Best Insulation Resistance Meters. Reviews December, 2020

Klein Tools ET600 Megohmmeter, Insulation Resistance Tester Multimeter, 4000 Megohm Resistance, 125V/250V/500V/1000V Test Voltage

Search only Klein Tools brand name
Klein Tools ET600 Megohmmeter, Insulation Resistance Tester Multimeter, 4000 Megohm Resistance, 125V/250V/500V/1000V Test Voltage

Current price: 149.99 USD


Check price and availability


Height: 2.42 Inches

Length: 7.94 Inches

Width: 3.59 Inches

Weight: 1.4 Pounds

Warranty: 1 year manufacturer

  • Insulation Resistance Tester

More Info

Supco M500 Insulation Tester/Electronic Megohmmeter with Soft Carrying Case, 0 to 1000 megohms

Search only Supco brand name
Supco M500 Insulation Tester/Electronic Megohmmeter with Soft Carrying Case, 0 to 1000 megohms

Current price: 98 USD

Saving: $12.44 (11%)


Check price and availability


Height: 1.8 Inches

Length: 9.3 Inches

Width: 6 Inches

Weight: 0.75 Pounds

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC

More Info

DUOYI Ground Digital Insulation Resistance Meters, 0-2000 Ohm DCV ACV Meter Megohmmeter Megohm

Search only Yi Duo brand name
DUOYI Ground Digital Insulation Resistance Meters, 0-2000 Ohm DCV ACV Meter Megohmmeter Megohm

Current price: 85.99 USD


Check price and availability


  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.

More Info

Fluke 1507 Digital Megohmmeter Insulation Resistance Tester

Search only Fluke brand name
Fluke 1507 Digital Megohmmeter Insulation Resistance Tester

Current price: 551.4 USD


Check price and availability


Height: 2.9133858238 Inches

Length: 11.7322834526 Inches

Width: 5.905511805 Inches

Weight: 2.20462262 Pounds

Warranty: 1-Year warranty

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe

More Info

LEAGY VICTOR VC60B+ Digital Insulation Resistance Tester Megohm Meter DC250/500/1000V AC750V Orange with Black

Search only LEAGY brand name
LEAGY VICTOR VC60B+ Digital Insulation Resistance Tester Megohm Meter DC250/500/1000V AC750V Orange with Black

Current price: 48.9 USD


Check price and availability


Height: 6.5 Inches

Length: 4.1 Inches

Width: 2.8 Inches

Weight: 1.4 Pounds

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Low power consumption: Less than 300mw at unload measurement
  • Over Range indication: display "1"
  • Data hold and auto power off
  • Large LCD display (84.8*59.8mm), with backlight, max display "1999"
  • Measure Range up to 2000MΩ 1000V with Accuracy of ±(4% of reading +2 digits)

More Info

PEAKMETER MS5203 Digital and Analog 50-1000V Insulation Resistance Tester Meter for AC/DC Voltage Measurement and Continuity Test

Search only Sorand brand name
PEAKMETER MS5203 Digital and Analog 50-1000V Insulation Resistance Tester Meter for AC/DC Voltage Measurement and Continuity Test

Current price: 142.89 USD

Saving: $14.30 (9%)


Check price and availability


Height: 2.9527559025 Inches

Length: 7.6771653465 Inches

Width: 6.1023621985 Inches

Weight: 4.3651527876 Pounds

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Low power consumption: Less than 300mw at unload measurement
  • Over Range indication: display "1"
  • Data hold and auto power off
  • Large LCD display (84.8*59.8mm), with backlight, max display "1999"
  • Measure Range up to 2000MΩ 1000V with Accuracy of ±(4% of reading +2 digits)
  • With backlight display and auto power off.
  • Can also be used to AC/DC voltage measurement and continuity test.
  • Automatic calculation of PI (polarization index) and DAR (dielectric absorption ratio).
  • Test the insulation resistance with 50V-1000V voltage.
  • Check the insulation of high voltage electrical equipment such as motor, transformer, cable, etc.

