Elegant Hydraulic Tube Compression Fitting Nuts. Reviews January, 2021, page 10

Midland 10-473 Brass SAE 45 Degree Flare Reducer, 3/8" Male Flare x 5/8" Female Flare Thread, 1.12" Hex Size

More from Industrial & Scientific
Search only Midland brand name
Midland 10-473 Brass SAE 45 Degree Flare Reducer, 3/8

Current price: 17.37 USD


Check price and availability


  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass

More Info

uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD

More from Industrial & Scientific
Search only uxcell brand name
uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD

Current price: 7.99 USD


Check price and availability


Height: 1.97 Inches

Length: 1.97 Inches

Width: 1.97 Inches

  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch

More Info

Neiko 20656A Auto Double Flaring Copper Aluminum Steel Brake Line and Brass Tubing Tool Kit | 9 Piece | 5 Adaptors | 4.8 mm – 12.7 mm | 3/16” – 1/2"" | For Car Mechanics or HVAC"

More from Industrial & Scientific
Search only Neiko brand name
Neiko 20656A Auto Double Flaring Copper Aluminum Steel Brake Line and Brass Tubing Tool Kit | 9 Piece | 5 Adaptors | 4.8 mm – 12.7 mm | 3/16” – 1/2

Current price: 25.98 USD


Check price and availability


  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.

More Info

Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2" x 1/2" Tube OD

More from Industrial & Scientific
Search only Anderson Metals brand name
Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2

Current price: 12.08 USD


Check price and availability


Height: 0.5 Inches

Length: 1.8 Inches

Width: 1.6 Inches

  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Primary uses water, gasoline, oil and vacuum lines
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Use with copper, brass, aluminum, or plastic tubing
  • Three piece construction - nut, sleeve and body with attached insert

More Info

Eaton Aeroquip 2041-8-8S Bulkhead Union, JIC 37° End Types, Carbon Steel, 3/4 JIC(m) End Size, 1/2" Tube OD

More from Industrial & Scientific
Search only Aeroquip brand name
Eaton Aeroquip 2041-8-8S Bulkhead Union, JIC 37° End Types, Carbon Steel, 3/4 JIC(m) End Size, 1/2

Current price: 16.8 USD


Check price and availability


Height: 1.3 Inches

Length: 2.6 Inches

Width: 1.3 Inches

  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Primary uses water, gasoline, oil and vacuum lines
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Use with copper, brass, aluminum, or plastic tubing
  • Three piece construction - nut, sleeve and body with attached insert
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings
  • Zinc-plated steel for strength, durability, and resistance to corrosion
  • Male 3/4-16 JIC threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes
  • Bulkhead union tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting tubes through a container wall in hydraulic applications

More Info

OTC 4503 Stinger Double Flaring Tool Kit

More from Industrial & Scientific
Search only OTC brand name
OTC 4503 Stinger Double Flaring Tool Kit

Current price: 27.65 USD

Saving: $15.30 (36%)


Check price and availability


Height: 9.79921258843 Inches

Length: 2.4015748007 Inches

Width: 6.09842519063 Inches

Weight: 0.0025573622392 Pounds

Warranty: One year limited warranty

  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Primary uses water, gasoline, oil and vacuum lines
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Use with copper, brass, aluminum, or plastic tubing
  • Three piece construction - nut, sleeve and body with attached insert
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings
  • Zinc-plated steel for strength, durability, and resistance to corrosion
  • Male 3/4-16 JIC threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes
  • Bulkhead union tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting tubes through a container wall in hydraulic applications
  • Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them
  • Forged, heat-treated steel yoke for long term performance and durability
  • Comprehensive set includes five adapters - 3/16, 1/4, 5/16, 3/8, and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm)
  • Chrome plated alloy steel swivel reduces friction and helps ensure a smooth, even flare
  • Designed to make double or single flares in copper, aluminum, and brass tubing as well as soft steel brake line tubing

More Info

EATON Weatherhead 1469X10 Air Brake Tubing, 90 Degree Elbow, Male Elbow to Male Pipe Thread, 5/8" Tube OD, 1/2" Male Pipe Thread

