Best Industrial Amplifiers. Reviews October, 2020

Air Amplifier 1.50" ID

Search only Arizona Vortex Tube Mfg. Co. brand name
Air Amplifier 1.50

Current price: 100 USD


Check price and availability


  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction

More Info

High Voltage Plugs & Sockets, 2 Pairs 10KV Banana Cross Jack Brass Core Better Conductivity, 4mm Torx Snap Banana Connectors for Speakers Receivers Amplifiers Tester Industrial Radio

Search only Thincol brand name
High Voltage Plugs & Sockets, 2 Pairs 10KV Banana Cross Jack Brass Core Better Conductivity, 4mm Torx Snap Banana Connectors for Speakers Receivers Amplifiers Tester Industrial Radio

Current price: 11.89 USD


Check price and availability


Height: 1.968503935 Inches

Length: 2.755905509 Inches

Width: 2.755905509 Inches

Weight: 0.1322773572 Pounds

  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.

More Info

RS232 RS485 to 4 Ports RS485 Repeater Optical Isolator Industrial Grade, RS485 hub 4 in 1 Out Signal Amplifier Anti-Interference (RS485/232 to 4 Ports RS485)

Search only DAOK brand name
RS232 RS485 to 4 Ports RS485 Repeater Optical Isolator Industrial Grade, RS485 hub 4 in 1 Out Signal Amplifier Anti-Interference (RS485/232 to 4 Ports RS485)

Current price: 45.99 USD


Check price and availability


  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.

More Info

Honeywell R7847A1033 Flame Amplifier Used with 7800 Series Relay, 0.8/3 Seconds, Green

Search only Honeywell Home brand name
Honeywell R7847A1033 Flame Amplifier Used with 7800 Series Relay, 0.8/3 Seconds, Green

Current price: 131.98 USD


Check price and availability


Height: 7.086614166 Inches

Length: 9.055118101 Inches

Width: 6.299212592 Inches

Weight: 0.000625 Pounds

  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • Compatible with existing Honeywell flame detectors (order separately)
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal strength ranges from 0.0 to 5.0 VC
  • Flame failure response time of 0.8 or 3.0 seconds

More Info

SparkFun Load Cell Amplifier - HX711

Search only SparkFun brand name
SparkFun Load Cell Amplifier - HX711

Current price: 12.95 USD


Check price and availability


Height: 1 Inches

Length: 3 Inches

Width: 2 Inches

Weight: 0.000625 Pounds

  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • Compatible with existing Honeywell flame detectors (order separately)
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal strength ranges from 0.0 to 5.0 VC
  • Flame failure response time of 0.8 or 3.0 seconds
  • Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711
  • Simultaneous 50 and 60Hz supply rejection
  • Selectable 10SPS or 80SPS output data rate
  • Operation Voltage: 2.7V–5V Operation Current: < 1.5mA
  • HX711 IC

More Info

RS485 to 8 Ports RS485 Repeater Optical Isolator Industrial Grade, RS485 hub 8 in 1 Out Signal Amplifier Anti-Interference (RS485 to 8 Ports RS485)

Search only DAOK brand name
RS485 to 8 Ports RS485 Repeater Optical Isolator Industrial Grade, RS485 hub 8 in 1 Out Signal Amplifier Anti-Interference (RS485 to 8 Ports RS485)

Current price: 79.9 USD


Check price and availability


  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • Compatible with existing Honeywell flame detectors (order separately)
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal strength ranges from 0.0 to 5.0 VC
  • Flame failure response time of 0.8 or 3.0 seconds
  • Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711
  • Simultaneous 50 and 60Hz supply rejection
  • Selectable 10SPS or 80SPS output data rate
  • Operation Voltage: 2.7V–5V Operation Current: < 1.5mA
  • HX711 IC
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • The RS485 to 8 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication,And support 1-way RS485 to 8-way RS485 It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.

More Info

RS485 to 2 Ports RS485 Repeater Optical Isolator Industrial Grade, RS485 hub Signal Amplifier Anti-Interference (RS485 to 2 Ports RS485)

Search only DAOK brand name
RS485 to 2 Ports RS485 Repeater Optical Isolator Industrial Grade, RS485 hub Signal Amplifier Anti-Interference (RS485 to 2 Ports RS485)

Current price: 38.99 USD


Check price and availability


  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • Compatible with existing Honeywell flame detectors (order separately)
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal strength ranges from 0.0 to 5.0 VC
  • Flame failure response time of 0.8 or 3.0 seconds
  • Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711
  • Simultaneous 50 and 60Hz supply rejection
  • Selectable 10SPS or 80SPS output data rate
  • Operation Voltage: 2.7V–5V Operation Current: < 1.5mA
  • HX711 IC
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • The RS485 to 8 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication,And support 1-way RS485 to 8-way RS485 It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • RS485 to 2 ports RS485 repeater / hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.

