Best Intake Manifolds. Reviews August, 2020

Edelbrock 2040 Performer EPS Intake Manifold Installation Kit

Search only Edelbrock brand name
Edelbrock 2040 Performer EPS Intake Manifold Installation Kit

Current price: 206.95 USD


Check price and availability


Weight: 16.75 Pounds

Warranty: 90 Day Manufacturer

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH

More Info

Edelbrock 2701 Performer Intake Manifold

Search only Edelbrock brand name
Edelbrock 2701 Performer Intake Manifold

Current price: 149.62 USD


Check price and availability


Height: 5.7 Inches

Length: 22.4 Inches

Width: 10.6 Inches

Weight: 16.865363043 Pounds

Warranty: 90 Day Manufacturer

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific

More Info

ACDelco 25200449 GM Original Equipment Intake Manifold

Search only ACDelco brand name
ACDelco 25200449 GM Original Equipment Intake Manifold

Current price: 160.03 USD


Check price and availability


Height: 9.99 Inches

Length: 9.99 Inches

Width: 9.99 Inches

Warranty: 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function

More Info

Edelbrock 7501 Performer RPM Air-Gap Intake Manifold

Search only Edelbrock brand name
Edelbrock 7501 Performer RPM Air-Gap Intake Manifold

Current price: 289.95 USD


Check price and availability


Height: 6.7 Inches

Length: 23.8 Inches

Width: 12.2 Inches

Weight: 19.3345403774 Pounds

Warranty: 90 Day Manufacturer

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Temperature sending unit boss clears all water necks
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Dual plane intake style with an Air-Gap

More Info

Edelbrock 27013 Intake Manifold

Search only Edelbrock brand name
Edelbrock 27013 Intake Manifold

Current price: 279.95 USD


Check price and availability


Weight: 17.05 Pounds

Warranty: 90 Day Manufacturer

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Temperature sending unit boss clears all water necks
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Dual plane intake style with an Air-Gap
  • Non-EGR
  • Black Powder Coated Finish
  • 3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
  • Dual Plane Type-4150 Style Flange
  • Idle-5500 RPM Range

More Info

Edelbrock 5001 Torker II Intake Manifold

Search only Edelbrock brand name
Edelbrock 5001 Torker II Intake Manifold

Current price: 240.24 USD


Check price and availability


Height: 5.75 Inches

Length: 22.5 Inches

Width: 10.25 Inches

Weight: 10.5 Pounds

Warranty: 90 Day Manufacturer

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Temperature sending unit boss clears all water necks
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Dual plane intake style with an Air-Gap
  • Non-EGR
  • Black Powder Coated Finish
  • 3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
  • Dual Plane Type-4150 Style Flange
  • Idle-5500 RPM Range
  • Includes large 46mm piston for more consistent damping
  • Welds are done with robotic projection welder for accuracy and consistent quality
  • Tube ends are rolled closed for leak-free construction
  • Durable powder-coated finish for the best corrosion resistance
  • Monotube internal design

More Info

Weiand Intake Manifold - 289-302 Ford Street Warrior

Search only Weiand brand name
Weiand Intake Manifold - 289-302 Ford Street Warrior

Current price: 191.95 USD


Check price and availability


Weight: 15.6307743758 Pounds

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Temperature sending unit boss clears all water necks
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Dual plane intake style with an Air-Gap
  • Non-EGR
  • Black Powder Coated Finish
  • 3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
  • Dual Plane Type-4150 Style Flange
  • Idle-5500 RPM Range
  • Includes large 46mm piston for more consistent damping
  • Welds are done with robotic projection welder for accuracy and consistent quality
  • Tube ends are rolled closed for leak-free construction
  • Durable powder-coated finish for the best corrosion resistance
  • Monotube internal design
  • Square Bore Carburetor Mounting Flange
  • Includes exhaust crossover which enhances drivability
  • Designed using permanent mold casting process,Features a square bore carburetor mounting flange
  • Features a dual plane design,Delivers maximum horsepower and torque
  • Permanent mold casting process for lighter, smoother & better looks
  • Height: Front 3.82", Rear 4.75"
  • Port Size: 1.82” height 1.02" width
  • Street Warrior Intake Manifold 289-302 Ford Small Block

More Info

Speedmaster 1-147-019 MidRise Intake Manifold Big Block Chevy 454 Oval Port Heig

Search only Speedmaster brand name
Speedmaster 1-147-019 MidRise Intake Manifold Big Block Chevy 454 Oval Port Heig

Current price: 180 USD


Check price and availability


Height: 7.6 Inches

Length: 24.2 Inches

Width: 11.7 Inches

Weight: 20.88 Pounds

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Temperature sending unit boss clears all water necks
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Dual plane intake style with an Air-Gap
  • Non-EGR
  • Black Powder Coated Finish
  • 3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
  • Dual Plane Type-4150 Style Flange
  • Idle-5500 RPM Range
  • Includes large 46mm piston for more consistent damping
  • Welds are done with robotic projection welder for accuracy and consistent quality
  • Tube ends are rolled closed for leak-free construction
  • Durable powder-coated finish for the best corrosion resistance
  • Monotube internal design
  • Square Bore Carburetor Mounting Flange
  • Includes exhaust crossover which enhances drivability
  • Designed using permanent mold casting process,Features a square bore carburetor mounting flange
  • Features a dual plane design,Delivers maximum horsepower and torque
  • Permanent mold casting process for lighter, smoother & better looks
  • Height: Front 3.82", Rear 4.75"
  • Port Size: 1.82” height 1.02" width
  • Street Warrior Intake Manifold 289-302 Ford Small Block
  • Satin Finish The Speedmaster MidRise Air design features the identical plenum and runner design as the normal MidRise. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power and...
  • RPM Range: 1,500-6,500...
  • Non-EGR...
  • Height: 4.650 in....
  • Big Block Chevy 454 Oval...

