Best Hydraulic Tube Luer to threaded Elbow Fittings. Reviews November, 2020

Parker Hannifin P8ME8-pk5 Fast and Tite Male Elbow Fitting, Polypropylene, 90 Degree Angle, 1/2" Compression Tube x 1/2" Male NPTF, Black (Pack of 5)

Search only Parker Hannifin brand name
Parker Hannifin P8ME8-pk5 Fast and Tite Male Elbow Fitting, Polypropylene, 90 Degree Angle, 1/2

Current price: 22.79 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools

More Info

John Guest Acetal Copolymer Tube Fitting, Plug-In 90 Degree Elbow, 1/4" Tube OD x 1/4" Stem OD (Pack of 10)

Search only John Guest brand name
John Guest Acetal Copolymer Tube Fitting, Plug-In 90 Degree Elbow, 1/4

Current price: 20 USD

Saving: $2.80 (12%)


Check price and availability


Height: 1 Inches

Length: 4.7 Inches

Width: 2 Inches

Weight: 0.05 Pounds

  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle

More Info

Push to Connect Air Fittings 1/4 inch OD Tubing x 1/8" Npt Elbow Air Line Quick Connect Fittings Male Threaded 90 Degree Push in Lock Fittings Pneumatic Tube Fittings Connectors 5Packs

Search only CEKER brand name
Push to Connect Air Fittings 1/4 inch OD Tubing x 1/8

Current price: 12.99 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility

More Info

Beduan Push to Connect Fitting Elbow, 1/2" Tube OD x 1/2“ Tube OD Pneumatic 90 Degree Elbow Adapter Push Lock Fitting ( Pack of 10 )

Search only beduan brand name
Beduan Push to Connect Fitting Elbow, 1/2

Current price: 13.99 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Type:Push in fitting/Push to connect /Size:1/2" Elbow Connector

More Info

QWORK Quick Tube Connect Fittings, Tube Fitting with Quick Rigid Elbow, Water Filter Fitting, 1/4" Tube OD x 1/4" NPTF Male (Pack of 10)

Search only QWORK brand name
QWORK Quick Tube Connect Fittings, Tube Fitting with Quick Rigid Elbow, Water Filter Fitting, 1/4

Current price: 11.99 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Type:Push in fitting/Push to connect /Size:1/2" Elbow Connector
  • 100% Satisfied Service: Sincerely hope our products could offer you a good experience and some help. Within one month after you purchase this product, you can enjoy a worry-free return or replacement service. And any questions feel free to contact us, we will do our big effrot to help you
  • Maximum Operating Pressure: 150 pounds per square inch (psi)
  • Wide Application: It is a plug-and-play connector with one end connected to a pipe or tubing, and the other end has a National Pipe Taper Fuel (NPTF) male connector
  • Main Point: The rigid elbow fitting connects two pipes at an angle to change the flow direction between the pipes
  • Excellent Material: Made of acetal copolymer plastic -Polyoxymethylene (POM) which is an engineering plastic with excellent performance. It has a tensile strength of 70 MPa, low water absorption, and is dimensionally stable as well as it has great thermal strength, bending strength, fatigue resistance, wear resistance and electrical properties, so it could support long-term use

More Info

25-Pack - 1/2" Compression Elbow, drip Irrigation 90 Degree Connector Fitting Fits Drip Tubing Size .700.704 & .690 OD

Search only DIG brand name
25-Pack - 1/2

Current price: 18.89 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Type:Push in fitting/Push to connect /Size:1/2" Elbow Connector
  • 100% Satisfied Service: Sincerely hope our products could offer you a good experience and some help. Within one month after you purchase this product, you can enjoy a worry-free return or replacement service. And any questions feel free to contact us, we will do our big effrot to help you
  • Maximum Operating Pressure: 150 pounds per square inch (psi)
  • Wide Application: It is a plug-and-play connector with one end connected to a pipe or tubing, and the other end has a National Pipe Taper Fuel (NPTF) male connector
  • Main Point: The rigid elbow fitting connects two pipes at an angle to change the flow direction between the pipes
  • Excellent Material: Made of acetal copolymer plastic -Polyoxymethylene (POM) which is an engineering plastic with excellent performance. It has a tensile strength of 70 MPa, low water absorption, and is dimensionally stable as well as it has great thermal strength, bending strength, fatigue resistance, wear resistance and electrical properties, so it could support long-term use
  • Recommended operating pressure: 15 to 35 PSI (25 PSI pressure regulator is recommended)
  • Maximum operating pressure: up to 60 PSI
  • Secure and easy installation without glue or clamps
  • Made with high-impact UV-resistant plastic
  • Fits all polyethylene drip tubing with .690 OD, .700 OD and .704 OD

More Info

One Stop Outdoor (5-Pack) 1/2" Universal Nut-Lock Elbow Drip Irrigation Tubing Compression Fitting Connector (Fits All Tubing 620.700.710 OD) (Elbow 5-Pack)

