Best Hydraulic Push In Plugs. Reviews November, 2020

Hydraulic Service Plugs Mix Box

Search only FKB brand name
Hydraulic Service Plugs Mix Box

Current price: 57.99 USD


Check price and availability


  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes

More Info

Mess Stopper Hydraulic Oil Service Plugs, 2 Large, 4 Medium, 8 Small Sizes, Round

Search only Mess Stopper brand name
Mess Stopper Hydraulic Oil Service Plugs, 2 Large, 4 Medium, 8 Small Sizes, Round

Current price: 36.99 USD


Check price and availability


  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.

More Info

AF C5229-08 - 1/2 Male JIC - Plug (4 Pack)

Search only Generic brand name
AF C5229-08 - 1/2 Male JIC - Plug (4 Pack)

Current price: 3.96 USD


Check price and availability


Weight: 0.5 Pounds

  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare

More Info

SharkBite U518LFA End Cap Plumbing 3/4 In, PEX Fittings, Push-to-Connect, Copper, CPVC, 3/4 inch, Brass

Search only SharkBite brand name
SharkBite U518LFA End Cap Plumbing 3/4 In, PEX Fittings, Push-to-Connect, Copper, CPVC, 3/4 inch, Brass

Current price: 7.84 USD

Saving: $1.65 (17%)


Check price and availability


Height: 2 Inches

Length: 7 Inches

Width: 5 Inches

Weight: 0.1 Pounds

Warranty: Lifetime

  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union

More Info

Bestgle 125Pcs 18 Sizes Rubber Grommet Assortment Kit O Ring Electrical Wire Gasket Washer Seal Ring Set for Protecting Wires, Plugs and Cables

Search only Bestgle brand name
Bestgle 125Pcs 18 Sizes Rubber Grommet Assortment Kit O Ring Electrical Wire Gasket Washer Seal Ring Set for Protecting Wires, Plugs and Cables

Current price: 8.77 USD


Check price and availability


  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union
  • Ideal for the connectors in the hydraulic machinery, pipelines, momentary push button switch, other electronic equipment and more
  • Widely applied to automobile, marine, RV wiring jobs, leaky faucets hoses, electronic equi and furniture
  • Perfect to prevent leaks while working with plumbing, hydraulics, air and gas connections
  • Made of flexible and durable rubber, Heat-resisting, mineral oil-resisting, wear-resisting
  • Total 125 pieces rubber grommets with 18 sizes, can meet your different needs

More Info

1/4 Push to Connect Fittings - Elbow Push Connection Plastic Quick Connect Fittings 10 pack

Search only DERNORD brand name
1/4 Push to Connect Fittings - Elbow Push Connection Plastic Quick Connect Fittings 10 pack

Current price: 9.99 USD

Saving: $3.00 (23%)


Check price and availability


  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union
  • Ideal for the connectors in the hydraulic machinery, pipelines, momentary push button switch, other electronic equipment and more
  • Widely applied to automobile, marine, RV wiring jobs, leaky faucets hoses, electronic equi and furniture
  • Perfect to prevent leaks while working with plumbing, hydraulics, air and gas connections
  • Made of flexible and durable rubber, Heat-resisting, mineral oil-resisting, wear-resisting
  • Total 125 pieces rubber grommets with 18 sizes, can meet your different needs
  • Plastic push features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Quick connect fittings negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 1/4 inch to 1/4 inch; material: plastic

More Info

AF 22S-S06 - #6 Zero Leak Plug(ORB Thread) (9/16''-18 Threads) (4 Pack)

Search only Generic brand name
AF 22S-S06 - #6 Zero Leak Plug(ORB Thread) (9/16''-18 Threads) (4 Pack)

Current price: 4.28 USD


Check price and availability


Weight: 0.12 Pounds

  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union
  • Ideal for the connectors in the hydraulic machinery, pipelines, momentary push button switch, other electronic equipment and more
  • Widely applied to automobile, marine, RV wiring jobs, leaky faucets hoses, electronic equi and furniture
  • Perfect to prevent leaks while working with plumbing, hydraulics, air and gas connections
  • Made of flexible and durable rubber, Heat-resisting, mineral oil-resisting, wear-resisting
  • Total 125 pieces rubber grommets with 18 sizes, can meet your different needs
  • Plastic push features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Quick connect fittings negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 1/4 inch to 1/4 inch; material: plastic
  • #6 Zero Leak Plug(ORB Thread) Additional Information:Zero Leak Gold Specs

