Best Electrical Motor Mounts. Reviews September, 2020

2 HP SPL 3450 RPM, 56 Frame, 120/240V, 15/7.5Amp 5/8" Shaft, Single Phase NEMA Air Compressor Motor - EM-02

Search only EMZ brand name
2 HP SPL 3450 RPM, 56 Frame, 120/240V, 15/7.5Amp 5/8

Current price: 149.95 USD


Check price and availability


  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof

More Info

BEMONOC Micro DC Motor 775 Series 12V/24V DC Motor Mounting Bracket

Search only DC Motor brand name
BEMONOC Micro DC Motor 775 Series 12V/24V DC Motor Mounting Bracket

Current price: 8.99 USD


Check price and availability


  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space

More Info

Leeson Electric Leeson Motors - 5HP, 230V, 3450RPM, DP, Rigid Mount, 1.0 S. F.

Search only Leeson Electric brand name
Leeson Electric Leeson Motors - 5HP, 230V, 3450RPM, DP, Rigid Mount, 1.0 S. F.

Current price: 320.97 USD


Check price and availability


Height: 12 Inches

Length: 20 Inches

Width: 12 Inches

Weight: 50 Pounds

  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0

More Info

VEVOR 5 Hp Electric Motor 3.1 KW Rated Speed 3450 RPM Single Phase Motor AC 208-230V Air Compressor Motor Suit for Home and Small Shop Air Compressors

Search only VEVOR brand name
VEVOR 5 Hp Electric Motor 3.1 KW Rated Speed 3450 RPM Single Phase Motor AC 208-230V Air Compressor Motor Suit for Home and Small Shop Air Compressors

Current price: 195.99 USD

Saving: $10.00 (5%)


Check price and availability


  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0
  • This is a 5 hp electric motor that is commonly used for home and small shop air compressors
  • This new electric motor is waterproof, can be used outdoors
  • A single phase motor that has a rigid base and 5/8 inch keyed shaft
  • Rated speed of the motor is 3450 RPM and synchronous speed is 3600 RPM
  • The electric motor horsepower: 5 HP;Voltage: 208-230 V;Model:CM05256

More Info

Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor

Search only A.O. Smith brand name
Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor

Current price: 99.95 USD


Check price and availability


Height: 6.5 Inches

Length: 10.5 Inches

Width: 6.5 Inches

Weight: 17.61 Pounds

  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0
  • This is a 5 hp electric motor that is commonly used for home and small shop air compressors
  • This new electric motor is waterproof, can be used outdoors
  • A single phase motor that has a rigid base and 5/8 inch keyed shaft
  • Rated speed of the motor is 3450 RPM and synchronous speed is 3600 RPM
  • The electric motor horsepower: 5 HP;Voltage: 208-230 V;Model:CM05256
  • Split phase motor. 1 Year Manufacture Warranty
  • Automatic Overload Protection; Service Factor 1.25
  • 48 Frame; Rotation - Reversible; Sleeve Bearings
  • Resilient Cradle Base - 1/2" x 1 1/2" Diameter Shaft; 3" Shaft Height
  • 1/2 hp 1725 RPM, 7.2 amps, 115 Volts 60 hz.

More Info

DROK 4pcs Black 37mm DC Gear Motors Mounting Bracket, Iron Anti-rust Gearbox L-shape Fixed Seat, Gear Reduction Motor Holder

Search only DROK brand name
DROK 4pcs Black 37mm DC Gear Motors Mounting Bracket, Iron Anti-rust Gearbox L-shape Fixed Seat, Gear Reduction Motor Holder

Current price: 12.99 USD


Check price and availability


Weight: 0.3086471668 Pounds

  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0
  • This is a 5 hp electric motor that is commonly used for home and small shop air compressors
  • This new electric motor is waterproof, can be used outdoors
  • A single phase motor that has a rigid base and 5/8 inch keyed shaft
  • Rated speed of the motor is 3450 RPM and synchronous speed is 3600 RPM
  • The electric motor horsepower: 5 HP;Voltage: 208-230 V;Model:CM05256
  • Split phase motor. 1 Year Manufacture Warranty
  • Automatic Overload Protection; Service Factor 1.25
  • 48 Frame; Rotation - Reversible; Sleeve Bearings
  • Resilient Cradle Base - 1/2" x 1 1/2" Diameter Shaft; 3" Shaft Height
  • 1/2 hp 1725 RPM, 7.2 amps, 115 Volts 60 hz.
  • Package Includes: 4* 37mm DC geared motor fixed seat
  • Effortless Installation: This metal motor holder has convenient holes for mounting. The precision cut mounting holes is perfect matched with M3*6mm screw.
  • Universal Size: DROK geared motor mounting seat can be widely used in 37mm small gear motor series.
  • Anti-rust Paint Technique: DROK 37mm DC deceleration motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term.

