Best Electric Speed Controllers. Reviews July, 2020

80A RC Electric Speed Controller ESC for Brushless Motors 5.5v 4A UBEC with XT60 & 3.5mm Bullet Plugs

Search only RC Electric Parts brand name
80A RC Electric Speed Controller ESC for Brushless Motors 5.5v 4A UBEC with XT60 & 3.5mm Bullet Plugs

Current price: 35.99 USD


Check price and availability


Height: 0.71 Inches

Length: 1.42 Inches

Width: 0.71 Inches

Weight: 0.15 Pounds

  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs

More Info

RC Electric Speed Controller (ESC) Programming Card for RC Electric Parts ESCs

Search only RC Electric Parts brand name
RC Electric Speed Controller (ESC) Programming Card for RC Electric Parts ESCs

Current price: 14.99 USD


Check price and availability


  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card

More Info

30A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs

Search only RC Electric Parts brand name
30A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs

Current price: 16.49 USD


Check price and availability


Height: 0.98 Inches

Length: 2.09 Inches

Width: 0.43 Inches

Weight: 0.110231131 Pounds

  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs

More Info

40A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs

Search only RC Electric Parts brand name
40A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs

Current price: 21.49 USD


Check price and availability


Height: 0.98 Inches

Length: 2.09 Inches

Width: 0.43 Inches

Weight: 0.09 Pounds

  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs

More Info

60A RC Brushless Motor Electric Speed Controller ESC 4A UBEC with XT60 & 3.5mm bullet plugs

Search only RC Electric Parts brand name
60A RC Brushless Motor Electric Speed Controller ESC 4A UBEC with XT60 & 3.5mm bullet plugs

Current price: 27.49 USD


Check price and availability


Height: 0.71 Inches

Length: 2.99 Inches

Width: 1.42 Inches

Weight: 0.15 Pounds

  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs

More Info

Motor Brushless Controller,36V 48V 350W Waterproof Electric Bicycle Scooter Brushless Controller Kit with LCD Display Meter

Search only WonVon brand name
Motor Brushless Controller,36V 48V 350W Waterproof Electric Bicycle Scooter Brushless Controller Kit with LCD Display Meter

Current price: 59.99 USD


Check price and availability


  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • 【Wide application】This electric bicycle brushless motor controller is easy to install and use, comes with mount for LCD display and it is suitable for 22.5mm handlebar.
  • 【Heat dissoption】The controller shell is made of high quality metal with groove design, which can protect the inner circuit due to good heat dissipation feature to avoid thermal overloading.
  • 【LCD display】LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.
  • 【Sensitive control】The brushless motor controller can provide steady speed and sensitive control of braking and direction changes.
  • 【Premium material】This display adopts good quality materials, lightweight, rainproof, sturdy and durable.

More Info

HGLRC FSESC ESC V4.12 50A SK8-ESC Open Source Project Compatible with ESC Software Electronic Speed Controller for Electric Skateboard E-Bike ESK8 Build EScooter

Search only HGLRC brand name
HGLRC FSESC ESC V4.12 50A SK8-ESC Open Source Project Compatible with ESC Software Electronic Speed Controller for Electric Skateboard E-Bike ESK8 Build EScooter

Current price: 72.87 USD

Saving: $24.12 (25%)


Check price and availability


Height: 0.787401574 Inches

Length: 2.362204722 Inches

Width: 1.574803148 Inches

Weight: 0.220462262 Pounds

  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • 【Wide application】This electric bicycle brushless motor controller is easy to install and use, comes with mount for LCD display and it is suitable for 22.5mm handlebar.
  • 【Heat dissoption】The controller shell is made of high quality metal with groove design, which can protect the inner circuit due to good heat dissipation feature to avoid thermal overloading.
  • 【LCD display】LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.
  • 【Sensitive control】The brushless motor controller can provide steady speed and sensitive control of braking and direction changes.
  • 【Premium material】This display adopts good quality materials, lightweight, rainproof, sturdy and durable.
  • 【4-layer PCB Board 】The PCB adopts is gold-thickening process with a 4-layer . The thickness of each layer of copper foil is 3OZ, and the total copper foil thickness is 3OZ*4=12OZ
  • 【High-end quality capacitors 】 3pcs 68Ouf 63V capacitors to keep ESC perform the sensor cable stable when it speeds up or slows down
  • 【Reliable and progressive electric braking 】allows you to use sensorless motors to achieve smooth start-up from a stop , It also provides strong reliable and progressive electric braking
  • 【Easy wire management 】highly modifiable electronic speed controller designed for DIY Electric Skateboards , Custom design but easy wire management
  • 【Open Source Project 】Based upon the ESC Open Source Project and compatible with VESC Software , come with regenerative braking capabilities .

