More Info

USA Standard Gear (ZBKGM8.6) Bearing Kit for GM 8.6 Differential

Search only USA Standard Gear brand name
USA Standard Gear (ZBKGM8.6) Bearing Kit for GM 8.6 Differential

Current price: 86.23 USD

Saving: $5.00 (5%)


Check price and availability


Height: 3 Inches

Length: 12 Inches

Width: 13 Inches

Weight: 4.72 Pounds

Warranty: 1 year warranty against Manufacturer defects

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts

More Info

OTC 6602 Differential Bearing Preload Wrench

Search only OTC brand name
OTC 6602 Differential Bearing Preload Wrench

Current price: 49.92 USD


Check price and availability


Height: 3.4 Inches

Length: 8.5 Inches

Width: 34 Inches

Weight: 1.88 Pounds

Warranty: Limited lifetime warranty

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164

More Info

USA Standard Gear (ZK C9.25-R-B) Master Overhaul Kit for Chrysler 9.25 Rear Differential

Search only USA Standard Gear brand name
USA Standard Gear (ZK C9.25-R-B) Master Overhaul Kit for Chrysler 9.25 Rear Differential

Current price: 113.59 USD

Saving: $91.97 (45%)


Check price and availability


Height: 3 Inches

Length: 12 Inches

Width: 12 Inches

Weight: 6.54 Pounds

Warranty: 1 year warranty against Manufacturer defects

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)
  • This kit uses Koyo bearings and races
  • USA Standard Master Overhaul kits let you finish your install with confidence

More Info

All Balls 25-2010 Rear Differential Bearing and Seal Kit

Search only All Balls brand name
All Balls 25-2010 Rear Differential Bearing and Seal Kit

Current price: 67.25 USD


Check price and availability


Height: 2.4 Inches

Length: 5 Inches

Width: 7.9 Inches

Warranty: 1- Warranty Year

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)
  • This kit uses Koyo bearings and races
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • Fit type: Vehicle Specific
  • part number: 25-2010
  • be sure to verify your vehicle for proper fitment
  • honda kits contain a pinion repair sleeve to fix worn pinion shafts
  • kit contains all of the bearings and seals required to repair the differential

More Info

USA Standard Gear (ZBKC8.25-B) Bearing Kit for Chrysler 8.25 Differential

Search only USA Standard Gear brand name
USA Standard Gear (ZBKC8.25-B) Bearing Kit for Chrysler 8.25 Differential

Current price: 101.52 USD


Check price and availability


Height: 4 Inches

Length: 19 Inches

Width: 3 Inches

Weight: 4.82 Pounds

Warranty: 1 year warranty against Manufacturer defects

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)
  • This kit uses Koyo bearings and races
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • Fit type: Vehicle Specific
  • part number: 25-2010
  • be sure to verify your vehicle for proper fitment
  • honda kits contain a pinion repair sleeve to fix worn pinion shafts
  • kit contains all of the bearings and seals required to repair the differential
  • Fit type: Vehicle Specific
  • usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • this kit uses koyo bearings and races along with all high quality small parts

More Info

DURASOLID Carrier & Pinion Bearing Puller Dana 30, 40,60, 70, 80, Ford 10.25"

Search only DURASOLID brand name
DURASOLID Carrier & Pinion Bearing Puller Dana 30, 40,60, 70, 80, Ford 10.25

Current price: 236.95 USD


Check price and availability


Weight: 31.9 Pounds

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)
  • This kit uses Koyo bearings and races
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • Fit type: Vehicle Specific
  • part number: 25-2010
  • be sure to verify your vehicle for proper fitment
  • honda kits contain a pinion repair sleeve to fix worn pinion shafts
  • kit contains all of the bearings and seals required to repair the differential
  • Fit type: Vehicle Specific
  • usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • this kit uses koyo bearings and races along with all high quality small parts
  • This tool is not used for removing pinion bearings on Dana 80.
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Carrier bearing puller

More Info

Cycle ATV - Rear Differential Bearing and Seal Kit fits Honda FourTrax 300 TRX300

Search only CycleATV brand name
Cycle ATV - Rear Differential Bearing and Seal Kit fits Honda FourTrax 300 TRX300

Current price: 39.15 USD


Check price and availability


Height: 1 Inches

Length: 6.5 Inches

Width: 7.5 Inches

Weight: 1.39 Pounds

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)
  • This kit uses Koyo bearings and races
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • Fit type: Vehicle Specific
  • part number: 25-2010
  • be sure to verify your vehicle for proper fitment
  • honda kits contain a pinion repair sleeve to fix worn pinion shafts
  • kit contains all of the bearings and seals required to repair the differential
  • Fit type: Vehicle Specific
  • usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • this kit uses koyo bearings and races along with all high quality small parts
  • This tool is not used for removing pinion bearings on Dana 80.
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Carrier bearing puller
  • Please check fitment for year, make and model of your machine.
  • Kits include all necessary parts specific to your machine
  • OEM specifications for easy installation
  • Rear Differential Kit: includes 3- Bearings, 4- Oil Seals, 1- Needle Bearing, 1- Metal Sleeve, 2- C-Rings, 1- O-Ring.

