Best Hydraulic Tube Welded Tube Fittings. Reviews September, 2020

Hydraulic Cylinder Welded Double Acting Cross Tube (2.5x36)

Search only Magister Hydraulics brand name
Hydraulic Cylinder Welded Double Acting Cross Tube (2.5x36)

Current price: 185 USD


Check price and availability


Height: 5 Inches

Length: 47 Inches

Width: 5 Inches

Weight: 45.5 Pounds

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"

More Info

Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 2.5" Bore x 16" Stroke

Search only Mighty brand name
Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 2.5

Current price: 88.57 USD


Check price and availability


Weight: 29 Pounds

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"

More Info

Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 1.5" Bore x 12" Stroke

Search only Mighty brand name
Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 1.5

Current price: 50.09 USD


Check price and availability


Weight: 14.08 Pounds

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"

More Info

Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 2" Bore x 16" Stroke

Search only Mighty brand name
Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 2

Current price: 84.21 USD


Check price and availability


Weight: 22 Pounds

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"
  • Max Load: 9424 lbs
  • Work Port: SAE 6
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/4", Pin Diameter: 1"

More Info

Eaton Aeroquip 2062-6-8S Steel Flared Tube Fitting, 90 Degree Elbow, 1/2" Male JIC x 3/8" O-Ring Boss Male

Search only Aeroquip brand name
Eaton Aeroquip 2062-6-8S Steel Flared Tube Fitting, 90 Degree Elbow, 1/2

Current price: 8.84 USD

Saving: $1.76 (17%)


Check price and availability


Height: 0.7 Inches

Length: 1.9 Inches

Width: 1.7 Inches

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"
  • Max Load: 9424 lbs
  • Work Port: SAE 6
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/4", Pin Diameter: 1"
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons
  • Steel for weldability and greater resistance to rust than iron
  • Male JIC threads on one end and male O-ring boss threads on the other end for connecting two different threaded ends
  • Joint Industry Council (JIC) male 90-degree elbow for connecting a tube to an O-ring boss female at a 90-degree angle

More Info

Legines Brass Tube Fitting, SAE 45 Degree Flare Adapter Union, 3/8" Flare Male to 1/8" NPT Male (Pack of 2)

Search only Legines brand name
Legines Brass Tube Fitting, SAE 45 Degree Flare Adapter Union, 3/8

Current price: 7.59 USD


Check price and availability


Height: 4.330708657 Inches

Length: 5.511811018 Inches

Width: 1.968503935 Inches

Weight: 0.1322773572 Pounds

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"
  • Max Load: 9424 lbs
  • Work Port: SAE 6
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/4", Pin Diameter: 1"
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons
  • Steel for weldability and greater resistance to rust than iron
  • Male JIC threads on one end and male O-ring boss threads on the other end for connecting two different threaded ends
  • Joint Industry Council (JIC) male 90-degree elbow for connecting a tube to an O-ring boss female at a 90-degree angle
  • Resists mechanical pullout for a more secure connection
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with LP and natural gas, refrigeration, and hydraulic applications
  • For connecting and disconnecting two tubes more easily than with a coupling
  • SAE 45-degree flare head tube connection on one side and a male NPT connection on the other

More Info

uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD 3pcs

Search only uxcell brand name
uxcell Stainless Steel Compression Tube Fitting 1/2NPT Male x 3/8 Tube OD 3pcs

Current price: 15.79 USD


Check price and availability


Height: 1.97 Inches

Length: 1.97 Inches

Width: 1.97 Inches

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"
  • Max Load: 9424 lbs
  • Work Port: SAE 6
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/4", Pin Diameter: 1"
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons
  • Steel for weldability and greater resistance to rust than iron
  • Male JIC threads on one end and male O-ring boss threads on the other end for connecting two different threaded ends
  • Joint Industry Council (JIC) male 90-degree elbow for connecting a tube to an O-ring boss female at a 90-degree angle
  • Resists mechanical pullout for a more secure connection
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with LP and natural gas, refrigeration, and hydraulic applications
  • For connecting and disconnecting two tubes more easily than with a coupling
  • SAE 45-degree flare head tube connection on one side and a male NPT connection on the other
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch

More Info

Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Types, Carbon Steel, 1/4 JIC(f) x 1/4 NPT(f) End Size, 1/4" Tube OD, 1/4" Female Pipe Size

Search only Aeroquip brand name
Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Types, Carbon Steel, 1/4 JIC(f) x 1/4 NPT(f) End Size, 1/4

Current price: 9.97 USD

Saving: $3.02 (23%)


