Best Expansion Reamers. Super-Tool brand. New releases 2021

11/32" Expansion Reamer, Carbide Tipped, Straight Shank, 56002, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
11/32

Current price: 62.15 USD


Check price and availability


Height: 0.34 Inches

Length: 6 Inches

Width: 0.34 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

1" Expansion Reamer, Carbide Tipped, Straight Shank, 56021, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
1

Current price: 102.25 USD


Check price and availability


Height: 1 Inches

Length: 10.5 Inches

Width: 1 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

1 5/16" Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
1 5/16

Current price: 89.4 USD


Check price and availability


Height: 1.31 Inches

Length: 11.5 Inches

Width: 1.31 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

1 1/32" Expansion Reamer, Carbide Tipped, Straight Shank, 56048, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
1 1/32

Current price: 112.05 USD


Check price and availability


Height: 1.03 Inches

Length: 10.5 Inches

Width: 1.03 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

1 3/32" Expansion Reamer, Carbide Tipped, Straight Shank, 56049, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
1 3/32

Current price: 112.05 USD


Check price and availability


Height: 1.09 Inches

Length: 11 Inches

Width: 1.09 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 3/4 " flute length
  • 11" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

31/32" Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
31/32

Current price: 102.25 USD


Check price and availability


Height: 0.96 Inches

Length: 10 Inches

Width: 0.96 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 3/4 " flute length
  • 11" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

15/16" Expansion Reamer, Carbide Tipped, Straight Shank, 56019, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
15/16

Current price: 98.4 USD


Check price and availability


Height: 0.93 Inches

Length: 10 Inches

Width: 0.93 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 3/4 " flute length
  • 11" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

29/32" Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
29/32

Current price: 98.4 USD


Check price and availability


Height: 0.9 Inches

Length: 10 Inches

Width: 0.9 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 3/4 " flute length
  • 11" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

1 1/16" Expansion Reamer, Carbide Tipped, Straight Shank, 56023, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
1 1/16

Current price: 112.05 USD


Check price and availability


Height: 1.06 Inches

Length: 10.5 Inches

Width: 1.06 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 3/4 " flute length
  • 11" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

13/16" Expansion Reamer, Carbide Tipped, Straight Shank, 56015, USA Made

More from Industrial & Scientific
Search only Super Tool brand name
13/16

Current price: 85.7 USD


Check price and availability


Height: 0.81 Inches

Length: 9.5 Inches

Width: 0.81 Inches

  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 9/32" shank diameter, For Reaming abrasive material
  • 1" flute length
  • 6" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • Morse taper shank #4, For Reaming Abrasive Material
  • 1 7/8 " flute length, Partial Flute Length Carbide
  • 11 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 3/4 " flute length
  • 11" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 3/4 " shank diameter, For Reaming abrasive material
  • 1 1/2 " flute length
  • 10" overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 7/8 " shank diameter, For Reaming abrasive material
  • 1 5/8 " flute length
  • 10 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
  • 5/8 " shank diameter, For Reaming abrasive material
  • 1 3/8 " flute length
  • 9 1/2 " overall length
  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

More Info

1    2    3    4    5    6    7    8