Best Heat Guns. Reviews November, 2020

SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122℉~1202℉(50℃- 650℃)with Overload Protection for Crafts, Shrinking PVC, Stripping Paint

Search only SEEKONE brand name
SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122℉~1202℉(50℃- 650℃)with Overload Protection for Crafts, Shrinking PVC, Stripping Paint

Current price: 27.99 USD


Check price and availability


Height: 1.5 Inches

Length: 9.76 Inches

Width: 7.22 Inches

Weight: 1.9 Pounds

  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min

More Info

Genesis GHG1500A 12.5 Amp Dual-Temperature Heat Gun Kit with High and Low Settings, Air Reduction Nozzle, Reflector Nozzle, and Two Deflector Nozzles

Search only Genesis brand name
Genesis GHG1500A 12.5 Amp Dual-Temperature Heat Gun Kit with High and Low Settings, Air Reduction Nozzle, Reflector Nozzle, and Two Deflector Nozzles

Current price: 15.97 USD


Check price and availability


Height: 2.75 Inches

Length: 8.75 Inches

Width: 8.5 Inches

Weight: 2 Pounds

Warranty: 2 year

  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor

More Info

PORTER-CABLE Heat Gun, 1500-Watt (PC1500HG)

Search only PORTER-CABLE brand name
PORTER-CABLE Heat Gun, 1500-Watt (PC1500HG)

Current price: 32.22 USD

Saving: $7.75 (19%)


Check price and availability


Height: 10.63 Inches

Length: 11.5 Inches

Width: 4.13 Inches

Weight: 1 Pounds

Warranty: Comes with Manufacturer Warranty.

  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor

More Info

Homidic 6.56FT Long Heat Gun, Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp

Search only Homidic brand name
Homidic 6.56FT Long Heat Gun, Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp

Current price: 12.99 USD

Saving: $2.00 (13%)


Check price and availability


  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor
  • ★ Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
  • ★ DIY essentials part: If you like DIY, this is a good accessory for you. Even, you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Voltage & Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use
  • ★ long cable enough for crafting: 6. 56ft long cable ! ! ! ! ! hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, Mini dimensions 240*50mm/ 9. 44*1. 97in

More Info

BLACK+DECKER Heat Gun, Dual Temperature (HG1300)

Search only BLACK+DECKER brand name
BLACK+DECKER Heat Gun, Dual Temperature (HG1300)

Current price: 23.42 USD

Saving: $6.57 (22%)


Check price and availability


Height: 9.625 Inches

Length: 9.375 Inches

Width: 3 Inches

Weight: 1.63 Pounds

Warranty: 2 Year Warranty

  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor
  • ★ Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
  • ★ DIY essentials part: If you like DIY, this is a good accessory for you. Even, you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Voltage & Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use
  • ★ long cable enough for crafting: 6. 56ft long cable ! ! ! ! ! hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, Mini dimensions 240*50mm/ 9. 44*1. 97in
  • Ideal for stripping paint, loosening rusted bolt and my other applications
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • Included Components: HG1300 Heat Gun
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications

More Info

Heat Gun Dual Temperature Settings, PRULDE N2190 1500W Hot Air Gun 800°F - 1112°F, Overload Protection with 4 Metal Nozzle Attachments for Shrink Wrapping/Tubing, Paint Removal

Search only Neu Master brand name
Heat Gun Dual Temperature Settings, PRULDE N2190 1500W Hot Air Gun 800°F - 1112°F, Overload Protection with 4 Metal Nozzle Attachments for Shrink Wrapping/Tubing, Paint Removal

Current price: 18.95 USD

Saving: $3.94 (17%)