More Info

VEVOR Push Pull Force Gauge NK-100,Push Pull Gauge Mechanical Push Pull Force,Meter Dial Push Force Gauge,ABS Plastic Pull Force Meter for Tension and Compression Load Plug Force Destructive Tests

Search only VEVOR brand name
VEVOR Push Pull Force Gauge NK-100,Push Pull Gauge Mechanical Push Pull Force,Meter Dial Push Force Gauge,ABS Plastic Pull Force Meter for Tension and Compression Load Plug Force Destructive Tests

Current price: 52.99 USD


Check price and availability


Height: 3.5 Inches

Length: 13 Inches

Width: 7.5 Inches

Weight: 2.7 Pounds

  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union
  • Ideal for the connectors in the hydraulic machinery, pipelines, momentary push button switch, other electronic equipment and more
  • Widely applied to automobile, marine, RV wiring jobs, leaky faucets hoses, electronic equi and furniture
  • Perfect to prevent leaks while working with plumbing, hydraulics, air and gas connections
  • Made of flexible and durable rubber, Heat-resisting, mineral oil-resisting, wear-resisting
  • Total 125 pieces rubber grommets with 18 sizes, can meet your different needs
  • Plastic push features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Quick connect fittings negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 1/4 inch to 1/4 inch; material: plastic
  • #6 Zero Leak Plug(ORB Thread) Additional Information:Zero Leak Gold Specs
  • 【EXTENSIVE APPLICATION】 - The tension force gauge is widely applied in such industries as electronic appliances, light industrial textiles, construction hardware, lighters and ignition devices, and scientific research institutions for the push or pull load test.
  • 【SIMPLE & COMPLETE】 - The spring tension scale can be easily operated by one hand or mounted on all workbench types. A complete set of accessories is provided for various push and pull tests. Load range: 10 N/1 kg~100 N/10 kg.
  • 【PEAK/TRACK】 - The PEAK/TRACK knob on the tensile strength tester can switch between the peak value load test (the needle stands still indicating peak force) and the continuous load test (the needle moves following the change of power).
  • 【HIGH ACCURACY】 - This belt tension gauge adopts the pointer indication, which has convenient reading, accurate measurement, and high precision. Two units of newton and kilograms are displayed at the same time, without unit conversion.
  • 【SUPERIOR QUALITY】 - The shell of the trigger pull gauge is built with ABS plastic, which has the characteristics of high strength and good toughness; the pull test rod and push test rod are made of pure copper with the electroplated surface, sturdy and durable.

More Info

AF C5229-06 - 3/8 Male JIC - Plug (4 Pack)

Search only Generic brand name
AF C5229-06 - 3/8 Male JIC - Plug (4 Pack)

Current price: 3.08 USD


Check price and availability


Weight: 0.3 Pounds

  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union
  • Ideal for the connectors in the hydraulic machinery, pipelines, momentary push button switch, other electronic equipment and more
  • Widely applied to automobile, marine, RV wiring jobs, leaky faucets hoses, electronic equi and furniture
  • Perfect to prevent leaks while working with plumbing, hydraulics, air and gas connections
  • Made of flexible and durable rubber, Heat-resisting, mineral oil-resisting, wear-resisting
  • Total 125 pieces rubber grommets with 18 sizes, can meet your different needs
  • Plastic push features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Quick connect fittings negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 1/4 inch to 1/4 inch; material: plastic
  • #6 Zero Leak Plug(ORB Thread) Additional Information:Zero Leak Gold Specs
  • 【EXTENSIVE APPLICATION】 - The tension force gauge is widely applied in such industries as electronic appliances, light industrial textiles, construction hardware, lighters and ignition devices, and scientific research institutions for the push or pull load test.
  • 【SIMPLE & COMPLETE】 - The spring tension scale can be easily operated by one hand or mounted on all workbench types. A complete set of accessories is provided for various push and pull tests. Load range: 10 N/1 kg~100 N/10 kg.
  • 【PEAK/TRACK】 - The PEAK/TRACK knob on the tensile strength tester can switch between the peak value load test (the needle stands still indicating peak force) and the continuous load test (the needle moves following the change of power).
  • 【HIGH ACCURACY】 - This belt tension gauge adopts the pointer indication, which has convenient reading, accurate measurement, and high precision. Two units of newton and kilograms are displayed at the same time, without unit conversion.
  • 【SUPERIOR QUALITY】 - The shell of the trigger pull gauge is built with ABS plastic, which has the characteristics of high strength and good toughness; the pull test rod and push test rod are made of pure copper with the electroplated surface, sturdy and durable.
  • 3/8 Male JIC - Plug Additional Information: JIC 37 Degree Flare