More Info

DOMINTY 48-72V 1500W Electric Bicycle Brushless Speed Motor Controller for Electric Scooter e-Bike ATV Go Kart Tricycle Moped

Search only DOMINTY brand name
DOMINTY 48-72V 1500W Electric Bicycle Brushless Speed Motor Controller for Electric Scooter e-Bike ATV Go Kart Tricycle Moped

Current price: 46.95 USD


Check price and availability


  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • 【Wide application】This electric bicycle brushless motor controller is easy to install and use, comes with mount for LCD display and it is suitable for 22.5mm handlebar.
  • 【Heat dissoption】The controller shell is made of high quality metal with groove design, which can protect the inner circuit due to good heat dissipation feature to avoid thermal overloading.
  • 【LCD display】LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.
  • 【Sensitive control】The brushless motor controller can provide steady speed and sensitive control of braking and direction changes.
  • 【Premium material】This display adopts good quality materials, lightweight, rainproof, sturdy and durable.
  • 【4-layer PCB Board 】The PCB adopts is gold-thickening process with a 4-layer . The thickness of each layer of copper foil is 3OZ, and the total copper foil thickness is 3OZ*4=12OZ
  • 【High-end quality capacitors 】 3pcs 68Ouf 63V capacitors to keep ESC perform the sensor cable stable when it speeds up or slows down
  • 【Reliable and progressive electric braking 】allows you to use sensorless motors to achieve smooth start-up from a stop , It also provides strong reliable and progressive electric braking
  • 【Easy wire management 】highly modifiable electronic speed controller designed for DIY Electric Skateboards , Custom design but easy wire management
  • 【Open Source Project 】Based upon the ESC Open Source Project and compatible with VESC Software , come with regenerative braking capabilities .
  • The product according to market demand to do without Hall zero start, brushless dual-mode smart measure battery voltage, motor phase.
  • Fits for 8 wires (3 phase-cables & 5 hall-cables) DC brushless motors.
  • Suitable for electric bicycle & scooter,Mechanical or electric forklift etc.
  • Perfect replacement for the old or damaged one
  • 48V-72V1500W Electric Bicycle Brushless Motor Controller for Scooter E-Bike.

More Info

Flipsky Mini FSESC4.20 50A SK8-ESC Electric Speed Controller with Aluminum Anodized Heat Sink for ESC Software Electric Skateboard E-Bike ESK8 Build EScooter (Mini V4)

Search only Flipsky brand name
Flipsky Mini FSESC4.20 50A SK8-ESC Electric Speed Controller with Aluminum Anodized Heat Sink for ESC Software Electric Skateboard E-Bike ESK8 Build EScooter (Mini V4)

Current price: 79.39 USD


Check price and availability


Height: 18 Millimeters

Length: 67 Millimeters

Width: 39 Millimeters

  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • 【Wide application】This electric bicycle brushless motor controller is easy to install and use, comes with mount for LCD display and it is suitable for 22.5mm handlebar.
  • 【Heat dissoption】The controller shell is made of high quality metal with groove design, which can protect the inner circuit due to good heat dissipation feature to avoid thermal overloading.
  • 【LCD display】LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.
  • 【Sensitive control】The brushless motor controller can provide steady speed and sensitive control of braking and direction changes.
  • 【Premium material】This display adopts good quality materials, lightweight, rainproof, sturdy and durable.
  • 【4-layer PCB Board 】The PCB adopts is gold-thickening process with a 4-layer . The thickness of each layer of copper foil is 3OZ, and the total copper foil thickness is 3OZ*4=12OZ
  • 【High-end quality capacitors 】 3pcs 68Ouf 63V capacitors to keep ESC perform the sensor cable stable when it speeds up or slows down
  • 【Reliable and progressive electric braking 】allows you to use sensorless motors to achieve smooth start-up from a stop , It also provides strong reliable and progressive electric braking
  • 【Easy wire management 】highly modifiable electronic speed controller designed for DIY Electric Skateboards , Custom design but easy wire management
  • 【Open Source Project 】Based upon the ESC Open Source Project and compatible with VESC Software , come with regenerative braking capabilities .
  • The product according to market demand to do without Hall zero start, brushless dual-mode smart measure battery voltage, motor phase.
  • Fits for 8 wires (3 phase-cables & 5 hall-cables) DC brushless motors.
  • Suitable for electric bicycle & scooter,Mechanical or electric forklift etc.
  • Perfect replacement for the old or damaged one
  • 48V-72V1500W Electric Bicycle Brushless Motor Controller for Scooter E-Bike.
  • With Aluminum Anodized Heat Sink to avoid over heat
  • Powerf System:50A continuous,instantaneous current 150A,Voltage 8V-60V, support 3-13S LiPo battery
  • It is a highly modifiable electronic speed controller designed with DIY Electric Skateboards conversions in mind.
  • The HGLRC-Flipsky ESC is based upon the ESC Open Source Project, and compatible with ESC Software.
  • Application areas:Electric Skateboard Longboard Scooter DIY Skateboard ,E-Bike,EScooter

