Best Hydraulic Tube Quick connect to threaded Fittings. Reviews November, 2020

Anderson Metals 54048-0604 Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe

Search only Anderson Metals brand name
Anderson Metals 54048-0604 Brass Tube Fitting, Half-Union, 3/8

Current price: 6.36 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 0.05 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling

More Info

Legines Brass Bulkhead Fitting 1/4" NPT Female Bulk Head Pipe Fitting Bulkhead Coupling(3/4-16UNF) 0.98" Male, 15/16" Length (Pack of 2)

Search only Legines brand name
Legines Brass Bulkhead Fitting 1/4

Current price: 13.99 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead

More Info

Eaton Weatherhead 1868X4 Brass CA360 D.O.T. Air Brake Tube Fitting, Male Connector, 1/8" NPT Male x 1/4" Tube OD

Search only Weatherhead brand name
Eaton Weatherhead 1868X4 Brass CA360 D.O.T. Air Brake Tube Fitting, Male Connector, 1/8

Current price: 4.28 USD


Check price and availability


Height: 0.3 Inches

Length: 2 Inches

Width: 1 Inches

Weight: 0.01 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles

More Info

Anderson Metals - 54046-0604 Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe

Search only Anderson Metals brand name
Anderson Metals - 54046-0604 Brass Tube Fitting, Coupling, 3/8

Current price: 9.55 USD


Check price and availability


Height: 0.6 Inches

Length: 1.2 Inches

Width: 0.6 Inches

Weight: 0.05 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter

More Info

PureSec 2020 Float Valve 1/8" Female Thread Adjustable Shut Off Valve 1/4"&3/8" RO Tube Compatible Valve for Water Purification and RO System

Search only PureSec brand name
PureSec 2020 Float Valve 1/8

Current price: 6.98 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • ★Notes: Our fittings can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)
  • ★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required.
  • ★FUNCTION&QUALITY: A quick connect fitting is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality.
  • ★SIZE &TUBE COMPATIBLE WITH: Requires 5/8" mounting hole, 1/8" Female Thread; Fits standard 1/4" or 3/8" tubing used on most RO systems ( Choose correct Size carefully before order)
  • ★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system.

More Info

YXQ 1/4PT Push In Connector 10mm Quick Fittings Thread One Touch Pneumatic Fittings Male Thread L shape 90 Degree(5Pcs)

Search only YXQ brand name
YXQ 1/4PT Push In Connector 10mm Quick Fittings Thread One Touch Pneumatic Fittings Male Thread L shape 90 Degree(5Pcs)

Current price: 8.99 USD


Check price and availability


Height: 0.70866 Inches

Length: 1.65354 Inches

Width: 1.37795 Inches

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • ★Notes: Our fittings can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)
  • ★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required.
  • ★FUNCTION&QUALITY: A quick connect fitting is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality.
  • ★SIZE &TUBE COMPATIBLE WITH: Requires 5/8" mounting hole, 1/8" Female Thread; Fits standard 1/4" or 3/8" tubing used on most RO systems ( Choose correct Size carefully before order)
  • ★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system.
  • Package Content : 5 x Pneumatic Quick Coupler
  • The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely
  • Tube Inner Diameter: 10mm/0.4";Total Size(Each): 42 x 35 x 18mm/1.65" x 1.4" x 0.71"(L*W*T)
  • One-touch tube fittings with oval ring, Elliptical release ring help to connect the tube easily by manual,no special tools required
  • 1/4PT Thread to 10mm tube, L shape (90 degree)

More Info

DERNORD 2" Tri Clamp to 3/8" Hose Barbed Adapter SUS304 Sanitary Hose Barb Pipe Fitting (3/8 Inch Barb Hose)

Search only DERNORD brand name
DERNORD 2

Current price: 19.59 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • ★Notes: Our fittings can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)
  • ★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required.
  • ★FUNCTION&QUALITY: A quick connect fitting is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality.
  • ★SIZE &TUBE COMPATIBLE WITH: Requires 5/8" mounting hole, 1/8" Female Thread; Fits standard 1/4" or 3/8" tubing used on most RO systems ( Choose correct Size carefully before order)
  • ★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system.
  • Package Content : 5 x Pneumatic Quick Coupler
  • The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely
  • Tube Inner Diameter: 10mm/0.4";Total Size(Each): 42 x 35 x 18mm/1.65" x 1.4" x 0.71"(L*W*T)
  • One-touch tube fittings with oval ring, Elliptical release ring help to connect the tube easily by manual,no special tools required
  • 1/4PT Thread to 10mm tube, L shape (90 degree)
  • Fits: 2" Tri Clamp / Clover / Sanitary Fitting
  • For use with rubber hoses: Barb: 3/8" Barb For Rubber, Plastic, TPU, or other hose
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included)
  • Connects to a hose on both ends
  • Adapter for connecting pipes or fittings of different types

