Best Exhaust . Reviews December, 2020

3 Inches OD DIY Custom Exhaust Pipe Kit 16-Piecese Straight & 45/90 Degree & U-Bends

Search only Auto Dynasty brand name
3 Inches OD DIY Custom Exhaust Pipe Kit 16-Piecese Straight & 45/90 Degree & U-Bends

Current price: 162.88 USD


Check price and availability


  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation

More Info

Truck Exhaust Kits - Shop Line dual exhaust system 2.5" Aluminized pipe Flowmaster Super 44 Muffler 2.5" With Slash Cut Chrome Tips and Corner Exit for Silverado, Sierra, F-Series,& Ram

Search only Truck Exhaust Kits brand name
Truck Exhaust Kits - Shop Line dual exhaust system 2.5

Current price: 284.99 USD


Check price and availability


Height: 9 Inches

Length: 48 Inches

Width: 20 Inches

Weight: 100 Kilograms

  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.

More Info

2 pcs 2.5" Electric Exhaust Cutout Valve Catback Y Pipe with One Controller Remote Kit

Search only smileracing brand name
2 pcs 2.5

Current price: 129.99 USD


Check price and availability


  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.

More Info

Glasspack Mandrel-Bent Dual Truck Exhaust Kit with Chrome Tips

Search only Magnum Exhaust brand name
Glasspack Mandrel-Bent Dual Truck Exhaust Kit with Chrome Tips

Current price: 199.99 USD


Check price and availability


  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.
  • Multi-depth insulated hangers & muffler clamps
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler

More Info

XsvFLO Exhaust Kits - Shopline Single exhaust system 3in AL pipe Flowmaster 40 series

Search only Truck Exhaust Kits brand name
XsvFLO Exhaust Kits - Shopline Single exhaust system 3in AL pipe Flowmaster 40 series

Current price: 159.99 USD


Check price and availability


Height: 9 Inches

Length: 48 Inches

Width: 20 Inches

Weight: 65 Pounds

  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.
  • Multi-depth insulated hangers & muffler clamps
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler
  • F150 2004-2014
  • Aluminized mandrel bent for longer life
  • upgraded 3in tubing for better flow
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.

More Info

XsvFLO Exhaust Kits - Shopline Single Exhaust System 3in AL pipe Flowmaster 40 Series 3" For Silverado, Sierra, F-Series,& Ram

Search only Truck Exhaust Kits brand name
XsvFLO Exhaust Kits - Shopline Single Exhaust System 3in AL pipe Flowmaster 40 Series 3

Current price: 184.99 USD


Check price and availability


Height: 9 Inches

Length: 48 Inches

Width: 20 Inches

  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.
  • Multi-depth insulated hangers & muffler clamps
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler
  • F150 2004-2014
  • Aluminized mandrel bent for longer life
  • upgraded 3in tubing for better flow
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • Aluminized mandrel bent for longer life
  • Side Exit Tail Pipe
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.

More Info

2” Custom Exhaust Kit 16PCS Mild Steel Tubing Mandrel Bend Pipe Straight & U-Bend Universal 2'' Inch OD

Search only YOLANDO brand name
2” Custom Exhaust Kit 16PCS Mild Steel Tubing Mandrel Bend Pipe Straight & U-Bend Universal 2'' Inch OD

Current price: 119.88 USD


Check price and availability


  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.
  • Multi-depth insulated hangers & muffler clamps
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler
  • F150 2004-2014
  • Aluminized mandrel bent for longer life
  • upgraded 3in tubing for better flow
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • Aluminized mandrel bent for longer life
  • Side Exit Tail Pipe
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY.
  • Each 2" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation
  • 4 X 40" Straight Pipes, 4 X 90 Degree Pipes, 4 X 45 Degree Pipes, 4 X 180 Degree U-Bends
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit, Dimensions Please Refer Pictures
  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls

More Info

BORLA 140686 Exhaust System

Search only Borla brand name
BORLA 140686 Exhaust System

Current price: 1223.81 USD


Check price and availability


Height: 9.99 Inches

Length: 9.99 Inches

Width: 9.99 Inches

Weight: 58 Pounds

  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.
  • Multi-depth insulated hangers & muffler clamps
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler
  • F150 2004-2014
  • Aluminized mandrel bent for longer life
  • upgraded 3in tubing for better flow
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • Aluminized mandrel bent for longer life
  • Side Exit Tail Pipe
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY.
  • Each 2" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation
  • 4 X 40" Straight Pipes, 4 X 90 Degree Pipes, 4 X 45 Degree Pipes, 4 X 180 Degree U-Bends
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit, Dimensions Please Refer Pictures
  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls
  • Borla 140686

More Info

3" Electric Exhaust Catback Cutout Valve Y Pipe E-Cut Out Valve System Controller Remote Kit

Search only smileracing brand name
3

Current price: 63.99 USD


Check price and availability


  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.
  • Multi-depth insulated hangers & muffler clamps
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler
  • F150 2004-2014
  • Aluminized mandrel bent for longer life
  • upgraded 3in tubing for better flow
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • Aluminized mandrel bent for longer life
  • Side Exit Tail Pipe
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY.
  • Each 2" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation
  • 4 X 40" Straight Pipes, 4 X 90 Degree Pipes, 4 X 45 Degree Pipes, 4 X 180 Degree U-Bends
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit, Dimensions Please Refer Pictures
  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls
  • Borla 140686

More Info

2007-2018 Wrangler JK Axle-Back Exhaust Kit

Search only ETL brand name
2007-2018 Wrangler JK Axle-Back Exhaust Kit

Current price: 200.87 USD

Saving: $60.11 (23%)


Check price and availability


  • 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD
  • Slip Fit Joints to Provide Easiest Fabrication
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation
  • Corner Exit Adapters
  • 2.5" Slash cut weld on 18" Chrome Tips x2
  • Aluminized mandrel bent for longer life
  • Rear Exit Tail Pipes
  • Flowmaster Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers.
  • Multi-depth insulated hangers & muffler clamps
  • Two 3.5"x18" WELD-ON angle-cut chrome tips
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged
  • single 3" inlet/dual 2.5" outlet Glasspack Muffler
  • F150 2004-2014
  • Aluminized mandrel bent for longer life
  • upgraded 3in tubing for better flow
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • Aluminized mandrel bent for longer life
  • Side Exit Tail Pipe
  • Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY.
  • Each 2" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation
  • 4 X 40" Straight Pipes, 4 X 90 Degree Pipes, 4 X 45 Degree Pipes, 4 X 180 Degree U-Bends
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit, Dimensions Please Refer Pictures
  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls
  • Borla 140686
  • https://www.youtube.com/watch?v=VlXQ3WEcY_s
  • Bolt on installation
  • Increase Horsepower and exhaust flow
  • Axle-Back Exhaust Kit
  • 2007-2018 Wrangler JK Exhaust

More Info

1    2    3    4    5    6    7    8    9    10