Best Hydraulic Tube Compression Fittings. Reviews October, 2020

Joywayus 50pcs Brass Compression Fitting Sleeves Ferrule Ring for 4mm Tube

Search only Joywayus brand name
Joywayus 50pcs Brass Compression Fitting Sleeves Ferrule Ring for 4mm Tube

Current price: 8.98 USD


Check price and availability


  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.

More Info

uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD 3pcs

Search only uxcell brand name
uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD 3pcs

Current price: 15.79 USD


Check price and availability


Height: 1.97 Inches

Length: 1.97 Inches

Width: 1.97 Inches

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch

More Info

Metalwork Metric Nickel Plated Brass Compression Tube Fitting, Union, Double Sleeve Straight Connector (10mm OD x 10mm OD, Pack of 2)

Search only Metalwork brand name
Metalwork Metric Nickel Plated Brass Compression Tube Fitting, Union, Double Sleeve Straight Connector (10mm OD x 10mm OD, Pack of 2)

Current price: 8.99 USD


Check price and availability


  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing

More Info

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16" Tube OD (Pack of 30)

Search only Quickun brand name
Quickun Brass Compression Fitting Ferrule Sleeve, 3/16

Current price: 6.99 USD


Check price and availability


  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C)
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems.
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing.
  • Size:3/16" Tube OD

More Info

5/16" Compression Union Brass Tube Fitting, 5/16" OD x 5/16" OD, 5pcs

Search only MeiChi brand name
5/16

Current price: 12.99 USD


Check price and availability


  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C)
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems.
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing.
  • Size:3/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Size: 5/16" Tube OD x 5/16" Tube OD

More Info

Anderson Metals - 54046-0608 Brass Tube Fitting, Coupling, 3/8" Flare x 1/2" Female Pipe

Search only Anderson Metals brand name
Anderson Metals - 54046-0608 Brass Tube Fitting, Coupling, 3/8

Current price: 4.8 USD


Check price and availability


Height: 5 Inches

Length: 9 Inches

Width: 8 Inches

Weight: 0.25 Pounds

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C)
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems.
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing.
  • Size:3/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Size: 5/16" Tube OD x 5/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter

More Info

Metalwork 304 Stainless Steel Compression Tube Fitting Adapter 1/8" NPT Male x 6mm Tube OD, W/Double Ferrules (2 Pcs)

Search only Metalwork brand name
Metalwork 304 Stainless Steel Compression Tube Fitting Adapter 1/8

Current price: 8.99 USD


Check price and availability


  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C)
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems.
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing.
  • Size:3/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Size: 5/16" Tube OD x 5/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • Applicable medium: oil, water, gas and other non-corrosive or corrosive medium.
  • Operating temperatures: below 450℃/ Working pressure: 25Mpa-40Mpa
  • Type 304 stainless steel for higher strength and greater corrosion resistance
  • Fitting connects to tubing on one end and has an NPT male connector on the other
  • Adapter for connecting pipes or fittings of different types

More Info

Dixon 62C-06 Brass Compression Tube Fitting, Union, 3/8" Tube OD

Search only Dixon brand name
Dixon 62C-06 Brass Compression Tube Fitting, Union, 3/8

Current price: 7.27 USD


Check price and availability


Weight: 0.000625 Pounds

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C)
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems.
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing.
  • Size:3/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Size: 5/16" Tube OD x 5/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • Applicable medium: oil, water, gas and other non-corrosive or corrosive medium.
  • Operating temperatures: below 450℃/ Working pressure: 25Mpa-40Mpa
  • Type 304 stainless steel for higher strength and greater corrosion resistance
  • Fitting connects to tubing on one end and has an NPT male connector on the other
  • Adapter for connecting pipes or fittings of different types
  • Meets SAE J512 and ASA standards for functional requirements and is UL listed for flammable liquid
  • For low to medium pressure operating environments with no excessive vibration or tube movement
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to tubing on both ends
  • Union for connecting and disconnecting two tubes more easily than with a coupling

More Info

Legines Brass Compression Fitting Female Coupling Adapter 1/4" Tube OD x 1/8" NPT Female Pack of 2

Search only Legines brand name
Legines Brass Compression Fitting Female Coupling Adapter 1/4

Current price: 5.99 USD


Check price and availability


Height: 4.330708657 Inches

Length: 5.118110231 Inches

Width: 1.968503935 Inches

Weight: 0.0881849048 Pounds

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C)
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems.
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing.
  • Size:3/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Size: 5/16" Tube OD x 5/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • Applicable medium: oil, water, gas and other non-corrosive or corrosive medium.
  • Operating temperatures: below 450℃/ Working pressure: 25Mpa-40Mpa
  • Type 304 stainless steel for higher strength and greater corrosion resistance
  • Fitting connects to tubing on one end and has an NPT male connector on the other
  • Adapter for connecting pipes or fittings of different types
  • Meets SAE J512 and ASA standards for functional requirements and is UL listed for flammable liquid
  • For low to medium pressure operating environments with no excessive vibration or tube movement
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to tubing on both ends
  • Union for connecting and disconnecting two tubes more easily than with a coupling
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Female Compression Connector.
  • Three piece construction - nut, sleeve and body with attached insert

More Info

Hydraulic Fitting Compression 10mm Tube OD to M10 M10X1 M10X1.0 Male Metric

Search only DYNAPEX brand name
Hydraulic Fitting Compression 10mm Tube OD to M10 M10X1 M10X1.0 Male Metric

Current price: 8.99 USD


Check price and availability


Weight: 0.075 Pounds

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
  • Connects to 4mm copper,brass,aluminum,or plastic tubing.
  • This Joywayus compression fitting is made of brass.
  • Sleeve for a tube compression fitting.
  • No flaring tool required for assembly.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Safe and reliable, Nickel plated brass construction
  • Installation and maintenance convenient
  • Seal ability and good repeatability, Easy to disassemble no flaring tool required
  • High Pressure Resistance, Temperature Resistance
  • Three piece construction - nut, sleeve and body with attached insert Use with copper, brass, aluminum, or plastic tubing
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C)
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems.
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing.
  • Size:3/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts.
  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required.
  • Size: 5/16" Tube OD x 5/16" Tube OD
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • Applicable medium: oil, water, gas and other non-corrosive or corrosive medium.
  • Operating temperatures: below 450℃/ Working pressure: 25Mpa-40Mpa
  • Type 304 stainless steel for higher strength and greater corrosion resistance
  • Fitting connects to tubing on one end and has an NPT male connector on the other
  • Adapter for connecting pipes or fittings of different types
  • Meets SAE J512 and ASA standards for functional requirements and is UL listed for flammable liquid
  • For low to medium pressure operating environments with no excessive vibration or tube movement
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Connects to tubing on both ends
  • Union for connecting and disconnecting two tubes more easily than with a coupling
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Easy to disassemble no flaring tool required
  • Standard fittings use short nuts
  • Female Compression Connector.
  • Three piece construction - nut, sleeve and body with attached insert
  • Package Quantity: 1
  • Material: Blacken Steel
  • Thread End: M10X1.0 Male
  • Compression End: 10mm OD Tube

More Info

1    2    3    4    5    6    7    8    9    10