Check price and availability


Height: 9.45 Inches

Length: 9.06 Inches

Width: 3.35 Inches

Weight: 1.9 Pounds

  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor
  • ★ Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
  • ★ DIY essentials part: If you like DIY, this is a good accessory for you. Even, you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Voltage & Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use
  • ★ long cable enough for crafting: 6. 56ft long cable ! ! ! ! ! hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, Mini dimensions 240*50mm/ 9. 44*1. 97in
  • Ideal for stripping paint, loosening rusted bolt and my other applications
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • Included Components: HG1300 Heat Gun
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • ▶VERSATILE ACCESSORIES - 4 Nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.
  • ▶SAFETY - Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
  • ▶CONVENIENCE USE - The 6.5Ft power cord with UL plug supports a wider range of use, very convenient for you to move freely in large work area. In addition, The Back support gives it stability when you’re putting it down on its back so it can be used hands free.
  • ▶STRONG POWER – Craft heat gun with 1500W heats up to maximum temperature 1112℉ quickly; Professional DC copper motor can guarantee more stable operation.
  • ▶DUAL TEMPERATURE - 2 Temperature settings 800℉ & 1112℉ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.

More Info

Heat Gun Chandler Tool Dual Temp Hot Air Gun for Crafts, Epoxy Resin, Shrink Wrap, Vinyl, Embossing, Electronics, Phone Repair & DIY (Blue)

Search only Chandler Tool brand name
Heat Gun Chandler Tool Dual Temp Hot Air Gun for Crafts, Epoxy Resin, Shrink Wrap, Vinyl, Embossing, Electronics, Phone Repair & DIY (Blue)

Current price: 24.92 USD


Check price and availability


  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor
  • ★ Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
  • ★ DIY essentials part: If you like DIY, this is a good accessory for you. Even, you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Voltage & Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use
  • ★ long cable enough for crafting: 6. 56ft long cable ! ! ! ! ! hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, Mini dimensions 240*50mm/ 9. 44*1. 97in
  • Ideal for stripping paint, loosening rusted bolt and my other applications
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • Included Components: HG1300 Heat Gun
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • ▶VERSATILE ACCESSORIES - 4 Nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.
  • ▶SAFETY - Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
  • ▶CONVENIENCE USE - The 6.5Ft power cord with UL plug supports a wider range of use, very convenient for you to move freely in large work area. In addition, The Back support gives it stability when you’re putting it down on its back so it can be used hands free.
  • ▶STRONG POWER – Craft heat gun with 1500W heats up to maximum temperature 1112℉ quickly; Professional DC copper motor can guarantee more stable operation.
  • ▶DUAL TEMPERATURE - 2 Temperature settings 800℉ & 1112℉ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.
  • AMERICAN BRAND - Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth - the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you
  • UL-CERTIFIED - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
  • INSULATED - ERGONOMIC - LIGHT WEIGHT - QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
  • VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
  • VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!

More Info

Heat Gun, SEEKONE 1800W Hot Air Gun Kit with Large Digital LCD Display Variable Temperature (120°F-1100°F) Memory Settings and Four Nozzles for Paint Remover/Stripper, Home Improvement/Restoration

Search only SEEKONE brand name
Heat Gun, SEEKONE 1800W Hot Air Gun Kit with Large Digital LCD Display Variable Temperature (120°F-1100°F) Memory Settings and Four Nozzles for Paint Remover/Stripper, Home Improvement/Restoration

