Best Hydraulic Tube Compression Fitting Plugs. Reviews December, 2020

Nigo Industrial Co. Brass Tube Fitting, SAE 45 Degree Flare Fitting, Flare Cap Nut (Nominal Pipe Size: 1/4")

Search only Nigo Industrial Co. brand name
Nigo Industrial Co. Brass Tube Fitting, SAE 45 Degree Flare Fitting, Flare Cap Nut (Nominal Pipe Size: 1/4

Current price: 5.49 USD


Check price and availability


Height: 0.6 Inches

Length: 0.64 Inches

Width: 0.56 Inches

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)

More Info

uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/4 Tube OD

Search only uxcell brand name
uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/4 Tube OD

Current price: 12.38 USD


Check price and availability


Height: 1.97 Inches

Length: 1.97 Inches

Width: 1.97 Inches

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch

More Info

uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD 3pcs

Search only uxcell brand name
uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD 3pcs

Current price: 16.4 USD


Check price and availability


Height: 1.97 Inches

Length: 1.97 Inches

Width: 1.97 Inches

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch

More Info

Brass Compression Tube Fitting, Union Assortment Kits, 1/8" 3/16" 1/4" 5/16" 3/8" OD (5pcs)

Search only MeiChi brand name
Brass Compression Tube Fitting, Union Assortment Kits, 1/8

Current price: 14.99 USD


Check price and availability


  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Contains: 1/8" OD x 1/8" OD-1pc; 3/16" OD x 3/16" OD-1pc; 1/4" OD x 1/4" OD-1pc; 5/16" OD x 5/16" OD-1pc; 3/8" OD x 3/8" OD-1pc; (5pcs)

More Info

4LIFETIMELINES Brass compression union, 3/16, 10/bag

Search only 4LIFETIMELINES brand name
4LIFETIMELINES Brass compression union, 3/16, 10/bag

Current price: 10.15 USD


Check price and availability


Height: 0.63 Inches

Length: 7 Inches

Width: 4 Inches

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Contains: 1/8" OD x 1/8" OD-1pc; 3/16" OD x 3/16" OD-1pc; 1/4" OD x 1/4" OD-1pc; 5/16" OD x 5/16" OD-1pc; 3/8" OD x 3/8" OD-1pc; (5pcs)
  • Lifetime warranty included on all products purchased from 4Lifetimelines
  • Suitable for brake hydraulic line union
  • Made of durable brass which is resistant to corrosion from salt that can be used on roads in the winter
  • Our brake line unions are made with unmatched superior quality
  • High quality brass for leak-proof reliability

More Info

Brennan 2408-04 Steel JIC Flared Tube Fitting, Plug, 1/4"

Search only brennan brand name
Brennan 2408-04 Steel JIC Flared Tube Fitting, Plug, 1/4

Current price: 4.69 USD


Check price and availability


Weight: 0.03 Pounds

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Contains: 1/8" OD x 1/8" OD-1pc; 3/16" OD x 3/16" OD-1pc; 1/4" OD x 1/4" OD-1pc; 5/16" OD x 5/16" OD-1pc; 3/8" OD x 3/8" OD-1pc; (5pcs)
  • Lifetime warranty included on all products purchased from 4Lifetimelines
  • Suitable for brake hydraulic line union
  • Made of durable brass which is resistant to corrosion from salt that can be used on roads in the winter
  • Our brake line unions are made with unmatched superior quality
  • High quality brass for leak-proof reliability
  • Meets SAE standard J514 for quality assurance
  • Operating temperature ranges from -63 to 400 degrees F
  • Made of steel for greater rust resistance than iron
  • Fitting has a JIC flared male connector for connecting to a female JIC pipe
  • Cap for closing the end of a pipe or fitting

More Info

uxcell Stainless Steel Compression Tube Fitting 1/8NPT Male x 3 Tube OD

Search only uxcell brand name
uxcell Stainless Steel Compression Tube Fitting 1/8NPT Male x 3 Tube OD

Current price: 5.99 USD


Check price and availability


Height: 1.97 Inches

Length: 1.97 Inches

Width: 1.97 Inches

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Contains: 1/8" OD x 1/8" OD-1pc; 3/16" OD x 3/16" OD-1pc; 1/4" OD x 1/4" OD-1pc; 5/16" OD x 5/16" OD-1pc; 3/8" OD x 3/8" OD-1pc; (5pcs)
  • Lifetime warranty included on all products purchased from 4Lifetimelines
  • Suitable for brake hydraulic line union
  • Made of durable brass which is resistant to corrosion from salt that can be used on roads in the winter
  • Our brake line unions are made with unmatched superior quality
  • High quality brass for leak-proof reliability
  • Meets SAE standard J514 for quality assurance
  • Operating temperature ranges from -63 to 400 degrees F
  • Made of steel for greater rust resistance than iron
  • Fitting has a JIC flared male connector for connecting to a female JIC pipe
  • Cap for closing the end of a pipe or fitting
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/8 NPT MALE x Ф3 TUBE OD】Tube OD : Ф3 ; Male Dia : NPT1/8 ; Ferrule Mini Inner Dia : 3mm/0.12inch

More Info

uxcell Stainless Steel Compression Tube Fitting 1/4NPT Male x 10 Tube OD 3pcs

Search only uxcell brand name
uxcell Stainless Steel Compression Tube Fitting 1/4NPT Male x 10 Tube OD 3pcs

