Best Hydraulic Tube Barbed Fitting Kits. Reviews September, 2020

Anderson Metals Brass Hose Fitting, Connector, 1" Barb x 1" Male Pipe

Search only Anderson Metals brand name
Anderson Metals Brass Hose Fitting, Connector, 1

Current price: 8.85 USD

Saving: $3.14 (26%)


Check price and availability


Height: 0.2 Inches

Length: 0.8 Inches

Width: 0.8 Inches

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

More Info

Legines 2pcs Barb Union 3/8" Barbed x 3/8" Barbed Splicer Brass Hose Fitting Mender Joiner

Search only Legines brand name
Legines 2pcs Barb Union 3/8

Current price: 7.29 USD


Check price and availability


Height: 4.330708657 Inches

Length: 5.118110231 Inches

Width: 1.968503935 Inches

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run

More Info

Dometic SeaStar ORB Fitting Kit, HF6005

Search only Sierra brand name
Dometic SeaStar ORB Fitting Kit, HF6005

Current price: 56.64 USD


Check price and availability


Height: 8 Inches

Length: 1 Inches

Width: 5 Inches

Weight: 1 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings

More Info

Taxutor 120-Pcs SAE Standard Brass Hydraulic Grease Fitting Assortment Kit – Straight, 90-Degree, 45-Degree Angled Zerk

Search only Taxutor brand name
Taxutor 120-Pcs SAE Standard Brass Hydraulic Grease Fitting Assortment Kit – Straight, 90-Degree, 45-Degree Angled Zerk

Current price: 34.5 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings
  • The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications.
  • Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable
  • Set Includes 6 Most Used Sizes: (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (30pc) 1/8"-27 straight 180-degrees
  • High Quality Brass Grease Nipple Fittings Kit

More Info

Quick Connect Fittings 4mm or 5/32 OD - 10 Pack Plastic Push to Connect Fittings Tube Straight Connect 4 Mm to 4 Mm Push Fit Fittings Tube Fittings

Search only DERPIPE brand name
Quick Connect Fittings 4mm or 5/32 OD - 10 Pack Plastic Push to Connect Fittings Tube Straight Connect 4 Mm to 4 Mm Push Fit Fittings Tube Fittings

Current price: 10.99 USD


Check price and availability


Length: 32.5 Millimeters

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings
  • The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications.
  • Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable
  • Set Includes 6 Most Used Sizes: (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (30pc) 1/8"-27 straight 180-degrees
  • High Quality Brass Grease Nipple Fittings Kit
  • Plastic push air fittings features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Push fitting negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push to connect fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 4mm to 4mm; material: plastic

More Info

Orbit DripMaster 67431 1/4-Inch Barb Assortment, 30-Pack

Search only Orbit brand name
Orbit DripMaster 67431 1/4-Inch Barb Assortment, 30-Pack

Current price: 7.34 USD

Saving: $2.65 (27%)


Check price and availability


Height: 5.75 Inches

Length: 1 Inches

Width: 3.5 Inches

Weight: 0.05 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings
  • The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications.
  • Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable
  • Set Includes 6 Most Used Sizes: (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (30pc) 1/8"-27 straight 180-degrees
  • High Quality Brass Grease Nipple Fittings Kit
  • Plastic push air fittings features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Push fitting negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push to connect fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 4mm to 4mm; material: plastic
  • For outdoor use with cold water only
  • Durable construction provides years of reliable use
  • Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows
  • For use with 1/4-inch distribution or soaker tubing
  • Includes an assortment of the most commonly used 1/4-inch drip fittings

More Info

Brass Flare Cap Assortment Kits, SAE 45 Degree Flared Tube Fitting 1/4" 5/16" 3/8" 1/2" 5/8" OD(5pcs)

Search only MeiChi brand name
Brass Flare Cap Assortment Kits, SAE 45 Degree Flared Tube Fitting 1/4

Current price: 12.99 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings
  • The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications.
  • Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable
  • Set Includes 6 Most Used Sizes: (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (30pc) 1/8"-27 straight 180-degrees
  • High Quality Brass Grease Nipple Fittings Kit
  • Plastic push air fittings features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Push fitting negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push to connect fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 4mm to 4mm; material: plastic
  • For outdoor use with cold water only
  • Durable construction provides years of reliable use
  • Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows
  • For use with 1/4-inch distribution or soaker tubing
  • Includes an assortment of the most commonly used 1/4-inch drip fittings
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical.
  • The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.
  • Contains:1/4" OD-1pc; 5/16" OD-1pc; 3/8" OD-1pc;1/2" OD-1pc; 5/8" OD-1pc(5pcs)

More Info

Utah Pneumatic 1/4“Od Air Line Push To Connect Fittings Pneumatic Fittings Kit 2 Splitters 2 Elbows 2 Tee 2 Straight 8pack air Union Quick Disconnect Tube Fittings Assortment push fitting

Search only utah pneumatic brand name
Utah Pneumatic 1/4“Od Air Line Push To Connect Fittings Pneumatic Fittings Kit 2 Splitters 2 Elbows 2 Tee 2 Straight 8pack air Union Quick Disconnect Tube Fittings Assortment push fitting

