Best Hydraulic Tube Luer to barbed Cap Fittings. Reviews November, 2020

2-Pack in-Line Barbed Ball Valve 16mm for 1/2 and 5/8 Inch Tubing (.570 to .620 ID) - Regulate and Shut-Off/On Water Flow

Search only Habitech brand name
2-Pack in-Line Barbed Ball Valve 16mm for 1/2 and 5/8 Inch Tubing (.570 to .620 ID) - Regulate and Shut-Off/On Water Flow

Current price: 11.96 USD

Saving: $1.49 (11%)


Check price and availability


Height: 1.5 Inches

Length: 3.25 Inches

Width: 1 Inches

  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.

More Info

One Stop Outdoor (10-Pack) Drip Irrigation Tubing End Cap Plug - 1/2" Universal Perma Connector Barbed Locking Fitting - Fits All Brands 16-17mm Drip Tape AG Tubing (10, End Cap)

Search only One Stop Outdoor brand name
One Stop Outdoor (10-Pack) Drip Irrigation Tubing End Cap Plug - 1/2

Current price: 11.99 USD


Check price and availability


Height: 1.5 Inches

Length: 4 Inches

Width: 5 Inches

  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI

More Info

64 Pcs. Hydraulic NPT Pipe Fittings Cap & Plug Adapter Assortment Kit

Search only AQUAAULOS brand name
64 Pcs. Hydraulic NPT Pipe Fittings Cap & Plug Adapter Assortment Kit

Current price: 59.95 USD


Check price and availability


  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit

More Info

NPT Hydraulic Pipe Cap and Plug Kit. 64 Piece #4 to #16

Search only A&F brand name
NPT Hydraulic Pipe Cap and Plug Kit. 64 Piece #4 to #16

Current price: 67.5 USD


Check price and availability


Weight: 9 Pounds

  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit

More Info

One Stop Outdoor (20-Pack) Drip Irrigation Black Figure 8 End Caps Barbed Fittings - Fits 1/2”, 17mm .600” ID Drip Tubing - Made in The USA (Figure 8 End 20 Pack)

Search only One Stop Outdoor brand name
One Stop Outdoor (20-Pack) Drip Irrigation Black Figure 8 End Caps Barbed Fittings - Fits 1/2”, 17mm .600” ID Drip Tubing - Made in The USA (Figure 8 End 20 Pack)

Current price: 9.5 USD


Check price and availability


  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit
  • EASY INSTALLATION - No glue or clamps needed!
  • MADE IN THE USA - Proudly Manufactured in the USA!
  • FIT / FUNCTION - Use to reconfigure and connect - 1/2" drip tubing or drip line with .550 ID to .600 ID
  • OPERATING PRESSURE - Up to 30 PSI (please check and regulate your water pressure to prevent leaks or blowouts!)
  • QUALITY - Premium quality UV resistant 1/2 Inch, 17mm Figure 8 End Caps

More Info

2 Sets of 1/2" NPT Hydraulic Quick Connect Couplings Ball Fitting Female and Male with Dust Caps Compatible Parker 6600 Series

Search only AKJia Electronics brand name
2 Sets of 1/2

Current price: 33.95 USD


Check price and availability


Height: 1.968503935 Inches

Length: 6.8897637725 Inches

Width: 3.93700787 Inches

  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit
  • EASY INSTALLATION - No glue or clamps needed!
  • MADE IN THE USA - Proudly Manufactured in the USA!
  • FIT / FUNCTION - Use to reconfigure and connect - 1/2" drip tubing or drip line with .550 ID to .600 ID
  • OPERATING PRESSURE - Up to 30 PSI (please check and regulate your water pressure to prevent leaks or blowouts!)
  • QUALITY - Premium quality UV resistant 1/2 Inch, 17mm Figure 8 End Caps
  • Compatible with Parker hydraulic quick coupling 6600 Series, Faster hydraulic quick coupling ANV Series, Aeroquip 5600 Series and Hansen HA 15000 Series
  • Carbon Steel Material can work at a pressure at 27.6 Mpa, and designed a high flow of 45.5 L/min, the material are hardened for durability.
  • Poppet Valves - super good performance on prevent uncoupled leakage. When the coupling disconnects, the poppet valves disconnect and stop liquid leakage.
  • Ball-locking Structure make this GT-A1 series connect or disconnect super quickly, stable and reliable.
  • The GT-A1 Series are widely used in industries, use on construction equipment, forestry equipment, oil tools, gas industries, steel mill machinery and other demanding hydraulic applications.