More Info

BestTong Motor Mounting Bracket, 550 545 540 DC Motor Fixed Mount Mounting Base Cutting Machine Clamp Seat Support Bracket 2 Pack

Search only BestTong brand name
BestTong Motor Mounting Bracket, 550 545 540 DC Motor Fixed Mount Mounting Base Cutting Machine Clamp Seat Support Bracket 2 Pack

Current price: 10.99 USD


Check price and availability


  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0
  • This is a 5 hp electric motor that is commonly used for home and small shop air compressors
  • This new electric motor is waterproof, can be used outdoors
  • A single phase motor that has a rigid base and 5/8 inch keyed shaft
  • Rated speed of the motor is 3450 RPM and synchronous speed is 3600 RPM
  • The electric motor horsepower: 5 HP;Voltage: 208-230 V;Model:CM05256
  • Split phase motor. 1 Year Manufacture Warranty
  • Automatic Overload Protection; Service Factor 1.25
  • 48 Frame; Rotation - Reversible; Sleeve Bearings
  • Resilient Cradle Base - 1/2" x 1 1/2" Diameter Shaft; 3" Shaft Height
  • 1/2 hp 1725 RPM, 7.2 amps, 115 Volts 60 hz.
  • Package Includes: 4* 37mm DC geared motor fixed seat
  • Effortless Installation: This metal motor holder has convenient holes for mounting. The precision cut mounting holes is perfect matched with M3*6mm screw.
  • Universal Size: DROK geared motor mounting seat can be widely used in 37mm small gear motor series.
  • Anti-rust Paint Technique: DROK 37mm DC deceleration motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term.
  • Package included: 2 Pack of 550 545 540 motor mount bracket(Screws Included)
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option.
  • 550 Motor bracket, adopting electroplating process, have good anti-rust effect
  • Material: Steel; Screw holes: M3; M4(Motor is NOT included); Fixed 550 545 540 motors firmly, convenient to use the saw blade
  • Fit to the 550 545 540 motor as a bracket or holder

More Info

WMYCONGCONG DC 12/24V 30W High Speed CW/CCW Permanent Magnet DC Motor (12V DC 3500RPM) and 37mm Dia DC Geared Motor Mounting Bracket Holder w/ 6mm Hex Coupling

Search only WMYCONGCONG brand name
WMYCONGCONG DC 12/24V 30W High Speed CW/CCW Permanent Magnet DC Motor (12V DC 3500RPM) and 37mm Dia DC Geared Motor Mounting Bracket Holder w/ 6mm Hex Coupling

Current price: 24.98 USD


Check price and availability


  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0
  • This is a 5 hp electric motor that is commonly used for home and small shop air compressors
  • This new electric motor is waterproof, can be used outdoors
  • A single phase motor that has a rigid base and 5/8 inch keyed shaft
  • Rated speed of the motor is 3450 RPM and synchronous speed is 3600 RPM
  • The electric motor horsepower: 5 HP;Voltage: 208-230 V;Model:CM05256
  • Split phase motor. 1 Year Manufacture Warranty
  • Automatic Overload Protection; Service Factor 1.25
  • 48 Frame; Rotation - Reversible; Sleeve Bearings
  • Resilient Cradle Base - 1/2" x 1 1/2" Diameter Shaft; 3" Shaft Height
  • 1/2 hp 1725 RPM, 7.2 amps, 115 Volts 60 hz.
  • Package Includes: 4* 37mm DC geared motor fixed seat
  • Effortless Installation: This metal motor holder has convenient holes for mounting. The precision cut mounting holes is perfect matched with M3*6mm screw.
  • Universal Size: DROK geared motor mounting seat can be widely used in 37mm small gear motor series.
  • Anti-rust Paint Technique: DROK 37mm DC deceleration motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term.
  • Package included: 2 Pack of 550 545 540 motor mount bracket(Screws Included)
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option.
  • 550 Motor bracket, adopting electroplating process, have good anti-rust effect
  • Material: Steel; Screw holes: M3; M4(Motor is NOT included); Fixed 550 545 540 motors firmly, convenient to use the saw blade
  • Fit to the 550 545 540 motor as a bracket or holder
  • Package Content: 1 x DC Motor 12V 3500RPM + 2x DC Geared Motor Bracket + 2x 6mm Hex Coupling + 1x Hex Wrench + 1 x Accessories.
  • Universal mounting hubs are designed to work with most 6mm shafts, mounting holes for 4-40 screws (not included).
  • Bracket Size: 46 x 42 x 40mm/1.8 x 1.65 x 1.6"(L * W * H); Bracket Mounting Hole Dia: 3.5mm/0.14"
  • Hex Coupler Size: 18 x 12mm / 0.71 x 0.47"; Ellipse Hole Size: 27 x 13mm / 1.06 x 0.51".
  • Permanent magnet DC motor, can be applied to cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment. It drives up the super smooth, almost no noise.