More Info

ELIKE Insulation Resistance Tester Megohm Meter Rated Test Voltage 100/250 / 500 / 1000V AC 500V, Dark Gray With Orange

Search only ELIKE brand name
ELIKE Insulation Resistance Tester Megohm Meter Rated Test Voltage 100/250 / 500 / 1000V AC 500V, Dark Gray With Orange

Current price: 63.99 USD

Saving: $7.00 (10%)


Check price and availability


Height: 2.8 Inches

Length: 6.9 Inches

Width: 4.3 Inches

Weight: 1.7 Pounds

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Low power consumption: Less than 300mw at unload measurement
  • Over Range indication: display "1"
  • Data hold and auto power off
  • Large LCD display (84.8*59.8mm), with backlight, max display "1999"
  • Measure Range up to 2000MΩ 1000V with Accuracy of ±(4% of reading +2 digits)
  • With backlight display and auto power off.
  • Can also be used to AC/DC voltage measurement and continuity test.
  • Automatic calculation of PI (polarization index) and DAR (dielectric absorption ratio).
  • Test the insulation resistance with 50V-1000V voltage.
  • Check the insulation of high voltage electrical equipment such as motor, transformer, cable, etc.
  • Safety Guarantee: 1.5V(AA)*6 batteries are included. ELIKE provides 2 year warranty and lifetime technical support, if you have any problems about our products, please feel free to contact us.
  • Automatic alarm: when the measurement is less than 2 Megohms.
  • Easy to Use: Features Light Button for visibility in dimly lit areas; Automatically discharges instrument capacitance for safe removal of test leads.
  • ACV & Insulation Resistance Measurement: Measures voltage from 0 to 500V ACV and insulation resistance from 0 to 2000 megohms.
  • Wide Test Range: Insulation resistance meter with built-in voltmeter to test insulation of wires, cables, transformers, and electrical motors etc.

More Info

Fluke 1587 Insulation Multimeter, LCD Display, 2 Gigaohms Insulation Resistance, Up to 1000V Insulation Test Voltage

Search only Fluke brand name
Fluke 1587 Insulation Multimeter, LCD Display, 2 Gigaohms Insulation Resistance, Up to 1000V Insulation Test Voltage

Current price: 779.45 USD


Check price and availability


Height: 4.2 Inches

Length: 14.1 Inches

Width: 11.3 Inches

Weight: 5.180863157 Pounds

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Low power consumption: Less than 300mw at unload measurement
  • Over Range indication: display "1"
  • Data hold and auto power off
  • Large LCD display (84.8*59.8mm), with backlight, max display "1999"
  • Measure Range up to 2000MΩ 1000V with Accuracy of ±(4% of reading +2 digits)
  • With backlight display and auto power off.
  • Can also be used to AC/DC voltage measurement and continuity test.
  • Automatic calculation of PI (polarization index) and DAR (dielectric absorption ratio).
  • Test the insulation resistance with 50V-1000V voltage.
  • Check the insulation of high voltage electrical equipment such as motor, transformer, cable, etc.
  • Safety Guarantee: 1.5V(AA)*6 batteries are included. ELIKE provides 2 year warranty and lifetime technical support, if you have any problems about our products, please feel free to contact us.
  • Automatic alarm: when the measurement is less than 2 Megohms.
  • Easy to Use: Features Light Button for visibility in dimly lit areas; Automatically discharges instrument capacitance for safe removal of test leads.
  • ACV & Insulation Resistance Measurement: Measures voltage from 0 to 500V ACV and insulation resistance from 0 to 2000 megohms.
  • Wide Test Range: Insulation resistance meter with built-in voltmeter to test insulation of wires, cables, transformers, and electrical motors etc.
  • Testing for capacitance, diode, temperature, min/max, and frequency
  • AC/DC voltage, DC milliVolts, AC/DC milliamps, resistance, continuity
  • Auto-discharge of capacitive voltage for added user protection
  • Live circuit detection prevents insulation test if voltage of more than 30 volts is detected
  • Insulation test voltages 50 volts; 100 volts; 250 volts; 500 volts; 1,000 volts
  • Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010-1; ANSI/ISA S82.01-2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010-1:1002 and 61010.1-04, IEC61557-1; IEC61557-2; and IEC/EN 61010-1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Low-pass filter blocks unwanted voltages when measuring AC voltage and AC frequency to provide accurate measurements on inverters and variable-frequency motor drives
  • Insulation test voltages of 50, 100, 250, 500, and 1000V and insulation measurement range of 0.01 megohms to 2 gigohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual- and auto-ranging digital insulation multimeter measures insulation resistance, current, voltage, capacitance, frequency, resistance, and temperature, and performs diode tests for testing line insulation on motors, generators, cables, and switch gear

