Best Jaw Pullers. Reviews September, 2020

ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel

Search only ABN brand name
ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel

Current price: 27.49 USD


Check price and availability


Height: 9.75196849399 Inches

Length: 5.20078739627 Inches

Width: 4.90157479815 Inches

Weight: 6.5477291814 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears

More Info

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

Search only ABN brand name
ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

Current price: 17.99 USD


Check price and availability


Height: 1.79921259659 Inches

Length: 9.75196849399 Inches

Width: 6.90157479611 Inches

Weight: 1.23 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free

More Info

OTC 1022 2-Ton Reversible Jaw 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)

Search only OTC brand name
OTC 1022 2-Ton Reversible Jaw 'Grip-O-Matic' Puller - 2 Jaw (Mechanical)

Current price: 37.04 USD


Check price and availability


Height: 9.49999999031 Inches

Length: 1.99999999796 Inches

Width: 6.09842519063 Inches

Weight: 0.00220462262 Pounds

Warranty: Limited lifetime warranty

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs

More Info

VXB Brand OTC 1027 Mechanical Grip-O-Matic 5-Ton Reversible 2/3 Jaw Puller 5-Ton Reversible 2/3-long Jaw Puller Maximum Reach 5-1/2

Search only VXB brand name
VXB Brand OTC 1027 Mechanical Grip-O-Matic 5-Ton Reversible 2/3 Jaw Puller 5-Ton Reversible 2/3-long Jaw Puller Maximum Reach 5-1/2

Current price: 54.24 USD


Check price and availability


Height: 10 Inches

Length: 7.5 Inches

Width: 6 Inches

Weight: 0.14 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
  • Upper jaw thickness 5/16 inch and lower jaw thickness 1/4 inch
  • Screw size 9/16 inch-20 x 6-15/16 inch
  • Maximum reach 5-1/2 inch and maximum spread 7 inch
  • 5-Ton reversible 2/3-long Jaw puller
  • Brand:OTC

More Info

Mofeez 3" 4" 6" inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel 3pc Set

Search only Mofeez brand name
Mofeez 3

Current price: 23.99 USD


Check price and availability


Weight: 5.8642961692 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
  • Upper jaw thickness 5/16 inch and lower jaw thickness 1/4 inch
  • Screw size 9/16 inch-20 x 6-15/16 inch
  • Maximum reach 5-1/2 inch and maximum spread 7 inch
  • 5-Ton reversible 2/3-long Jaw puller
  • Brand:OTC
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 3 positions and the 4-inch and 6-inch gear pullers both have 6 positions
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free

More Info

Posi Lock 110 10" Reach, 1" - 15" Spread, 20 Ton Capacity 3 Jaw Puller, 20 tons Capacity, 9.2/3" Reach

Search only Posi Lock brand name
Posi Lock 110 10

Current price: 287.67 USD


Check price and availability


Height: 6.6 Inches

Length: 20.8 Inches

Width: 9.2 Inches

Weight: 17 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
  • Upper jaw thickness 5/16 inch and lower jaw thickness 1/4 inch
  • Screw size 9/16 inch-20 x 6-15/16 inch
  • Maximum reach 5-1/2 inch and maximum spread 7 inch
  • 5-Ton reversible 2/3-long Jaw puller
  • Brand:OTC
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 3 positions and the 4-inch and 6-inch gear pullers both have 6 positions
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Tapered jaws for better access in tight spaces
  • 20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
  • Forged steel jaws for increased strength over investment casting
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys

More Info

Orion Motor Tech 3" 4" 6" 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

Search only Orion Motor Tech brand name
Orion Motor Tech 3

Current price: 23.99 USD


Check price and availability


  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
  • Upper jaw thickness 5/16 inch and lower jaw thickness 1/4 inch
  • Screw size 9/16 inch-20 x 6-15/16 inch
  • Maximum reach 5-1/2 inch and maximum spread 7 inch
  • 5-Ton reversible 2/3-long Jaw puller
  • Brand:OTC
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 3 positions and the 4-inch and 6-inch gear pullers both have 6 positions
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Tapered jaws for better access in tight spaces
  • 20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
  • Forged steel jaws for increased strength over investment casting
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by OMT's warranty and friendly customer service.
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed.
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread; a 4 inch gear puller with a 3" reach and 4" max. spread; and a 6 inch gear puller with a 4.7" reach and 6" max. spread.
  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.