Search only One Stop Outdoor brand name
One Stop Outdoor (5-Pack) 1/2

Current price: 16.99 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Type:Push in fitting/Push to connect /Size:1/2" Elbow Connector
  • 100% Satisfied Service: Sincerely hope our products could offer you a good experience and some help. Within one month after you purchase this product, you can enjoy a worry-free return or replacement service. And any questions feel free to contact us, we will do our big effrot to help you
  • Maximum Operating Pressure: 150 pounds per square inch (psi)
  • Wide Application: It is a plug-and-play connector with one end connected to a pipe or tubing, and the other end has a National Pipe Taper Fuel (NPTF) male connector
  • Main Point: The rigid elbow fitting connects two pipes at an angle to change the flow direction between the pipes
  • Excellent Material: Made of acetal copolymer plastic -Polyoxymethylene (POM) which is an engineering plastic with excellent performance. It has a tensile strength of 70 MPa, low water absorption, and is dimensionally stable as well as it has great thermal strength, bending strength, fatigue resistance, wear resistance and electrical properties, so it could support long-term use
  • Recommended operating pressure: 15 to 35 PSI (25 PSI pressure regulator is recommended)
  • Maximum operating pressure: up to 60 PSI
  • Secure and easy installation without glue or clamps
  • Made with high-impact UV-resistant plastic
  • Fits all polyethylene drip tubing with .690 OD, .700 OD and .704 OD
  • Threaded nut for easy assembly
  • Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
  • Use with 1/2” to 5/8” drip tubing or drip line!
  • Operating pressure: up to 60 PSI
  • UNIVERSAL : Fits .620 OD, .700 OD and .710 OD drip tubing, and drip line (16 mm and 17 mm)!

More Info

Malida 1/2" Thread Male to 3/8" Tube Elbow Quick Connect for Reverse Osmosis Water (10, L-WY-0403)

Search only Malida brand name
Malida 1/2

Current price: 6.99 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Type:Push in fitting/Push to connect /Size:1/2" Elbow Connector
  • 100% Satisfied Service: Sincerely hope our products could offer you a good experience and some help. Within one month after you purchase this product, you can enjoy a worry-free return or replacement service. And any questions feel free to contact us, we will do our big effrot to help you
  • Maximum Operating Pressure: 150 pounds per square inch (psi)
  • Wide Application: It is a plug-and-play connector with one end connected to a pipe or tubing, and the other end has a National Pipe Taper Fuel (NPTF) male connector
  • Main Point: The rigid elbow fitting connects two pipes at an angle to change the flow direction between the pipes
  • Excellent Material: Made of acetal copolymer plastic -Polyoxymethylene (POM) which is an engineering plastic with excellent performance. It has a tensile strength of 70 MPa, low water absorption, and is dimensionally stable as well as it has great thermal strength, bending strength, fatigue resistance, wear resistance and electrical properties, so it could support long-term use
  • Recommended operating pressure: 15 to 35 PSI (25 PSI pressure regulator is recommended)
  • Maximum operating pressure: up to 60 PSI
  • Secure and easy installation without glue or clamps
  • Made with high-impact UV-resistant plastic
  • Fits all polyethylene drip tubing with .690 OD, .700 OD and .704 OD
  • Threaded nut for easy assembly
  • Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
  • Use with 1/2” to 5/8” drip tubing or drip line!
  • Operating pressure: up to 60 PSI
  • UNIVERSAL : Fits .620 OD, .700 OD and .710 OD drip tubing, and drip line (16 mm and 17 mm)!
  • No tools required,Push fit fittings
  • Standard fitting for water filter systems using 6mm water filter tubing
  • Push In to Connect Water Tube Fitting
  • 1/2" Thread Male to 3/8" Push Fit Tube Quick Connect

More Info

mxuteuk 10pcs 1/4 inch Tube OD Pneumatic Connect Elbow Fittings Tube Push Fit Fittings Tube Fittings Push Lock, Push to Connect Tube Plastic (Elbow) PV-1/4

Search only mxuteuk brand name
mxuteuk 10pcs 1/4 inch Tube OD Pneumatic Connect Elbow Fittings Tube Push Fit Fittings Tube Fittings Push Lock, Push to Connect Tube Plastic (Elbow) PV-1/4

