Best Headphone Amps. Reviews August, 2020

Headphone Amplifier, Portable Headphone amp 3.5mm Stereo Audio Out, Powered Dual-Output with Lithium Battery and 2-Level Boost,Headphone Amplifier for iPhone, iPod, iPad,MP3,MP4 and Computers

Search only LVY brand name
Headphone Amplifier, Portable Headphone amp 3.5mm Stereo Audio Out, Powered Dual-Output with Lithium Battery and 2-Level Boost,Headphone Amplifier for iPhone, iPod, iPad,MP3,MP4 and Computers

Current price: 24.99 USD

Saving: $5.00 (17%)


Check price and availability


Height: 0.5 Inches

Length: 1.9 Inches

Width: 3.6 Inches

  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.

More Info

FX-Audio DAC-X6 Mini HiFi 2.0 Digital Audio Decoder DAC Input USB/Coaxial/Optical Output RCA/Headphone Amplifier 24Bit/96KHz DC12V (Black)

Search only KGUSS brand name
FX-Audio DAC-X6 Mini HiFi 2.0 Digital Audio Decoder DAC Input USB/Coaxial/Optical Output RCA/Headphone Amplifier 24Bit/96KHz DC12V (Black)

Current price: 64.99 USD


Check price and availability


  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs

More Info

FiiO A1 Silver Portable Headphone Amp A1

Search only FiiO brand name
FiiO A1 Silver Portable Headphone Amp A1

Current price: 27.99 USD


Check price and availability


Height: 1.65 Inches

Length: 0.37 Inches

Width: 1.57 Inches

Weight: 0.044375 Pounds

  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design

More Info

Creative Sound BlasterX G5 7.1 Headphone Surround HD Audio External Sound Card with Headphone Amplifier for Windows PC / Mac / PS4 / and Other Consoles

Search only Creative brand name
Creative Sound BlasterX G5 7.1 Headphone Surround HD Audio External Sound Card with Headphone Amplifier for Windows PC / Mac / PS4 / and Other Consoles

Current price: 99.99 USD


Check price and availability


Height: 5.83 Inches

Length: 6.18 Inches

Width: 1.72 Inches

Weight: 0.9 Pounds

  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design
  • Backlit Volume Control with Illuminated Volume Indicator
  • Built-in SB-Axx1 Audio Processor
  • Audiophile-grade Headphone Amplifier
  • Blaster Acoustic Engine Pro
  • Best-in-class Console Gaming Audio
  • Immersive 3D PC Gaming Audio
  • Native 7.1 Surround Sound Support

More Info

FiiO BTR5-384K/32Bit Native DSD256 Hi-Res CSR8675 Bluetooth5.0 Receiver/USB DAC/DSD Headphone Amp with LDAC, aptX HD, (3.5mm Unbalanced&2.5mm Balanced Output, Titanium)

Search only FiiO brand name
FiiO BTR5-384K/32Bit Native DSD256 Hi-Res CSR8675 Bluetooth5.0 Receiver/USB DAC/DSD Headphone Amp with LDAC, aptX HD, (3.5mm Unbalanced&2.5mm Balanced Output, Titanium)

Current price: 109.99 USD


Check price and availability


  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design
  • Backlit Volume Control with Illuminated Volume Indicator
  • Built-in SB-Axx1 Audio Processor
  • Audiophile-grade Headphone Amplifier
  • Blaster Acoustic Engine Pro
  • Best-in-class Console Gaming Audio
  • Immersive 3D PC Gaming Audio
  • Native 7.1 Surround Sound Support
  • FPGA precision clock management+OLED Displaying+9 hours battery life+2 microphones with cVC 8.0 noise cancellation
  • Can be remotely controlled via FiiO Music app to swtich channel balance,8 different DAC lowpass filter and 10-band EQ
  • For greater power and detail resolution,the BTR5 features both balanced 2.5mm and single-ended 3.5mm outpts.
  • CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
  • Including Hi-fi DACs(ES9218P*2) for extremely detailed reproduction of sound and Independent control chip Xmos XUF208 for the ultimate in decoding performance, supporting up to 384kHz and native DSD

