Best Epoxy Adhesives. Reviews August, 2020

Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined),Clear

Search only Bob Smith Industries brand name
Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined),Clear

Current price: 13.59 USD


Check price and availability


Height: 3.93700787 Inches

Length: 1.574803148 Inches

Width: 1.574803148 Inches

Weight: 0.45 Pounds

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA

More Info

Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 1)

Search only Gorilla brand name
Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 1)

Current price: 4.97 USD


Check price and availability


Height: 8.69 Inches

Length: 1.13 Inches

Width: 3.38 Inches

Weight: 0.14 Pounds

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications

More Info

PC Products 167779 PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 1 lb in Two Cans, Charcoal Gray

Search only PC Products brand name
PC Products 167779 PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 1 lb in Two Cans, Charcoal Gray

Current price: 12.7 USD

Saving: $4.29 (25%)


Check price and availability


Height: 2.99999999694 Inches

Length: 5.749999994135 Inches

Width: 2.99999999694 Inches

Weight: 0.1 Pounds

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications

More Info

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

Search only J-B Weld brand name
J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

Current price: 4.84 USD

Saving: $2.05 (30%)


Check price and availability


Height: 8 Inches

Length: 0.3 Inches

Width: 5 Inches

Weight: 0.02 Pounds

Warranty: Please Contact Seller for Product Warranty Information.

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Tensile strength is 3,960 PSI
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Will set in 4-6 hours, and cure in 16-24 hours
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.

More Info

PC Products PC-Clear Epoxy Adhesive Liquid, 1oz Double Syringe, Clear 70147

Search only PC Products brand name
PC Products PC-Clear Epoxy Adhesive Liquid, 1oz Double Syringe, Clear 70147

Current price: 3.17 USD

Saving: $2.82 (47%)


Check price and availability


Height: 0.99999999898 Inches

Length: 8.25196849552 Inches

Width: 3.75196850011 Inches

Weight: 0.1 Pounds

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Tensile strength is 3,960 PSI
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Will set in 4-6 hours, and cure in 16-24 hours
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • Forms tough bond for durability
  • Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
  • Continuous service temperature range from -20 to +200 degrees F
  • When mixed it turns opaque initially then clear to full cure to blend in with bonded material
  • Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric

More Info

Araldite Heavy Duty Epoxy Adhesive | Ultra Strong 2-Part Epoxy Glue | Solvent-Free Professional Grade Strength for All Materials | Slow Cure for Bonding and Repairing | Standard, 2 x 15ml

Search only Araldite brand name
Araldite Heavy Duty Epoxy Adhesive | Ultra Strong 2-Part Epoxy Glue | Solvent-Free Professional Grade Strength for All Materials | Slow Cure for Bonding and Repairing | Standard, 2 x 15ml

Current price: 10.26 USD

Saving: $1.57 (13%)


Check price and availability


Height: 4 Inches

Length: 1 Inches

Width: 3 Inches

Weight: 0.084437046346 Pounds

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Tensile strength is 3,960 PSI
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Will set in 4-6 hours, and cure in 16-24 hours
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • Forms tough bond for durability
  • Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
  • Continuous service temperature range from -20 to +200 degrees F
  • When mixed it turns opaque initially then clear to full cure to blend in with bonded material
  • Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
  • WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix; allows for no mess storage; for best results apply to clean and slightly rough surfaces; 15ml
  • STRONG AND DURABLE: Provides a strong bond that sets clear; can be sanded and painted after bonding or repair; water, oil, chemical and impact resistant; high temperature resistance (-30 to 65 degree Celsius)
  • MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE)
  • SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments; effectively reposition pieces for up to 80 minutes; glue obtains full strength in 14 hours
  • PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive; solvent-free 2-component epoxy ; 80 minute working time

More Info

EPOXY ADHESIVE 8.6OZ MIRACLEBOND

Search only Miracle Bond brand name
EPOXY ADHESIVE 8.6OZ MIRACLEBOND

Current price: 18.95 USD

Saving: $18.04 (49%)


Check price and availability


Height: 2 Inches

Length: 3 Inches

Width: 1 Inches

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Tensile strength is 3,960 PSI
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Will set in 4-6 hours, and cure in 16-24 hours
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • Forms tough bond for durability
  • Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
  • Continuous service temperature range from -20 to +200 degrees F
  • When mixed it turns opaque initially then clear to full cure to blend in with bonded material
  • Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
  • WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix; allows for no mess storage; for best results apply to clean and slightly rough surfaces; 15ml
  • STRONG AND DURABLE: Provides a strong bond that sets clear; can be sanded and painted after bonding or repair; water, oil, chemical and impact resistant; high temperature resistance (-30 to 65 degree Celsius)
  • MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE)
  • SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments; effectively reposition pieces for up to 80 minutes; glue obtains full strength in 14 hours
  • PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive; solvent-free 2-component epoxy ; 80 minute working time
  • Country Of Origin: China
  • Bonding Fresh Concrete To Hardened Concrete
  • Repairing Rotted Wood
  • Repairing Holes And Spalls In Concrete

More Info

Epoxy Adhesive C-Tough by CECCORP is a 8.5 oz two part high performance extremely tough/flexible epoxy glue provides superb adhesion to substrates such as metals,glass,fiberglass,masonry,wood,stones

Search only C-Tough brand name
Epoxy Adhesive C-Tough by CECCORP is a 8.5 oz two part high performance extremely tough/flexible epoxy glue provides superb adhesion to substrates such as metals,glass,fiberglass,masonry,wood,stones