More Info

Megger MIT210-EN Insulation Tester, 1000 Megaohms Resistance, 1000V Test Voltage

Search only Megger brand name
Megger MIT210-EN Insulation Tester, 1000 Megaohms Resistance, 1000V Test Voltage

Current price: 401.22 USD

Saving: $38.78 (9%)


Check price and availability


Weight: 1.2 Pounds

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Low power consumption: Less than 300mw at unload measurement
  • Over Range indication: display "1"
  • Data hold and auto power off
  • Large LCD display (84.8*59.8mm), with backlight, max display "1999"
  • Measure Range up to 2000MΩ 1000V with Accuracy of ±(4% of reading +2 digits)
  • With backlight display and auto power off.
  • Can also be used to AC/DC voltage measurement and continuity test.
  • Automatic calculation of PI (polarization index) and DAR (dielectric absorption ratio).
  • Test the insulation resistance with 50V-1000V voltage.
  • Check the insulation of high voltage electrical equipment such as motor, transformer, cable, etc.
  • Safety Guarantee: 1.5V(AA)*6 batteries are included. ELIKE provides 2 year warranty and lifetime technical support, if you have any problems about our products, please feel free to contact us.
  • Automatic alarm: when the measurement is less than 2 Megohms.
  • Easy to Use: Features Light Button for visibility in dimly lit areas; Automatically discharges instrument capacitance for safe removal of test leads.
  • ACV & Insulation Resistance Measurement: Measures voltage from 0 to 500V ACV and insulation resistance from 0 to 2000 megohms.
  • Wide Test Range: Insulation resistance meter with built-in voltmeter to test insulation of wires, cables, transformers, and electrical motors etc.
  • Testing for capacitance, diode, temperature, min/max, and frequency
  • AC/DC voltage, DC milliVolts, AC/DC milliamps, resistance, continuity
  • Auto-discharge of capacitive voltage for added user protection
  • Live circuit detection prevents insulation test if voltage of more than 30 volts is detected
  • Insulation test voltages 50 volts; 100 volts; 250 volts; 500 volts; 1,000 volts
  • Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010-1; ANSI/ISA S82.01-2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010-1:1002 and 61010.1-04, IEC61557-1; IEC61557-2; and IEC/EN 61010-1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Low-pass filter blocks unwanted voltages when measuring AC voltage and AC frequency to provide accurate measurements on inverters and variable-frequency motor drives
  • Insulation test voltages of 50, 100, 250, 500, and 1000V and insulation measurement range of 0.01 megohms to 2 gigohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual- and auto-ranging digital insulation multimeter measures insulation resistance, current, voltage, capacitance, frequency, resistance, and temperature, and performs diode tests for testing line insulation on motors, generators, cables, and switch gear
  • Safety rated to European Standard EN61010-1 Category III, 600V and IP40 rated for protection against accidental contact with hazardous parts
  • Measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms
  • Dual digital display with analog arc function to replicate response of analog meters
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations

More Info

VICI Digital Insulation Resistance Tester Megohmmeter Meter VC60B+ with Large LCD Display

