Best Flooring Adhesives . Reviews August, 2020

ROBERTS 7350-1 Flooring Adhesive, 1 gallon, Off white

Search only Roberts brand name
ROBERTS 7350-1 Flooring Adhesive, 1 gallon, Off white

Current price: 33.1 USD

Saving: $4.87 (13%)


Check price and availability


Height: 7.75 Inches

Length: 7.75 Inches

Width: 7.75 Inches

Weight: 8.37 Pounds

  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring

More Info

QEP CO INC ROBERTS 1407-1 Multipurpose-Flooring-adhesives, 1 Gallon

Search only QEP CO INC ROBERTS brand name
QEP CO INC ROBERTS 1407-1 Multipurpose-Flooring-adhesives, 1 Gallon

Current price: 25.51 USD

Saving: $2.47 (9%)


Check price and availability


Height: 7.5 Inches

Length: 7.5 Inches

Width: 8.2 Inches

Weight: 8.87 Pounds

  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide

More Info

ROBERTS R6280-1 Flooring Adhesive, 1 Gallon, Milky White

Search only Roberts brand name
ROBERTS R6280-1 Flooring Adhesive, 1 Gallon, Milky White

Current price: 24.3 USD

Saving: $3.33 (12%)


Check price and availability


Height: 8 Inches

Length: 7.5 Inches

Width: 7.5 Inches

Weight: 8.9 Pounds

  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile

More Info

DriTac 5900 MegaBond - - Resilient Flooring Adhesive - Vinyl Tile/Plank/Cork/Others - 1-Gallon

Search only Dritac brand name
DriTac 5900 MegaBond - - Resilient Flooring Adhesive - Vinyl Tile/Plank/Cork/Others - 1-Gallon

Current price: 50.63 USD


Check price and availability


Weight: 10 Pounds

  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile
  • DriTac 5900 offers the highest caliber tack and peel strength in the industry
  • It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types
  • DriTac 5900 MegaBond is a premium grade, "green" resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage

More Info

Bostik's BEST Wood Flooring Adhesive 5 Gallon

Search only brand name
Bostik's BEST Wood Flooring Adhesive 5 Gallon

Current price: 233.39 USD


Check price and availability


  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile
  • DriTac 5900 offers the highest caliber tack and peel strength in the industry
  • It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types
  • DriTac 5900 MegaBond is a premium grade, "green" resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage
  • 5 Gallon Size
  • BOSTIK’S BEST wood floor adhesive may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl and ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.
  • BOSTIK’S BEST wood floor adhesive may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications.
  • BOSTIK’S BEST wood floor adhesive is a one-part, trowel applied, tacking,moisture-cure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik’s Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik’s Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts.

More Info

ROBERTS 1406-P Flooring-Adhesive-primers, 1 Pint Bottle, White

Search only Roberts brand name
ROBERTS 1406-P Flooring-Adhesive-primers, 1 Pint Bottle, White

Current price: 9.72 USD


Check price and availability


Height: 7.5 Inches

Length: 2.4 Inches

Width: 2.4 Inches

Weight: 1 Pounds

Warranty: One Year Limited Warranty

  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile
  • DriTac 5900 offers the highest caliber tack and peel strength in the industry
  • It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types
  • DriTac 5900 MegaBond is a premium grade, "green" resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage
  • 5 Gallon Size
  • BOSTIK’S BEST wood floor adhesive may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl and ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.
  • BOSTIK’S BEST wood floor adhesive may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications.
  • BOSTIK’S BEST wood floor adhesive is a one-part, trowel applied, tacking,moisture-cure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik’s Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik’s Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts.
  • Quick, flip-top applicator lid
  • Water resistant and odorless
  • Water based formula is zero VOC calculated, non-flammable and non-toxic
  • Offers a strong, long-lasting bond
  • For floated engineered wood and laminate flooring installations

More Info

Mannington MegaGlue Laminate & Floating Flooring Adhesive 16oz

Search only Mannington brand name
Mannington MegaGlue Laminate & Floating Flooring Adhesive 16oz

Current price: 17.78 USD


Check price and availability


Height: 9 Inches

Length: 2 Inches

Width: 2 Inches

Weight: 1.2 Pounds

  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile
  • DriTac 5900 offers the highest caliber tack and peel strength in the industry
  • It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types
  • DriTac 5900 MegaBond is a premium grade, "green" resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage
  • 5 Gallon Size
  • BOSTIK’S BEST wood floor adhesive may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl and ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.
  • BOSTIK’S BEST wood floor adhesive may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications.
  • BOSTIK’S BEST wood floor adhesive is a one-part, trowel applied, tacking,moisture-cure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik’s Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik’s Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts.
  • Quick, flip-top applicator lid
  • Water resistant and odorless
  • Water based formula is zero VOC calculated, non-flammable and non-toxic
  • Offers a strong, long-lasting bond
  • For floated engineered wood and laminate flooring installations
  • Coverage 100 SqFt
  • Adhesive PVAC-Based
  • Use For Gluing Tongue & Groove Boards