More Info

uxcell Push to Connect Inline Manifold Union Tube Fitting, for 4mm Tube OD 2pcs

Search only uxcell brand name
uxcell Push to Connect Inline Manifold Union Tube Fitting, for 4mm Tube OD 2pcs

Current price: 8.99 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • ★Notes: Our fittings can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)
  • ★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required.
  • ★FUNCTION&QUALITY: A quick connect fitting is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality.
  • ★SIZE &TUBE COMPATIBLE WITH: Requires 5/8" mounting hole, 1/8" Female Thread; Fits standard 1/4" or 3/8" tubing used on most RO systems ( Choose correct Size carefully before order)
  • ★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system.
  • Package Content : 5 x Pneumatic Quick Coupler
  • The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely
  • Tube Inner Diameter: 10mm/0.4";Total Size(Each): 42 x 35 x 18mm/1.65" x 1.4" x 0.71"(L*W*T)
  • One-touch tube fittings with oval ring, Elliptical release ring help to connect the tube easily by manual,no special tools required
  • 1/4PT Thread to 10mm tube, L shape (90 degree)
  • Fits: 2" Tri Clamp / Clover / Sanitary Fitting
  • For use with rubber hoses: Barb: 3/8" Barb For Rubber, Plastic, TPU, or other hose
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included)
  • Connects to a hose on both ends
  • Adapter for connecting pipes or fittings of different types
  • [NOTE] This Quick fittings are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.
  • [APPLICATION] Fluid Admitted:Air Vacuum Water push to connect fitting kits quick connect fitting water (no freezing).
  • [EASY to REALEASE] Press elliptical ring and pull out of tube at the same time.
  • [FEATURE] Push to connect,after installation, the direction of the tube can be changed freely.
  • [SIZE] Elliptical Ring End Inner Diameter (for Tube Outer Diameter): 4 mm; Overall Size: 56.5 x 25 x 14 mm / 2.11 x 0.98 x 0.55 inch(L*W*H).

More Info

SMC KQG2 Series Stainless Steel 316 Push-to-Connect Tube Fitting, 90 Degree Elbow with Sealant, 3/8" Tube OD x 3/8" NPT Male

Search only SMC brand name
SMC KQG2 Series Stainless Steel 316 Push-to-Connect Tube Fitting, 90 Degree Elbow with Sealant, 3/8

Current price: 32.6 USD


Check price and availability


Height: 0.6 Inches

Length: 5.5 Inches

Width: 4 Inches

Weight: 0.000625 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • ★Notes: Our fittings can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)
  • ★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required.
  • ★FUNCTION&QUALITY: A quick connect fitting is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality.
  • ★SIZE &TUBE COMPATIBLE WITH: Requires 5/8" mounting hole, 1/8" Female Thread; Fits standard 1/4" or 3/8" tubing used on most RO systems ( Choose correct Size carefully before order)
  • ★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system.
  • Package Content : 5 x Pneumatic Quick Coupler
  • The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely
  • Tube Inner Diameter: 10mm/0.4";Total Size(Each): 42 x 35 x 18mm/1.65" x 1.4" x 0.71"(L*W*T)
  • One-touch tube fittings with oval ring, Elliptical release ring help to connect the tube easily by manual,no special tools required
  • 1/4PT Thread to 10mm tube, L shape (90 degree)
  • Fits: 2" Tri Clamp / Clover / Sanitary Fitting
  • For use with rubber hoses: Barb: 3/8" Barb For Rubber, Plastic, TPU, or other hose
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included)
  • Connects to a hose on both ends
  • Adapter for connecting pipes or fittings of different types
  • [NOTE] This Quick fittings are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.
  • [APPLICATION] Fluid Admitted:Air Vacuum Water push to connect fitting kits quick connect fitting water (no freezing).
  • [EASY to REALEASE] Press elliptical ring and pull out of tube at the same time.
  • [FEATURE] Push to connect,after installation, the direction of the tube can be changed freely.
  • [SIZE] Elliptical Ring End Inner Diameter (for Tube Outer Diameter): 4 mm; Overall Size: 56.5 x 25 x 14 mm / 2.11 x 0.98 x 0.55 inch(L*W*H).
  • This product is not intended for use in potable water systems
  • Operating temperature range of -5 to +150 degrees C
  • For use with vacuum up to -100 kPa and pressure up to 145 psi
  • 316 stainless steel for corrosion resistance in a wash down environment
  • Push-to-connect mechanism provides reliable retaining force on tube
  • Joins 3/8" NPT male thread to 3/8" OD nylon, polyurethane, or polyolefin tubing at a 90-degree angle

