Best Hydraulic Tube Threaded Tube Fittings. Reviews November, 2020

Legines 3/8" Flare Cap, Brass SAE 45 Degree Flare Tube Fitting, Pack of 2

Search only Legines brand name
Legines 3/8

Current price: 8.99 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end

More Info

Bulkhead Union Push to Connect Tube Fitting 3/8" Tube OD X 3/8" Tube OD (5 Packs) Stainless Steel Double Threaded

Search only DERNORD brand name
Bulkhead Union Push to Connect Tube Fitting 3/8

Current price: 19.99 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT

More Info

Bulkhead Union Push to Connect Tube Fitting 1/4 In Tube OD Stainless Steel Double Threaded (5 Packs)

Search only DERPIPE brand name
Bulkhead Union Push to Connect Tube Fitting 1/4 In Tube OD Stainless Steel Double Threaded (5 Packs)

Current price: 13.82 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT

More Info

DERNORD 1.5''Tri clamp Adapter to 1.5 inch MNPT Thread Ferrule Sanitary Pipe Fitting

Search only DERNORD brand name
DERNORD 1.5''Tri clamp Adapter to 1.5 inch MNPT Thread Ferrule Sanitary Pipe Fitting

Current price: 19.99 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT
  • Made of stainless steel 304 for resistance to corrosion and high temperatures
  • Suitable for use in food, beverage, and dairy applications.
  • Milling edge is easier to install
  • Tri clamp Size: 1.5 inch
  • NPT Size:1.5inch

More Info

Brennan Industries 6801-08-04-NWO-FG Forged Steel 90 Degree Elbow Tube Fitting, 3/4"-16 SAE x 7/16"-20 SAE ORB Thread, 1/2" Male JIC x 1/2" Male Adjustable O-Ring Boss

Search only Brennan Industries brand name
Brennan Industries 6801-08-04-NWO-FG Forged Steel 90 Degree Elbow Tube Fitting, 3/4

Current price: 6.96 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT
  • Made of stainless steel 304 for resistance to corrosion and high temperatures
  • Suitable for use in food, beverage, and dairy applications.
  • Milling edge is easier to install
  • Tri clamp Size: 1.5 inch
  • NPT Size:1.5inch
  • Package Dimensions : 2.8 L x 13.5 H x 10.2 W (centimeters)
  • Unit count: 1.0
  • Made in USA
  • Package Weight : 1 pounds

More Info

Vis Brass CA360 Flared Tube Fitting, SAE 45 Degree Flare, Cap, 5/8" Tube OD (Pack of 1)

Search only Vis brand name
Vis Brass CA360 Flared Tube Fitting, SAE 45 Degree Flare, Cap, 5/8

Current price: 9.49 USD


Check price and availability


Weight: 40 Grams

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT
  • Made of stainless steel 304 for resistance to corrosion and high temperatures
  • Suitable for use in food, beverage, and dairy applications.
  • Milling edge is easier to install
  • Tri clamp Size: 1.5 inch
  • NPT Size:1.5inch
  • Package Dimensions : 2.8 L x 13.5 H x 10.2 W (centimeters)
  • Unit count: 1.0
  • Made in USA
  • Package Weight : 1 pounds
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • Metal-to-metal seal
  • Forged nuts for refrigeration applications
  • Cap fitting for closing the end of a male-threaded flare tube

More Info

Brennan Hydraulics 128 Cap & Plug Set. 64 Pcs Lot JIC Hydraulic Adapter Kit w/Plano Case + 64 Pcs Lot ORFS O-Ring ORS Plug & Cap Flat Face Hydraulic Fitting Seal Kit w/Plano Case. Value Pack

Search only Brennan Industries brand name
Brennan Hydraulics 128 Cap & Plug Set. 64 Pcs Lot JIC Hydraulic Adapter Kit w/Plano Case + 64 Pcs Lot ORFS O-Ring ORS Plug & Cap Flat Face Hydraulic Fitting Seal Kit w/Plano Case. Value Pack