More Info

4-Channel Portable Stereo Headphone Amplifier - Professional Multi Channel Mini Earphone Splitter Amp w/ 4 ¼” Balanced TRS Headphones Output Jack and 1/4" TRS Audio Input For Sound Mixer - Pyle PHA40

Search only Pyle brand name
4-Channel Portable Stereo Headphone Amplifier - Professional Multi Channel Mini Earphone Splitter Amp w/ 4 ¼” Balanced TRS Headphones Output Jack and 1/4

Current price: 16.06 USD


Check price and availability


Height: 5.8 Inches

Length: 4.3 Inches

Width: 2 Inches

Weight: 0.85 Pounds

Warranty: 1- YEAR

  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design
  • Backlit Volume Control with Illuminated Volume Indicator
  • Built-in SB-Axx1 Audio Processor
  • Audiophile-grade Headphone Amplifier
  • Blaster Acoustic Engine Pro
  • Best-in-class Console Gaming Audio
  • Immersive 3D PC Gaming Audio
  • Native 7.1 Surround Sound Support
  • FPGA precision clock management+OLED Displaying+9 hours battery life+2 microphones with cVC 8.0 noise cancellation
  • Can be remotely controlled via FiiO Music app to swtich channel balance,8 different DAC lowpass filter and 10-band EQ
  • For greater power and detail resolution,the BTR5 features both balanced 2.5mm and single-ended 3.5mm outpts.
  • CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
  • Including Hi-fi DACs(ES9218P*2) for extremely detailed reproduction of sound and Independent control chip Xmos XUF208 for the ultimate in decoding performance, supporting up to 384kHz and native DSD
  • COMPACT SIZE: The professional integrated headphone receiver features a mini compact size and measures 4.07” x 1.18” x 2.24”, easy to carry and use on the road. Perfect for both on-stage and in-studio performances or applications
  • SUPERIOR AUDIO QUALITY: The PHA40 contains 4 high powered stereo amps that maintain the highest sonic quality even at maximum volume levels. These ultra-low noise operational amplifiers are included for outstanding audio performance
  • ¼” TRS OUTPUT JACKS: This 4-channel headphones splitter is equipped w/ 4 ¼” stereo headphone TRS output connector jacks which allow you to control up to 4 headphones at once. Also equipped w/ ¼” TRS source input connector jack for your Pyle Pro mixer
  • INDEPENDENT VOLUME CONTROLS: Each listener can determine their own volume level using the dedicated output level controls. Features independent channel rotary volume knob control for each listener’s convenience. Also features a power ON LED indicator
  • POWERS 4 HEADPHONES: The Pyle Stereo Headphone Amplifier is a monitor distribution system that powers practically any headphones - up to four pairs at the same time. This allows four people in your studio to listen to the main mix while recording

More Info

Nobsound NS-08E Vacuum Tube Headphone Amplifier Hi-Fi Valve Headphone Amp Stereo Audio Preamplifier

Search only Nobsound brand name
Nobsound NS-08E Vacuum Tube Headphone Amplifier Hi-Fi Valve Headphone Amp Stereo Audio Preamplifier