More from Industrial & Scientific
Search only Weatherhead brand name
EATON Weatherhead 1469X10 Air Brake Tubing, 90 Degree Elbow, Male Elbow to Male Pipe Thread, 5/8

Current price: 12.58 USD


Check price and availability


Height: 0.9 Inches

Length: 2 Inches

Width: 1.7 Inches

Weight: 0.35 Pounds

  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Primary uses water, gasoline, oil and vacuum lines
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Use with copper, brass, aluminum, or plastic tubing
  • Three piece construction - nut, sleeve and body with attached insert
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings
  • Zinc-plated steel for strength, durability, and resistance to corrosion
  • Male 3/4-16 JIC threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes
  • Bulkhead union tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting tubes through a container wall in hydraulic applications
  • Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them
  • Forged, heat-treated steel yoke for long term performance and durability
  • Comprehensive set includes five adapters - 3/16, 1/4, 5/16, 3/8, and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm)
  • Chrome plated alloy steel swivel reduces friction and helps ensure a smooth, even flare
  • Designed to make double or single flares in copper, aluminum, and brass tubing as well as soft steel brake line tubing
  • Item Package weight : 0.35 pounds
  • Package Dimension : 5.08 centimeters L x 3.302 centimeters W x 2.032 centimeters H
  • Tube Size: 5/8" Country of Origin (subject to change): United States

More Info

Brennan N2404-08-08-SS Stainless Steel Compression Tube Fitting, Straight Adapter, 1/2" Tube OD x NPT Male

More from Industrial & Scientific
Search only brennan brand name
Brennan N2404-08-08-SS Stainless Steel Compression Tube Fitting, Straight Adapter, 1/2

Current price: 14.73 USD


Check price and availability


Height: 4 Inches

Length: 3 Inches

Width: 2 Inches

Weight: 0.2 Pounds

  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Primary uses water, gasoline, oil and vacuum lines
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Use with copper, brass, aluminum, or plastic tubing
  • Three piece construction - nut, sleeve and body with attached insert
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings
  • Zinc-plated steel for strength, durability, and resistance to corrosion
  • Male 3/4-16 JIC threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes
  • Bulkhead union tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting tubes through a container wall in hydraulic applications
  • Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them
  • Forged, heat-treated steel yoke for long term performance and durability
  • Comprehensive set includes five adapters - 3/16, 1/4, 5/16, 3/8, and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm)
  • Chrome plated alloy steel swivel reduces friction and helps ensure a smooth, even flare
  • Designed to make double or single flares in copper, aluminum, and brass tubing as well as soft steel brake line tubing
  • Item Package weight : 0.35 pounds
  • Package Dimension : 5.08 centimeters L x 3.302 centimeters W x 2.032 centimeters H
  • Tube Size: 5/8" Country of Origin (subject to change): United States
  • Meets ISO 9001:2008 quality assurance standards
  • Double ferrule fitting reduces possibility of leakage
  • Made of stainless steel for resistance to scaling and corrosion
  • Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other
  • Coupler for connecting two pipes in a straight run

More Info

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/2" Tube OD (Pack of 10)

More from Industrial & Scientific
Search only beduan brand name
Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/2

Current price: 6.99 USD


Check price and availability


  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Primary uses water, gasoline, oil and vacuum lines
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Use with copper, brass, aluminum, or plastic tubing
  • Three piece construction - nut, sleeve and body with attached insert
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings
  • Zinc-plated steel for strength, durability, and resistance to corrosion
  • Male 3/4-16 JIC threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes
  • Bulkhead union tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting tubes through a container wall in hydraulic applications
  • Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them
  • Forged, heat-treated steel yoke for long term performance and durability
  • Comprehensive set includes five adapters - 3/16, 1/4, 5/16, 3/8, and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm)
  • Chrome plated alloy steel swivel reduces friction and helps ensure a smooth, even flare
  • Designed to make double or single flares in copper, aluminum, and brass tubing as well as soft steel brake line tubing
  • Item Package weight : 0.35 pounds
  • Package Dimension : 5.08 centimeters L x 3.302 centimeters W x 2.032 centimeters H
  • Tube Size: 5/8" Country of Origin (subject to change): United States
  • Meets ISO 9001:2008 quality assurance standards
  • Double ferrule fitting reduces possibility of leakage
  • Made of stainless steel for resistance to scaling and corrosion
  • Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other
  • Coupler for connecting two pipes in a straight run
  • Package Include: 10pcs inserts.
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
  • Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Type: Compression insert.
  • Tube Size:1/2" OD. 12mm OD