Current price: 39.99 USD


Check price and availability


  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor
  • ★ Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
  • ★ DIY essentials part: If you like DIY, this is a good accessory for you. Even, you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Voltage & Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use
  • ★ long cable enough for crafting: 6. 56ft long cable ! ! ! ! ! hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, Mini dimensions 240*50mm/ 9. 44*1. 97in
  • Ideal for stripping paint, loosening rusted bolt and my other applications
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • Included Components: HG1300 Heat Gun
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • ▶VERSATILE ACCESSORIES - 4 Nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.
  • ▶SAFETY - Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
  • ▶CONVENIENCE USE - The 6.5Ft power cord with UL plug supports a wider range of use, very convenient for you to move freely in large work area. In addition, The Back support gives it stability when you’re putting it down on its back so it can be used hands free.
  • ▶STRONG POWER – Craft heat gun with 1500W heats up to maximum temperature 1112℉ quickly; Professional DC copper motor can guarantee more stable operation.
  • ▶DUAL TEMPERATURE - 2 Temperature settings 800℉ & 1112℉ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.
  • AMERICAN BRAND - Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth - the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you
  • UL-CERTIFIED - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
  • INSULATED - ERGONOMIC - LIGHT WEIGHT - QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
  • VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
  • VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!
  • 【Four Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
  • 【Easy to Use with Scientific Ergonomic Design】The lightweight heat gun and Scientific Ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders, suitable for stripping paint, bending pipes, lighting charcoal, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and molding plastics as well as drying and thawing purpose.
  • 【Overload Protection & Power-Off Delay Function】Using the dual heating wire for rapid heating, the integrated overload protection function that blocks the heating element and prevents burning. Delay off function makes the heating wire cool down after shutting down, it will prolong the device life and safety.
  • 【Large LCD Display & Power-On Memory】 SEEKONE DIY heat gun digital control with Large LCD Display, you can adjust the air volume and temperature precisely, the use temperature is clearly on the LCD display. Our heat gun built-in power-on memory function, it will continue working on last set TEMP & SPEED, no need to resetting again. This is the first one heat gun can change ℃ to ℉, please press the 2 wind speed button in same time for few seconds to set the conversion between Celsius and Fahrenhe
  • 【Strong Power With 2 Modes】 SEEKONE Digital LCD Display 1800W Heat Gun provides strong power quickly heat up to 1100℉(600℃) in seconds. Two modes switch with variable temperature by digital control [ I: 120℉-750℉ (50℃~400℃); II: 120℉-1100℉ (50℃~600℃)] . It can adjust the temperature quickly with long press. Professional heater gives outstanding performance by keeping running 500 hours in max temperature.

More Info

Mlife Mini Heat Gun - 300 Watt - Dual-Temperature Heat Tool with 6.5FT Power Cord for DIY Acrylic Resin Cups Tumblers Embossing Shrink Wrapping Paint Drying Crafts Electronics DIY (Light Gray)

Search only Mlife brand name
Mlife Mini Heat Gun - 300 Watt - Dual-Temperature Heat Tool with 6.5FT Power Cord for DIY Acrylic Resin Cups Tumblers Embossing Shrink Wrapping Paint Drying Crafts Electronics DIY (Light Gray)

Current price: 15.99 USD


Check price and availability


  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor
  • ★ Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
  • ★ DIY essentials part: If you like DIY, this is a good accessory for you. Even, you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Voltage & Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use