More Info

2" Swivel Caster Wheels with Safety Dual Locking and Polyurethane Foam No Noise Wheels, Heavy Duty - 150 Lbs Per Caster (Pack of 4)

Search only Decolighting brand name
2

Current price: 17.99 USD


Check price and availability


Height: 27 Inches

Length: 5 Inches

Width: 16 Inches

Weight: 2.83 Pounds

  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • Compatible with existing Honeywell flame detectors (order separately)
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal strength ranges from 0.0 to 5.0 VC
  • Flame failure response time of 0.8 or 3.0 seconds
  • Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711
  • Simultaneous 50 and 60Hz supply rejection
  • Selectable 10SPS or 80SPS output data rate
  • Operation Voltage: 2.7V–5V Operation Current: < 1.5mA
  • HX711 IC
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • The RS485 to 8 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication,And support 1-way RS485 to 8-way RS485 It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • RS485 to 2 ports RS485 repeater / hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • 100% LIFETIME GUARANTEE- If you are not satisfied, extremely quiet and the smoothest rolling wheels you have ever used, we'll give you a 100% refund within 90 days of purchase.
  • UNIVERSAL USE- The wheels can be used for a multitude of applications Including: Flight Cases, Instrument Cases, Display / Exhibition Equipment, Dollies, Tool Boxes, Light Machinery, Equipment Stands, Mobile Workstations, Speakers, Cabinets, Stands, Amps, Electrical Enclosures, Furniture etc.
  • HEAVY DUTY BEARINGS- Steel structures body is extremely hard wearing and resistant to dirt, 600 lbs capacity for the pack of 4, Bearing Heavy Duty.
  • MAX FLEXIBILITY AND SAFETY- Swivel casters rotate 360 degrees which makes turning the mating equipment possible, Is good for transporting light furniture and displays quietly and safely.
  • HIGH QUALITY DUAL LOCKING- The wheels made of the popular Non-Marking polyurethane rubber type, very quiet running, absorbs shock and vibrations. Ball bearing and dual locking bring a max loading capacity and safety.

More Info

SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector)-K-Type 2 Temperature sensors 4 programmable Temperature alerts ADDR Jumper for Variable I2C addresses 4-pin JST Polarized Connector

Search only SparkFun brand name
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector)-K-Type 2 Temperature sensors 4 programmable Temperature alerts ADDR Jumper for Variable I2C addresses 4-pin JST Polarized Connector

Current price: 24.95 USD


Check price and availability


Height: 0.35433 Inches

Length: 1.5499969 Inches

Width: 0.999998 Inches

  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • Compatible with existing Honeywell flame detectors (order separately)
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal strength ranges from 0.0 to 5.0 VC
  • Flame failure response time of 0.8 or 3.0 seconds
  • Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711
  • Simultaneous 50 and 60Hz supply rejection
  • Selectable 10SPS or 80SPS output data rate
  • Operation Voltage: 2.7V–5V Operation Current: < 1.5mA
  • HX711 IC
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • The RS485 to 8 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication,And support 1-way RS485 to 8-way RS485 It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • RS485 to 2 ports RS485 repeater / hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • 100% LIFETIME GUARANTEE- If you are not satisfied, extremely quiet and the smoothest rolling wheels you have ever used, we'll give you a 100% refund within 90 days of purchase.
  • UNIVERSAL USE- The wheels can be used for a multitude of applications Including: Flight Cases, Instrument Cases, Display / Exhibition Equipment, Dollies, Tool Boxes, Light Machinery, Equipment Stands, Mobile Workstations, Speakers, Cabinets, Stands, Amps, Electrical Enclosures, Furniture etc.
  • HEAVY DUTY BEARINGS- Steel structures body is extremely hard wearing and resistant to dirt, 600 lbs capacity for the pack of 4, Bearing Heavy Duty.
  • MAX FLEXIBILITY AND SAFETY- Swivel casters rotate 360 degrees which makes turning the mating equipment possible, Is good for transporting light furniture and displays quietly and safely.
  • HIGH QUALITY DUAL LOCKING- The wheels made of the popular Non-Marking polyurethane rubber type, very quiet running, absorbs shock and vibrations. Ball bearing and dual locking bring a max loading capacity and safety.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
  • Four Onboard Temperature Alerts that you can configure! Instead of constantly polling the sensor over I2C, you can set a temperature limit to trigger an interrupt when the temperature reaches a certain value.
  • Temperature Range of -200°C to 1350°C. Resolution of 0.0625°C. PCC Connector for K-Type Thermocouple. ADDR Jumper for variable I2C Addresses (default address of 0x60). 2x Qwiic Connectors
  • The MCP9600 can read both the ambient temperature and the temperature of whatever you're trying to measure!
  • Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction).