More Info

1/2" Ag ISO 5675 Hydraulic Quick Connect Tractor Couplers, Ball Pioneer Style w/Dust Caps, 2 Sets

Search only Summit Hydraulics brand name
1/2

Current price: 31.95 USD


Check price and availability


Weight: 1.7 Pounds

  • TPE 55 Shore Material Temperature Range: -58F to 248F
  • 2 pieces of a 14-42mm plug (Large)
  • 4 pieces of a 6-22mm plug (Medium)
  • 4 pieces of a 2-10mm plug (Small)
  • Box Includes
  • U.S. patent pending
  • Mess Stopper is made of oil-resistant NBR rubber and silicone-free. It is resistant to most fluids such as conventional and synthetic lubricating and hydraulic oils, transmission fluids, pure gasoline, diesel fuel, ethylene glycol coolants, and water. It has short-term resistance to ethanol blended fuel and brake fluids. To ensure compatibility, always test the Mess Stopper for fluid resistance by immersing it in the fluid and observing for degradation.
  • This service plug kit includes 2 large, 4 medium, and 8 small size plugs. Small size fits hole size range: 3/64” to 1/2” or 1mm to 13mm in diameter. Medium size fits hole size range: 5/16” to 1” or 8mm to 26mm in diameter. Large size fits hole size range: 1/2” to 1-1/2” or 12mm to 38mm in diameter. Includes a slider zip bag to keep your Mess Stopper clean during storage.
  • Prevents oil leaks and waste. Keeps equipment and oil clean and free of contaminants. High visibility "Hi-Viz" green/yellow color helps to remind you of the unconnected hoses, ports, and fittings during reassembly. Fits hoses, tubing, pipes, ports, and many types of fittings including JIC 37⁰ flare, 45⁰ flare, push-on, and SAE O-ring. May be cut to desired length with a utility knife or scissors. For industrial, farm, commercial, and DIY use.
  • Simply push and twist to insert. For unpressurized systems only. No need to keep or search for the right size plug or cap – Mess Stopper fits a wide range of sizes. Operating temperature: -10⁰F to 200⁰F or -23⁰C to 93⁰C.
  • 1/2 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination
  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union
  • Ideal for the connectors in the hydraulic machinery, pipelines, momentary push button switch, other electronic equipment and more
  • Widely applied to automobile, marine, RV wiring jobs, leaky faucets hoses, electronic equi and furniture
  • Perfect to prevent leaks while working with plumbing, hydraulics, air and gas connections
  • Made of flexible and durable rubber, Heat-resisting, mineral oil-resisting, wear-resisting
  • Total 125 pieces rubber grommets with 18 sizes, can meet your different needs
  • Plastic push features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Quick connect fittings negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 1/4 inch to 1/4 inch; material: plastic
  • #6 Zero Leak Plug(ORB Thread) Additional Information:Zero Leak Gold Specs
  • 【EXTENSIVE APPLICATION】 - The tension force gauge is widely applied in such industries as electronic appliances, light industrial textiles, construction hardware, lighters and ignition devices, and scientific research institutions for the push or pull load test.
  • 【SIMPLE & COMPLETE】 - The spring tension scale can be easily operated by one hand or mounted on all workbench types. A complete set of accessories is provided for various push and pull tests. Load range: 10 N/1 kg~100 N/10 kg.
  • 【PEAK/TRACK】 - The PEAK/TRACK knob on the tensile strength tester can switch between the peak value load test (the needle stands still indicating peak force) and the continuous load test (the needle moves following the change of power).
  • 【HIGH ACCURACY】 - This belt tension gauge adopts the pointer indication, which has convenient reading, accurate measurement, and high precision. Two units of newton and kilograms are displayed at the same time, without unit conversion.
  • 【SUPERIOR QUALITY】 - The shell of the trigger pull gauge is built with ABS plastic, which has the characteristics of high strength and good toughness; the pull test rod and push test rod are made of pure copper with the electroplated surface, sturdy and durable.
  • 3/8 Male JIC - Plug Additional Information: JIC 37 Degree Flare
  • Interchangeable with all ISO 5675 series including ball seat valve, poppet seal, push-pull couplings, and ISO 7241
  • 19,800 PSI Burst Rating (Coupled)
  • Harden Steel with 2900 PSI Rating
  • Most common couplers used in the agriculture, construction and logging industries
  • 2 Sets, 1/2" Body, 1/2" NPT Thread, Ball Valve

More Info

1    2    3    4    5    6    7    8    9    10