Best Foot Controls. Reviews January, 2021

Kuryakyn 9643 Motorcycle Foot Control: Girder Extended Brake Pedal for 2014-19 Harley-Davidson Touring & Trike Motorcycles without Fairing Lowers, Gloss Black

Search only Kuryakyn brand name
Kuryakyn 9643 Motorcycle Foot Control: Girder Extended Brake Pedal for 2014-19 Harley-Davidson Touring & Trike Motorcycles without Fairing Lowers, Gloss Black

Current price: 107.99 USD


Check price and availability


Height: 4 Inches

Length: 18 Inches

Width: 6 Inches

Weight: 2.58 Pounds

Warranty: 1 year manufacturer

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing

More Info

TCMT Forward Control Foot Pegs Levers Linkage Fit Harley Sporster 883/1200 2004-2013

Search only TCMT brand name
TCMT Forward Control Foot Pegs Levers Linkage Fit Harley Sporster 883/1200 2004-2013

Current price: 138.99 USD


Check price and availability


  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.

More Info

Atwood (940200120) 24V Bow Mount Trolling Motor with Foot Control

Search only Atwood brand name
Atwood (940200120) 24V Bow Mount Trolling Motor with Foot Control

Current price: 759.45 USD


Check price and availability


Weight: 53 Pounds

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)

More Info

Miller 300432 RFCS-RJ45 Foot Control

Search only Miller brand name
Miller 300432 RFCS-RJ45 Foot Control

Current price: 218.99 USD


Check price and availability


Height: 1 Inches

Length: 6 Inches

Width: 1 Inches

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)

More Info

SSC Controls Touch 4 TIG Welding Remote Fingertip Torch Hand Control, 8 Pin Plug, ESAB or Thermal Arc Welders

Search only SSC Controls brand name
SSC Controls Touch 4 TIG Welding Remote Fingertip Torch Hand Control, 8 Pin Plug, ESAB or Thermal Arc Welders

Current price: 124 USD

Saving: $26.00 (17%)


Check price and availability


Height: 2 Inches

Length: 7 Inches

Width: 10 Inches

Weight: 2 Pounds

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)
  • Made in USA by SSC Controls Company.
  • 25-ft cable with 8-pin plug for ESAB TIG welders as listed below.
  • Preset the weld current on your machine to where you want the current to be for the job.
  • Press to activate gas contactor and increase amperage through four levels.
  • TIG welding hand control for ESAB welders (8 pin plug).

More Info

Firepower 1442-0025 Tig Foot Control, 15', 8-Pin

Search only ESAB brand name
Firepower 1442-0025 Tig Foot Control, 15', 8-Pin

Current price: 131.51 USD


Check price and availability


Weight: 4.76 Pounds

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)
  • Made in USA by SSC Controls Company.
  • 25-ft cable with 8-pin plug for ESAB TIG welders as listed below.
  • Preset the weld current on your machine to where you want the current to be for the job.
  • Press to activate gas contactor and increase amperage through four levels.
  • TIG welding hand control for ESAB welders (8 pin plug).
  • For use with many firepower systems
  • Proves on/off Contactor and amperage control for your firepower mst 140i, 180i and 220i systems
  • Comes with 15' Cable and 8 pin Amphenol plug

More Info

TC Bros. Universal Forward Controls with Mounting Kit

Search only TC Bros. brand name
TC Bros. Universal Forward Controls with Mounting Kit

Current price: 149.99 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 10 Pounds

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)
  • Made in USA by SSC Controls Company.
  • 25-ft cable with 8-pin plug for ESAB TIG welders as listed below.
  • Preset the weld current on your machine to where you want the current to be for the job.
  • Press to activate gas contactor and increase amperage through four levels.
  • TIG welding hand control for ESAB welders (8 pin plug).
  • For use with many firepower systems
  • Proves on/off Contactor and amperage control for your firepower mst 140i, 180i and 220i systems
  • Comes with 15' Cable and 8 pin Amphenol plug
  • New

