Best Hydraulic Tube Reducer Tube Fittings. Reviews November, 2020

Horiznext npt 1/4 to 3/8 Brass Reducer,Hydraulic, Water Pipe, air Tube and Garden Hose Bushing (Pack of 2)

Search only Horiznext brand name
Horiznext npt 1/4 to 3/8 Brass Reducer,Hydraulic, Water Pipe, air Tube and Garden Hose Bushing (Pack of 2)

Current price: 8.3 USD


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread

More Info

Malida Quick Push to Connector, Water Tube Fitting,1/4" Tube OD x 3/8" Tube OD Reducing Straight Union,for RO Water Systems,Water Purifiers Tube Fittings,Pack of 10.

Search only Malida brand name
Malida Quick Push to Connector, Water Tube Fitting,1/4

Current price: 6.9 USD


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.

More Info

Anderson Metals - 54046-0612 Brass Tube Fitting, Coupling, 3/8" Flare x 3/4" Female Pipe

Search only Anderson Metals brand name
Anderson Metals - 54046-0612 Brass Tube Fitting, Coupling, 3/8

Current price: 11.55 USD


Check price and availability


Height: 0.9 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 0.1 Pounds

  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter

More Info

KOOTANS 4pcs Heavy Duty 1/2 NPT Male Thread to 1/4 NPT Female Thread Brass Reducer Hex Bushing Brass Fitting Pipe Hose Tube Adapter Convert

Search only KOOTANS brand name
KOOTANS 4pcs Heavy Duty 1/2 NPT Male Thread to 1/4 NPT Female Thread Brass Reducer Hex Bushing Brass Fitting Pipe Hose Tube Adapter Convert

Current price: 13.29 USD


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
  • Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
  • FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 1/2 to 1/4 npt reducing brass bushing adapters.
  • SIZE - 1/2 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.

More Info

76mm to 63mm 3" to 2.5" OD Sanitary Ferrule Reducer Tube Fitting Stainless Steel SS316

Search only LINGJUN brand name
76mm to 63mm 3

Current price: 19.27 USD


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
  • Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
  • FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 1/2 to 1/4 npt reducing brass bushing adapters.
  • SIZE - 1/2 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.
  • Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes.
  • Concentric reducer allows a change in pipe size to meet hydraulic flow requirements of existing piping system
  • The size indicates Pipe OD(Flow OD), Not the flange(ferrule) OD, the flange(ferrule) OD will be 1/2"(12.7MM) size up
  • Material:Stainless Steel 316
  • High Pressure Durable

More Info

QWORK Reducer Fitting, 4" Tube OD to 1-1/2" Tube OD, SUS304 Tri Clamp Ferrule Style, Sanitary Fitting

Search only QWORK brand name
QWORK Reducer Fitting, 4

Current price: 22.99 USD

Saving: $6.00 (21%)


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
  • Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
  • FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 1/2 to 1/4 npt reducing brass bushing adapters.
  • SIZE - 1/2 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.
  • Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes.
  • Concentric reducer allows a change in pipe size to meet hydraulic flow requirements of existing piping system
  • The size indicates Pipe OD(Flow OD), Not the flange(ferrule) OD, the flange(ferrule) OD will be 1/2"(12.7MM) size up
  • Material:Stainless Steel 316
  • High Pressure Durable
  • Install fixtures on the pipes at both ends to achieve a permanent seal and provide a disassembly channel.
  • Concentric reducers allow the pipe size to be changed to meet the hydraulic flow requirements of existing piping systems.
  • Sanitary fittings for concentric reducers are made of 304 stainless steel, resistant to corrosion and high temperatures, and have pipe joints.
  • Ferrule Size (38MM end): 51mm 1.5 "ferrule fits 1.5" tri clamp.
  • Ferrule Size (101MM end): 119mm 4 "ferrule fits 4" tri clamp.

More Info

Nigo Industrial Co. Brass Pipe Fitting, Hex Bushing Reducer, Nominal Pipe Size: 3/8" NPT Male x 1/4" NPT Female (Pack of 5)

Search only Nigo Valve brand name
Nigo Industrial Co. Brass Pipe Fitting, Hex Bushing Reducer, Nominal Pipe Size: 3/8

