Best Engine Heaters. Reviews August, 2020

HOTSTART ENGINE HEATER TPS151GT10-000 COOLANT PRE-HEATER - Original - 1 YEAR WARRANTY

Search only Hotstart brand name
HOTSTART ENGINE HEATER TPS151GT10-000 COOLANT PRE-HEATER - Original - 1 YEAR WARRANTY

Current price: 124.74 USD


Check price and availability


Height: 5 Inches

Length: 8 Inches

Width: 4 Inches

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".

More Info

ABN Silicone Heating Pad 120V - 4 x 5 Inch Universal Engine Heater Car Oil Pan Heater Pad, 150W Electric Heater Pad

Search only ABN brand name
ABN Silicone Heating Pad 120V - 4 x 5 Inch Universal Engine Heater Car Oil Pan Heater Pad, 150W Electric Heater Pad

Current price: 24.99 USD


Check price and availability


Height: 1 Inches

Length: 7 Inches

Width: 5 Inches

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad

More Info

Kat's 24150 150 Watt 4"x 5" Engine Oil Pan Heater

Search only Kat's brand name
Kat's 24150 150 Watt 4

Current price: 23.5 USD

Saving: $5.70 (20%)


Check price and availability


Height: 8.5 Inches

Length: 15 Inches

Width: 9.5 Inches

Weight: 0.3 Pounds

Warranty: 1 year from date of sale to the original consumer against defects in workmanship and materials.

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance

More Info

Kat's 11900 Magnetic Engine Heater

Search only Kat's brand name
Kat's 11900 Magnetic Engine Heater

Current price: 72.99 USD


Check price and availability


Height: 9.5 Inches

Length: 2.5 Inches

Width: 7 Inches

Weight: 1.6 Pounds

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance
  • 300W Magnetic Heater CSA

More Info

Thunder Parts HOTSTART Engine Heater TPS101GT10-000 - Coolant preheater - Original - 1 Year Warranty!

Search only Thunder Parts brand name
Thunder Parts HOTSTART Engine Heater TPS101GT10-000 - Coolant preheater - Original - 1 Year Warranty!

Current price: 126.99 USD


Check price and availability


  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance
  • 300W Magnetic Heater CSA
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Engine Displacement: 350 CID (5.7 L)
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications

More Info

Kat's 13150 1500 Watt Aluminum Circulating Tank Heater

Search only Kat's brand name
Kat's 13150 1500 Watt Aluminum Circulating Tank Heater

Current price: 57.57 USD

Saving: $20.12 (26%)


Check price and availability


Height: 8.5 Inches

Length: 15 Inches

Width: 9.5 Inches

Weight: 2.2 Pounds

Warranty: 1 year from date of sale to the original consumer against defects in workmanship and materials.

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance
  • 300W Magnetic Heater CSA
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Engine Displacement: 350 CID (5.7 L)
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Fit type: Vehicle Specific

More Info

Zerostart 3400017 Portable Electric Heat Magnet Heater for Transmissions, Oil Pans and Small Engines | CSA Approved | 120 Volts | 200 Watts

Search only Zerostart brand name
Zerostart 3400017 Portable Electric Heat Magnet Heater for Transmissions, Oil Pans and Small Engines | CSA Approved | 120 Volts | 200 Watts

Current price: 51.89 USD

Saving: $11.10 (18%)


Check price and availability


Height: 2.95 Inches

Length: 4.41 Inches

Width: 2.5 Inches

Weight: 1.1 Pounds

Warranty: 1 year manufacturer's warranty

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance
  • 300W Magnetic Heater CSA
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Engine Displacement: 350 CID (5.7 L)
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Fit type: Vehicle Specific
  • Fit Type: Universal Fit
  • Quick grip handle protects hands from heat
  • Ideal heater for large or small (non-aluminum) engine blocks: tractors, snowmobiles, motorcycles, snow blowers, generators, farm equipment; Also oil pans, transmissions, hydraulic equipment, steel gutters and stock tanks
  • 200 watts, 120 Volts AC; built-in thermostat maintains optimum temperature - will not exceed 250˚F (121˚c)
  • Provides heat where and when you need it
  • Multi-use utility heater with built-in thermostat that maintains optimum temperature on any metallic surface

More Info

Kat's 1155 200 Watt Magnetic Heater

Search only Kat's brand name
Kat's 1155 200 Watt Magnetic Heater

Current price: 39.99 USD

Saving: $7.99 (17%)


Check price and availability


Height: 9.5 Inches

Length: 12.5 Inches

Width: 8.5 Inches

Weight: 0.01 Pounds

Warranty: 1 year from date of sale to the original consumer against defects in workmanship and materials.

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance
  • 300W Magnetic Heater CSA
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Engine Displacement: 350 CID (5.7 L)
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Fit type: Vehicle Specific
  • Fit Type: Universal Fit
  • Quick grip handle protects hands from heat
  • Ideal heater for large or small (non-aluminum) engine blocks: tractors, snowmobiles, motorcycles, snow blowers, generators, farm equipment; Also oil pans, transmissions, hydraulic equipment, steel gutters and stock tanks
  • 200 watts, 120 Volts AC; built-in thermostat maintains optimum temperature - will not exceed 250˚F (121˚c)
  • Provides heat where and when you need it
  • Multi-use utility heater with built-in thermostat that maintains optimum temperature on any metallic surface
  • Order New Number 1155X
  • Convenient, reliable with no mechanical installation
  • May also be used for warming hydraulic systems or thawing frozen gutters, livestock feeders, locks, and pipes
  • Applications can include oil pan, engine block, battery holder or intake manifold
  • Uses include snow blowers, chainsaws, snowmobiles, or other small engines