Current price: 50 USD


Check price and availability


  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design
  • Backlit Volume Control with Illuminated Volume Indicator
  • Built-in SB-Axx1 Audio Processor
  • Audiophile-grade Headphone Amplifier
  • Blaster Acoustic Engine Pro
  • Best-in-class Console Gaming Audio
  • Immersive 3D PC Gaming Audio
  • Native 7.1 Surround Sound Support
  • FPGA precision clock management+OLED Displaying+9 hours battery life+2 microphones with cVC 8.0 noise cancellation
  • Can be remotely controlled via FiiO Music app to swtich channel balance,8 different DAC lowpass filter and 10-band EQ
  • For greater power and detail resolution,the BTR5 features both balanced 2.5mm and single-ended 3.5mm outpts.
  • CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
  • Including Hi-fi DACs(ES9218P*2) for extremely detailed reproduction of sound and Independent control chip Xmos XUF208 for the ultimate in decoding performance, supporting up to 384kHz and native DSD
  • COMPACT SIZE: The professional integrated headphone receiver features a mini compact size and measures 4.07” x 1.18” x 2.24”, easy to carry and use on the road. Perfect for both on-stage and in-studio performances or applications
  • SUPERIOR AUDIO QUALITY: The PHA40 contains 4 high powered stereo amps that maintain the highest sonic quality even at maximum volume levels. These ultra-low noise operational amplifiers are included for outstanding audio performance
  • ¼” TRS OUTPUT JACKS: This 4-channel headphones splitter is equipped w/ 4 ¼” stereo headphone TRS output connector jacks which allow you to control up to 4 headphones at once. Also equipped w/ ¼” TRS source input connector jack for your Pyle Pro mixer
  • INDEPENDENT VOLUME CONTROLS: Each listener can determine their own volume level using the dedicated output level controls. Features independent channel rotary volume knob control for each listener’s convenience. Also features a power ON LED indicator
  • POWERS 4 HEADPHONES: The Pyle Stereo Headphone Amplifier is a monitor distribution system that powers practically any headphones - up to four pairs at the same time. This allows four people in your studio to listen to the main mix while recording
  • CNC Aluminum shell with super mini size. Very solid workmanship. Prompt and courteous customer service.18-month warranty and life technical support. For any questions, please contact us on Amazon.
  • It can also be used as a stereo preamplifier for other amplifiers and active speakers. For better preamp function, we recommend NS-10P (ASIN: B07719G56B).
  • Upgrade circuit can ensure lower background noise, more powerful bass and more brilliant treble.
  • New version adopts 6J3 vacuum & valve tube, which has warmer tube sound and more replaceable tubes.
  • NS-08E is a Hi-Fi tube headphone amp. It can offer >=1100mW at 32Ω and can drive 18~600 ohm headphones & headsets.

More Info

PreSonus HP4 4-Channel Compact Headphone Amplifier

Search only PreSonus brand name
PreSonus HP4 4-Channel Compact Headphone Amplifier

Current price: 139.95 USD

Saving: $20.00 (13%)


Check price and availability


Height: 5.5 Inches

Length: 5.5 Inches

Width: 1.75 Inches

Weight: 3.2 Pounds

Warranty: One year from date of purchase from authorized dealer to original purchaser only.