More Info

Kuryakyn 8965 Motorcycle Foot Control: Mid Controls for 2015-19 Indian Scout Motorcycles, Black

Search only Kuryakyn brand name
Kuryakyn 8965 Motorcycle Foot Control: Mid Controls for 2015-19 Indian Scout Motorcycles, Black

Current price: 269.99 USD


Check price and availability


Weight: 9.5 Pounds

Warranty: 1 year manufacturer

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)
  • Made in USA by SSC Controls Company.
  • 25-ft cable with 8-pin plug for ESAB TIG welders as listed below.
  • Preset the weld current on your machine to where you want the current to be for the job.
  • Press to activate gas contactor and increase amperage through four levels.
  • TIG welding hand control for ESAB welders (8 pin plug).
  • For use with many firepower systems
  • Proves on/off Contactor and amperage control for your firepower mst 140i, 180i and 220i systems
  • Comes with 15' Cable and 8 pin Amphenol plug
  • New
  • Compatible with Indian motorcycle models: '15-'19 Scout (excludes Bobber)
  • Includes (1) left bracket, (1) right bracket, (1) right side rear brace, (2) footpegs, and (1) hardware kit; Suggested for installation (not included): metric hex bit set, metric socket set or combination wrench set, ft-lbs (Nm) torque wrench, blue and red loctite, and cable ties
  • Contructed with combination frame and engin mount kit with full steel, providing strength and durability
  • Relocates factory peg mounts, rear brake master cylinder, brake lever, and shift lever; Includes all neccessary hardware and componenets for installation
  • Mid controls relocate the stock, forward placement controls 15" back and 1" higher; Allows a more comfortable, aggressive riding position

More Info

SSC Controls C810-0625 TIG Welding Foot Pedal, 6-Pin Plug, 25-ft Cable, Miller Welders (Maxstar 150/161 STH, Made in USA

Search only SSC Controls brand name
SSC Controls C810-0625 TIG Welding Foot Pedal, 6-Pin Plug, 25-ft Cable, Miller Welders (Maxstar 150/161 STH, Made in USA

Current price: 178 USD


Check price and availability


Height: 3.7 Inches

Length: 8.8 Inches

Width: 5.5 Inches

Weight: 5.5 Pounds

  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)
  • Made in USA by SSC Controls Company.
  • 25-ft cable with 8-pin plug for ESAB TIG welders as listed below.
  • Preset the weld current on your machine to where you want the current to be for the job.
  • Press to activate gas contactor and increase amperage through four levels.
  • TIG welding hand control for ESAB welders (8 pin plug).
  • For use with many firepower systems
  • Proves on/off Contactor and amperage control for your firepower mst 140i, 180i and 220i systems
  • Comes with 15' Cable and 8 pin Amphenol plug
  • New
  • Compatible with Indian motorcycle models: '15-'19 Scout (excludes Bobber)
  • Includes (1) left bracket, (1) right bracket, (1) right side rear brace, (2) footpegs, and (1) hardware kit; Suggested for installation (not included): metric hex bit set, metric socket set or combination wrench set, ft-lbs (Nm) torque wrench, blue and red loctite, and cable ties
  • Contructed with combination frame and engin mount kit with full steel, providing strength and durability
  • Relocates factory peg mounts, rear brake master cylinder, brake lever, and shift lever; Includes all neccessary hardware and componenets for installation
  • Mid controls relocate the stock, forward placement controls 15" back and 1" higher; Allows a more comfortable, aggressive riding position
  • Made in USA by SSC Controls Company.
  • Press to activate gas contactor and increase amperage; release to turn off and activate afterflow.
  • Replaces RFCS-6M, 195183, 195504 weld foot control pedals.
  • 6-pin plug and 25-ft cable for Miller TIG welders.
  • TIG welding foot pedal with steel case and OEM quality components.