Current price: 119 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT
  • Made of stainless steel 304 for resistance to corrosion and high temperatures
  • Suitable for use in food, beverage, and dairy applications.
  • Milling edge is easier to install
  • Tri clamp Size: 1.5 inch
  • NPT Size:1.5inch
  • Package Dimensions : 2.8 L x 13.5 H x 10.2 W (centimeters)
  • Unit count: 1.0
  • Made in USA
  • Package Weight : 1 pounds
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • Metal-to-metal seal
  • Forged nuts for refrigeration applications
  • Cap fitting for closing the end of a male-threaded flare tube
  • 128PC SET. CONTAINS THE FOLLOWING (10) 2408-04, (10) 304C-04, (8) 2408-06, (8) 304C-06, (6) 2408-08, (6) 304C-08, (4) 2408-10, (4) 304C-10, (2) 2408-12, (2) 304C-12, (2) 2408-16, (2) 304C-16 + (10) FS2408-04, (10) FS304C-04, (8) FS2408-06, (8) FS304C-06, (6) FS2408-08, (6) FS304C-08, (4) FS2408-10, (4) FS304C-10, (2) FS2408-12, (2) FS304C-12, (2) FS2408-16, (2) FS304C-16

More Info

Vis Brass Bulkhead Pipe Fitting, Threaded Bulk head Coupling, Short Anchor Coupler, 1/4" NPT Female, 15/16" Length (Pack of 5)

Search only Vis brand name
Vis Brass Bulkhead Pipe Fitting, Threaded Bulk head Coupling, Short Anchor Coupler, 1/4

Current price: 21.99 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT
  • Made of stainless steel 304 for resistance to corrosion and high temperatures
  • Suitable for use in food, beverage, and dairy applications.
  • Milling edge is easier to install
  • Tri clamp Size: 1.5 inch
  • NPT Size:1.5inch
  • Package Dimensions : 2.8 L x 13.5 H x 10.2 W (centimeters)
  • Unit count: 1.0
  • Made in USA
  • Package Weight : 1 pounds
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • Metal-to-metal seal
  • Forged nuts for refrigeration applications
  • Cap fitting for closing the end of a male-threaded flare tube
  • 128PC SET. CONTAINS THE FOLLOWING (10) 2408-04, (10) 304C-04, (8) 2408-06, (8) 304C-06, (6) 2408-08, (6) 304C-08, (4) 2408-10, (4) 304C-10, (2) 2408-12, (2) 304C-12, (2) 2408-16, (2) 304C-16 + (10) FS2408-04, (10) FS304C-04, (8) FS2408-06, (8) FS304C-06, (6) FS2408-08, (6) FS304C-08, (4) FS2408-10, (4) FS304C-10, (2) FS2408-12, (2) FS304C-12, (2) FS2408-16, (2) FS304C-16
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Washer and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Female coupler for connecting NPT pipe fittings through a bulkhead

More Info

Brennan 2603-04-04-04-FG Forged Steel JIC Flared Tube Fitting, Tee, 1/4" Tube OD JIC Male

Search only brennan brand name
Brennan 2603-04-04-04-FG Forged Steel JIC Flared Tube Fitting, Tee, 1/4