More Info

Posi Lock 108 8" Reach, 0.75" - 12" Spread, 37479 lbs Capacity 3 Jaw Puller

Search only Posi Lock brand name
Posi Lock 108 8

Current price: 212.74 USD

Saving: $155.26 (42%)


Check price and availability


Height: 6.4 Inches

Length: 20.4 Inches

Width: 9 Inches

Weight: 13.95 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
  • Upper jaw thickness 5/16 inch and lower jaw thickness 1/4 inch
  • Screw size 9/16 inch-20 x 6-15/16 inch
  • Maximum reach 5-1/2 inch and maximum spread 7 inch
  • 5-Ton reversible 2/3-long Jaw puller
  • Brand:OTC
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 3 positions and the 4-inch and 6-inch gear pullers both have 6 positions
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Tapered jaws for better access in tight spaces
  • 20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
  • Forged steel jaws for increased strength over investment casting
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by OMT's warranty and friendly customer service.
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed.
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread; a 4 inch gear puller with a 3" reach and 4" max. spread; and a 6 inch gear puller with a 4.7" reach and 6" max. spread.
  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.
  • Package Dimension : 52.832 centimeters L x 22.352 centimeters W x 17.018 centimeters H
  • Item Package weight : 13.95 pounds
  • Country of Origin: UNITED STATES
  • Manual puller with 17 Ton Capacity, 8 inch reach

More Info

Performance Tool W137P 6" 3-Jaw Gear Puller

Search only Performance Tool brand name
Performance Tool W137P 6

Current price: 21.49 USD


Check price and availability


Height: 3.3 Inches

Length: 8.8 Inches

Width: 4.3 Inches

Weight: 0.53 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
  • Upper jaw thickness 5/16 inch and lower jaw thickness 1/4 inch
  • Screw size 9/16 inch-20 x 6-15/16 inch
  • Maximum reach 5-1/2 inch and maximum spread 7 inch
  • 5-Ton reversible 2/3-long Jaw puller
  • Brand:OTC
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 3 positions and the 4-inch and 6-inch gear pullers both have 6 positions
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Tapered jaws for better access in tight spaces
  • 20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
  • Forged steel jaws for increased strength over investment casting
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by OMT's warranty and friendly customer service.
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed.
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread; a 4 inch gear puller with a 3" reach and 4" max. spread; and a 6 inch gear puller with a 4.7" reach and 6" max. spread.
  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.
  • Package Dimension : 52.832 centimeters L x 22.352 centimeters W x 17.018 centimeters H
  • Item Package weight : 13.95 pounds
  • Country of Origin: UNITED STATES
  • Manual puller with 17 Ton Capacity, 8 inch reach
  • Size: 6 inch, 3-jaw
  • Chrome plated finish
  • Drop forged for strength
  • Chrome vanadium jaws
  • Heat treated center screw

More Info

Posi Lock 104 4" Reach, 0.5" - 5" Spread, 5 ton Capacity 3 Jaw Puller

Search only Posi Lock brand name
Posi Lock 104 4

Current price: 119 USD

Saving: $100.00 (46%)


Check price and availability


Height: 12 Inches

Length: 4 Inches

Width: 5.5 Inches

Weight: 0.000625 Pounds

  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • SPECIFICATIONS: 8.75-inch (22.2cm) jaw spread; 4.75-inch (12.1cm) jaw reach
  • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short, standard, long, or extra-long reach
  • GET INTO TIGHT AREAS: Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: The ABN 6" Inch 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Center screw size - 3/8-24 x 4-7/8 inches long
  • Upper jaw thickness - 3/16 inch, lower jaw thickness - 1/8 inch; upper jaw width - 1/4 inch, lower jaw width - 1/2 inch
  • Maximum reach - 3-1/4 inches; maximum spread - 4 inches
  • Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
  • OTC's 2-ton capacity, 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
  • Upper jaw thickness 5/16 inch and lower jaw thickness 1/4 inch
  • Screw size 9/16 inch-20 x 6-15/16 inch
  • Maximum reach 5-1/2 inch and maximum spread 7 inch
  • 5-Ton reversible 2/3-long Jaw puller
  • Brand:OTC
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 3 positions and the 4-inch and 6-inch gear pullers both have 6 positions
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
  • Tapered jaws for better access in tight spaces
  • 20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
  • Forged steel jaws for increased strength over investment casting
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by OMT's warranty and friendly customer service.
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed.
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread; a 4 inch gear puller with a 3" reach and 4" max. spread; and a 6 inch gear puller with a 4.7" reach and 6" max. spread.
  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.
  • Package Dimension : 52.832 centimeters L x 22.352 centimeters W x 17.018 centimeters H
  • Item Package weight : 13.95 pounds
  • Country of Origin: UNITED STATES
  • Manual puller with 17 Ton Capacity, 8 inch reach
  • Size: 6 inch, 3-jaw
  • Chrome plated finish
  • Drop forged for strength
  • Chrome vanadium jaws
  • Heat treated center screw
  • Tapered jaws allow for easier gripping and better access to tighter spots
  • Nut recessed to avoid mushrooming and disfiguration from impact
  • Leverage up front for vise-like power and no slippage
  • Centerbolt threads designed to apply high torque with less effort
  • Cage to guide jaws for fast set up, solid contact and superior safety

More Info

1    2    3    4    5    6    7    8    9    10