Wonderful Industrial Process Filter Housings. Reviews October, 2020, page 7

PRM 304 Stainless Steel Bag Filter Housing, #2 Size, 2 Inch Flange Inlet/Outlet, 150 PSI Max. Pressure, Bolt Plate Top

More from Industrial & Scientific
Search only brand name
PRM 304 Stainless Steel Bag Filter Housing, #2 Size, 2 Inch Flange Inlet/Outlet, 150 PSI Max. Pressure, Bolt Plate Top

Current price: 1015 USD


Check price and availability


  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel

More Info

SHOP FOX W1727 1 HP Dust Collector

More from Industrial & Scientific
Search only Shop Fox brand name
SHOP FOX W1727 1 HP Dust Collector

Current price: 379.95 USD


Check price and availability


Height: 19.6 Inches

Length: 16.5 Inches

Width: 28.1 Inches

Weight: 55 Pounds

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V

More Info

Pentek 150574 3/4" #10 3G Blue Filter Housing with Bracket and Meter Mount

More from Industrial & Scientific
Search only Pentek brand name
Pentek 150574 3/4

Current price: 41.09 USD


Check price and availability


Height: 13.25 Inches

Length: 5.25 Inches

Width: 5.25 Inches

Weight: 2.73 Pounds

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications

More Info

CRAFTSMAN Benchtop Jointer, 10-Amp (CMEW020)

More from Industrial & Scientific
Search only Craftsman brand name
CRAFTSMAN Benchtop Jointer, 10-Amp (CMEW020)

Current price: 322 USD


Check price and availability


  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.

More Info

Pentek 158133 1/4" #5 Slim Line Clear Filter Housing

More from Industrial & Scientific
Search only Pentek brand name
Pentek 158133 1/4

Current price: 17 USD

Saving: $3.86 (19%)


Check price and availability


Height: 7 Inches

Length: 4.5 Inches

Width: 4.5 Inches

Weight: 1.98 Pounds

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
  • Maximum temperature of 125 degrees F (51.7 degrees C)
  • Initial pressure drop of 2 psi at a flow rate of 3 gpm
  • Use with a 5" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
  • Slim filter housing for low-flow applications with space restrictions

More Info

Hydronix HF3-10CLWH14, 10" Clear Housing with White Rib Cap For RO & Filtration Systems, 1/4" Ports

More from Industrial & Scientific
Search only Hydronix brand name
Hydronix HF3-10CLWH14, 10

Current price: 15.08 USD


Check price and availability


Height: 13 Inches

Length: 5 Inches

Width: 5 Inches

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
  • Maximum temperature of 125 degrees F (51.7 degrees C)
  • Initial pressure drop of 2 psi at a flow rate of 3 gpm
  • Use with a 5" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
  • Slim filter housing for low-flow applications with space restrictions
  • 75 psi max. Pressure
  • San material body
  • 1/4 inch Ports
  • NSF standard 42 certified material
  • 10 inch

More Info

Solberg F-15-050 Inlet Compressor Air FIlter, 1/2" MPT Outlet, 4" Height, 6" Diameter, 10 SCFM, Made in the USA

More from Industrial & Scientific
Search only Solberg brand name
Solberg F-15-050 Inlet Compressor Air FIlter, 1/2

Current price: 28 USD


Check price and availability


Weight: 0.000625 Pounds

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
  • Maximum temperature of 125 degrees F (51.7 degrees C)
  • Initial pressure drop of 2 psi at a flow rate of 3 gpm
  • Use with a 5" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
  • Slim filter housing for low-flow applications with space restrictions
  • 75 psi max. Pressure
  • San material body
  • 1/4 inch Ports
  • NSF standard 42 certified material
  • 10 inch
  • Less maintenance
  • Center bracket located for minimal flow restriction
  • Fully drawn weatherhood - no welds to rust or vibrate apart
  • Durable carbon steel construction with baked enamel finish

More Info

Solberg 245P Polyester Filter Cartridge, Blower, Vacuum Pump, 9-5/8" Height, 4-3/4" Inner Diameter, 7-7/8" Outer Diameter, 880 SCFM, Made in the USA

More from Industrial & Scientific
Search only Solberg brand name
Solberg 245P Polyester Filter Cartridge, Blower, Vacuum Pump, 9-5/8

Current price: 124.99 USD


Check price and availability


Height: 11.7 Inches

Length: 10.3 Inches

Width: 10.3 Inches

Weight: 5.5 Pounds

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
  • Maximum temperature of 125 degrees F (51.7 degrees C)
  • Initial pressure drop of 2 psi at a flow rate of 3 gpm
  • Use with a 5" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
  • Slim filter housing for low-flow applications with space restrictions
  • 75 psi max. Pressure
  • San material body
  • 1/4 inch Ports
  • NSF standard 42 certified material
  • 10 inch
  • Less maintenance
  • Center bracket located for minimal flow restriction
  • Fully drawn weatherhood - no welds to rust or vibrate apart
  • Durable carbon steel construction with baked enamel finish
  • More durable than paper media
  • Moisture resistant
  • Dust loading capacity is increased 40 -Percent - 50-Percent with prefilter
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth

More Info

Pentek 150237 #10 Big Blue Filter Housing, 1" Female NPT Inlet/Outlet

More from Industrial & Scientific
Search only Pentek brand name
Pentek 150237 #10 Big Blue Filter Housing, 1

Current price: 42.41 USD


Check price and availability


Height: 13.13 Inches

Length: 7.25 Inches

Width: 7.25 Inches

Weight: 4.6 Pounds

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
  • Maximum temperature of 125 degrees F (51.7 degrees C)
  • Initial pressure drop of 2 psi at a flow rate of 3 gpm
  • Use with a 5" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
  • Slim filter housing for low-flow applications with space restrictions
  • 75 psi max. Pressure
  • San material body
  • 1/4 inch Ports
  • NSF standard 42 certified material
  • 10 inch
  • Less maintenance
  • Center bracket located for minimal flow restriction
  • Fully drawn weatherhood - no welds to rust or vibrate apart
  • Durable carbon steel construction with baked enamel finish
  • More durable than paper media
  • Moisture resistant
  • Dust loading capacity is increased 40 -Percent - 50-Percent with prefilter
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Initial pressure drop of 1 psi at a flow rate of 15 gpm
  • Pressure relief button for easier cartridge replacement
  • Use with a 10” x 4-1/2” filter cartridge (sold separately)
  • Reinforced polypropylene sump for strength and chemical resistance
  • Large filter housing for high-flow and heavy sediment applications

More Info

Pentek 158319 1/2" #10 High Temperature Slim Line Black Housing

More from Industrial & Scientific
Search only Pentek brand name
Pentek 158319 1/2

Current price: 81.99 USD


Check price and availability


Height: 10 Inches

Length: 2.5 Inches

Width: 2.5 Inches

Weight: 2.1 Pounds

  • Industrial #2 Size Filter Housing
  • 150 psi Maximum Working Pressure, 100 GPM Flow Rate
  • Viton O-rings
  • 2" Flanged Inlet and Outlet Connections
  • 304 Stainless Steel
  • Portable base size: 15-3/4" x 39-3/4"
  • Standard bag filtration: 2.5 microns
  • Air suction capacity: 800 CFM
  • Motor amp draw: 9A/4.5A
  • Motor: 1 HP, 120V/240V, single-phase, prewired 110V
  • Initial pressure drop of 1 psi at a flow rate of 10 gpm
  • Pressure relief button for easier cartridge replacement
  • Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Reinforced polypropylene for strength and chemical resistance
  • Standard filter housing for residential, commercial, and industrial applications
  • Hard and soft surfaces: heavy duty 10 amp motor provides power for hard and soft woods
  • Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing
  • Easy replacement and knife adjustments: two-knife cutter head with jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
  • Variable speed: range of 6, 000 to 11, 000 RPM allows the user to select the right speed for the size and hardness of material
  • 10 amp benchtop Jointer features a variable speed range of 6, 000 to 11, 000 RPM and cutter head speed of 12, 000 to 22, 000 cuts per minute, allowing selection correct speed for material's size and hardness. Two-knife cutter head, with jackscrew knife leveling arrangement and built-in cutter head lock, allows for easy knife replacement and adjustment. Jointer is ideal for edging, flattening, or face jointing.
  • Maximum temperature of 125 degrees F (51.7 degrees C)
  • Initial pressure drop of 2 psi at a flow rate of 3 gpm
  • Use with a 5" x 2-1/2" sediment or carbon filter cartridge (sold separately)
  • Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
  • Slim filter housing for low-flow applications with space restrictions
  • 75 psi max. Pressure
  • San material body
  • 1/4 inch Ports
  • NSF standard 42 certified material
  • 10 inch
  • Less maintenance
  • Center bracket located for minimal flow restriction
  • Fully drawn weatherhood - no welds to rust or vibrate apart
  • Durable carbon steel construction with baked enamel finish
  • More durable than paper media
  • Moisture resistant
  • Dust loading capacity is increased 40 -Percent - 50-Percent with prefilter
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Initial pressure drop of 1 psi at a flow rate of 15 gpm
  • Pressure relief button for easier cartridge replacement
  • Use with a 10” x 4-1/2” filter cartridge (sold separately)
  • Reinforced polypropylene sump for strength and chemical resistance
  • Large filter housing for high-flow and heavy sediment applications
  • Maximum operating pressure of 125 psi
  • Maximum temperature of 160 degrees F (71.1 degrees C)
  • Initial pressure drop of 5 psi at a flow rate of 8 gpm
  • Glass-reinforced nylon for strength and resistance to chemicals and high temperatures
  • Filter housing for high temperature industrial applications

More Info

1    2    3    4    5    6    7    8    9    10