Best Electronic Speed Governors. Reviews December, 2020

findmall ESD5500E Electronic Engine Speed Controller Governor Generator Genset Parts

Search only findmall brand name
findmall ESD5500E Electronic Engine Speed Controller Governor Generator Genset Parts

Current price: 42.65 USD


Check price and availability


  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E

More Info

Generator Speed Controller, Electronic Engine Speed Controller Governor 3044196 Generator Speed Control Board, 1KHz~6.5khz

Search only Walfront brand name
Generator Speed Controller, Electronic Engine Speed Controller Governor 3044196 Generator Speed Control Board, 1KHz~6.5khz

Current price: 82.89 USD


Check price and availability


Weight: 1.7857443222 Pounds

  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.

More Info

Friday Part Electronic Engine Speed Controller Governor ESD5500E Generator Genset

Search only Friday Part brand name
Friday Part Electronic Engine Speed Controller Governor ESD5500E Generator Genset

Current price: 60 USD


Check price and availability


  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E

More Info

Dynatek Speed Governor DSG2-1

Search only Dynatek brand name
Dynatek Speed Governor DSG2-1

Current price: 248.53 USD


Check price and availability


Height: 6 Inches

Length: 6 Inches

Width: 6 Inches

Weight: 0.4 Pounds

  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E
  • Easy to install with no modifications to the factory harness
  • Uses factory connectors
  • Allows full power to be used up to the programmed speed limit
  • Designed for industrial or other applications where a lower-than-stock speed limiter is required

More Info

FridayParts Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19

Search only FP FRIDAYPARTS brand name
FridayParts Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19

Current price: 79 USD


Check price and availability


  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E
  • Easy to install with no modifications to the factory harness
  • Uses factory connectors
  • Allows full power to be used up to the programmed speed limit
  • Designed for industrial or other applications where a lower-than-stock speed limiter is required
  • EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
  • Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19
  • New aftermarket parts

More Info

Speed Controller Control Governor 3098693 for Cummins Engine KTA19

Search only FridayParts brand name
Speed Controller Control Governor 3098693 for Cummins Engine KTA19

Current price: 75 USD


Check price and availability


  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E
  • Easy to install with no modifications to the factory harness
  • Uses factory connectors
  • Allows full power to be used up to the programmed speed limit
  • Designed for industrial or other applications where a lower-than-stock speed limiter is required
  • EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
  • Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19
  • New aftermarket parts
  • Fits Cummins Engine KTA19GC, KTA19 G CMEICS K123, KTA19GC CM558, QSK19 CM500, QSK19 CM850 MCRS, K19, QSK19G, QSK19 CM2150 MCRS, QSK19 CM2350 K105
  • Speed Controller Control Governor 3098693 for Cummins Engine KTA19
  • New aftermarket parts

More Info

Knowtek 12V ESD2210 Engine Speed Control Unit ESD2210-12controller Governor

Search only Knowtek brand name
Knowtek 12V ESD2210 Engine Speed Control Unit ESD2210-12controller Governor

Current price: 179.99 USD


Check price and availability


Warranty: 1year

  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E
  • Easy to install with no modifications to the factory harness
  • Uses factory connectors
  • Allows full power to be used up to the programmed speed limit
  • Designed for industrial or other applications where a lower-than-stock speed limiter is required
  • EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
  • Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19
  • New aftermarket parts
  • Fits Cummins Engine KTA19GC, KTA19 G CMEICS K123, KTA19GC CM558, QSK19 CM500, QSK19 CM850 MCRS, K19, QSK19G, QSK19 CM2150 MCRS, QSK19 CM2350 K105
  • Speed Controller Control Governor 3098693 for Cummins Engine KTA19
  • New aftermarket parts
  • Non-interacting performance controls allow near optimum response to be easily ob tained.
  • ESD2210 is designed for high reliability and it’s hard potted to withstand the engine environ ment.Simplicity of installation and adjustment was foremost in the design.
  • ESD2210 is closed loop control, when connected to a proportional electric actuator and sup plied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode.
  • ESD2210 Speed controller have 12V product ESD2210-12 and 24V product ESD2210-24. Pls choose the right product.
  • The ESD2200 Series  speed control unit is an all-electronic device designed to control engine speed with fast and precise response to transient load changes.