  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design
  • Backlit Volume Control with Illuminated Volume Indicator
  • Built-in SB-Axx1 Audio Processor
  • Audiophile-grade Headphone Amplifier
  • Blaster Acoustic Engine Pro
  • Best-in-class Console Gaming Audio
  • Immersive 3D PC Gaming Audio
  • Native 7.1 Surround Sound Support
  • FPGA precision clock management+OLED Displaying+9 hours battery life+2 microphones with cVC 8.0 noise cancellation
  • Can be remotely controlled via FiiO Music app to swtich channel balance,8 different DAC lowpass filter and 10-band EQ
  • For greater power and detail resolution,the BTR5 features both balanced 2.5mm and single-ended 3.5mm outpts.
  • CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
  • Including Hi-fi DACs(ES9218P*2) for extremely detailed reproduction of sound and Independent control chip Xmos XUF208 for the ultimate in decoding performance, supporting up to 384kHz and native DSD
  • COMPACT SIZE: The professional integrated headphone receiver features a mini compact size and measures 4.07” x 1.18” x 2.24”, easy to carry and use on the road. Perfect for both on-stage and in-studio performances or applications
  • SUPERIOR AUDIO QUALITY: The PHA40 contains 4 high powered stereo amps that maintain the highest sonic quality even at maximum volume levels. These ultra-low noise operational amplifiers are included for outstanding audio performance
  • ¼” TRS OUTPUT JACKS: This 4-channel headphones splitter is equipped w/ 4 ¼” stereo headphone TRS output connector jacks which allow you to control up to 4 headphones at once. Also equipped w/ ¼” TRS source input connector jack for your Pyle Pro mixer
  • INDEPENDENT VOLUME CONTROLS: Each listener can determine their own volume level using the dedicated output level controls. Features independent channel rotary volume knob control for each listener’s convenience. Also features a power ON LED indicator
  • POWERS 4 HEADPHONES: The Pyle Stereo Headphone Amplifier is a monitor distribution system that powers practically any headphones - up to four pairs at the same time. This allows four people in your studio to listen to the main mix while recording
  • CNC Aluminum shell with super mini size. Very solid workmanship. Prompt and courteous customer service.18-month warranty and life technical support. For any questions, please contact us on Amazon.
  • It can also be used as a stereo preamplifier for other amplifiers and active speakers. For better preamp function, we recommend NS-10P (ASIN: B07719G56B).
  • Upgrade circuit can ensure lower background noise, more powerful bass and more brilliant treble.
  • New version adopts 6J3 vacuum & valve tube, which has warmer tube sound and more replaceable tubes.
  • NS-08E is a Hi-Fi tube headphone amp. It can offer >=1100mW at 32Ω and can drive 18~600 ohm headphones & headsets.
  • Mono summing
  • Compact 1/3U rack-mount chassis
  • Daisy-chain multiple units
  • Control room cue monitor w/ level control
  • Wide dynamic range
  • 4 screaming-loud (130 mW per channel) stereo headphone amps

More Info

Mackie HM Series, 4-Way Headphone Amplifier Mixer Accessory 1-ch x 4 headphones (HM-4)

Search only Mackie brand name
Mackie HM Series, 4-Way Headphone Amplifier Mixer Accessory 1-ch x 4 headphones (HM-4)

Current price: 39.99 USD

Saving: $2.00 (5%)


Check price and availability


Height: 2 Inches

Length: 4.3 Inches

Width: 2.3 Inches

Weight: 0.5 Pounds

Warranty: 1-year all inclusive, nontransferable.