Current price: 19.99 USD


Check price and availability


  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Tensile strength is 3,960 PSI
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Will set in 4-6 hours, and cure in 16-24 hours
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • Forms tough bond for durability
  • Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
  • Continuous service temperature range from -20 to +200 degrees F
  • When mixed it turns opaque initially then clear to full cure to blend in with bonded material
  • Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
  • WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix; allows for no mess storage; for best results apply to clean and slightly rough surfaces; 15ml
  • STRONG AND DURABLE: Provides a strong bond that sets clear; can be sanded and painted after bonding or repair; water, oil, chemical and impact resistant; high temperature resistance (-30 to 65 degree Celsius)
  • MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE)
  • SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments; effectively reposition pieces for up to 80 minutes; glue obtains full strength in 14 hours
  • PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive; solvent-free 2-component epoxy ; 80 minute working time
  • Country Of Origin: China
  • Bonding Fresh Concrete To Hardened Concrete
  • Repairing Rotted Wood
  • Repairing Holes And Spalls In Concrete
  • Flexible and tough structural bonding
  • Bow making
  • Assembling metal, plastic and wood parts
  • Boat and canoe building
  • knife making and repair

More Info

PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two Cans, Off White 80115

Search only PC Products brand name
PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1/2lb in Two Cans, Off White 80115

Current price: 9.97 USD


Check price and availability


Height: 2.49999999745 Inches

Length: 4.749999995155 Inches

Width: 2.49999999745 Inches

Weight: 0.6998801968254 Pounds

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Tensile strength is 3,960 PSI
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Will set in 4-6 hours, and cure in 16-24 hours
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • Forms tough bond for durability
  • Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
  • Continuous service temperature range from -20 to +200 degrees F
  • When mixed it turns opaque initially then clear to full cure to blend in with bonded material
  • Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
  • WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix; allows for no mess storage; for best results apply to clean and slightly rough surfaces; 15ml
  • STRONG AND DURABLE: Provides a strong bond that sets clear; can be sanded and painted after bonding or repair; water, oil, chemical and impact resistant; high temperature resistance (-30 to 65 degree Celsius)
  • MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE)
  • SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments; effectively reposition pieces for up to 80 minutes; glue obtains full strength in 14 hours
  • PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive; solvent-free 2-component epoxy ; 80 minute working time
  • Country Of Origin: China
  • Bonding Fresh Concrete To Hardened Concrete
  • Repairing Rotted Wood
  • Repairing Holes And Spalls In Concrete
  • Flexible and tough structural bonding
  • Bow making
  • Assembling metal, plastic and wood parts
  • Boat and canoe building
  • knife making and repair
  • Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water
  • High-tack paste can be used in vertical and overhead applications
  • Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
  • Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
  • Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments

More Info

Epoxy Resin, 0.85-Fluid Ounce Metal Epoxy Adhesives, High Viscosity and Strong Epoxies Multi-Purpose Epoxy Glue Instant Repair Wood, Plastic, Glass (H-Type)

Search only Yanyi brand name
Epoxy Resin, 0.85-Fluid Ounce Metal Epoxy Adhesives, High Viscosity and Strong Epoxies Multi-Purpose Epoxy Glue Instant Repair Wood, Plastic, Glass (H-Type)

Current price: 9.39 USD


Check price and availability


Height: 2.9527559025 Inches

Length: 6.1023621985 Inches

Width: 1.6535433054 Inches

Weight: 0.1 Kilograms

  • Proud Sponsors of Wounded Warrior Project
  • Handle parts in ten minutes
  • Five minute working time
  • Made in the USA
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Dries Clear; Ideal for clean, easy finishing
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Note: PC-7 will not bond to wax paper, Teflon, Polyethylene and some other plastics. Test a small area when in doubt.
  • PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt and fresh water.
  • High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.
  • PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.
  • Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F
  • Fills holes, castings, and molds
  • Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
  • Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
  • Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Tensile strength is 3,960 PSI
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Will set in 4-6 hours, and cure in 16-24 hours
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • Forms tough bond for durability
  • Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
  • Continuous service temperature range from -20 to +200 degrees F
  • When mixed it turns opaque initially then clear to full cure to blend in with bonded material
  • Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
  • WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix; allows for no mess storage; for best results apply to clean and slightly rough surfaces; 15ml
  • STRONG AND DURABLE: Provides a strong bond that sets clear; can be sanded and painted after bonding or repair; water, oil, chemical and impact resistant; high temperature resistance (-30 to 65 degree Celsius)
  • MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE)
  • SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments; effectively reposition pieces for up to 80 minutes; glue obtains full strength in 14 hours
  • PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive; solvent-free 2-component epoxy ; 80 minute working time
  • Country Of Origin: China
  • Bonding Fresh Concrete To Hardened Concrete
  • Repairing Rotted Wood
  • Repairing Holes And Spalls In Concrete
  • Flexible and tough structural bonding
  • Bow making
  • Assembling metal, plastic and wood parts
  • Boat and canoe building
  • knife making and repair
  • Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water
  • High-tack paste can be used in vertical and overhead applications
  • Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
  • Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
  • Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
  • ✔Nature friendly product formulation plus nature-friendly packaging for easy recycling.
  • ✔Fill voids and bond uneven and vertical surfaces to form a dense surface without air bubbles.
  • ✔Multi-purpose quality repairs including hard plastic, metal, fiberglass, wood, ceramic, ect.
  • ✔High-strength bonding, repair lasts for a long time, light and easy to apply, repeatable.
  • ✔5 minutes working time, 24 hours curing time, waterproof, sandable, paintable.

More Info

1    2    3    4    5    6    7    8    9    10