More Info

Sturdy 12V/24V Sealed Stable Electronic Governor Speed Controller Diesel Speed Control Board Generator Accessories Electrical for Self-starting Controller

Search only Oumefar brand name
Sturdy 12V/24V Sealed Stable Electronic Governor Speed Controller Diesel Speed Control Board Generator Accessories Electrical for Self-starting Controller

Current price: 97.29 USD


Check price and availability


Weight: 1.88936158534 Pounds

  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E
  • Easy to install with no modifications to the factory harness
  • Uses factory connectors
  • Allows full power to be used up to the programmed speed limit
  • Designed for industrial or other applications where a lower-than-stock speed limiter is required
  • EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
  • Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19
  • New aftermarket parts
  • Fits Cummins Engine KTA19GC, KTA19 G CMEICS K123, KTA19GC CM558, QSK19 CM500, QSK19 CM850 MCRS, K19, QSK19G, QSK19 CM2150 MCRS, QSK19 CM2350 K105
  • Speed Controller Control Governor 3098693 for Cummins Engine KTA19
  • New aftermarket parts
  • Non-interacting performance controls allow near optimum response to be easily ob tained.
  • ESD2210 is designed for high reliability and it’s hard potted to withstand the engine environ ment.Simplicity of installation and adjustment was foremost in the design.
  • ESD2210 is closed loop control, when connected to a proportional electric actuator and sup plied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode.
  • ESD2210 Speed controller have 12V product ESD2210-12 and 24V product ESD2210-24. Pls choose the right product.
  • The ESD2200 Series  speed control unit is an all-electronic device designed to control engine speed with fast and precise response to transient load changes.
  • The inside of the module is sealed with epoxy resin.
  • The actuator has short-circuit protection to extend service life.
  • Strong external anti-interference can reduce the interference to the unit controller, and keep the unit stable operation.
  • The product is applicable to self-starting controller to start the unit, reduce black smoke and facilitate start-up.
  • The shell of the module is made of aluminum, and the surface is treated with spray plastic.

More Info

Oumefar Stable Sturdy 12V/24V Generator Accessories Diesel Speed Control Board Electronic Governor Speed Controller for Self-Starting Controller

Search only Oumefar brand name
Oumefar Stable Sturdy 12V/24V Generator Accessories Diesel Speed Control Board Electronic Governor Speed Controller for Self-Starting Controller

Current price: 97.29 USD


Check price and availability


Weight: 1.88936158534 Pounds

  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E
  • Easy to install with no modifications to the factory harness
  • Uses factory connectors
  • Allows full power to be used up to the programmed speed limit
  • Designed for industrial or other applications where a lower-than-stock speed limiter is required
  • EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
  • Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19
  • New aftermarket parts
  • Fits Cummins Engine KTA19GC, KTA19 G CMEICS K123, KTA19GC CM558, QSK19 CM500, QSK19 CM850 MCRS, K19, QSK19G, QSK19 CM2150 MCRS, QSK19 CM2350 K105
  • Speed Controller Control Governor 3098693 for Cummins Engine KTA19
  • New aftermarket parts
  • Non-interacting performance controls allow near optimum response to be easily ob tained.
  • ESD2210 is designed for high reliability and it’s hard potted to withstand the engine environ ment.Simplicity of installation and adjustment was foremost in the design.
  • ESD2210 is closed loop control, when connected to a proportional electric actuator and sup plied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode.
  • ESD2210 Speed controller have 12V product ESD2210-12 and 24V product ESD2210-24. Pls choose the right product.
  • The ESD2200 Series  speed control unit is an all-electronic device designed to control engine speed with fast and precise response to transient load changes.
  • The inside of the module is sealed with epoxy resin.
  • The actuator has short-circuit protection to extend service life.
  • Strong external anti-interference can reduce the interference to the unit controller, and keep the unit stable operation.
  • The product is applicable to self-starting controller to start the unit, reduce black smoke and facilitate start-up.
  • The shell of the module is made of aluminum, and the surface is treated with spray plastic.
  • The product is applicable to self-starting controller to start the unit, reduce black smoke and facilitate start-up.
  • The actuator has short-circuit protection to extend service life.
  • The shell of the module is made of aluminum, and the surface is treated with spray plastic.
  • The inside of the module is sealed with epoxy resin.
  • Strong external anti-interference can reduce the interference to the unit controller, and keep the unit stable operation.