  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design
  • Backlit Volume Control with Illuminated Volume Indicator
  • Built-in SB-Axx1 Audio Processor
  • Audiophile-grade Headphone Amplifier
  • Blaster Acoustic Engine Pro
  • Best-in-class Console Gaming Audio
  • Immersive 3D PC Gaming Audio
  • Native 7.1 Surround Sound Support
  • FPGA precision clock management+OLED Displaying+9 hours battery life+2 microphones with cVC 8.0 noise cancellation
  • Can be remotely controlled via FiiO Music app to swtich channel balance,8 different DAC lowpass filter and 10-band EQ
  • For greater power and detail resolution,the BTR5 features both balanced 2.5mm and single-ended 3.5mm outpts.
  • CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
  • Including Hi-fi DACs(ES9218P*2) for extremely detailed reproduction of sound and Independent control chip Xmos XUF208 for the ultimate in decoding performance, supporting up to 384kHz and native DSD
  • COMPACT SIZE: The professional integrated headphone receiver features a mini compact size and measures 4.07” x 1.18” x 2.24”, easy to carry and use on the road. Perfect for both on-stage and in-studio performances or applications
  • SUPERIOR AUDIO QUALITY: The PHA40 contains 4 high powered stereo amps that maintain the highest sonic quality even at maximum volume levels. These ultra-low noise operational amplifiers are included for outstanding audio performance
  • ¼” TRS OUTPUT JACKS: This 4-channel headphones splitter is equipped w/ 4 ¼” stereo headphone TRS output connector jacks which allow you to control up to 4 headphones at once. Also equipped w/ ¼” TRS source input connector jack for your Pyle Pro mixer
  • INDEPENDENT VOLUME CONTROLS: Each listener can determine their own volume level using the dedicated output level controls. Features independent channel rotary volume knob control for each listener’s convenience. Also features a power ON LED indicator
  • POWERS 4 HEADPHONES: The Pyle Stereo Headphone Amplifier is a monitor distribution system that powers practically any headphones - up to four pairs at the same time. This allows four people in your studio to listen to the main mix while recording
  • CNC Aluminum shell with super mini size. Very solid workmanship. Prompt and courteous customer service.18-month warranty and life technical support. For any questions, please contact us on Amazon.
  • It can also be used as a stereo preamplifier for other amplifiers and active speakers. For better preamp function, we recommend NS-10P (ASIN: B07719G56B).
  • Upgrade circuit can ensure lower background noise, more powerful bass and more brilliant treble.
  • New version adopts 6J3 vacuum & valve tube, which has warmer tube sound and more replaceable tubes.
  • NS-08E is a Hi-Fi tube headphone amp. It can offer >=1100mW at 32Ω and can drive 18~600 ohm headphones & headsets.
  • Mono summing
  • Compact 1/3U rack-mount chassis
  • Daisy-chain multiple units
  • Control room cue monitor w/ level control
  • Wide dynamic range
  • 4 screaming-loud (130 mW per channel) stereo headphone amps
  • Built-like-a-tank construction
  • Powered via the included 12V AC adapter
  • Individual level control for each output
  • Share a single stereo source with up to 4 pairs of headphones

More Info

Schiit Magni 3 Heresy 100% Op-Amp-Based Headphone Amp and Preamp

Search only Schiit brand name
Schiit Magni 3 Heresy 100% Op-Amp-Based Headphone Amp and Preamp