Current price: 12.88 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Type:Push in fitting/Push to connect /Size:1/2" Elbow Connector
  • 100% Satisfied Service: Sincerely hope our products could offer you a good experience and some help. Within one month after you purchase this product, you can enjoy a worry-free return or replacement service. And any questions feel free to contact us, we will do our big effrot to help you
  • Maximum Operating Pressure: 150 pounds per square inch (psi)
  • Wide Application: It is a plug-and-play connector with one end connected to a pipe or tubing, and the other end has a National Pipe Taper Fuel (NPTF) male connector
  • Main Point: The rigid elbow fitting connects two pipes at an angle to change the flow direction between the pipes
  • Excellent Material: Made of acetal copolymer plastic -Polyoxymethylene (POM) which is an engineering plastic with excellent performance. It has a tensile strength of 70 MPa, low water absorption, and is dimensionally stable as well as it has great thermal strength, bending strength, fatigue resistance, wear resistance and electrical properties, so it could support long-term use
  • Recommended operating pressure: 15 to 35 PSI (25 PSI pressure regulator is recommended)
  • Maximum operating pressure: up to 60 PSI
  • Secure and easy installation without glue or clamps
  • Made with high-impact UV-resistant plastic
  • Fits all polyethylene drip tubing with .690 OD, .700 OD and .704 OD
  • Threaded nut for easy assembly
  • Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
  • Use with 1/2” to 5/8” drip tubing or drip line!
  • Operating pressure: up to 60 PSI
  • UNIVERSAL : Fits .620 OD, .700 OD and .710 OD drip tubing, and drip line (16 mm and 17 mm)!
  • No tools required,Push fit fittings
  • Standard fitting for water filter systems using 6mm water filter tubing
  • Push In to Connect Water Tube Fitting
  • 1/2" Thread Male to 3/8" Push Fit Tube Quick Connect
  • Package Content :10pcs x Elbow Push to connect (1/4 inch tube OD fittings)
  • Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
  • Applicable pipe: PU/PA/PE/PVC
  • Fluid Type: Air Only;Working Temperature: 0-60°C | 32~140°F;Proof Pressure: 3.0Mpa| 435psi; Working Pressure: 0-1.0 MPa| 0-150 Psi;
  • Body Style: Elbow

More Info

Parker Hannifin P10ME8-pk5 Fast and Tite Male Elbow Fitting, Polypropylene, 90 Degree Angle, 5/8" Compression Tube x 1/2" Male NPTF, Black (Pack of 5)

Search only Parker Hannifin brand name
Parker Hannifin P10ME8-pk5 Fast and Tite Male Elbow Fitting, Polypropylene, 90 Degree Angle, 5/8

Current price: 24.42 USD


Check price and availability


  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance
  • Working pressure of up to 150 psi
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
  • Push-to-connect fitting connects to pipes or tubing on one end and has a stem connector on the other
  • 90-degree elbow for connecting two pipes or fittings at an angle
  • The release ring of Pneumatic Air Tube 1/4 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape;offering good seal property
  • Easy to install to 1/4 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely
  • The 1/4 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly
  • 1/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing); Applicable: Pipe PU/ PA/ PE/ PVC; Working Temperature: 0-60°C | 32~140°F;Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg
  • Type:1/4 Od x 1/8" Npt Thread Push to Connect Fittings; Body Style: Female 90°Degree Elbow ;Made of quality plastic and stainless steel; corrosion resistance, ductility
  • Working Temperature:0-60°C | 32~140°F/Negative Pressure:-100Kpa | -29.5 In Hg
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Plastic/Body:Plastic(PET)
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
  • Fluid Admitted:Air Vacuum Water (no freezing)
  • Type:Push in fitting/Push to connect /Size:1/2" Elbow Connector
  • 100% Satisfied Service: Sincerely hope our products could offer you a good experience and some help. Within one month after you purchase this product, you can enjoy a worry-free return or replacement service. And any questions feel free to contact us, we will do our big effrot to help you
  • Maximum Operating Pressure: 150 pounds per square inch (psi)
  • Wide Application: It is a plug-and-play connector with one end connected to a pipe or tubing, and the other end has a National Pipe Taper Fuel (NPTF) male connector
  • Main Point: The rigid elbow fitting connects two pipes at an angle to change the flow direction between the pipes
  • Excellent Material: Made of acetal copolymer plastic -Polyoxymethylene (POM) which is an engineering plastic with excellent performance. It has a tensile strength of 70 MPa, low water absorption, and is dimensionally stable as well as it has great thermal strength, bending strength, fatigue resistance, wear resistance and electrical properties, so it could support long-term use
  • Recommended operating pressure: 15 to 35 PSI (25 PSI pressure regulator is recommended)
  • Maximum operating pressure: up to 60 PSI
  • Secure and easy installation without glue or clamps
  • Made with high-impact UV-resistant plastic
  • Fits all polyethylene drip tubing with .690 OD, .700 OD and .704 OD
  • Threaded nut for easy assembly
  • Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
  • Use with 1/2” to 5/8” drip tubing or drip line!
  • Operating pressure: up to 60 PSI
  • UNIVERSAL : Fits .620 OD, .700 OD and .710 OD drip tubing, and drip line (16 mm and 17 mm)!
  • No tools required,Push fit fittings
  • Standard fitting for water filter systems using 6mm water filter tubing
  • Push In to Connect Water Tube Fitting
  • 1/2" Thread Male to 3/8" Push Fit Tube Quick Connect
  • Package Content :10pcs x Elbow Push to connect (1/4 inch tube OD fittings)
  • Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
  • Applicable pipe: PU/PA/PE/PVC
  • Fluid Type: Air Only;Working Temperature: 0-60°C | 32~140°F;Proof Pressure: 3.0Mpa| 435psi; Working Pressure: 0-1.0 MPa| 0-150 Psi;
  • Body Style: Elbow
  • Hand tight assembly
  • Fda compliant, nsf-51
  • Nitrile O-ring for positive seal
  • 302 stainless steel grab ring for tube retention
  • Installs in seconds without tools

More Info

1    2    3    4    5    6