Check price and availability


Height: 0.8 Inches

Length: 1.5 Inches

Width: 0.8 Inches

Weight: 0.000625 Pounds

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"
  • Max Load: 9424 lbs
  • Work Port: SAE 6
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/4", Pin Diameter: 1"
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons
  • Steel for weldability and greater resistance to rust than iron
  • Male JIC threads on one end and male O-ring boss threads on the other end for connecting two different threaded ends
  • Joint Industry Council (JIC) male 90-degree elbow for connecting a tube to an O-ring boss female at a 90-degree angle
  • Resists mechanical pullout for a more secure connection
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with LP and natural gas, refrigeration, and hydraulic applications
  • For connecting and disconnecting two tubes more easily than with a coupling
  • SAE 45-degree flare head tube connection on one side and a male NPT connection on the other
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements
  • Standard duty for light to medium pressure applications
  • Carbon steel for tensile strength and hardness
  • Female JIC threads on one end and female NPT threads on the other end for connecting two different threaded ends
  • Female Joint Industry Council (JIC) swiveling connector to connect to a National Pipe Thread (NPT) female thread

More Info

Brass 45 Degree Flare 1/4" OD Plug, SAE Flared Tube Fitting, Seal Plugs, 5pcs

Search only MeiChi brand name
Brass 45 Degree Flare 1/4

Current price: 9.99 USD


Check price and availability


  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"
  • Max Load: 9424 lbs
  • Work Port: SAE 6
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/4", Pin Diameter: 1"
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons
  • Steel for weldability and greater resistance to rust than iron
  • Male JIC threads on one end and male O-ring boss threads on the other end for connecting two different threaded ends
  • Joint Industry Council (JIC) male 90-degree elbow for connecting a tube to an O-ring boss female at a 90-degree angle
  • Resists mechanical pullout for a more secure connection
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with LP and natural gas, refrigeration, and hydraulic applications
  • For connecting and disconnecting two tubes more easily than with a coupling
  • SAE 45-degree flare head tube connection on one side and a male NPT connection on the other
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements
  • Standard duty for light to medium pressure applications
  • Carbon steel for tensile strength and hardness
  • Female JIC threads on one end and female NPT threads on the other end for connecting two different threaded ends
  • Female Joint Industry Council (JIC) swiveling connector to connect to a National Pipe Thread (NPT) female thread
  • Not for use in potable drinking water applications
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical.
  • The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.
  • 1/4" OD 45°flare Plug fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out.

More Info

Eaton Aeroquip 2062-12-12S Steel Flared Tube Fitting, 90 Degree Elbow, 3/4" Male JIC x 3/4" O-Ring Boss Male

Search only Aeroquip brand name
Eaton Aeroquip 2062-12-12S Steel Flared Tube Fitting, 90 Degree Elbow, 3/4

Current price: 10.74 USD


Check price and availability


Height: 1.5 Inches

Length: 2.6 Inches

Width: 2.3 Inches

  • Extended 80"
  • Retracted 44"
  • Rod 1.5"
  • Stroke 36"
  • Bore 2.5"
  • Max Load: 14726 lbs
  • Work Port: SAE 8
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/2", Pin Diameter: 1"
  • Max Load: 5300 lbs
  • Work Port: SAE4#
  • Extended Length: 32"
  • Closed Length: 20"
  • Shaft Diameter: 1", Pin Diameter: 3/4"
  • Max Load: 9424 lbs
  • Work Port: SAE 6
  • Extended Length: 40"
  • Closed Length: 24"
  • Shaft Diameter: 1-1/4", Pin Diameter: 1"
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons
  • Steel for weldability and greater resistance to rust than iron
  • Male JIC threads on one end and male O-ring boss threads on the other end for connecting two different threaded ends
  • Joint Industry Council (JIC) male 90-degree elbow for connecting a tube to an O-ring boss female at a 90-degree angle
  • Resists mechanical pullout for a more secure connection
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Use with LP and natural gas, refrigeration, and hydraulic applications
  • For connecting and disconnecting two tubes more easily than with a coupling
  • SAE 45-degree flare head tube connection on one side and a male NPT connection on the other
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8 ; Male Dia : NPT1/2 ; Ferrule Mini Inner Dia : 10mm/0.39inch
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements
  • Standard duty for light to medium pressure applications
  • Carbon steel for tensile strength and hardness
  • Female JIC threads on one end and female NPT threads on the other end for connecting two different threaded ends
  • Female Joint Industry Council (JIC) swiveling connector to connect to a National Pipe Thread (NPT) female thread
  • Not for use in potable drinking water applications
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical.
  • The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety.
  • 1/4" OD 45°flare Plug fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out.
  • Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC flare type tubing
  • Buna-nitrile O-ring seal for strength and compatibility with a variety of fluids such as petroleum and hydrocarbons
  • Steel for weldability and greater resistance to rust than iron
  • Male JIC threads on one end and male O-ring boss threads on the other end for connecting two different threaded ends
  • Joint Industry Council (JIC) male 90-degree elbow for connecting a tube to an O-ring boss female at a 90-degree angle

More Info

1    2    3    4    5    6    7    8    9    10