Current price: 11.49 USD


Check price and availability


Height: 0.67 Inches

Length: 2.01 Inches

Width: 1.34 Inches

  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
  • Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
  • FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 1/2 to 1/4 npt reducing brass bushing adapters.
  • SIZE - 1/2 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.
  • Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes.
  • Concentric reducer allows a change in pipe size to meet hydraulic flow requirements of existing piping system
  • The size indicates Pipe OD(Flow OD), Not the flange(ferrule) OD, the flange(ferrule) OD will be 1/2"(12.7MM) size up
  • Material:Stainless Steel 316
  • High Pressure Durable
  • Install fixtures on the pipes at both ends to achieve a permanent seal and provide a disassembly channel.
  • Concentric reducers allow the pipe size to be changed to meet the hydraulic flow requirements of existing piping systems.
  • Sanitary fittings for concentric reducers are made of 304 stainless steel, resistant to corrosion and high temperatures, and have pipe joints.
  • Ferrule Size (38MM end): 51mm 1.5 "ferrule fits 1.5" tri clamp.
  • Ferrule Size (101MM end): 119mm 4 "ferrule fits 4" tri clamp.
  • Constructed from extruded bar stock; Use with brass, steel, and iron pipe
  • Contains low-lead (no more than 2.5%); Not for potable/drinking water use
  • Max. Pressure: 1000 PSI WOG; Temperatures range from -65 to 250 F
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
  • 3/8" NPT Male (Actual O.D: 0.675") x 1/4" NPT Female (Actual I.D: 0.440")

More Info

NIGO Industrial Co. Brass Pipe Fitting, Reducer Adapter (1, 3/8" NPT Male x 1/4" NPT Female)

Search only Nigo Valve brand name
NIGO Industrial Co. Brass Pipe Fitting, Reducer Adapter (1, 3/8

Current price: 4.83 USD

Saving: $0.86 (15%)


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
  • Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
  • FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 1/2 to 1/4 npt reducing brass bushing adapters.
  • SIZE - 1/2 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.
  • Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes.
  • Concentric reducer allows a change in pipe size to meet hydraulic flow requirements of existing piping system
  • The size indicates Pipe OD(Flow OD), Not the flange(ferrule) OD, the flange(ferrule) OD will be 1/2"(12.7MM) size up
  • Material:Stainless Steel 316
  • High Pressure Durable
  • Install fixtures on the pipes at both ends to achieve a permanent seal and provide a disassembly channel.
  • Concentric reducers allow the pipe size to be changed to meet the hydraulic flow requirements of existing piping systems.
  • Sanitary fittings for concentric reducers are made of 304 stainless steel, resistant to corrosion and high temperatures, and have pipe joints.
  • Ferrule Size (38MM end): 51mm 1.5 "ferrule fits 1.5" tri clamp.
  • Ferrule Size (101MM end): 119mm 4 "ferrule fits 4" tri clamp.
  • Constructed from extruded bar stock; Use with brass, steel, and iron pipe
  • Contains low-lead (no more than 2.5%); Not for potable/drinking water use
  • Max. Pressure: 1000 PSI WOG; Temperatures range from -65 to 250 F
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
  • 3/8" NPT Male (Actual O.D: 0.675") x 1/4" NPT Female (Actual I.D: 0.440")
  • These fittings contain low-lead, no more than 2.5%.
  • Quick and easy connections: NPT Male x NPT Female
  • Constructed from forged brass
  • Max. Pressure: 150 PSI WOG; Temperatures range from -40 to 160 F
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter

More Info

Metalwork Compression Union Brass Tube Fitting, 2pcs (1/4" OD x 5/16" OD)

Search only Metalwork brand name
Metalwork Compression Union Brass Tube Fitting, 2pcs (1/4

Current price: 9.99 USD


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
  • Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
  • FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 1/2 to 1/4 npt reducing brass bushing adapters.
  • SIZE - 1/2 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.
  • Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes.
  • Concentric reducer allows a change in pipe size to meet hydraulic flow requirements of existing piping system
  • The size indicates Pipe OD(Flow OD), Not the flange(ferrule) OD, the flange(ferrule) OD will be 1/2"(12.7MM) size up
  • Material:Stainless Steel 316
  • High Pressure Durable
  • Install fixtures on the pipes at both ends to achieve a permanent seal and provide a disassembly channel.
  • Concentric reducers allow the pipe size to be changed to meet the hydraulic flow requirements of existing piping systems.
  • Sanitary fittings for concentric reducers are made of 304 stainless steel, resistant to corrosion and high temperatures, and have pipe joints.
  • Ferrule Size (38MM end): 51mm 1.5 "ferrule fits 1.5" tri clamp.
  • Ferrule Size (101MM end): 119mm 4 "ferrule fits 4" tri clamp.
  • Constructed from extruded bar stock; Use with brass, steel, and iron pipe
  • Contains low-lead (no more than 2.5%); Not for potable/drinking water use
  • Max. Pressure: 1000 PSI WOG; Temperatures range from -65 to 250 F
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
  • 3/8" NPT Male (Actual O.D: 0.675") x 1/4" NPT Female (Actual I.D: 0.440")
  • These fittings contain low-lead, no more than 2.5%.
  • Quick and easy connections: NPT Male x NPT Female
  • Constructed from forged brass
  • Max. Pressure: 150 PSI WOG; Temperatures range from -40 to 160 F
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Three piece construction - nut, sleeve and body
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Compression tube connections on both ends
  • Union for connecting and disconnecting two tubes more easily than with a coupling