More Info

Rubber Motor Mount

Search only Broan brand name
Rubber Motor Mount

Current price: 6.99 USD


Check price and availability


Height: 1.2 Inches

Length: 2 Inches

Width: 2 Inches

Weight: 0.00625 Pounds

  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0
  • This is a 5 hp electric motor that is commonly used for home and small shop air compressors
  • This new electric motor is waterproof, can be used outdoors
  • A single phase motor that has a rigid base and 5/8 inch keyed shaft
  • Rated speed of the motor is 3450 RPM and synchronous speed is 3600 RPM
  • The electric motor horsepower: 5 HP;Voltage: 208-230 V;Model:CM05256
  • Split phase motor. 1 Year Manufacture Warranty
  • Automatic Overload Protection; Service Factor 1.25
  • 48 Frame; Rotation - Reversible; Sleeve Bearings
  • Resilient Cradle Base - 1/2" x 1 1/2" Diameter Shaft; 3" Shaft Height
  • 1/2 hp 1725 RPM, 7.2 amps, 115 Volts 60 hz.
  • Package Includes: 4* 37mm DC geared motor fixed seat
  • Effortless Installation: This metal motor holder has convenient holes for mounting. The precision cut mounting holes is perfect matched with M3*6mm screw.
  • Universal Size: DROK geared motor mounting seat can be widely used in 37mm small gear motor series.
  • Anti-rust Paint Technique: DROK 37mm DC deceleration motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term.
  • Package included: 2 Pack of 550 545 540 motor mount bracket(Screws Included)
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option.
  • 550 Motor bracket, adopting electroplating process, have good anti-rust effect
  • Material: Steel; Screw holes: M3; M4(Motor is NOT included); Fixed 550 545 540 motors firmly, convenient to use the saw blade
  • Fit to the 550 545 540 motor as a bracket or holder
  • Package Content: 1 x DC Motor 12V 3500RPM + 2x DC Geared Motor Bracket + 2x 6mm Hex Coupling + 1x Hex Wrench + 1 x Accessories.
  • Universal mounting hubs are designed to work with most 6mm shafts, mounting holes for 4-40 screws (not included).
  • Bracket Size: 46 x 42 x 40mm/1.8 x 1.65 x 1.6"(L * W * H); Bracket Mounting Hole Dia: 3.5mm/0.14"
  • Hex Coupler Size: 18 x 12mm / 0.71 x 0.47"; Ellipse Hole Size: 27 x 13mm / 1.06 x 0.51".
  • Permanent magnet DC motor, can be applied to cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment. It drives up the super smooth, almost no noise.
  • Price For: Each Includes: Instructions For Use With Mfr. Model Number: 360 Fits Brand: Broan Item: Rubber Motor Mount Country of Origin (subject to change): United States

More Info

Leeson Contractor Power Saw Electric Motor - 3 HP, 3,600 RPM, 230 Volts, Single Phase, Model Number 120728

Search only Leeson brand name
Leeson Contractor Power Saw Electric Motor - 3 HP, 3,600 RPM, 230 Volts, Single Phase, Model Number 120728