More Info

Blue GL45 Safety Cap with Two Holes for 1/4 Inch OD Tubing, GL-45 Cap Fitting Feed, Bottle Adapter, Bottle Cap Assembly (Pack of 5 Sets)

Search only Genesee Science brand name
Blue GL45 Safety Cap with Two Holes for 1/4 Inch OD Tubing, GL-45 Cap Fitting Feed, Bottle Adapter, Bottle Cap Assembly (Pack of 5 Sets)

Current price: 69 USD


Check price and availability


  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit
  • EASY INSTALLATION - No glue or clamps needed!
  • MADE IN THE USA - Proudly Manufactured in the USA!
  • FIT / FUNCTION - Use to reconfigure and connect - 1/2" drip tubing or drip line with .550 ID to .600 ID
  • OPERATING PRESSURE - Up to 30 PSI (please check and regulate your water pressure to prevent leaks or blowouts!)
  • QUALITY - Premium quality UV resistant 1/2 Inch, 17mm Figure 8 End Caps
  • Compatible with Parker hydraulic quick coupling 6600 Series, Faster hydraulic quick coupling ANV Series, Aeroquip 5600 Series and Hansen HA 15000 Series
  • Carbon Steel Material can work at a pressure at 27.6 Mpa, and designed a high flow of 45.5 L/min, the material are hardened for durability.
  • Poppet Valves - super good performance on prevent uncoupled leakage. When the coupling disconnects, the poppet valves disconnect and stop liquid leakage.
  • Ball-locking Structure make this GT-A1 series connect or disconnect super quickly, stable and reliable.
  • The GT-A1 Series are widely used in industries, use on construction equipment, forestry equipment, oil tools, gas industries, steel mill machinery and other demanding hydraulic applications.
  • Two 1/4 inch OD holes for tubings of various materials, TPE or silicone
  • Silicone adapter is elastic and seals both bottle and tubings tight
  • High temperature resistant silicone adapter, chemically insert, cell culture friendly
  • Cap Material: Polypropylene
  • Fit GL 45 bottle, compatible with PYREX, Chemglass GL-45 bottle, caps,

More Info

Parker 640QSF-4-pk5 Refrigeration Access Valve, Flare Cap, Brass, SAE Male Flare Quick Seal Cap, 1/4" (Pack of 5)

Search only Parker brand name
Parker 640QSF-4-pk5 Refrigeration Access Valve, Flare Cap, Brass, SAE Male Flare Quick Seal Cap, 1/4

Current price: 15.58 USD


Check price and availability


  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit
  • EASY INSTALLATION - No glue or clamps needed!
  • MADE IN THE USA - Proudly Manufactured in the USA!
  • FIT / FUNCTION - Use to reconfigure and connect - 1/2" drip tubing or drip line with .550 ID to .600 ID
  • OPERATING PRESSURE - Up to 30 PSI (please check and regulate your water pressure to prevent leaks or blowouts!)
  • QUALITY - Premium quality UV resistant 1/2 Inch, 17mm Figure 8 End Caps
  • Compatible with Parker hydraulic quick coupling 6600 Series, Faster hydraulic quick coupling ANV Series, Aeroquip 5600 Series and Hansen HA 15000 Series
  • Carbon Steel Material can work at a pressure at 27.6 Mpa, and designed a high flow of 45.5 L/min, the material are hardened for durability.
  • Poppet Valves - super good performance on prevent uncoupled leakage. When the coupling disconnects, the poppet valves disconnect and stop liquid leakage.
  • Ball-locking Structure make this GT-A1 series connect or disconnect super quickly, stable and reliable.
  • The GT-A1 Series are widely used in industries, use on construction equipment, forestry equipment, oil tools, gas industries, steel mill machinery and other demanding hydraulic applications.
  • Two 1/4 inch OD holes for tubings of various materials, TPE or silicone
  • Silicone adapter is elastic and seals both bottle and tubings tight
  • High temperature resistant silicone adapter, chemically insert, cell culture friendly
  • Cap Material: Polypropylene
  • Fit GL 45 bottle, compatible with PYREX, Chemglass GL-45 bottle, caps,
  • Access valves with pipe connections have internal ods solder cups
  • Tees and crosses machined to receive an access core in all 1/4" sae flare ends
  • Machined in accordance with ari 720
  • Low cost
  • All brass construction