  • ★ long cable enough for crafting: 6. 56ft long cable ! ! ! ! ! hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, Mini dimensions 240*50mm/ 9. 44*1. 97in
  • Ideal for stripping paint, loosening rusted bolt and my other applications
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • Included Components: HG1300 Heat Gun
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • ▶VERSATILE ACCESSORIES - 4 Nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.
  • ▶SAFETY - Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
  • ▶CONVENIENCE USE - The 6.5Ft power cord with UL plug supports a wider range of use, very convenient for you to move freely in large work area. In addition, The Back support gives it stability when you’re putting it down on its back so it can be used hands free.
  • ▶STRONG POWER – Craft heat gun with 1500W heats up to maximum temperature 1112℉ quickly; Professional DC copper motor can guarantee more stable operation.
  • ▶DUAL TEMPERATURE - 2 Temperature settings 800℉ & 1112℉ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.
  • AMERICAN BRAND - Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth - the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you
  • UL-CERTIFIED - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
  • INSULATED - ERGONOMIC - LIGHT WEIGHT - QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
  • VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
  • VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!
  • 【Four Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
  • 【Easy to Use with Scientific Ergonomic Design】The lightweight heat gun and Scientific Ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders, suitable for stripping paint, bending pipes, lighting charcoal, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and molding plastics as well as drying and thawing purpose.
  • 【Overload Protection & Power-Off Delay Function】Using the dual heating wire for rapid heating, the integrated overload protection function that blocks the heating element and prevents burning. Delay off function makes the heating wire cool down after shutting down, it will prolong the device life and safety.
  • 【Large LCD Display & Power-On Memory】 SEEKONE DIY heat gun digital control with Large LCD Display, you can adjust the air volume and temperature precisely, the use temperature is clearly on the LCD display. Our heat gun built-in power-on memory function, it will continue working on last set TEMP & SPEED, no need to resetting again. This is the first one heat gun can change ℃ to ℉, please press the 2 wind speed button in same time for few seconds to set the conversion between Celsius and Fahrenhe
  • 【Strong Power With 2 Modes】 SEEKONE Digital LCD Display 1800W Heat Gun provides strong power quickly heat up to 1100℉(600℃) in seconds. Two modes switch with variable temperature by digital control [ I: 120℉-750℉ (50℃~400℃); II: 120℉-1100℉ (50℃~600℃)] . It can adjust the temperature quickly with long press. Professional heater gives outstanding performance by keeping running 500 hours in max temperature.
  • Mlife City is committed to providing each customer with the best quality products and the highest standard services. Full refund or replacement is available if you are not satisfied with our Mini Heat Gun, Please be assured of the purchase.
  • UL-safety certified for North American use! Built with a heat sink, stabilize the internal temperature of the hot air gun and achieve a long-lasting performance.
  • Pencil-like heat gun design meet delicate need of resin projects. Retractable bracket for hands free operation for cup acrylic making. Handle part adopts salient point nonskid designs and fits comfortably in the user’s hand.
  • Mlife heat gun can be used for epoxy resin, embossing project, heating shrinkable film, embossed powder, rubber stamp. Two option of heat/speed setting(200℃/300℃), 6.5ft-length power cord, perfect for your detail work or big job of DIY craft!
  • Get tired of burning your job or blowing powder everywhere? Try Mlife heat gun to save your time and effort! Low speed/heat setting for detail work, high speed/heat setting gets big jobs done quicker!