More Info

Compression Ferrule Tube Compression Fitting 4mm OD Tube Connector, for DIY Machine Tool Lubrication Brass Oil Pipe Fitting Adapter (Size : M6 x 1)

More from Industrial & Scientific
Search only MDD brand name
Compression Ferrule Tube Compression Fitting 4mm OD Tube Connector, for DIY Machine Tool Lubrication Brass Oil Pipe Fitting Adapter (Size : M6 x 1)

Current price: 15.76 USD


Check price and availability


Weight: 0.661386786 Pounds

  • Tolerance +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical
  • Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
  • 650F to +2500F (-530C to +1210C) range at maximum operating pressures
  • Good resistance - use long nut when greater vibration resistance is required
  • Made of brass
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • [CONVENIENCE]: Blow molded hard plastic storage case provides a convenient handle for easy travel and portability, and stores/organizes the kit for easy accessibility for your jobs on the go.
  • [INCLUDES]: Wide range of sizes: 5 adaptors- 4. 8mm through 12. 7mm (3/16, 1/4, 5/16, 3/8, 1/2").
  • [DESIGN]: Alloy steel and chrome plated material is used to construct the swivel to assist in reducing friction for an easier task to execute professional looking jobs with brake line or transmission cooling line replacements, and more.
  • [PRO GRADE]: Heavy duty design is forged from heat treated steel to ensure durability and strength to increase the service life and longevity of this brake line and tubing flaring tool set.
  • [APPLICATION]: Designed to use when flaring double or single flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing for brake/fuel lines, HVAC and a variety of other applications.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Primary uses water, gasoline, oil and vacuum lines
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Use with copper, brass, aluminum, or plastic tubing
  • Three piece construction - nut, sleeve and body with attached insert
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings
  • Zinc-plated steel for strength, durability, and resistance to corrosion
  • Male 3/4-16 JIC threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes
  • Bulkhead union tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting tubes through a container wall in hydraulic applications
  • Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them
  • Forged, heat-treated steel yoke for long term performance and durability
  • Comprehensive set includes five adapters - 3/16, 1/4, 5/16, 3/8, and 1/2 inch (4.8, 6.4, 7.9, 9.5, and 12.7 mm)
  • Chrome plated alloy steel swivel reduces friction and helps ensure a smooth, even flare
  • Designed to make double or single flares in copper, aluminum, and brass tubing as well as soft steel brake line tubing
  • Item Package weight : 0.35 pounds
  • Package Dimension : 5.08 centimeters L x 3.302 centimeters W x 2.032 centimeters H
  • Tube Size: 5/8" Country of Origin (subject to change): United States
  • Meets ISO 9001:2008 quality assurance standards
  • Double ferrule fitting reduces possibility of leakage
  • Made of stainless steel for resistance to scaling and corrosion
  • Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other
  • Coupler for connecting two pipes in a straight run
  • Package Include: 10pcs inserts.
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
  • Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Type: Compression insert.
  • Tube Size:1/2" OD. 12mm OD
  • installation requires.
  • hose pipe accessories Feature: Beautifully designed, smooth burr, stable performance, practical.Suitable for connecting pipe.
  • Easy installation: allows fast and comfortable connection with no tool required, quick joint to make tap and hose connecting easily
  • Fit For Tube Outer Diameter: 4mm; Fit For Tube Material: Nylon Tube / Aluminum Tube /C opper Tube
  • Hose connectors Material: Made of solid brass, resistance to corrosion and no rust, quality and durable material provides years of extended use

More Info

1    2    3    4    5    6    7    8    9    10