More Info

3/8" NPT Thread ISO7241-B Hydraulic Quick Connect Coupler Set with Dust Caps

Search only AKJia Electronics brand name
3/8

Current price: 18.58 USD


Check price and availability


Height: 2.35 Inches

Length: 3.07 Inches

Width: 3.07 Inches

Weight: 0.74 Pounds

  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit
  • EASY INSTALLATION - No glue or clamps needed!
  • MADE IN THE USA - Proudly Manufactured in the USA!
  • FIT / FUNCTION - Use to reconfigure and connect - 1/2" drip tubing or drip line with .550 ID to .600 ID
  • OPERATING PRESSURE - Up to 30 PSI (please check and regulate your water pressure to prevent leaks or blowouts!)
  • QUALITY - Premium quality UV resistant 1/2 Inch, 17mm Figure 8 End Caps
  • Compatible with Parker hydraulic quick coupling 6600 Series, Faster hydraulic quick coupling ANV Series, Aeroquip 5600 Series and Hansen HA 15000 Series
  • Carbon Steel Material can work at a pressure at 27.6 Mpa, and designed a high flow of 45.5 L/min, the material are hardened for durability.
  • Poppet Valves - super good performance on prevent uncoupled leakage. When the coupling disconnects, the poppet valves disconnect and stop liquid leakage.
  • Ball-locking Structure make this GT-A1 series connect or disconnect super quickly, stable and reliable.
  • The GT-A1 Series are widely used in industries, use on construction equipment, forestry equipment, oil tools, gas industries, steel mill machinery and other demanding hydraulic applications.
  • Two 1/4 inch OD holes for tubings of various materials, TPE or silicone
  • Silicone adapter is elastic and seals both bottle and tubings tight
  • High temperature resistant silicone adapter, chemically insert, cell culture friendly
  • Cap Material: Polypropylene
  • Fit GL 45 bottle, compatible with PYREX, Chemglass GL-45 bottle, caps,
  • Access valves with pipe connections have internal ods solder cups
  • Tees and crosses machined to receive an access core in all 1/4" sae flare ends
  • Machined in accordance with ari 720
  • Low cost
  • All brass construction
  • recommended for general purpose, machine tools, mobile hydraulics, and other equipment applications,aerospace, automotive, electronics industries,
  • Interchangeable Faster HNV Series Parker 60 Series Safeway S10 Series Snap-tite 72 series Eaton HK Series
  • double shut-off poppet style valving with captive poppet seal provides a durable , guaranteed leak-free seal.
  • Self-sealing poppet valves provide excellent high and low pressure sealing
  • meet dimensional requirements to ISO standard 7241-1 Series B

More Info

Avanty Push in to Connect Tubing Quick Cap Plug Fitting, 8mm OD (Pack of 20)

Search only Avanty brand name
Avanty Push in to Connect Tubing Quick Cap Plug Fitting, 8mm OD (Pack of 20)