More Info

Zerostart 3500043 Engine Block Heater for Ford, Mercury, Lincoln, International, Caterpillar, Detroit Diesel, Hino, Mack, Nissan, 3/4" NPT Thread | CSA Approved | 120 Volts | 1000 Watts

Search only Zerostart brand name
Zerostart 3500043 Engine Block Heater for Ford, Mercury, Lincoln, International, Caterpillar, Detroit Diesel, Hino, Mack, Nissan, 3/4

Current price: 51.05 USD

Saving: $13.94 (21%)


Check price and availability


Height: 3.62 Inches

Length: 7.4 Inches

Width: 6.06 Inches

Weight: 0.97 Pounds

  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance
  • 300W Magnetic Heater CSA
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Engine Displacement: 350 CID (5.7 L)
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Fit type: Vehicle Specific
  • Fit Type: Universal Fit
  • Quick grip handle protects hands from heat
  • Ideal heater for large or small (non-aluminum) engine blocks: tractors, snowmobiles, motorcycles, snow blowers, generators, farm equipment; Also oil pans, transmissions, hydraulic equipment, steel gutters and stock tanks
  • 200 watts, 120 Volts AC; built-in thermostat maintains optimum temperature - will not exceed 250˚F (121˚c)
  • Provides heat where and when you need it
  • Multi-use utility heater with built-in thermostat that maintains optimum temperature on any metallic surface
  • Order New Number 1155X
  • Convenient, reliable with no mechanical installation
  • May also be used for warming hydraulic systems or thawing frozen gutters, livestock feeders, locks, and pipes
  • Applications can include oil pan, engine block, battery holder or intake manifold
  • Uses include snow blowers, chainsaws, snowmobiles, or other small engines
  • Thread Size: 0.75in NPT
  • 120 Volts/1000 Watts
  • For Ford, Mercury, Lincoln, International, Caterpillar, Detroit Diesel, Hino, Mack, Nissan
  • CSA Approved
  • Ensure quick winter starts and reduce engine wear

More Info

KIM HOTSTART ENGINE HEATER TPS101GT8-000 COOLANT PRE-HEATER - Original - 1 YEAR WARRANTY

Search only HOTSTART ENGINE HEATER brand name
KIM HOTSTART ENGINE HEATER TPS101GT8-000 COOLANT PRE-HEATER - Original - 1 YEAR WARRANTY

Current price: 126.99 USD


Check price and availability


  • All parts are field replaceable — Not a throw - away design.
  • Greatly reduced heat loss for more efficient operation.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Vibration and shock tested. Incoloy element for longer service life.
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • [Built to Last] Silicone coating resists oil, acid, and water, and adds strength and longevity to these large under tank heating pads; Caution – Extremely hot, use thermostat (not included) to regulate temperature
  • [Easy to Install] Designed to mount on your engine oil reservoir, fuel tank, transmission pan, and more; Clean application surface, peel off paper backing then attach the pad; Plug the 2-prong power cord into any wall outlet and allow to heat for 10 to 15 minutes
  • [Fit Your Application] 4 by 5-inch (10.2 x 12.7cm) silicone car engine heater pad is rated at 120 volts and produces up to 150 watts; 72-inch (183cm) power cord ensures maximum reach; Recommended for metal surfaces only; Not designed for personal use or on plastic
  • [Improve Oil Flow] When plugged in, the engine block warmer oil pan heat pad continuously and evenly heats any metal surface to encourage proper lubrication and efficiency; This reduces wear resulting in increased engine and transmission life
  • [Warm your Engine Quickly] On cold winter days, ensure your engine and transmissions fluids are circulating efficiently by using the ABN 4 x 5 Inch Silicone Engine Block Heater Oil Pan Heating Pad
  • Order New Number 24150X
  • Use as an oil or transmission pan heater
  • Thermostatically controlled
  • Universal applications
  • Silicone covered for oil and acid resistance
  • 300W Magnetic Heater CSA
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Engine Displacement: 350 CID (5.7 L)
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Fit type: Vehicle Specific
  • Fit Type: Universal Fit
  • Quick grip handle protects hands from heat
  • Ideal heater for large or small (non-aluminum) engine blocks: tractors, snowmobiles, motorcycles, snow blowers, generators, farm equipment; Also oil pans, transmissions, hydraulic equipment, steel gutters and stock tanks
  • 200 watts, 120 Volts AC; built-in thermostat maintains optimum temperature - will not exceed 250˚F (121˚c)
  • Provides heat where and when you need it
  • Multi-use utility heater with built-in thermostat that maintains optimum temperature on any metallic surface
  • Order New Number 1155X
  • Convenient, reliable with no mechanical installation
  • May also be used for warming hydraulic systems or thawing frozen gutters, livestock feeders, locks, and pipes
  • Applications can include oil pan, engine block, battery holder or intake manifold
  • Uses include snow blowers, chainsaws, snowmobiles, or other small engines
  • Thread Size: 0.75in NPT
  • 120 Volts/1000 Watts
  • For Ford, Mercury, Lincoln, International, Caterpillar, Detroit Diesel, Hino, Mack, Nissan
  • CSA Approved
  • Ensure quick winter starts and reduce engine wear
  • Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
  • Volts: 120v - kW: 1 - AMPS: 8.4 - 60Hz
  • Engine Displacement: 350 CID (5.7 L)
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle)
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks marine and industrial applications

More Info

1    2    3    4    5    6    7    8    9    10