Current price: 11.21 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT
  • Made of stainless steel 304 for resistance to corrosion and high temperatures
  • Suitable for use in food, beverage, and dairy applications.
  • Milling edge is easier to install
  • Tri clamp Size: 1.5 inch
  • NPT Size:1.5inch
  • Package Dimensions : 2.8 L x 13.5 H x 10.2 W (centimeters)
  • Unit count: 1.0
  • Made in USA
  • Package Weight : 1 pounds
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • Metal-to-metal seal
  • Forged nuts for refrigeration applications
  • Cap fitting for closing the end of a male-threaded flare tube
  • 128PC SET. CONTAINS THE FOLLOWING (10) 2408-04, (10) 304C-04, (8) 2408-06, (8) 304C-06, (6) 2408-08, (6) 304C-08, (4) 2408-10, (4) 304C-10, (2) 2408-12, (2) 304C-12, (2) 2408-16, (2) 304C-16 + (10) FS2408-04, (10) FS304C-04, (8) FS2408-06, (8) FS304C-06, (6) FS2408-08, (6) FS304C-08, (4) FS2408-10, (4) FS304C-10, (2) FS2408-12, (2) FS304C-12, (2) FS2408-16, (2) FS304C-16
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Washer and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Female coupler for connecting NPT pipe fittings through a bulkhead
  • Meets SAE standard 070401 for quality assurance
  • Meets Military Specification 51510
  • Made of forged steel for weldability, rust resistance, and durability
  • Fitting has JIC flared male connectors for connecting to female JIC pipes
  • Tee with three openings for connecting and branching three pipes

More Info

Brennan 6400-06-06-O Steel JIC Flared Tube Fitting, Straight, 3/8" Tube OD JIC Male x 9/16-18 Male Straight Thread O-Ring Boss

Search only brennan brand name
Brennan 6400-06-06-O Steel JIC Flared Tube Fitting, Straight, 3/8

Current price: 6.37 USD


Check price and availability


  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
  • Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
  • It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
  • Flare cap for terminating/closing pipe end
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Fitting Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT
  • Fluid Admitted: Air, Vacuum, Water (No Freezing); Working Pressure:0-1.0mpa |150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently
  • Bulkhead Union Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property
  • Bulkhead Union Type: Push In Straight Male Connector; Body:Nickel Plated Brass Seal, O-Ring NBR;
  • Bulkhead Union Push Connector Type : 1/4 inch, Tube OD 1/4 inch NPT
  • Made of stainless steel 304 for resistance to corrosion and high temperatures
  • Suitable for use in food, beverage, and dairy applications.
  • Milling edge is easier to install
  • Tri clamp Size: 1.5 inch
  • NPT Size:1.5inch
  • Package Dimensions : 2.8 L x 13.5 H x 10.2 W (centimeters)
  • Unit count: 1.0
  • Made in USA
  • Package Weight : 1 pounds
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C)
  • CA360 brass for strength and resistance to corrosion
  • Metal-to-metal seal
  • Forged nuts for refrigeration applications
  • Cap fitting for closing the end of a male-threaded flare tube
  • 128PC SET. CONTAINS THE FOLLOWING (10) 2408-04, (10) 304C-04, (8) 2408-06, (8) 304C-06, (6) 2408-08, (6) 304C-08, (4) 2408-10, (4) 304C-10, (2) 2408-12, (2) 304C-12, (2) 2408-16, (2) 304C-16 + (10) FS2408-04, (10) FS304C-04, (8) FS2408-06, (8) FS304C-06, (6) FS2408-08, (6) FS304C-08, (4) FS2408-10, (4) FS304C-10, (2) FS2408-12, (2) FS304C-12, (2) FS2408-16, (2) FS304C-16
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
  • 1,200 psi maximum working pressure
  • Washer and nut for air tight seal through bulkhead
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Female coupler for connecting NPT pipe fittings through a bulkhead
  • Meets SAE standard 070401 for quality assurance
  • Meets Military Specification 51510
  • Made of forged steel for weldability, rust resistance, and durability
  • Fitting has JIC flared male connectors for connecting to female JIC pipes
  • Tee with three openings for connecting and branching three pipes
  • Meets SAE standard J514 for quality assurance
  • Operating temperature ranges from -63 to 400 degrees F
  • Made of steel for greater rust resistance than iron
  • Fitting has a JIC flared male connector on one end and an O-ring boss on the other
  • Adapter for connecting pipes or fittings of different types

More Info

1    2    3    4    5    6    7    8    9    10