Current price: 14.99 USD


Check price and availability


  • LEAK-FREE SEAL. These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be heat, chemical and wear-resistant assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart.
  • VERSATILE. Customize a secondary water zone, create individual drip-line control within your drip irrigation system, use as tank valves, drain valves, pex valves, return valves, drip irrigation valve or in any situation where fluid restriction is needed. Additional uses for this shut off ball valve include pond water applications, aquarium plumbing, RV camper and trailers, pump return line, canister filter, protein skimmer, calcium reactor, phosban reactor, saltwater applications, aquaponics.
  • FULLY ADJUSTABLE. Adjust the barb valve anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves.
  • COMPLETE FLOW CONTROL. Inline ball valves (2 Pack) for 1/2 and 5/8 inch irrigation tubing are the perfect way to regulate the water flow of your aquatic, hydroponic, or drip irrigation systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow. This 16mm valve works with 1/2" Irrigation Tubing from .570 to .620 ID (Inner Diameter).
  • ▶ IMPORTANT ◀ BE SURE TO CHECK THE SIZES and BUY the RIGHT VALVE. THIS 16MM VALVE WORKS WITH 1/2" DRIP IRRIGATION TUBING FROM .570 to .620 INSIDE DIAMETER (ID). If you would like to use 1/2" tubing that has an ID of .520, then select the 13mm size valve instead. Please note there is no standard sizing for drip irrigation tubing in the USA, so be sure to check the inside diameter of your tubing to select the compatible valve size.
  • LOCKING FIT: Barbed ends grab tubing for a secure leak-proof connection & the twist lock adds extra hold to the tubing for a secure connection every time!
  • USE: Cap off the end of a tubing run. Connect and configure drip irrigation tubing to your desired layout. Allows creation of a custom layout for your planting area.
  • MATERIAL: Constructed of highly durable UV and chemical-resistant materials to assure long life
  • UNIVERSAL FIT END CAP PLUG: Fits all brands 16 & 17mm Drip Tape Tubing!
  • INCOMING PRESSURE: 30 PSI
  • Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
  • High Quality Carbon Steel NPT Cap & Plug Fittings Kit
  • EASY INSTALLATION - No glue or clamps needed!
  • MADE IN THE USA - Proudly Manufactured in the USA!
  • FIT / FUNCTION - Use to reconfigure and connect - 1/2" drip tubing or drip line with .550 ID to .600 ID
  • OPERATING PRESSURE - Up to 30 PSI (please check and regulate your water pressure to prevent leaks or blowouts!)
  • QUALITY - Premium quality UV resistant 1/2 Inch, 17mm Figure 8 End Caps
  • Compatible with Parker hydraulic quick coupling 6600 Series, Faster hydraulic quick coupling ANV Series, Aeroquip 5600 Series and Hansen HA 15000 Series
  • Carbon Steel Material can work at a pressure at 27.6 Mpa, and designed a high flow of 45.5 L/min, the material are hardened for durability.
  • Poppet Valves - super good performance on prevent uncoupled leakage. When the coupling disconnects, the poppet valves disconnect and stop liquid leakage.
  • Ball-locking Structure make this GT-A1 series connect or disconnect super quickly, stable and reliable.
  • The GT-A1 Series are widely used in industries, use on construction equipment, forestry equipment, oil tools, gas industries, steel mill machinery and other demanding hydraulic applications.
  • Two 1/4 inch OD holes for tubings of various materials, TPE or silicone
  • Silicone adapter is elastic and seals both bottle and tubings tight
  • High temperature resistant silicone adapter, chemically insert, cell culture friendly
  • Cap Material: Polypropylene
  • Fit GL 45 bottle, compatible with PYREX, Chemglass GL-45 bottle, caps,
  • Access valves with pipe connections have internal ods solder cups
  • Tees and crosses machined to receive an access core in all 1/4" sae flare ends
  • Machined in accordance with ari 720
  • Low cost
  • All brass construction
  • recommended for general purpose, machine tools, mobile hydraulics, and other equipment applications,aerospace, automotive, electronics industries,
  • Interchangeable Faster HNV Series Parker 60 Series Safeway S10 Series Snap-tite 72 series Eaton HK Series
  • double shut-off poppet style valving with captive poppet seal provides a durable , guaranteed leak-free seal.
  • Self-sealing poppet valves provide excellent high and low pressure sealing
  • meet dimensional requirements to ISO standard 7241-1 Series B
  • Working Pressure: 0-990Kpa;
  • Operation Temperature: 0-70℃;
  • Negative pressure: -100 Kpa;
  • Working Pressure: 0-990Kpa;
  • Fluid medium: Compressed air, vacuum;

More Info

1    2    3    4    5    6