More Info

Quluxe 2 Pcs of American Standard Hydraulic Joint Brass Flare Half Union Tube Fitting Hex Head SAE 45 Degree Flaring 3/8" OD x 3/8" NPT Male Pipe

Search only Quluxe brand name
Quluxe 2 Pcs of American Standard Hydraulic Joint Brass Flare Half Union Tube Fitting Hex Head SAE 45 Degree Flaring 3/8

Current price: 9.99 USD


Check price and availability


  • ➤ Package include: 2 pcs.
  • ➤ WORKING ENVIRONMENT: -65 to 250 degrees F
  • ➤ APPLICATION: Plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • ➤ SUPERIOR THREADS: Precisely milled, threads are tight, deep, smoothe. Male National Pipe Taper (NPT) threads.
  • ➤ MATERIAL: Brass. More durable than iron and iron galvanized pipe fittings, 3/8"-1/4" NPT thread
  • FDA approved, certified and tested under ANSI/NSF-61 for approved contact with drinking water
  • Applications include: Water Purifiers,Water Filter,RO system beverage dispensing refrigerator ice maker coffee machine etc
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Water Tube Fitting
  • Connect and disconnect quick and easy without any other tools,100% leak free, 100% Re-useable
  • Quick connector 3/8" x 1/4" Tube push fit Reducing Straight Union,pack of 10.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Resists mechanical pullout for a more secure connection
  • Operating temperature range of -65 to +250 degrees F
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Flared tube connection on one side and a female NPT connection on the other
  • Coupling fitting for connecting two tubes with the same diameter
  • These 1/2 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
  • Operating Pressure: 1200 psi, Temperature Range of -65°F to +250°F (-53°C to +121°C). It's hard connect way and in most cases do not require sealant.
  • FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
  • MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 1/2 to 1/4 npt reducing brass bushing adapters.
  • SIZE - 1/2 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end.
  • Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes and shapes.
  • Concentric reducer allows a change in pipe size to meet hydraulic flow requirements of existing piping system
  • The size indicates Pipe OD(Flow OD), Not the flange(ferrule) OD, the flange(ferrule) OD will be 1/2"(12.7MM) size up
  • Material:Stainless Steel 316
  • High Pressure Durable
  • Install fixtures on the pipes at both ends to achieve a permanent seal and provide a disassembly channel.
  • Concentric reducers allow the pipe size to be changed to meet the hydraulic flow requirements of existing piping systems.
  • Sanitary fittings for concentric reducers are made of 304 stainless steel, resistant to corrosion and high temperatures, and have pipe joints.
  • Ferrule Size (38MM end): 51mm 1.5 "ferrule fits 1.5" tri clamp.
  • Ferrule Size (101MM end): 119mm 4 "ferrule fits 4" tri clamp.
  • Constructed from extruded bar stock; Use with brass, steel, and iron pipe
  • Contains low-lead (no more than 2.5%); Not for potable/drinking water use
  • Max. Pressure: 1000 PSI WOG; Temperatures range from -65 to 250 F
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
  • 3/8" NPT Male (Actual O.D: 0.675") x 1/4" NPT Female (Actual I.D: 0.440")
  • These fittings contain low-lead, no more than 2.5%.
  • Quick and easy connections: NPT Male x NPT Female
  • Constructed from forged brass
  • Max. Pressure: 150 PSI WOG; Temperatures range from -40 to 160 F
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Three piece construction - nut, sleeve and body
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Compression tube connections on both ends
  • Union for connecting and disconnecting two tubes more easily than with a coupling
  • Hex nipple for connecting two threaded pipes and fittings, extending pipe length.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Apply to home plumbing pipes, refrigeration, instrumentation, hydraulic and other applications
  • Operating Temperatures: -53 to 121 degrees C ; Pressure Resistance: 0 to 1.6 Mpa
  • Size: 3/8" flare*3/8" NPT; Length: 3.5cm/1.37in

More Info

1    2    3    4    5    6    7    8    9    10