Excellent Industrial Process Filter Housings. Reviews October, 2020, page 9

INTBUYING 304 Stainless Steel 10KG Pressure Water Filter Housing for 10’’L cartridges Filter,3/4in NPT w/Bracket Wrench Pin Heavy Duty Whole House Water Purification

More from Industrial & Scientific
Search only INTBUYING brand name
INTBUYING 304 Stainless Steel 10KG Pressure Water Filter Housing for 10’’L cartridges Filter,3/4in NPT w/Bracket Wrench Pin Heavy Duty Whole House Water Purification

Current price: 115.99 USD


Check price and availability


  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance

More Info

Solberg 234P Paper Filter Cartridge, Blower, Vacuum Pump 9-5/8" Height, 4-3/4" Inner Diameter, 7-7/8" Outer Diameter, 570 SCFM, Made in the USA

More from Industrial & Scientific
Search only Solberg brand name
Solberg 234P Paper Filter Cartridge, Blower, Vacuum Pump 9-5/8

Current price: 31.33 USD


Check price and availability


Height: 11.5 Inches

Length: 9.6 Inches

Width: 9.6 Inches

Weight: 1.6 Pounds

  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth

More Info

PRM Stainless Steel 6 Bag Multi Bag Filter Housing, Uses #2 Size Filter Bags, 150 PSI Pressure

More from Industrial & Scientific
Search only PRM Filtration brand name
PRM Stainless Steel 6 Bag Multi Bag Filter Housing, Uses #2 Size Filter Bags, 150 PSI Pressure

Current price: 6727.49 USD


Check price and availability


  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction

More Info

Tier1 Water Filtration System - 20 inch Slim PP Filter Housing with Pressure Release and Pleated Filter Kit (1 inch Inlet/Outlet)

More from Industrial & Scientific
Search only Tier1 brand name
Tier1 Water Filtration System - 20 inch Slim PP Filter Housing with Pressure Release and Pleated Filter Kit (1 inch Inlet/Outlet)

Current price: 105.48 USD


Check price and availability


Height: 8 Inches

Length: 26 Inches

Width: 13 Inches

Weight: 12.4 Pounds

  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction
  • 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
  • 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great.
  • STANDARD FITTING: Fits standard 1 inch water lines.
  • HIGH QUALITY FILTRATION: The Tier1 R30-20BB filter reduces sediment, dirt, rust, and particles
  • EASY INSTALLATION: Includes filter housing, mounting bracket, filter cartridge, o-ring and lubricant.

More Info

3M - 23194 Under Sink Dedicated Faucet Replacement Water Filter Cartridge DW311-01

More from Industrial & Scientific
Search only 3M brand name
3M - 23194 Under Sink Dedicated Faucet Replacement Water Filter Cartridge DW311-01

Current price: 210.77 USD


Check price and availability


  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction
  • 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
  • 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great.
  • STANDARD FITTING: Fits standard 1 inch water lines.
  • HIGH QUALITY FILTRATION: The Tier1 R30-20BB filter reduces sediment, dirt, rust, and particles
  • EASY INSTALLATION: Includes filter housing, mounting bracket, filter cartridge, o-ring and lubricant.
  • Quick and easy cartridge change out with the 3MDW301 built-in shut-off valve (eliminates having to shut-off water to the faucet while changing cartridges)
  • Sanitary Quick Change (SQC) cartridge design helps provide fast and easy cartridge change-out with minimal effort
  • Triple dual stage carbon-block filtration process provides cleaner, clearer better tasting drinking water
  • Reduces particulate, chlorine taste and odor, chloramine, asbestos, parasitic protozoan cysts, lead, MTBE, trihalomethanes (TTHM) and VOCs

More Info

Hydronix EC-2510C Clear Empty Standard Size Water Filter Cartridge, Durable Construction Universal Pre/Post Use 2.5 x 10

More from Industrial & Scientific
Search only Hydronix brand name
Hydronix EC-2510C Clear Empty Standard Size Water Filter Cartridge, Durable Construction Universal Pre/Post Use 2.5 x 10

Current price: 6.98 USD

Saving: $9.01 (56%)


Check price and availability


Height: 10 Inches

Length: 2.5 Inches

Width: 2.5 Inches

  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction
  • 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
  • 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great.
  • STANDARD FITTING: Fits standard 1 inch water lines.
  • HIGH QUALITY FILTRATION: The Tier1 R30-20BB filter reduces sediment, dirt, rust, and particles
  • EASY INSTALLATION: Includes filter housing, mounting bracket, filter cartridge, o-ring and lubricant.
  • Quick and easy cartridge change out with the 3MDW301 built-in shut-off valve (eliminates having to shut-off water to the faucet while changing cartridges)
  • Sanitary Quick Change (SQC) cartridge design helps provide fast and easy cartridge change-out with minimal effort
  • Triple dual stage carbon-block filtration process provides cleaner, clearer better tasting drinking water
  • Reduces particulate, chlorine taste and odor, chloramine, asbestos, parasitic protozoan cysts, lead, MTBE, trihalomethanes (TTHM) and VOCs
  • Made in Taiwan
  • Excellent flow rate
  • Durable construction
  • Clear refillable cartridge
  • 2.5 x 10 inches