More Info

Heat Gun, 1600W Heavy Duty Hot Air Gun Kit, Dual Temperature (140°F-1112°F) Hot Air Gun Kit with Four Metal Nozzles for DIY Shrink PVC Tubing/Wrapping/Crafts, Stripping Paint

Search only GDMONIN brand name
Heat Gun, 1600W Heavy Duty Hot Air Gun Kit, Dual Temperature (140°F-1112°F) Hot Air Gun Kit with Four Metal Nozzles for DIY Shrink PVC Tubing/Wrapping/Crafts, Stripping Paint

Current price: 24.99 USD


Check price and availability


  • ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • Warm RC engines to assist with start up
  • Use the Genesis Heat Gun for lighting charcoal grills without the need for smelly lighter fluid
  • Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle
  • Reflector Nozzle Speeds Thawing of Pipes. 3-position rocker type switch for high temperature, off and low temperature
  • Deflector Nozzles Protect Glass and Other Surfaces.BTU Heat Rating:2500
  • High and Low Temperature Settings for Versatility
  • 1500/750 Watt Heat Gun with Powerful 12.5 Amp Motor
  • 6 Feet high grade cord
  • Integrated hands free support stand
  • Variable temperature control dial
  • Dual fan speed selector
  • 1500 Watt motor
  • ★ Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously
  • ★ DIY essentials part: If you like DIY, this is a good accessory for you. Even, you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Voltage & Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use
  • ★ long cable enough for crafting: 6. 56ft long cable ! ! ! ! ! hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside, simple design and durable quality, Mini dimensions 240*50mm/ 9. 44*1. 97in
  • Ideal for stripping paint, loosening rusted bolt and my other applications
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • Included Components: HG1300 Heat Gun
  • Lightweight and compact design for ease of use and handling
  • Built-in stand for easy cool down
  • 2 temperature settings (750 Degrees and 1000 Degrees) for a variety of applications
  • ▶VERSATILE ACCESSORIES - 4 Nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.
  • ▶SAFETY - Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
  • ▶CONVENIENCE USE - The 6.5Ft power cord with UL plug supports a wider range of use, very convenient for you to move freely in large work area. In addition, The Back support gives it stability when you’re putting it down on its back so it can be used hands free.
  • ▶STRONG POWER – Craft heat gun with 1500W heats up to maximum temperature 1112℉ quickly; Professional DC copper motor can guarantee more stable operation.
  • ▶DUAL TEMPERATURE - 2 Temperature settings 800℉ & 1112℉ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.
  • AMERICAN BRAND - Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth - the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you
  • UL-CERTIFIED - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
  • INSULATED - ERGONOMIC - LIGHT WEIGHT - QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
  • VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
  • VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!
  • 【Four Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
  • 【Easy to Use with Scientific Ergonomic Design】The lightweight heat gun and Scientific Ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders, suitable for stripping paint, bending pipes, lighting charcoal, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and molding plastics as well as drying and thawing purpose.
  • 【Overload Protection & Power-Off Delay Function】Using the dual heating wire for rapid heating, the integrated overload protection function that blocks the heating element and prevents burning. Delay off function makes the heating wire cool down after shutting down, it will prolong the device life and safety.
  • 【Large LCD Display & Power-On Memory】 SEEKONE DIY heat gun digital control with Large LCD Display, you can adjust the air volume and temperature precisely, the use temperature is clearly on the LCD display. Our heat gun built-in power-on memory function, it will continue working on last set TEMP & SPEED, no need to resetting again. This is the first one heat gun can change ℃ to ℉, please press the 2 wind speed button in same time for few seconds to set the conversion between Celsius and Fahrenhe
  • 【Strong Power With 2 Modes】 SEEKONE Digital LCD Display 1800W Heat Gun provides strong power quickly heat up to 1100℉(600℃) in seconds. Two modes switch with variable temperature by digital control [ I: 120℉-750℉ (50℃~400℃); II: 120℉-1100℉ (50℃~600℃)] . It can adjust the temperature quickly with long press. Professional heater gives outstanding performance by keeping running 500 hours in max temperature.
  • Mlife City is committed to providing each customer with the best quality products and the highest standard services. Full refund or replacement is available if you are not satisfied with our Mini Heat Gun, Please be assured of the purchase.
  • UL-safety certified for North American use! Built with a heat sink, stabilize the internal temperature of the hot air gun and achieve a long-lasting performance.
  • Pencil-like heat gun design meet delicate need of resin projects. Retractable bracket for hands free operation for cup acrylic making. Handle part adopts salient point nonskid designs and fits comfortably in the user’s hand.
  • Mlife heat gun can be used for epoxy resin, embossing project, heating shrinkable film, embossed powder, rubber stamp. Two option of heat/speed setting(200℃/300℃), 6.5ft-length power cord, perfect for your detail work or big job of DIY craft!
  • Get tired of burning your job or blowing powder everywhere? Try Mlife heat gun to save your time and effort! Low speed/heat setting for detail work, high speed/heat setting gets big jobs done quicker!
  • 🔥 【Wide Application】: Ideal for varnish and paint removable(stripping paint), decorating, home improvement, upcycling, adhesives as well as thawing frozen pipes, shrinking PVC, loosening rusted bolts, bending plastics and much more.
  • 🔥 【High-Temperature Resistant】The hot air gun is made of ABS plastic, heat-resistant nylon, and stainless steel. When Heat Gun is working at a high temperature, this effect will not hinder the integrity of the gun and the user will not sense the heat through the handle. Designed with an ergonomic handle and sidebar to prevent accidental touch of the nozzle, this heat gun also features built-in overload protection to ensure safety during use.
  • 🔥 【Scientific Ergonomic Design 】The heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders;Designed with an ergonomic handle and sidebar to prevent accidental touch of the nozzle, this heat gun also features built-in overload protection to ensure safety during use.
  • 🔥 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
  • 🔥 【Strong Power With 2 Modes】 GDMONIN heat gun provides strong power to quickly heat up in seconds. The 1600W motor generates enough hot air for almost any project You can switch the temperature between the low setting of 140℉(60℃)and high of 1112℉ (600℃) with a single push of a button to easily help complete household home improvement tasks. Dual temperature option to meet different needs in your project.

More Info

1    2    3    4    5    6    7    8    9    10