Current price: 14.25 USD


Check price and availability


Height: 10 Inches

Length: 10 Inches

Width: 0.1 Inches

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings
  • The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications.
  • Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable
  • Set Includes 6 Most Used Sizes: (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (30pc) 1/8"-27 straight 180-degrees
  • High Quality Brass Grease Nipple Fittings Kit
  • Plastic push air fittings features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Push fitting negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push to connect fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 4mm to 4mm; material: plastic
  • For outdoor use with cold water only
  • Durable construction provides years of reliable use
  • Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows
  • For use with 1/4-inch distribution or soaker tubing
  • Includes an assortment of the most commonly used 1/4-inch drip fittings
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical.
  • The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.
  • Contains:1/4" OD-1pc; 5/16" OD-1pc; 3/8" OD-1pc;1/2" OD-1pc; 5/8" OD-1pc(5pcs)
  • plastic tube fittings At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
  • All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
  • You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape pneumatic fittings kit
  • plastic fittings for tubing Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
  • utah pneumatic: push to connect air Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32~140°F Applicable Tube: PU/NYLON/Soft PE hose fitting air bag fittings pushlock air fittings

More Info

Anderson Metals 54056-0806 Brass Tube Fitting, Reducing Union, 3/8" x 1/2" Flare

Search only Anderson Metals brand name
Anderson Metals 54056-0806 Brass Tube Fitting, Reducing Union, 3/8

Current price: 10.9 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings
  • The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications.
  • Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable
  • Set Includes 6 Most Used Sizes: (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (30pc) 1/8"-27 straight 180-degrees
  • High Quality Brass Grease Nipple Fittings Kit
  • Plastic push air fittings features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Push fitting negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push to connect fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 4mm to 4mm; material: plastic
  • For outdoor use with cold water only
  • Durable construction provides years of reliable use
  • Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows
  • For use with 1/4-inch distribution or soaker tubing
  • Includes an assortment of the most commonly used 1/4-inch drip fittings
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical.
  • The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.
  • Contains:1/4" OD-1pc; 5/16" OD-1pc; 3/8" OD-1pc;1/2" OD-1pc; 5/8" OD-1pc(5pcs)
  • plastic tube fittings At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
  • All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
  • You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape pneumatic fittings kit
  • plastic fittings for tubing Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
  • utah pneumatic: push to connect air Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32~140°F Applicable Tube: PU/NYLON/Soft PE hose fitting air bag fittings pushlock air fittings
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connections on both ends
  • Reducing union to connect two tubes of different diameters

More Info

DERNORD 1/2" Barbed Hose x 1/2" NPT Male - Home Brew Fitting 304 Stainless Steel Pack of 2

Search only DERNORD brand name
DERNORD 1/2

Current price: 7.99 USD


Check price and availability


Weight: 0.26 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Note: Kindly refer size chart image before purchase
  • Intended for use with hose clamp or crimp type ferrule (sold separately)
  • Temperature range from -32 to +140 degrees F
  • Barbed shank provides secure connection to hose
  • Relative softness of brass threading when compared to other metals allows for a tight seal
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Barbed fitting for a tight seal on hoses
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to a hose on both ends
  • Union coupling for connecting two hoses with the same diameter in a straight run
  • Built with marine grade materials
  • Package includes two tee fittings
  • Caution: Not for use in an NPT helm/cylinder hose fitting port
  • 90° tee fittings feature two 3/8" ends and one center ORB fitting
  • Positionable O-Ring ORB hose fittings
  • The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications.
  • Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable
  • Set Includes 6 Most Used Sizes: (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (30pc) 1/8"-27 straight 180-degrees
  • High Quality Brass Grease Nipple Fittings Kit
  • Plastic push air fittings features: high pressure resistant and non tripping, all taper pipe threads are paint teflon leakage-proof rubber, offering good seal property; seal O-ring: NBR; lock claw: stainless steel
  • Tube fittings are easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently
  • Push fitting negative pressure: -29.5 in Hg/ -750mm Hg; working temperature: 32-160℉ / 0-70℃; application of air tube: polyurethane and nylon tube
  • Push to connect fitting working medium: compressed air, vacuum ( not other liquid); working pressure: 0-150 PSI/ 0-9.9kgf/cm2 (0-990kpa)
  • Push to connect fittings size: 4mm to 4mm; material: plastic
  • For outdoor use with cold water only
  • Durable construction provides years of reliable use
  • Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows
  • For use with 1/4-inch distribution or soaker tubing
  • Includes an assortment of the most commonly used 1/4-inch drip fittings
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical.
  • The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.
  • Contains:1/4" OD-1pc; 5/16" OD-1pc; 3/8" OD-1pc;1/2" OD-1pc; 5/8" OD-1pc(5pcs)
  • plastic tube fittings At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
  • All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
  • You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape pneumatic fittings kit
  • plastic fittings for tubing Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
  • utah pneumatic: push to connect air Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32~140°F Applicable Tube: PU/NYLON/Soft PE hose fitting air bag fittings pushlock air fittings
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connections on both ends
  • Reducing union to connect two tubes of different diameters
  • 304 stainless steel for strength and resistance to corrosion
  • Temperature range from -30 to +150 degrees F
  • Maximum working pressure of 150 psi
  • Great for attaching 1/2" inner diameter hose, and 1/2" ball valve
  • 1/2" Barb Hose to 1/2" NPT Fitting

More Info

1    2    3    4    5    6    7    8    9    10