More Info

Bentolin 6602 Differential Bearing Preload Wrench, Steel Textured Black Powdercoat Finish

Search only Bentolin brand name
Bentolin 6602 Differential Bearing Preload Wrench, Steel Textured Black Powdercoat Finish

Current price: 24.99 USD


Check price and availability


  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)
  • This kit uses Koyo bearings and races
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • Fit type: Vehicle Specific
  • part number: 25-2010
  • be sure to verify your vehicle for proper fitment
  • honda kits contain a pinion repair sleeve to fix worn pinion shafts
  • kit contains all of the bearings and seals required to repair the differential
  • Fit type: Vehicle Specific
  • usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • this kit uses koyo bearings and races along with all high quality small parts
  • This tool is not used for removing pinion bearings on Dana 80.
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Carrier bearing puller
  • Please check fitment for year, make and model of your machine.
  • Kits include all necessary parts specific to your machine
  • OEM specifications for easy installation
  • Rear Differential Kit: includes 3- Bearings, 4- Oil Seals, 1- Needle Bearing, 1- Metal Sleeve, 2- C-Rings, 1- O-Ring.
  • Similar to Miller C-4164
  • Made of high quality steel and features a fine textured black powdercoat finish for lasting durability.
  • The Bearing Preload Wrench Tool is able to loosen the differential bearing adjusters inside the housing through the axle tube ( you need to use with socket)
  • Fits inside axle tube to access the threaded adjusters, after removing the axle shafts, this tool slid right in and engaged the adjusters easily.
  • Use it to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4", 8-1/4", 8-3/4", and 9-1/4" rear axles.

More Info

East Lake Axle front differential bearing & seal kit compatible with Polaris RZR 570/800 / 900/1000 2011 2012 2013 2014 2015 2016 2017

Search only East Lake Axle brand name
East Lake Axle front differential bearing & seal kit compatible with Polaris RZR 570/800 / 900/1000 2011 2012 2013 2014 2015 2016 2017

Current price: 75.99 USD


Check price and availability


Weight: 0.5 Pounds

Warranty: 1 Year Warranty

  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Fit type: Vehicle Specific
  • Includes Installation Guide
  • USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • Kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • This kit uses Koyo bearings and races along with all high quality small parts
  • Weighs only 2lbs. 14oz.
  • Use to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles
  • Fits inside axle tube to access the threaded adjusters
  • Similar to Miller C-4164
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable)
  • This kit uses Koyo bearings and races
  • USA Standard Master Overhaul kits let you finish your install with confidence
  • Fit type: Vehicle Specific
  • part number: 25-2010
  • be sure to verify your vehicle for proper fitment
  • honda kits contain a pinion repair sleeve to fix worn pinion shafts
  • kit contains all of the bearings and seals required to repair the differential
  • Fit type: Vehicle Specific
  • usa standard gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring and pinion set
  • kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush
  • this kit uses koyo bearings and races along with all high quality small parts
  • This tool is not used for removing pinion bearings on Dana 80.
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Carrier bearing puller
  • Please check fitment for year, make and model of your machine.
  • Kits include all necessary parts specific to your machine
  • OEM specifications for easy installation
  • Rear Differential Kit: includes 3- Bearings, 4- Oil Seals, 1- Needle Bearing, 1- Metal Sleeve, 2- C-Rings, 1- O-Ring.
  • Similar to Miller C-4164
  • Made of high quality steel and features a fine textured black powdercoat finish for lasting durability.
  • The Bearing Preload Wrench Tool is able to loosen the differential bearing adjusters inside the housing through the axle tube ( you need to use with socket)
  • Fits inside axle tube to access the threaded adjusters, after removing the axle shafts, this tool slid right in and engaged the adjusters easily.
  • Use it to adjust differential bearing free play on Chrysler/Dodge vehicles with 7-1/4", 8-1/4", 8-3/4", and 9-1/4" rear axles.
  • 1 Year Warranty
  • OEM Replacement differential bearings & seals
  • Please verify your year, make and model in the product details before purchasing.

More Info

1    2    3    4    5    6    7    8    9    10