More Info

Edelbrock 2104 Performer Intake Manifold

Search only Edelbrock brand name
Edelbrock 2104 Performer Intake Manifold

Current price: 264.95 USD


Check price and availability


Weight: 15 Pounds

Warranty: 90 Day Manufacturer

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Temperature sending unit boss clears all water necks
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Dual plane intake style with an Air-Gap
  • Non-EGR
  • Black Powder Coated Finish
  • 3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
  • Dual Plane Type-4150 Style Flange
  • Idle-5500 RPM Range
  • Includes large 46mm piston for more consistent damping
  • Welds are done with robotic projection welder for accuracy and consistent quality
  • Tube ends are rolled closed for leak-free construction
  • Durable powder-coated finish for the best corrosion resistance
  • Monotube internal design
  • Square Bore Carburetor Mounting Flange
  • Includes exhaust crossover which enhances drivability
  • Designed using permanent mold casting process,Features a square bore carburetor mounting flange
  • Features a dual plane design,Delivers maximum horsepower and torque
  • Permanent mold casting process for lighter, smoother & better looks
  • Height: Front 3.82", Rear 4.75"
  • Port Size: 1.82” height 1.02" width
  • Street Warrior Intake Manifold 289-302 Ford Small Block
  • Satin Finish The Speedmaster MidRise Air design features the identical plenum and runner design as the normal MidRise. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power and...
  • RPM Range: 1,500-6,500...
  • Non-EGR...
  • Height: 4.650 in....
  • Big Block Chevy 454 Oval...
  • Fitment : 1987-1991 Avanti II / 1987-1987 Buick Regal / 1987-1989 Excalibur Phaeton /1987-1988 GMC G3500
  • Accepts late model alternator and air conditioning brackets
  • Manifold height is 3.50" in the front and 4.60" in the rear
  • Port dimensions are 1.88" height by 1.14" wide
  • Comes with rear water crossovers
  • 50-state legal for use on vehicles originally equipped with 4-barrel carburetors

More Info

Edelbrock 2105 Performer Intake Manifold

Search only Edelbrock brand name
Edelbrock 2105 Performer Intake Manifold

Current price: 427.95 USD


Check price and availability


Weight: 17 Pounds

Warranty: 90 Day Manufacturer

  • MANIFOLD INSTALL KIT PERF EPS SBC 1957-1986 NATURAL FINISH
  • Single carburetor without EGR
  • RPM range is idle to 5,500 RPM
  • Dual plane intake style
  • Fit type: Vehicle Specific
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function
  • Will not fit under stock corvette hood and is meant for square bore carburetors
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Temperature sending unit boss clears all water necks
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Dual plane intake style with an Air-Gap
  • Non-EGR
  • Black Powder Coated Finish
  • 3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
  • Dual Plane Type-4150 Style Flange
  • Idle-5500 RPM Range
  • Includes large 46mm piston for more consistent damping
  • Welds are done with robotic projection welder for accuracy and consistent quality
  • Tube ends are rolled closed for leak-free construction
  • Durable powder-coated finish for the best corrosion resistance
  • Monotube internal design
  • Square Bore Carburetor Mounting Flange
  • Includes exhaust crossover which enhances drivability
  • Designed using permanent mold casting process,Features a square bore carburetor mounting flange
  • Features a dual plane design,Delivers maximum horsepower and torque
  • Permanent mold casting process for lighter, smoother & better looks
  • Height: Front 3.82", Rear 4.75"
  • Port Size: 1.82” height 1.02" width
  • Street Warrior Intake Manifold 289-302 Ford Small Block
  • Satin Finish The Speedmaster MidRise Air design features the identical plenum and runner design as the normal MidRise. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power and...
  • RPM Range: 1,500-6,500...
  • Non-EGR...
  • Height: 4.650 in....
  • Big Block Chevy 454 Oval...
  • Fitment : 1987-1991 Avanti II / 1987-1987 Buick Regal / 1987-1989 Excalibur Phaeton /1987-1988 GMC G3500
  • Accepts late model alternator and air conditioning brackets
  • Manifold height is 3.50" in the front and 4.60" in the rear
  • Port dimensions are 1.88" height by 1.14" wide
  • Comes with rear water crossovers
  • 50-state legal for use on vehicles originally equipped with 4-barrel carburetors
  • Comes with a natural finish
  • Will not accept stock Motor craft spread-bore carburetor
  • Available with non-EGR style
  • Boosts torque from off-idle to 5, 500 RPM
  • Dual-plane, low-rise intake manifolds with a 180 degree firing order

More Info

1    2    3    4    5    6    7    8    9    10