More Info

Electronic Governor Speed Controller Generator Accessories Sealed 12V/24V Stable Diesel Speed Control Board for Self-starting Controller

Search only Oumefar brand name
Electronic Governor Speed Controller Generator Accessories Sealed 12V/24V Stable Diesel Speed Control Board for Self-starting Controller

Current price: 89.19 USD


Check price and availability


Weight: 1.88936158534 Pounds

  • Isochronous Operation/Steady State Stability ± 0.25% or better Speed Range/Governor 1K-7.5K Hz continuous Speed Drift with Temperature ± 1% Maximun
  • Compatible Model:Speed Controller
  • Remote Variable Speed Range 500 -7.5Hz. or any part thereof Terminal Sensitivity
  • 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
  • Part Number:ESD5500E
  • ✔【OPERATING FREQUENCY OF 3800HZ】-----The above performance parameters are measured at the operating frequency of 3800Hz.
  • ✔【EASY TO INSTALL & PRE-ADJUST】-----It is easy to install and can be pre-adjustments. For input multiple machines or special purpose machines.
  • ✔【FULL CLOSED-LOOP CONTROL】-----High quality 3044196 electronic speed controller, stable performance. Full closed-loop control technology. Fast and accurate response to control engine speed
  • ✔【PREVENT REVERSE VOLTAGE】-----In the design, it is easy to install and can be pre-adjustments, including adjusting the idle speed and work, to assist for input multiple machines or special purpose machines, as well as to prevent reverse battery voltage, transient voltage pulse implementation of the short-circuit fault and security in case of loss of speed sensor signal or power supply and so on.
  • ✔【FAST AND ACCURATE RESPONSE】-----This 3044196 electronic speed controller with full closed-loop control technology, it is the moment to load changes with fast and accurate response to control engine speed, when connected to the matching EFC Series electric actuators and magnetic speed sensor signal , can be perfectly controlled engine.
  • Electronic Engine Speed Controller Governor ESD5500E Generator Genset
  • ESD5500E
  • Easy to install with no modifications to the factory harness
  • Uses factory connectors
  • Allows full power to be used up to the programmed speed limit
  • Designed for industrial or other applications where a lower-than-stock speed limiter is required
  • EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
  • Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit for Cummins Engine KTA50 KTA38 KTA19
  • New aftermarket parts
  • Fits Cummins Engine KTA19GC, KTA19 G CMEICS K123, KTA19GC CM558, QSK19 CM500, QSK19 CM850 MCRS, K19, QSK19G, QSK19 CM2150 MCRS, QSK19 CM2350 K105
  • Speed Controller Control Governor 3098693 for Cummins Engine KTA19
  • New aftermarket parts
  • Non-interacting performance controls allow near optimum response to be easily ob tained.
  • ESD2210 is designed for high reliability and it’s hard potted to withstand the engine environ ment.Simplicity of installation and adjustment was foremost in the design.
  • ESD2210 is closed loop control, when connected to a proportional electric actuator and sup plied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode.
  • ESD2210 Speed controller have 12V product ESD2210-12 and 24V product ESD2210-24. Pls choose the right product.
  • The ESD2200 Series  speed control unit is an all-electronic device designed to control engine speed with fast and precise response to transient load changes.
  • The inside of the module is sealed with epoxy resin.
  • The actuator has short-circuit protection to extend service life.
  • Strong external anti-interference can reduce the interference to the unit controller, and keep the unit stable operation.
  • The product is applicable to self-starting controller to start the unit, reduce black smoke and facilitate start-up.
  • The shell of the module is made of aluminum, and the surface is treated with spray plastic.
  • The product is applicable to self-starting controller to start the unit, reduce black smoke and facilitate start-up.
  • The actuator has short-circuit protection to extend service life.
  • The shell of the module is made of aluminum, and the surface is treated with spray plastic.
  • The inside of the module is sealed with epoxy resin.
  • Strong external anti-interference can reduce the interference to the unit controller, and keep the unit stable operation.
  • The product is applicable to self-starting controller to start the unit, reduce black smoke and facilitate start-up.
  • Strong external anti-interference can reduce the interference to the unit controller, and keep the unit stable operation.
  • The actuator has short-circuit protection to extend service life.
  • The inside of the module is sealed with epoxy resin.
  • The shell of the module is made of aluminum, and the surface is treated with spray plastic.

More Info

1    2    3    4    5    6    7    8    9    10