More Info

Solberg SLCRT-050 Compressor/ Blower Absorptive Silencers, 1/2" MPT Inlet/Outlet, 13-7/8" Height, 45 SCFM, Made in the USA

More from Industrial & Scientific
Search only Solberg brand name
Solberg SLCRT-050 Compressor/ Blower Absorptive Silencers, 1/2

Current price: 88 USD


Check price and availability


Weight: 2 Pounds

  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction
  • 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
  • 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great.
  • STANDARD FITTING: Fits standard 1 inch water lines.
  • HIGH QUALITY FILTRATION: The Tier1 R30-20BB filter reduces sediment, dirt, rust, and particles
  • EASY INSTALLATION: Includes filter housing, mounting bracket, filter cartridge, o-ring and lubricant.
  • Quick and easy cartridge change out with the 3MDW301 built-in shut-off valve (eliminates having to shut-off water to the faucet while changing cartridges)
  • Sanitary Quick Change (SQC) cartridge design helps provide fast and easy cartridge change-out with minimal effort
  • Triple dual stage carbon-block filtration process provides cleaner, clearer better tasting drinking water
  • Reduces particulate, chlorine taste and odor, chloramine, asbestos, parasitic protozoan cysts, lead, MTBE, trihalomethanes (TTHM) and VOCs
  • Made in Taiwan
  • Excellent flow rate
  • Durable construction
  • Clear refillable cartridge
  • 2.5 x 10 inches
  • Inlet or discharge applications with max temperature 275-Degree F (135-Degree C)
  • Minimal pressure drop because it does not rely on internal baffles, tubes, or other restrictive devices
  • Layered sound absorbant media
  • Pressure drop graphs available upon request

More Info

Hydronix HF3-10CLWH34PR, 10" Clear Housing with White Rib Cap For RO & Filtration Systems, 3/4" Ports with Relief Button

More from Industrial & Scientific
Search only Hydronix brand name
Hydronix HF3-10CLWH34PR, 10

Current price: 16.41 USD


Check price and availability


Height: 13 Inches

Length: 5 Inches

Width: 5 Inches

  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction
  • 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
  • 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great.
  • STANDARD FITTING: Fits standard 1 inch water lines.
  • HIGH QUALITY FILTRATION: The Tier1 R30-20BB filter reduces sediment, dirt, rust, and particles
  • EASY INSTALLATION: Includes filter housing, mounting bracket, filter cartridge, o-ring and lubricant.
  • Quick and easy cartridge change out with the 3MDW301 built-in shut-off valve (eliminates having to shut-off water to the faucet while changing cartridges)
  • Sanitary Quick Change (SQC) cartridge design helps provide fast and easy cartridge change-out with minimal effort
  • Triple dual stage carbon-block filtration process provides cleaner, clearer better tasting drinking water
  • Reduces particulate, chlorine taste and odor, chloramine, asbestos, parasitic protozoan cysts, lead, MTBE, trihalomethanes (TTHM) and VOCs
  • Made in Taiwan
  • Excellent flow rate
  • Durable construction
  • Clear refillable cartridge
  • 2.5 x 10 inches
  • Inlet or discharge applications with max temperature 275-Degree F (135-Degree C)
  • Minimal pressure drop because it does not rely on internal baffles, tubes, or other restrictive devices
  • Layered sound absorbant media
  • Pressure drop graphs available upon request
  • 75 psi Max. Pressure
  • SAN Material Body
  • 3/4" Ports with Pressure Relief Button
  • NSF Standard 42 Certified Material
  • 10" Clear Body, White Rib Cap with Pressure Relief Button

More Info

Solberg 18P Paper Filter Cartridge with Prefilter for Compressor, 4-3/4" Height, 3" Inner Diameter, 4-3/8" Outer Diameter, 100 SCFM, Made in the USA

More from Industrial & Scientific
Search only Solberg brand name
Solberg 18P Paper Filter Cartridge with Prefilter for Compressor, 4-3/4