More Info

szzijia 24v 24 Volt 500w Motor Brush Speed Controller for Electric Bike Bicycle Scooter

Search only szzijia brand name
szzijia 24v 24 Volt 500w Motor Brush Speed Controller for Electric Bike Bicycle Scooter

Current price: 18.56 USD


Check price and availability


  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Only works with RC Electric Parts ESCs
  • Lightweight and small
  • Plug and Power ESC - Settings are saved in seconds
  • Choose settings simply by moving jumpers
  • Easy to use Programming Card
  • Programmable - Programming Card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5v/3A UBEC (Very Efficient) - ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • Programmable - Programming card or using Transmitter
  • Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
  • LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v
  • 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
  • Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
  • 【Wide application】This electric bicycle brushless motor controller is easy to install and use, comes with mount for LCD display and it is suitable for 22.5mm handlebar.
  • 【Heat dissoption】The controller shell is made of high quality metal with groove design, which can protect the inner circuit due to good heat dissipation feature to avoid thermal overloading.
  • 【LCD display】LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.
  • 【Sensitive control】The brushless motor controller can provide steady speed and sensitive control of braking and direction changes.
  • 【Premium material】This display adopts good quality materials, lightweight, rainproof, sturdy and durable.
  • 【4-layer PCB Board 】The PCB adopts is gold-thickening process with a 4-layer . The thickness of each layer of copper foil is 3OZ, and the total copper foil thickness is 3OZ*4=12OZ
  • 【High-end quality capacitors 】 3pcs 68Ouf 63V capacitors to keep ESC perform the sensor cable stable when it speeds up or slows down
  • 【Reliable and progressive electric braking 】allows you to use sensorless motors to achieve smooth start-up from a stop , It also provides strong reliable and progressive electric braking
  • 【Easy wire management 】highly modifiable electronic speed controller designed for DIY Electric Skateboards , Custom design but easy wire management
  • 【Open Source Project 】Based upon the ESC Open Source Project and compatible with VESC Software , come with regenerative braking capabilities .
  • The product according to market demand to do without Hall zero start, brushless dual-mode smart measure battery voltage, motor phase.
  • Fits for 8 wires (3 phase-cables & 5 hall-cables) DC brushless motors.
  • Suitable for electric bicycle & scooter,Mechanical or electric forklift etc.
  • Perfect replacement for the old or damaged one
  • 48V-72V1500W Electric Bicycle Brushless Motor Controller for Scooter E-Bike.
  • With Aluminum Anodized Heat Sink to avoid over heat
  • Powerf System:50A continuous,instantaneous current 150A,Voltage 8V-60V, support 3-13S LiPo battery
  • It is a highly modifiable electronic speed controller designed with DIY Electric Skateboards conversions in mind.
  • The HGLRC-Flipsky ESC is based upon the ESC Open Source Project, and compatible with ESC Software.
  • Application areas:Electric Skateboard Longboard Scooter DIY Skateboard ,E-Bike,EScooter
  • Match Motor:24V 500W
  • Current Limit:28A+-1AShort Voltege
  • Protection:20V+-0.5V
  • Speed Regulator 1-4 V(Throttle )
  • This item Suitable for electric bike & scooter

More Info

1    2    3    4    5    6    7    8    9    10