High quality Expansion Reamers. Reviews January, 2021, page 3

17/32" Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56056P, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

17/32

Current price: 43.89 USD

Check price and availability

Height: 0.53 Inches

Length: 8 Inches

Width: 0.53 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

15/16" Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

15/16

Current price: 63.27 USD

Check price and availability

Height: 0.93 Inches

Length: 10 Inches

Width: 0.93 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

5/16" Expansion Reamer, Carbide Tipped, Straight Shank, 56001, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

5/16

Current price: 62.15 USD

Check price and availability

Height: 0.31 Inches

Length: 6 Inches

Width: 0.31 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

1/2" Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

1/2

Current price: 65.55 USD

Check price and availability

Height: 0.5 Inches

Length: 8 Inches

Width: 0.5 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
7/16" shank diameter, For Reaming abrasive material
1" flute length
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

15/32" Expansion Reamer, Carbide Tipped, Straight Shank, 56036, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

15/32

Current price: 65.55 USD

Check price and availability

Height: 0.46 Inches

Length: 7 Inches

Width: 0.46 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
7/16" shank diameter, For Reaming abrasive material
1" flute length
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
3/8 " shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

13/32" Expansion Reamer, Carbide Tipped, Straight Shank, 56035, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

13/32

Current price: 61.85 USD

Check price and availability

Height: 0.4 Inches

Length: 7 Inches

Width: 0.4 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
7/16" shank diameter, For Reaming abrasive material
1" flute length
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
3/8 " shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

9/16" Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56057P, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

9/16

Current price: 43.89 USD

Check price and availability

Height: 0.56 Inches

Length: 8 Inches

Width: 0.56 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
7/16" shank diameter, For Reaming abrasive material
1" flute length
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
3/8 " shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1 1/8 " flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

3/8" Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

More from Industrial & Scientific
Search only Super Tool brand name

3/8

Current price: 58.25 USD

Check price and availability

Height: 0.37 Inches

Length: 7 Inches

Width: 0.37 Inches

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
7/16" shank diameter, For Reaming abrasive material
1" flute length
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
3/8 " shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1 1/8 " flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.

Reamer, Expansion Reamer, 0.3750 In

More from Industrial & Scientific
Search only Generic brand name

Reamer, Expansion Reamer, 0.3750 In

Current price: 298.98 USD

Check price and availability

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
7/16" shank diameter, For Reaming abrasive material
1" flute length
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
3/8 " shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1 1/8 " flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
Material - Machining: High Speed Steel
Cutting Direction: Right Hand
Dimension Type: Fractional Inch
Shank Dia.: 5/16 in
Overall Length: 7 in

Thenice Hip-Hop Punk Rock Tribal Style Snails Ear Expansion Earrings Studs (Black No.3)

More from Industrial & Scientific
Search only Thenice brand name

Thenice Hip-Hop Punk Rock Tribal Style Snails Ear Expansion Earrings Studs (Black No.3)

Current price: 8.99 USD

Check price and availability

This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1" flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #3, For Reaming Abrasive Material
1 1/2 " flute length, Partial Flute Length Carbide
10" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
9/32" shank diameter, For Reaming abrasive material
1" flute length
6" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
7/16" shank diameter, For Reaming abrasive material
1" flute length
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
3/8 " shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
Morse taper shank #1, For Reaming Abrasive Material
1 1/8 " flute length, Partial Flute Length Carbide
8" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground.
5/16" shank diameter, For Reaming abrasive material
1" flute length
7" overall length
When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters.
Material - Machining: High Speed Steel
Cutting Direction: Right Hand
Dimension Type: Fractional Inch
Shank Dia.: 5/16 in
Overall Length: 7 in
1 pairs earrings
Needle crude 1.2 mm (16 Gauge)
Don't inflammation, not allergic

1 2 3 4 5 6 7 8 9 10