Current price: 9.95 USD


Check price and availability


  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction
  • 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
  • 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great.
  • STANDARD FITTING: Fits standard 1 inch water lines.
  • HIGH QUALITY FILTRATION: The Tier1 R30-20BB filter reduces sediment, dirt, rust, and particles
  • EASY INSTALLATION: Includes filter housing, mounting bracket, filter cartridge, o-ring and lubricant.
  • Quick and easy cartridge change out with the 3MDW301 built-in shut-off valve (eliminates having to shut-off water to the faucet while changing cartridges)
  • Sanitary Quick Change (SQC) cartridge design helps provide fast and easy cartridge change-out with minimal effort
  • Triple dual stage carbon-block filtration process provides cleaner, clearer better tasting drinking water
  • Reduces particulate, chlorine taste and odor, chloramine, asbestos, parasitic protozoan cysts, lead, MTBE, trihalomethanes (TTHM) and VOCs
  • Made in Taiwan
  • Excellent flow rate
  • Durable construction
  • Clear refillable cartridge
  • 2.5 x 10 inches
  • Inlet or discharge applications with max temperature 275-Degree F (135-Degree C)
  • Minimal pressure drop because it does not rely on internal baffles, tubes, or other restrictive devices
  • Layered sound absorbant media
  • Pressure drop graphs available upon request
  • 75 psi Max. Pressure
  • SAN Material Body
  • 3/4" Ports with Pressure Relief Button
  • NSF Standard 42 Certified Material
  • 10" Clear Body, White Rib Cap with Pressure Relief Button
  • Dust loading capacity is increased 40 -Percent - 50-Percent with prefilter
  • Less expensive
  • Optimal surface area per given size
  • Higher efficiency than many alternative media

More Info

Hydronix HF2-10CLWH12 10" Clear Housing with White Flat Cap, 1/2" Ports

More from Industrial & Scientific
Search only Hydronix brand name
Hydronix HF2-10CLWH12 10

Current price: 16.91 USD


Check price and availability


Weight: 2.0723452628 Pounds

  • Especially suitable for applications where solenoid valves are used and frequent water hammer occurs. For high flow rates and minimal pressure drops
  • FLIEXBLITY-3/4" NPT Full Port inlet and outlet.Maximum strength  and durability.
  • Applicaiton:Ideal for filtration of water for the whole house, kitchen sink, or for commercial uses. Also suitable for industrial fluid treatment. Avoid the risks of failure and damage of flooding from using low-cost plastic filter housings.
  • This is a heavy duty,10KG rated filter housing for dirt, rust, scale particles, taste/odors, or other contaminants.
  • Material:This housing is made of high quality 304 thicken stainless steel, corrosion resistant. heat resistance, pressure resistance, good wear resistance
  • Filter change out differential: 10"-15" in. H2O above initial delta P
  • Optimal sealing surface and design
  • Washable - lukewarm water and mild detergent
  • Reinforced with epoxy coated steel wire on both sides of cloth
  • Stainless Steel Strainer Baskets Included
  • Viton O-rings
  • 650 GPM Flow Rate
  • Uses Trade Size #2 Size Liquid Filter Bags (Sold Separately)
  • 304 Stainless Steel Construction
  • 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
  • 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great.
  • STANDARD FITTING: Fits standard 1 inch water lines.
  • HIGH QUALITY FILTRATION: The Tier1 R30-20BB filter reduces sediment, dirt, rust, and particles
  • EASY INSTALLATION: Includes filter housing, mounting bracket, filter cartridge, o-ring and lubricant.
  • Quick and easy cartridge change out with the 3MDW301 built-in shut-off valve (eliminates having to shut-off water to the faucet while changing cartridges)
  • Sanitary Quick Change (SQC) cartridge design helps provide fast and easy cartridge change-out with minimal effort
  • Triple dual stage carbon-block filtration process provides cleaner, clearer better tasting drinking water
  • Reduces particulate, chlorine taste and odor, chloramine, asbestos, parasitic protozoan cysts, lead, MTBE, trihalomethanes (TTHM) and VOCs
  • Made in Taiwan
  • Excellent flow rate
  • Durable construction
  • Clear refillable cartridge
  • 2.5 x 10 inches
  • Inlet or discharge applications with max temperature 275-Degree F (135-Degree C)
  • Minimal pressure drop because it does not rely on internal baffles, tubes, or other restrictive devices
  • Layered sound absorbant media
  • Pressure drop graphs available upon request
  • 75 psi Max. Pressure
  • SAN Material Body
  • 3/4" Ports with Pressure Relief Button
  • NSF Standard 42 Certified Material
  • 10" Clear Body, White Rib Cap with Pressure Relief Button
  • Dust loading capacity is increased 40 -Percent - 50-Percent with prefilter
  • Less expensive
  • Optimal surface area per given size
  • Higher efficiency than many alternative media
  • 75 psi max. Pressure
  • San material body
  • 1/2 inch
  • NSF standard 42 certified material
  • 10 inch

More Info

1    2    3    4    5    6    7    8    9    10