Current price: 12.99 USD


Check price and availability


Height: 1.97 Inches

Length: 1.97 Inches

Width: 1.97 Inches

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Contains: 1/8" OD x 1/8" OD-1pc; 3/16" OD x 3/16" OD-1pc; 1/4" OD x 1/4" OD-1pc; 5/16" OD x 5/16" OD-1pc; 3/8" OD x 3/8" OD-1pc; (5pcs)
  • Lifetime warranty included on all products purchased from 4Lifetimelines
  • Suitable for brake hydraulic line union
  • Made of durable brass which is resistant to corrosion from salt that can be used on roads in the winter
  • Our brake line unions are made with unmatched superior quality
  • High quality brass for leak-proof reliability
  • Meets SAE standard J514 for quality assurance
  • Operating temperature ranges from -63 to 400 degrees F
  • Made of steel for greater rust resistance than iron
  • Fitting has a JIC flared male connector for connecting to a female JIC pipe
  • Cap for closing the end of a pipe or fitting
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/8 NPT MALE x Ф3 TUBE OD】Tube OD : Ф3 ; Male Dia : NPT1/8 ; Ferrule Mini Inner Dia : 3mm/0.12inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/4 NPT MALE x Ф10 TUBE OD】Tube OD : Ф10 ; Male Dia : NPT1/4 ; Ferrule Mini Inner Dia : 10mm/0.39inch

More Info

Brass Inverted Flare Fitting Tube Nut, Brake Line Plug, 5/16" OD, 5pcs

Search only Meichi brand name
Brass Inverted Flare Fitting Tube Nut, Brake Line Plug, 5/16

Current price: 8.99 USD


Check price and availability


  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Contains: 1/8" OD x 1/8" OD-1pc; 3/16" OD x 3/16" OD-1pc; 1/4" OD x 1/4" OD-1pc; 5/16" OD x 5/16" OD-1pc; 3/8" OD x 3/8" OD-1pc; (5pcs)
  • Lifetime warranty included on all products purchased from 4Lifetimelines
  • Suitable for brake hydraulic line union
  • Made of durable brass which is resistant to corrosion from salt that can be used on roads in the winter
  • Our brake line unions are made with unmatched superior quality
  • High quality brass for leak-proof reliability
  • Meets SAE standard J514 for quality assurance
  • Operating temperature ranges from -63 to 400 degrees F
  • Made of steel for greater rust resistance than iron
  • Fitting has a JIC flared male connector for connecting to a female JIC pipe
  • Cap for closing the end of a pipe or fitting
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/8 NPT MALE x Ф3 TUBE OD】Tube OD : Ф3 ; Male Dia : NPT1/8 ; Ferrule Mini Inner Dia : 3mm/0.12inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/4 NPT MALE x Ф10 TUBE OD】Tube OD : Ф10 ; Male Dia : NPT1/4 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
  • Not for use in potable drinking water applications
  • For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Tube nut for use with inverted flared tubing

More Info

Brennan 6408-08-O-SS, Stainless Steel Tube Fitting, Hex Plug , 1/2" Tube OD, 3/4"-16 O-ring Boss Thread

Search only brennan brand name
Brennan 6408-08-O-SS, Stainless Steel Tube Fitting, Hex Plug , 1/2

Current price: 7.63 USD


Check price and availability


Weight: 0.000625 Pounds

  • Temp. range: -65 to 250 Degree F ; 1000 PSI Maximum pressure
  • Meets functional requirements of SAE J512
  • Constructed from forged brass
  • Used with brass, copper, iron tubing (1/4" tube O.D.) for closing a male pipe or fitting end
  • Tube Size (Nominal Pipe Size): 1/4 Inch ; Flare Thread Size: 7/16-20 ; Actual Inside Diameter (Female Flare Thread I.D.): 0.39 Inch (13/32 Inch)
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/4 TUBE OD】Tube OD : Ф3/4 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 19mm/0.75inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Contains: 1/8" OD x 1/8" OD-1pc; 3/16" OD x 3/16" OD-1pc; 1/4" OD x 1/4" OD-1pc; 5/16" OD x 5/16" OD-1pc; 3/8" OD x 3/8" OD-1pc; (5pcs)
  • Lifetime warranty included on all products purchased from 4Lifetimelines
  • Suitable for brake hydraulic line union
  • Made of durable brass which is resistant to corrosion from salt that can be used on roads in the winter
  • Our brake line unions are made with unmatched superior quality
  • High quality brass for leak-proof reliability
  • Meets SAE standard J514 for quality assurance
  • Operating temperature ranges from -63 to 400 degrees F
  • Made of steel for greater rust resistance than iron
  • Fitting has a JIC flared male connector for connecting to a female JIC pipe
  • Cap for closing the end of a pipe or fitting
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/8 NPT MALE x Ф3 TUBE OD】Tube OD : Ф3 ; Male Dia : NPT1/8 ; Ferrule Mini Inner Dia : 3mm/0.12inch
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/4 NPT MALE x Ф10 TUBE OD】Tube OD : Ф10 ; Male Dia : NPT1/4 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
  • Not for use in potable drinking water applications
  • For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Tube nut for use with inverted flared tubing
  • Item Package weight : 0.1 pounds
  • The Package Height of the Product is 2.54 centimeters
  • The Package Width of the Product is 0.508 centimeters
  • The Package Length of the Product is 5.08 centimeters

More Info

1    2    3    4    5    6    7    8    9    10