More Info

SMC KQG2 Series Stainless Steel 316 Push-to-Connect Tube Fitting, 90 Degree Elbow with Sealant, 1/4" Tube OD x 1/8" NPT Male

Search only SMC brand name
SMC KQG2 Series Stainless Steel 316 Push-to-Connect Tube Fitting, 90 Degree Elbow with Sealant, 1/4

Current price: 23.99 USD

Saving: $15.00 (38%)


Check price and availability


Height: 0.3 Inches

Length: 5.5 Inches

Width: 4 Inches

Weight: 0.05 Pounds

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • 45-degree flare head tube connection on one side and a male NPT connection on the other
  • Half union for connecting and disconnecting two tubes more easily than with a coupling
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Gasket and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Legines female coupler for connecting 1/4 inch NPT fittings through a bulkhead
  • Meets DOT FMVSS 571.106 and SAE J1131 standards for air brake system performance
  • Operating temperature range of -40 to +200 degrees F (-40 to +93 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • 1/8" male NPT threads on one end and DOT push-in tube receptacle on the other for use with 1/4" OD tubes
  • Air brake tube adapter fitting for connecting air brake tubes to female NPT receptacles
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • ★Notes: Our fittings can be installed without Locking clips. it also can be used with Locking clips ( Search B07WXRMQPF and B07WYMZQBC to buy)
  • ★EASY INSTALLATION: Provides quick and convenient assembly-saving time&expense. New generation Non-Locking Clip technology offer an easy DIY installation without tools required.
  • ★FUNCTION&QUALITY: A quick connect fitting is a coupling used to provide a fast, make-or-break connection of fluid transfer lines. Operated by hand, quick connect fittings replace threaded or flanged connections, which require wrenches. A broad of Sizes covers a broad scope of applications. Our quality system ensures a superior level of product quality.
  • ★SIZE &TUBE COMPATIBLE WITH: Requires 5/8" mounting hole, 1/8" Female Thread; Fits standard 1/4" or 3/8" tubing used on most RO systems ( Choose correct Size carefully before order)
  • ★WATER&FOOD USE: Products are made from safe,non-toxic materials. Our quick fittings are widely used in water purification,food/beverage system.
  • Package Content : 5 x Pneumatic Quick Coupler
  • The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely
  • Tube Inner Diameter: 10mm/0.4";Total Size(Each): 42 x 35 x 18mm/1.65" x 1.4" x 0.71"(L*W*T)
  • One-touch tube fittings with oval ring, Elliptical release ring help to connect the tube easily by manual,no special tools required
  • 1/4PT Thread to 10mm tube, L shape (90 degree)
  • Fits: 2" Tri Clamp / Clover / Sanitary Fitting
  • For use with rubber hoses: Barb: 3/8" Barb For Rubber, Plastic, TPU, or other hose
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included)
  • Connects to a hose on both ends
  • Adapter for connecting pipes or fittings of different types
  • [NOTE] This Quick fittings are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.
  • [APPLICATION] Fluid Admitted:Air Vacuum Water push to connect fitting kits quick connect fitting water (no freezing).
  • [EASY to REALEASE] Press elliptical ring and pull out of tube at the same time.
  • [FEATURE] Push to connect,after installation, the direction of the tube can be changed freely.
  • [SIZE] Elliptical Ring End Inner Diameter (for Tube Outer Diameter): 4 mm; Overall Size: 56.5 x 25 x 14 mm / 2.11 x 0.98 x 0.55 inch(L*W*H).
  • This product is not intended for use in potable water systems
  • Operating temperature range of -5 to +150 degrees C
  • For use with vacuum up to -100 kPa and pressure up to 145 psi
  • 316 stainless steel for corrosion resistance in a wash down environment
  • Push-to-connect mechanism provides reliable retaining force on tube
  • Joins 3/8" NPT male thread to 3/8" OD nylon, polyurethane, or polyolefin tubing at a 90-degree angle
  • This product is not intended for use in potable water systems
  • Operating temperature range of -5 to +150 degrees C
  • For use with vacuum up to -100 kPa and pressure up to 145 psi
  • 316 stainless steel for corrosion resistance in a wash down environment
  • Push-to-connect mechanism provides reliable retaining force on tube
  • Joins 1/8" NPT male thread to 1/4" OD nylon, polyurethane, or polyolefin tubing at a 90-degree angle

More Info

1    2    3    4    5    6    7    8    9    10