More Info

BOSTIK GREENFORCE 4 GAL Flooring Moisture Barrier Adhesive

Search only Bostik brand name
BOSTIK GREENFORCE 4 GAL Flooring Moisture Barrier Adhesive

Current price: 174.99 USD


Check price and availability


  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile
  • DriTac 5900 offers the highest caliber tack and peel strength in the industry
  • It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types
  • DriTac 5900 MegaBond is a premium grade, "green" resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage
  • 5 Gallon Size
  • BOSTIK’S BEST wood floor adhesive may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl and ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.
  • BOSTIK’S BEST wood floor adhesive may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications.
  • BOSTIK’S BEST wood floor adhesive is a one-part, trowel applied, tacking,moisture-cure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik’s Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik’s Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts.
  • Quick, flip-top applicator lid
  • Water resistant and odorless
  • Water based formula is zero VOC calculated, non-flammable and non-toxic
  • Offers a strong, long-lasting bond
  • For floated engineered wood and laminate flooring installations
  • Coverage 100 SqFt
  • Adhesive PVAC-Based
  • Use For Gluing Tongue & Groove Boards
  • ZERO VOC CONTENT / NO RESTRICTION ON HARDWOOD BOARD LENGTH OR WIDTH
  • ANTI-FRACTURE PERFORMANCE; CAN BRIDGE CRACKS UP TO 1/8 INCH
  • LIFETIME WARRANTY FOR UNLIMITED MOISTURE VAPOR PROTECTION / SUPERIOR BOND STRENGTH & GREEN GRAB
  • VERY EASY TO CLEAN BEFORE AND AFTER CURE
  • 2 IN 1 FLOORING ADHESIVE AND MOISTURE VAPOR CONTROL

More Info

Luxury Vinyl Floor Tiles by Lucida USA | Peel & Stick Adhesive Flooring for DIY Installation | 36 Wood-Look Planks | BaseCore | 54 Sq. Feet

Search only Lucida Surfaces brand name
Luxury Vinyl Floor Tiles by Lucida USA | Peel & Stick Adhesive Flooring for DIY Installation | 36 Wood-Look Planks | BaseCore | 54 Sq. Feet

Current price: 90.72 USD


Check price and availability


  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile
  • DriTac 5900 offers the highest caliber tack and peel strength in the industry
  • It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types
  • DriTac 5900 MegaBond is a premium grade, "green" resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage
  • 5 Gallon Size
  • BOSTIK’S BEST wood floor adhesive may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl and ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.
  • BOSTIK’S BEST wood floor adhesive may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications.
  • BOSTIK’S BEST wood floor adhesive is a one-part, trowel applied, tacking,moisture-cure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik’s Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik’s Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts.
  • Quick, flip-top applicator lid
  • Water resistant and odorless
  • Water based formula is zero VOC calculated, non-flammable and non-toxic
  • Offers a strong, long-lasting bond
  • For floated engineered wood and laminate flooring installations
  • Coverage 100 SqFt
  • Adhesive PVAC-Based
  • Use For Gluing Tongue & Groove Boards
  • ZERO VOC CONTENT / NO RESTRICTION ON HARDWOOD BOARD LENGTH OR WIDTH
  • ANTI-FRACTURE PERFORMANCE; CAN BRIDGE CRACKS UP TO 1/8 INCH
  • LIFETIME WARRANTY FOR UNLIMITED MOISTURE VAPOR PROTECTION / SUPERIOR BOND STRENGTH & GREEN GRAB
  • VERY EASY TO CLEAN BEFORE AND AFTER CURE
  • 2 IN 1 FLOORING ADHESIVE AND MOISTURE VAPOR CONTROL
  • EASY TO INSTALL Peel and stick down to practically any surface – home improvement made simple! Each tile measures 2 mm thick / 6” width x 36” length / 36 tiles per box / 54 square feet. 10 year warranty.
  • SCRATCH & ABRASION RESISTANT CoreBond glue binds our multi-layer system for long-lasting wear without the tear! Virgin premium core is topped with 12 mil wear layer, coated with 2X UV, and finished with urethane and ceramic bead for commercial-grade strength.
  • WATERPROOF & EASY CLEAN Super easy to clean, tiles are 100% waterproof and mildew resistant with an IXPE integrated sound reduction underlayment that does not absorb water.
  • WOOD-GRAIN TEXTURE Achieve the look and feel of natural wood flooring with Lucida’s DIY adhesive planks. Micro-bevel edges and HD film prints create the look of real wood floors.
  • LUXURY VINYL FLOOR TILES Lucida USA brings Peel & Stick flooring up a notch with BaseCore floor tiles – strong at the core, stylish at the surface with rigid core performance.

