Best Finishing Hand Hones. Reviews November, 2020

Brush Research 06263 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.223 Remington (Pack of 1)

Search only Flex-Hone Tool brand name
Brush Research 06263 Rifle Chamber Flex-Hone, Silicon Carbide, 800 Grit, For 0.223 Remington (Pack of 1)

Current price: 28.78 USD


Check price and availability


Height: 1.5 Inches

Length: 9.9 Inches

Width: 1.5 Inches

  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber

More Info

Flex-Hone Tool - GB45812 Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-5/8" (118 mm) Diameter, 120 Grit Size

Search only Flex-Hone Tool brand name
Flex-Hone Tool - GB45812 Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 4-5/8

Current price: 36.38 USD


Check price and availability


  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring

More Info

Flex-Hone Tool - GBD31424 Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter, 240 Grit Size

Search only Flex-Hone Tool brand name
Flex-Hone Tool - GBD31424 Brush Research FLEX-HONE Cylinder Hone, GBD Series, Silicon Carbide Abrasive, 3-1/4

Current price: 42.97 USD

Saving: $5.15 (11%)


Check price and availability


  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring

More Info

Brush Research FLEX-HONE Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-5/8" (67 mm) Diameter, 240 Grit Size

Search only Flex-Hone Tool brand name
Brush Research FLEX-HONE Cylinder Hone, BC Series, Silicon Carbide Abrasive, 2-5/8

Current price: 24.19 USD


Check price and availability


  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring

More Info

Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)

Search only Flex-Hone Tool brand name
Brush Research Flex-Hone For Rotors, Medium Grit (Pack of 1)

Current price: 40.64 USD

Saving: $4.05 (9%)


Check price and availability


Height: 2 Inches

Length: 5.7 Inches

Width: 3.5 Inches

Weight: 0.3 Pounds

  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Medium grit
  • Flex-hone for rotors
  • Ideal for new and re-turned rotors and flywheels
  • Produces a non-directional pattern
  • Lowers harmonic vibrations

More Info

4" (101MM) Flex Hone 60 Grit Silicon Carbide Commercial Grade

Search only Flex-Hone brand name
4

Current price: 66.99 USD


Check price and availability


Weight: 2.2 Pounds

  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Medium grit
  • Flex-hone for rotors
  • Ideal for new and re-turned rotors and flywheels
  • Produces a non-directional pattern
  • Lowers harmonic vibrations
  • Self Centering, can be used with hand drill or drill press,
  • THIS TOOL HAS MORE GLOBULES and THE 13 1/2" LONG SHAFT for production, commercial engine honing.
  • Tool is labeled as 4.000" diameter, but is actually slightly larger to apply the required wall force for honing a 4" bore
  • 60 grit, For aggressive deburring or tube cleaning
  • This brand new sealed in package Commercial Version engine cylinder hone is for 3.685" to 4.075" BORES.

More Info

4 1/8" (105mm) Flex-Hone Cylinder Hone 60 grit silicon carbide

Search only PMD Products brand name
4 1/8

Current price: 39.99 USD


Check price and availability


Height: 4.13 Inches

Length: 16 Inches

Width: 4.13 Inches

Weight: 1.5 Pounds

  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Medium grit
  • Flex-hone for rotors
  • Ideal for new and re-turned rotors and flywheels
  • Produces a non-directional pattern
  • Lowers harmonic vibrations
  • Self Centering, can be used with hand drill or drill press,
  • THIS TOOL HAS MORE GLOBULES and THE 13 1/2" LONG SHAFT for production, commercial engine honing.
  • Tool is labeled as 4.000" diameter, but is actually slightly larger to apply the required wall force for honing a 4" bore
  • 60 grit, For aggressive deburring or tube cleaning
  • This brand new sealed in package Commercial Version engine cylinder hone is for 3.685" to 4.075" BORES.
  • Made in the U.S.A.
  • Use with 3/8" or 1/2" chuck portable drill or drill press
  • Bore Range 3.750"-4.125" 13-1/2" Overall Length
  • Perfect for aggressive cylinder wall clean up to remove scratches, severe wear patterns or roughly increase bore
  • 4-1/8" (105mm) diameter , 60 Grit Flex hone made of silicon carbide

More Info

Flex-Hone Cylinder Ball-Hone 90-95mm for Yamaha XT600 1984-1995

Search only Flex-Hone brand name
Flex-Hone Cylinder Ball-Hone 90-95mm for Yamaha XT600 1984-1995

Current price: 64.19 USD


Check price and availability


  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Medium grit
  • Flex-hone for rotors
  • Ideal for new and re-turned rotors and flywheels
  • Produces a non-directional pattern
  • Lowers harmonic vibrations
  • Self Centering, can be used with hand drill or drill press,
  • THIS TOOL HAS MORE GLOBULES and THE 13 1/2" LONG SHAFT for production, commercial engine honing.
  • Tool is labeled as 4.000" diameter, but is actually slightly larger to apply the required wall force for honing a 4" bore
  • 60 grit, For aggressive deburring or tube cleaning
  • This brand new sealed in package Commercial Version engine cylinder hone is for 3.685" to 4.075" BORES.
  • Made in the U.S.A.
  • Use with 3/8" or 1/2" chuck portable drill or drill press
  • Bore Range 3.750"-4.125" 13-1/2" Overall Length
  • Perfect for aggressive cylinder wall clean up to remove scratches, severe wear patterns or roughly increase bore
  • 4-1/8" (105mm) diameter , 60 Grit Flex hone made of silicon carbide
  • Several sizes available for optimal cylinder bore fitment.
  • Ball hone style features 320 grit globules of silicone carbide making it perfect for steel sleeved and Nikasil coated cylinders.
  • Fast and efficient deglazing and finish honing, providing a consistent cross-hatch pattern for oil retention and piston ring seating.