Search only VICI brand name
VICI Digital Insulation Resistance Tester Megohmmeter Meter VC60B+ with Large LCD Display

Current price: 44.55 USD


Check price and availability


Height: 2.8 Inches

Length: 7.5 Inches

Width: 4.9 Inches

Weight: 1.22 Pounds

  • Insulation Resistance Tester
  • Operates on 2 C batteries (not included)
  • Test Leads store in case
  • Hand held
  • Zone scale to indicate insulation condition
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not.
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm)
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds).
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds.
  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance.
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Read measurements easily with large, backlit display
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Low power consumption: Less than 300mw at unload measurement
  • Over Range indication: display "1"
  • Data hold and auto power off
  • Large LCD display (84.8*59.8mm), with backlight, max display "1999"
  • Measure Range up to 2000MΩ 1000V with Accuracy of ±(4% of reading +2 digits)
  • With backlight display and auto power off.
  • Can also be used to AC/DC voltage measurement and continuity test.
  • Automatic calculation of PI (polarization index) and DAR (dielectric absorption ratio).
  • Test the insulation resistance with 50V-1000V voltage.
  • Check the insulation of high voltage electrical equipment such as motor, transformer, cable, etc.
  • Safety Guarantee: 1.5V(AA)*6 batteries are included. ELIKE provides 2 year warranty and lifetime technical support, if you have any problems about our products, please feel free to contact us.
  • Automatic alarm: when the measurement is less than 2 Megohms.
  • Easy to Use: Features Light Button for visibility in dimly lit areas; Automatically discharges instrument capacitance for safe removal of test leads.
  • ACV & Insulation Resistance Measurement: Measures voltage from 0 to 500V ACV and insulation resistance from 0 to 2000 megohms.
  • Wide Test Range: Insulation resistance meter with built-in voltmeter to test insulation of wires, cables, transformers, and electrical motors etc.
  • Testing for capacitance, diode, temperature, min/max, and frequency
  • AC/DC voltage, DC milliVolts, AC/DC milliamps, resistance, continuity
  • Auto-discharge of capacitive voltage for added user protection
  • Live circuit detection prevents insulation test if voltage of more than 30 volts is detected
  • Insulation test voltages 50 volts; 100 volts; 250 volts; 500 volts; 1,000 volts
  • Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010-1; ANSI/ISA S82.01-2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010-1:1002 and 61010.1-04, IEC61557-1; IEC61557-2; and IEC/EN 61010-1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
  • Low-pass filter blocks unwanted voltages when measuring AC voltage and AC frequency to provide accurate measurements on inverters and variable-frequency motor drives
  • Insulation test voltages of 50, 100, 250, 500, and 1000V and insulation measurement range of 0.01 megohms to 2 gigohms
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Manual- and auto-ranging digital insulation multimeter measures insulation resistance, current, voltage, capacitance, frequency, resistance, and temperature, and performs diode tests for testing line insulation on motors, generators, cables, and switch gear
  • Safety rated to European Standard EN61010-1 Category III, 600V and IP40 rated for protection against accidental contact with hazardous parts
  • Measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms
  • Dual digital display with analog arc function to replicate response of analog meters
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
  • Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations
  • 📟[Power Source] 1.5V AA battery*6pcs, or external DC 9V power source(Please Note: Not include battery)
  • 📟[LCD Display] Large LCD display, easy to read. LCD backlight:Apporx.10Sec.
  • 📟[Match Type] Support Insulation Resistance, Resistance, DCV, ACV.
  • 📟[Easy to use] VC60B+ is an accurate, reliable and easy-to-use insulation resistance tester. Unit symbol display, easy to use.
  • 📟[Multi-function] Test lead. Full function protection, Anti high voltage circuit design. Strong anti-magnetic and anti-jamming function. High voltage and short circuit input alarm.

More Info

1    2    3    4    5    6    7    8    9    10