More Info

Firecore FS18375 3-inch Wide Machine Sharpened Tile & Flooring Adhesive Remover Bit, Impact Air Hammer Chisel 0.401 in Shank (3" x 7.5")

Search only Firecore brand name
Firecore FS18375 3-inch Wide Machine Sharpened Tile & Flooring Adhesive Remover Bit, Impact Air Hammer Chisel 0.401 in Shank (3

Current price: 21.99 USD

Saving: $6.00 (21%)


Check price and availability


Height: 0.8 Inches

Length: 7.5 Inches

Width: 3 Inches

  • Moisture control adhesive - up to 10 lbs. MVER and 90% RH
  • Rebondable pressure sensitive, aggressive bond, permanent tack
  • Suitable for indoor use
  • Bonds with most concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing well bonded vinyl tile flooring-excluding self-stick, radiant heated subfloors whose surface temperature does not exceed 85§F
  • Ideal for luxury vinyl tile (LVT), luxury vinyl plank (LVP), solid vinyl tile and wood plastic composite/waterproof core (WPC) flooring
  • Non-flammable for safe use
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Rated for heavy residential and moderate commercial traffic
  • For interior, direct bond installations
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Covers up to 300 sq. ft. per gallon when installing carpet tile using a medium nap roller
  • Covers approximately 170 to 190 sq. ft. per gallon when installing carpet tile, fiberglass vinyl sheet or luxury vinyl tile (LVT) when using a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • For heavy residential and moderate commercial use
  • Bonds with concrete, APA rated plywood and terrazzo
  • For the interior installation of vinyl backed carpet tile, commercial carpet cushion, solid vinyl, fiberglass reinforced sheet vinyl, luxury vinyl tile up to 12 in. x 12 in., recycled non-foam (PVC) and Enhancer backed carpet tile
  • DriTac 5900 offers the highest caliber tack and peel strength in the industry
  • It is a high moisture resistant adhesive that provides maximum bond strength for a wide array of flooring types
  • DriTac 5900 MegaBond is a premium grade, "green" resilient flooring adhesive that has been specially formulated to help minimize vinyl plank shrinkage
  • 5 Gallon Size
  • BOSTIK’S BEST wood floor adhesive may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board (underlayment grade), well bonded vinyl and ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.
  • BOSTIK’S BEST wood floor adhesive may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications.
  • BOSTIK’S BEST wood floor adhesive is a one-part, trowel applied, tacking,moisture-cure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik’s Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik’s Best elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts.
  • Quick, flip-top applicator lid
  • Water resistant and odorless
  • Water based formula is zero VOC calculated, non-flammable and non-toxic
  • Offers a strong, long-lasting bond
  • For floated engineered wood and laminate flooring installations
  • Coverage 100 SqFt
  • Adhesive PVAC-Based
  • Use For Gluing Tongue & Groove Boards
  • ZERO VOC CONTENT / NO RESTRICTION ON HARDWOOD BOARD LENGTH OR WIDTH
  • ANTI-FRACTURE PERFORMANCE; CAN BRIDGE CRACKS UP TO 1/8 INCH
  • LIFETIME WARRANTY FOR UNLIMITED MOISTURE VAPOR PROTECTION / SUPERIOR BOND STRENGTH & GREEN GRAB
  • VERY EASY TO CLEAN BEFORE AND AFTER CURE
  • 2 IN 1 FLOORING ADHESIVE AND MOISTURE VAPOR CONTROL
  • EASY TO INSTALL Peel and stick down to practically any surface – home improvement made simple! Each tile measures 2 mm thick / 6” width x 36” length / 36 tiles per box / 54 square feet. 10 year warranty.
  • SCRATCH & ABRASION RESISTANT CoreBond glue binds our multi-layer system for long-lasting wear without the tear! Virgin premium core is topped with 12 mil wear layer, coated with 2X UV, and finished with urethane and ceramic bead for commercial-grade strength.
  • WATERPROOF & EASY CLEAN Super easy to clean, tiles are 100% waterproof and mildew resistant with an IXPE integrated sound reduction underlayment that does not absorb water.
  • WOOD-GRAIN TEXTURE Achieve the look and feel of natural wood flooring with Lucida’s DIY adhesive planks. Micro-bevel edges and HD film prints create the look of real wood floors.
  • LUXURY VINYL FLOOR TILES Lucida USA brings Peel & Stick flooring up a notch with BaseCore floor tiles – strong at the core, stylish at the surface with rigid core performance.
  • Can be used as a grout removal tool, scaling chisel, adhesive remover, electric chisel for removes old tiles, stubborn thinset, glue, mortar and plaster
  • Widely used by professionals for home renovation and remodeling with Ingersoll Rand Air Hammer, IR Air, Milwaukee Air Hammer and Dewalt Air Tools
  • Extra wide 3 inch edge, 7.5 inch length to increase thinset removal efficiency
  • Crafted with Chromium-Molybdenum steel for excellent blade sharpness retention and chisel strength
  • Universal air hammer bit, compatible with standard air hammer(0.401 in shank)

More Info

1    2    3    4    5    6    7    8    9    10