More Info

Flex-Hone Cylinder Ball-Hone 39-41mm for Suzuki JR50/R 1978-2006

Search only Flex-Hone brand name
Flex-Hone Cylinder Ball-Hone 39-41mm for Suzuki JR50/R 1978-2006

Current price: 36.48 USD


Check price and availability


  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Medium grit
  • Flex-hone for rotors
  • Ideal for new and re-turned rotors and flywheels
  • Produces a non-directional pattern
  • Lowers harmonic vibrations
  • Self Centering, can be used with hand drill or drill press,
  • THIS TOOL HAS MORE GLOBULES and THE 13 1/2" LONG SHAFT for production, commercial engine honing.
  • Tool is labeled as 4.000" diameter, but is actually slightly larger to apply the required wall force for honing a 4" bore
  • 60 grit, For aggressive deburring or tube cleaning
  • This brand new sealed in package Commercial Version engine cylinder hone is for 3.685" to 4.075" BORES.
  • Made in the U.S.A.
  • Use with 3/8" or 1/2" chuck portable drill or drill press
  • Bore Range 3.750"-4.125" 13-1/2" Overall Length
  • Perfect for aggressive cylinder wall clean up to remove scratches, severe wear patterns or roughly increase bore
  • 4-1/8" (105mm) diameter , 60 Grit Flex hone made of silicon carbide
  • Several sizes available for optimal cylinder bore fitment.
  • Ball hone style features 320 grit globules of silicone carbide making it perfect for steel sleeved and Nikasil coated cylinders.
  • Fast and efficient deglazing and finish honing, providing a consistent cross-hatch pattern for oil retention and piston ring seating.
  • Several sizes available for optimal cylinder bore fitment.
  • Ball hone style features 320 grit globules of silicone carbide making it perfect for steel sleeved and Nikasil coated cylinders.
  • Fast and efficient deglazing and finish honing, providing a consistent cross-hatch pattern for oil retention and piston ring seating.

More Info

3Pcs Diamond Sharpening Stone Kit Single Sided Polishing Hone Block Whetstone Hand Tool 120 400 1000 Grit 6.7x3 Inch

Search only Micro Traders brand name
3Pcs Diamond Sharpening Stone Kit Single Sided Polishing Hone Block Whetstone Hand Tool 120 400 1000 Grit 6.7x3 Inch

Current price: 13.99 USD


Check price and availability


Height: 0.393700787 Inches

Length: 8.267716527 Inches

Width: 4.724409444 Inches

  • For durable and reliable rifle and gun brushes, the flex hone tool is a clear choice
  • To maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential
  • 1-5/8-inches abrasive part
  • The result achieved with these Flex-Hones is a bright, wear-resistant finish that will improve the quality and feel of your rifle
  • Rifle and gun brushes allow you to remove any imperfections or machining marks left in your rifle's chamber
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Sizes from 4mm to 36 inches
  • Order by actual bore size, tool produced oversized
  • Use by hand or in CNC equipment
  • Self-centering, self-aligning, self-compensating for wear
  • Flexible abrasive cylinder hone for surface finishing and cross hole deburring
  • Medium grit
  • Flex-hone for rotors
  • Ideal for new and re-turned rotors and flywheels
  • Produces a non-directional pattern
  • Lowers harmonic vibrations
  • Self Centering, can be used with hand drill or drill press,
  • THIS TOOL HAS MORE GLOBULES and THE 13 1/2" LONG SHAFT for production, commercial engine honing.
  • Tool is labeled as 4.000" diameter, but is actually slightly larger to apply the required wall force for honing a 4" bore
  • 60 grit, For aggressive deburring or tube cleaning
  • This brand new sealed in package Commercial Version engine cylinder hone is for 3.685" to 4.075" BORES.
  • Made in the U.S.A.
  • Use with 3/8" or 1/2" chuck portable drill or drill press
  • Bore Range 3.750"-4.125" 13-1/2" Overall Length
  • Perfect for aggressive cylinder wall clean up to remove scratches, severe wear patterns or roughly increase bore
  • 4-1/8" (105mm) diameter , 60 Grit Flex hone made of silicon carbide
  • Several sizes available for optimal cylinder bore fitment.
  • Ball hone style features 320 grit globules of silicone carbide making it perfect for steel sleeved and Nikasil coated cylinders.
  • Fast and efficient deglazing and finish honing, providing a consistent cross-hatch pattern for oil retention and piston ring seating.
  • Several sizes available for optimal cylinder bore fitment.
  • Ball hone style features 320 grit globules of silicone carbide making it perfect for steel sleeved and Nikasil coated cylinders.
  • Fast and efficient deglazing and finish honing, providing a consistent cross-hatch pattern for oil retention and piston ring seating.
  • [Size]: 17x7.5cm/6.7"x3"
  • [Easy to use]: Apply gentle pressure and use with water or lapping fluid.
  • [Usage]: Used to grinding seal stone, jade, scorper and more.
  • [Multi-Granularity]: Includes 120, 400, 1000. Quick to polish and refine a edge of tool.
  • [Light and Thin]: Easy to control and use, 1.1mm/0.04inch in thickness, about 105g/pc.

More Info

1    2    3    4    5    6    7    8    9    10