Current price: 559.83 USD


Check price and availability


Height: 13.8 Inches

Length: 18 Inches

Width: 14 Inches

Weight: 55 Pounds

  • NEMA Motor is Non-Reversible CCW (Counter Clockwise) ONLY
  • Frame Type:56, 5/8" Keyed shaft, Shaft length:2 1/16"
  • 2 HP SPL 3450 RPM
  • Single phase Full Load amps: 15/7.5Amp, 120/240V
  • Open dripproof
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option. They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
  • Overall Motor Length = 13.22 inches, motor name plate shows wiring diagram
  • NEMA 145T Frame - Shaft: 7/8" x 2 1/4"
  • Open Drip Proof - Rigid Base Mounting - Electrically Reversible
  • Manual Overload Protection - Ball Bearings - Class F Insulation
  • 5 hp 3450 RPM 145T,230V 60hz, 20.8 amps - Service Factor 1.0
  • This is a 5 hp electric motor that is commonly used for home and small shop air compressors
  • This new electric motor is waterproof, can be used outdoors
  • A single phase motor that has a rigid base and 5/8 inch keyed shaft
  • Rated speed of the motor is 3450 RPM and synchronous speed is 3600 RPM
  • The electric motor horsepower: 5 HP;Voltage: 208-230 V;Model:CM05256
  • Split phase motor. 1 Year Manufacture Warranty
  • Automatic Overload Protection; Service Factor 1.25
  • 48 Frame; Rotation - Reversible; Sleeve Bearings
  • Resilient Cradle Base - 1/2" x 1 1/2" Diameter Shaft; 3" Shaft Height
  • 1/2 hp 1725 RPM, 7.2 amps, 115 Volts 60 hz.
  • Package Includes: 4* 37mm DC geared motor fixed seat
  • Effortless Installation: This metal motor holder has convenient holes for mounting. The precision cut mounting holes is perfect matched with M3*6mm screw.
  • Universal Size: DROK geared motor mounting seat can be widely used in 37mm small gear motor series.
  • Anti-rust Paint Technique: DROK 37mm DC deceleration motor fixed seat adopts advanced anti-rust paint technique, which makes the bracket be used for a long-term.
  • Package included: 2 Pack of 550 545 540 motor mount bracket(Screws Included)
  • The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option.
  • 550 Motor bracket, adopting electroplating process, have good anti-rust effect
  • Material: Steel; Screw holes: M3; M4(Motor is NOT included); Fixed 550 545 540 motors firmly, convenient to use the saw blade
  • Fit to the 550 545 540 motor as a bracket or holder
  • Package Content: 1 x DC Motor 12V 3500RPM + 2x DC Geared Motor Bracket + 2x 6mm Hex Coupling + 1x Hex Wrench + 1 x Accessories.
  • Universal mounting hubs are designed to work with most 6mm shafts, mounting holes for 4-40 screws (not included).
  • Bracket Size: 46 x 42 x 40mm/1.8 x 1.65 x 1.6"(L * W * H); Bracket Mounting Hole Dia: 3.5mm/0.14"
  • Hex Coupler Size: 18 x 12mm / 0.71 x 0.47"; Ellipse Hole Size: 27 x 13mm / 1.06 x 0.51".
  • Permanent magnet DC motor, can be applied to cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment. It drives up the super smooth, almost no noise.
  • Price For: Each Includes: Instructions For Use With Mfr. Model Number: 360 Fits Brand: Broan Item: Rubber Motor Mount Country of Origin (subject to change): United States
  • Includes: 50" Long 14/3 Power Cord Less Plug Frame: 145Y Voltage: 230 Shaft Length: 1-13/16" Voltage Compatibility: 230, 240, 115/230, 120/240 HP: 3 Ins. Class: B Full Load Amps: 13.0 Motor Thermal Protection: None Motor Mounting Type: Rigid Base Length Less Shaft: 11-1/16" Shaft Dia.: 3/4" Country of Origin (subject to change): United States
  • Price For: Each Nameplate RPM: 3450 Item: Table Saw Motor Motor Service Factor: 1.00 Motor Bearings: Ball Motor Application: Power Tool Motor Design: Capacitor-Start Motor Enclosure Design: Totally Enclosed Fan-Cooled Hz: 60 Ambient Temperature: 40 Degrees C Motor Shaft Rotation: CW/CCW Phase: 1 Standards: UL Recognized (E57948), CSA Certified (LR33543)

More Info

1    2    3    4    5    6    7    8    9    10