More Info

TCT-MT Forward Control Foot Pegs Kit Linkage Levers Fit Harley Sportster 883 1200 2004-2013; Sportster 1200 Nightster (XL1200N) 2007-2012 Black

Search only TCT-MOTORPARTS brand name
TCT-MT Forward Control Foot Pegs Kit Linkage Levers Fit Harley Sportster 883 1200 2004-2013; Sportster 1200 Nightster (XL1200N) 2007-2012 Black

Current price: 103.37 USD


Check price and availability


  • Compatible with Harley-Davidson models without Fairing Lowers: '14-'19 Electra Glides, Road Glides, Road Kings, Street Glides and Trikes
  • Includes (1) Gloss Black Extended Brake Pedal, (1) Cotter Pin; Suggested for installation (not Included): set of hex wrenches, set of hex bit sockets, set of sockets, set of combination wrenches, grease FT LBS (Nm) torque wrench, and needle nose pliers
  • Accepts a stock brake pedal pad as well as any custom brake pedal pad that is designed for the stock pedal
  • Longer than stock pedals place the pad location at a lower and flatter angle for easier operation
  • Features extended brake pedals for models without fairing
  • Package Included:Complete Kit Pegs Levers Linkage
  • These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware;You do not need to purchase anything else, just bolt them on.
  • Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.
  • country of origin :China
  • Package Weight : 44.0 lbs
  • Made in China
  • Package Dimensions : 20.32 L x 165.1 H x 59.055 W (cm)
  • Made in USA by SSC Controls Company.
  • 25-ft cable with 8-pin plug for ESAB TIG welders as listed below.
  • Preset the weld current on your machine to where you want the current to be for the job.
  • Press to activate gas contactor and increase amperage through four levels.
  • TIG welding hand control for ESAB welders (8 pin plug).
  • For use with many firepower systems
  • Proves on/off Contactor and amperage control for your firepower mst 140i, 180i and 220i systems
  • Comes with 15' Cable and 8 pin Amphenol plug
  • New
  • Compatible with Indian motorcycle models: '15-'19 Scout (excludes Bobber)
  • Includes (1) left bracket, (1) right bracket, (1) right side rear brace, (2) footpegs, and (1) hardware kit; Suggested for installation (not included): metric hex bit set, metric socket set or combination wrench set, ft-lbs (Nm) torque wrench, blue and red loctite, and cable ties
  • Contructed with combination frame and engin mount kit with full steel, providing strength and durability
  • Relocates factory peg mounts, rear brake master cylinder, brake lever, and shift lever; Includes all neccessary hardware and componenets for installation
  • Mid controls relocate the stock, forward placement controls 15" back and 1" higher; Allows a more comfortable, aggressive riding position
  • Made in USA by SSC Controls Company.
  • Press to activate gas contactor and increase amperage; release to turn off and activate afterflow.
  • Replaces RFCS-6M, 195183, 195504 weld foot control pedals.
  • 6-pin plug and 25-ft cable for Miller TIG welders.
  • TIG welding foot pedal with steel case and OEM quality components.
  • PACKAGE INCLUDED: Complete Kit Pegs Levers Linkage
  • Fitment: 2004 - 2013 Sportster 1200 Custom (XL1200C) , 2004 - 2008 Sportster 1200 Roadster (XL1200R) , 2006 - 2011 Sportster 1200 Low (XL1200L) , 2007 - 2012 Sportster 1200 Nightster (XL1200N) , 2010 - 2013 Sportster 1200 Forty-Eight (XL1200X), 2004 - 2008 Sportster 883 (XL883) , 2004 - 2009 Sportster 883 Custom (XL883C) , 2009 - 2013 Sportster 883 Iron (XL883N), 2005 - 2010 Sportster 883 Low(XL883L), 2011 - 2013 Sportster 883 Superlow(XL883L) , 2005 - 2007 Sportster 883R (XL883R).
  • You do not need to purchase anything else, just bolt them on. These controls will not work on cycles with an engine guard, 2-in-1 exhaust or crash bars.
  • Kit includes pegs, levers, linkage and hardware; Made from Aluminum + Steel + Rubber.Mounts easily to front motor mounts.
  • Condition:Aftermarket 100% Brand New; Complete assemblies for both brake and shifter sides.

More Info

1    2    3    4    5    6    7    8    9    10