More Info

625pcs Heat Shrink Tubing Kit, Heat Shrink Tubes Wire Wrap, Ratio 2:1 Electrical Cable Sleeve Assortment with Storage Case for Long Lasting Insulation Protection by MILAPEAK (8 Sizes, Black)

Search only MILAPEAK brand name
625pcs Heat Shrink Tubing Kit, Heat Shrink Tubes Wire Wrap, Ratio 2:1 Electrical Cable Sleeve Assortment with Storage Case for Long Lasting Insulation Protection by MILAPEAK (8 Sizes, Black)

Current price: 9.49 USD


Check price and availability


Height: 1.3779527545 Inches

Length: 7.87401574 Inches

Width: 5.118110231 Inches

  • No moving parts
  • Amplification ratio 20:1
  • Aluminum construction
  • The voltage though it is 10kv.
  • Lantern-type banana plug connects socket with thread, which is more tight.
  • The surface of it adopts nickel-plated technology, which can protect it.
  • Made of brass and ABS, which is more durable and compact.
  • 100% brand new and high quality.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection. It effectively optocoupler isolate the RS485 signal from the main and auxiliary ends, and has 4 independent isolated auxiliary stations. Effectively do power supply isolating between the main port and the auxiliary port.
  • RS232 RS485 to 4 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • Compatible with existing Honeywell flame detectors (order separately)
  • Flame signal test jacks to measure amplifier flame signal voltage
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation
  • Flame signal strength ranges from 0.0 to 5.0 VC
  • Flame failure response time of 0.8 or 3.0 seconds
  • Load cells use a four-wire Wheatstone bridge configuration to connect to the HX711
  • Simultaneous 50 and 60Hz supply rejection
  • Selectable 10SPS or 80SPS output data rate
  • Operation Voltage: 2.7V–5V Operation Current: < 1.5mA
  • HX711 IC
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. High performance transient voltage suppressor, 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • The RS485 to 8 Ports RS485 repeater/hub. This is a RS485 repeater / hub specially designed for industrial automation communication,And support 1-way RS485 to 8-way RS485 It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • The RS485 terminal transmission distance is more than 3000 meters, stable performance. Adopt external power supply, safe and reliable, suitable for outdoor, provide DC 9 ~ 40V wide voltage input. Widely used in highway toll system, road monitoring system and electric power collection system, it is a data communication product with excellent performance.
  • Signal isolation, power isolation, two-way transmission, enhanced anti-interference, extended communication distance. Support multiple device hand-in-hand connections, or multiple device cascade connections networking. It is easy to install. It can be installed by 35mm standard guide rail or other ways ( (Not included 35mm guide rail).
  • The built-in conversion processor automatically senses the direction of data flow. Automatically judge the channel status, automatically switch the enabling control circuit,It is easy to solve the delay problem of RS485 transceiver conversion.No jumper setting is needed to realize full asynchronous half duplex (RS485) mode conversion.Plug and play.
  • It supports transmission rate up to 115.2kbps, and adopts optical isolation technology in the RS485 terminal. 600W protect against surges circuit,Providing 1000V isolation voltage can effectively ESD protection.
  • RS485 to 2 ports RS485 repeater / hub. This is a RS485 repeater / hub specially designed for industrial automation communication. It solves the networking of RS485 bus star structure and the requirements of RS485 large system in complex electromagnetic environment.
  • 100% LIFETIME GUARANTEE- If you are not satisfied, extremely quiet and the smoothest rolling wheels you have ever used, we'll give you a 100% refund within 90 days of purchase.
  • UNIVERSAL USE- The wheels can be used for a multitude of applications Including: Flight Cases, Instrument Cases, Display / Exhibition Equipment, Dollies, Tool Boxes, Light Machinery, Equipment Stands, Mobile Workstations, Speakers, Cabinets, Stands, Amps, Electrical Enclosures, Furniture etc.
  • HEAVY DUTY BEARINGS- Steel structures body is extremely hard wearing and resistant to dirt, 600 lbs capacity for the pack of 4, Bearing Heavy Duty.
  • MAX FLEXIBILITY AND SAFETY- Swivel casters rotate 360 degrees which makes turning the mating equipment possible, Is good for transporting light furniture and displays quietly and safely.
  • HIGH QUALITY DUAL LOCKING- The wheels made of the popular Non-Marking polyurethane rubber type, very quiet running, absorbs shock and vibrations. Ball bearing and dual locking bring a max loading capacity and safety.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
  • Four Onboard Temperature Alerts that you can configure! Instead of constantly polling the sensor over I2C, you can set a temperature limit to trigger an interrupt when the temperature reaches a certain value.
  • Temperature Range of -200°C to 1350°C. Resolution of 0.0625°C. PCC Connector for K-Type Thermocouple. ADDR Jumper for variable I2C Addresses (default address of 0x60). 2x Qwiic Connectors
  • The MCP9600 can read both the ambient temperature and the temperature of whatever you're trying to measure!
  • Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction).
  • ★ What You Get - Total 625pcs heat shrink tubes, 8 Sizes, Diameter: 2/5"(30pcs), 5/16"(30pcs), 1/4"(45pcs), 1/5"(60pcs), 1/6"(90pcs), 1/8"(100pcs), 1/12"(120pcs), 1/24"(150pcs). Single length: 1.57 inch. Comes with storage box, our worry-free 12-month and friendly customer service.
  • ★ Fast & Easy Use: Our heat shrink tubing has the advantages of good electrical insulation, corrosion resistance and high temperature resistance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy to use a heat gun.
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are RoHS Compliant which ensures its safe and reliable. Does not contain heavy metal and other environmentally hazardous substances. Protect you and your family from toxins.
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection.
  • ★ Versatile & DIY Helper: Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc.

More Info

1    2    3    4    5    6    7    8    9    10