Current price: 119 USD


Check price and availability


  • iphone to headphone amp (Note: Lightning to 3.5mm cable is not included, you need to buy it yourself)
  • Headphone Amplifier works for SONY, Sennheiser RS120, HDR 120 and beyerdynamic headphone.
  • Portable Headphone Amplifier which make it convenient to carry, can output remarkable sound without distortion. Audio Input: 3.5 mm Jack, Audio output: 3.5 mm Jack
  • High/Low gain switch for optimal performance of the headphones.
  • Headphone amplifier using Time: More Than 15 Hours, Load Impedance: 16-300Ω.
  • Perfect for Music and Gaming:When you use it for music, it can bring you fantastic music enjoyment.DAC-X6 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Efficient protection and long life: The audio decoder uses OPA2134 and NE5532P two special op amps specially designed for audio. The op amp can be freely replaced and upgraded. At the same time, a relay protectors may protect the headphones and speakers.
  • Chipset: The mini amplifier chip uses OPA2134PA+6120A2+CS4398+SA9023+OP275G to provide strong guarantee for tone input and output.
  • A variety of input and output modes: Amplifier can be PC-USB, optical fiber, coaxial three inputs, can be connected to TV set-top box, DVD, DCD; output mode has RAC, 6.35mm headphone port 2, can be connected to power amplifier, tube vacuum amp, active speaker
  • Unique Design: Compact and adaptable, connect to active speakers via RCA to improve sound quality, or for use as a powerful headphone amp.NOTICE:DAC-X6 volume adjustment only works on headphones. Headphone and RCA output will emit sound at the same time when the DAC-X6 is working. You can turn off your active speakers or amplifiers according to your needs
  • Can be charged during use
  • Self powered amplifier
  • Durable anodised aluminum Chassis
  • Compact design
  • Backlit Volume Control with Illuminated Volume Indicator
  • Built-in SB-Axx1 Audio Processor
  • Audiophile-grade Headphone Amplifier
  • Blaster Acoustic Engine Pro
  • Best-in-class Console Gaming Audio
  • Immersive 3D PC Gaming Audio
  • Native 7.1 Surround Sound Support
  • FPGA precision clock management+OLED Displaying+9 hours battery life+2 microphones with cVC 8.0 noise cancellation
  • Can be remotely controlled via FiiO Music app to swtich channel balance,8 different DAC lowpass filter and 10-band EQ
  • For greater power and detail resolution,the BTR5 features both balanced 2.5mm and single-ended 3.5mm outpts.
  • CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
  • Including Hi-fi DACs(ES9218P*2) for extremely detailed reproduction of sound and Independent control chip Xmos XUF208 for the ultimate in decoding performance, supporting up to 384kHz and native DSD
  • COMPACT SIZE: The professional integrated headphone receiver features a mini compact size and measures 4.07” x 1.18” x 2.24”, easy to carry and use on the road. Perfect for both on-stage and in-studio performances or applications
  • SUPERIOR AUDIO QUALITY: The PHA40 contains 4 high powered stereo amps that maintain the highest sonic quality even at maximum volume levels. These ultra-low noise operational amplifiers are included for outstanding audio performance
  • ¼” TRS OUTPUT JACKS: This 4-channel headphones splitter is equipped w/ 4 ¼” stereo headphone TRS output connector jacks which allow you to control up to 4 headphones at once. Also equipped w/ ¼” TRS source input connector jack for your Pyle Pro mixer
  • INDEPENDENT VOLUME CONTROLS: Each listener can determine their own volume level using the dedicated output level controls. Features independent channel rotary volume knob control for each listener’s convenience. Also features a power ON LED indicator
  • POWERS 4 HEADPHONES: The Pyle Stereo Headphone Amplifier is a monitor distribution system that powers practically any headphones - up to four pairs at the same time. This allows four people in your studio to listen to the main mix while recording
  • CNC Aluminum shell with super mini size. Very solid workmanship. Prompt and courteous customer service.18-month warranty and life technical support. For any questions, please contact us on Amazon.
  • It can also be used as a stereo preamplifier for other amplifiers and active speakers. For better preamp function, we recommend NS-10P (ASIN: B07719G56B).
  • Upgrade circuit can ensure lower background noise, more powerful bass and more brilliant treble.
  • New version adopts 6J3 vacuum & valve tube, which has warmer tube sound and more replaceable tubes.
  • NS-08E is a Hi-Fi tube headphone amp. It can offer >=1100mW at 32Ω and can drive 18~600 ohm headphones & headsets.
  • Mono summing
  • Compact 1/3U rack-mount chassis
  • Daisy-chain multiple units
  • Control room cue monitor w/ level control
  • Wide dynamic range
  • 4 screaming-loud (130 mW per channel) stereo headphone amps
  • Built-like-a-tank construction
  • Powered via the included 12V AC adapter
  • Individual level control for each output
  • Share a single stereo source with up to 4 pairs of headphones
  • With its built-in time-delayed start-up and instant shut-down, there’ll be no glitches or pops through either headphones or speakers. Product is supplied with a 110 – 120V US power supply suitable for use in the United States, Canada, and Mexico. This power supply will not work in 220 – 240V countries.
  • Includes preamp outputs that you can connect to your desktop powered monitors for a complete system, or to a speaker power amp and use it as a preamp.
  • From IEMs to hard-to-drive planar designs, Magni 3 Heresy has the power, performance, low noise, and versatility to meet the needs of your headphones.
  • Utilizes super high quality parts, including a multiple paralleled output stage with feedforward. Designed and built in California.
  • Magni Heresy is a 100% op-amp-based headphone amp that delivers spectacular measurements with a full 2400mW into 32 ohms, tremendous power reserves, low distortion, an exceptionally low noise floor, and switchable gain.

More Info

1    2    3    4    5    6    7    8    9    10