Best Lens Supports. Reviews August, 2020

VILTROX 85mm F1.8 Mark II STM Full-Frame 85mm f1.8 ii for Sony E-Mount Camera Lens Support AF Auto Focus for Sony A7III A7RIII A7SII A7II a6500 a6400 a6300

Search only VILTROX brand name
VILTROX 85mm F1.8 Mark II STM Full-Frame 85mm f1.8 ii for Sony E-Mount Camera Lens Support AF Auto Focus for Sony A7III A7RIII A7SII A7II a6500 a6400 a6300

Current price: 399 USD


Check price and availability


  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.

More Info

Neewer Telephoto Lens Support Bracket Quick Shoe Plate Long-Focus Stand Holder with 1/4inch and 3/8inch Screw Thread for Tripod Ball Head DSLR Camera Photography Compatible with Arca-Swiss

Search only Neewer brand name
Neewer Telephoto Lens Support Bracket Quick Shoe Plate Long-Focus Stand Holder with 1/4inch and 3/8inch Screw Thread for Tripod Ball Head DSLR Camera Photography Compatible with Arca-Swiss

Current price: 45.99 USD

Saving: $4.00 (8%)


Check price and availability


Weight: 1.25 Pounds

  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included

More Info

SMALLRIG Universal Lens Support Bracket Quick Release with Rod Clamp Lens - 2152

Search only SMALLRIG brand name
SMALLRIG Universal Lens Support Bracket Quick Release with Rod Clamp Lens - 2152

Current price: 43.99 USD


Check price and availability


Height: 4.724409444 Inches

Length: 4.724409444 Inches

Width: 4.724409444 Inches

Weight: 0.24 Pounds

  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods

More Info

7artisans 12mm F2.8 Ultra Wide Angle Lens for Fuji Fujifilm X Mount Mirrorless Camera - Manual Focus Fixed Lens Supports X-A1 X-A10 X-A2 X-A3 X-at X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2

Search only 7artisans brand name
7artisans 12mm F2.8 Ultra Wide Angle Lens for Fuji Fujifilm X Mount Mirrorless Camera - Manual Focus Fixed Lens Supports X-A1 X-A10 X-A2 X-A3 X-at X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2

Current price: 172 USD


Check price and availability


Weight: 0.97 Pounds

  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods
  • Supports Fuji Fujifilm X-A1 X-A10 X-A2 X-A3 X-AT X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2 X-E1 X-E2 X-E2s
  • Multi-Layer Coating: Increased Light Transmission and Reduced Internal Reflections Such as Flaring and Ghosting
  • F2.8 - F16 Wide Aperture: Deliver A Beautiful Bokeh While The Subject Remains Sharp
  • Aluminum Metal Body, Durable, Compact and Lightweight 0.65lb/295g
  • 10 Elements in 8 Groups. Ideal Aperture with 7 Diaphragm Blades

More Info

Minrray NDI Camera UV510 30X Optical Zoom Lens PTZ Camera POE Support Broadcasting Video Camera

Search only MINRRAY brand name
Minrray NDI Camera UV510 30X Optical Zoom Lens PTZ Camera POE Support Broadcasting Video Camera

Current price: 1299 USD


Check price and availability


  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods
  • Supports Fuji Fujifilm X-A1 X-A10 X-A2 X-A3 X-AT X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2 X-E1 X-E2 X-E2s
  • Multi-Layer Coating: Increased Light Transmission and Reduced Internal Reflections Such as Flaring and Ghosting
  • F2.8 - F16 Wide Aperture: Deliver A Beautiful Bokeh While The Subject Remains Sharp
  • Aluminum Metal Body, Durable, Compact and Lightweight 0.65lb/295g
  • 10 Elements in 8 Groups. Ideal Aperture with 7 Diaphragm Blades
  • To use NDI Camera requires IT professional knowledge. For technical supports, pls contact us by email through amazon system or find our contacts from Minrray website(Not distributor). Low Light: High SNR CMOS combined with 2D &3D noise reduction, the video is clean even under low light conditions.
  • Support IP Streaming: ONVIF, RTSP, RTMP Protocol supports. Video output: SDI, HDMI, IP, NDI | HX
  • NDI | HX 4.0 (NDI Lisence Included)~ Low latency, high quality video transmitting oven IP, vMix OBS supported(Approval by Newtek Inc). H.265, H.264 Dual Streaming. RTSP, RTMP Supported as well.(NDI is a trardmark of Newtek Inc) .
  • All Glass FULL HD ZOOM Lens: 60.7degree wide-angle Optics 30X Zoom lens for properly targeting your subject. Mac & Windows supported.
  • FULL HD VIDEO QUALITY: 1920 x 1080P HD Resolutions Up to 60 frames Per Second. Supports 1080i @ 50fps, 59.94fps, 720P @ 60fps as well.

More Info

SmallRig 15mm Carbon Fiber Rods (12 Inch) for 15mm Rods Clamps Camera Rail Support System, Follow Focus, Matte Box, Shoulder Pad, Lens Support - 851

Search only SMALLRIG brand name
SmallRig 15mm Carbon Fiber Rods (12 Inch) for 15mm Rods Clamps Camera Rail Support System, Follow Focus, Matte Box, Shoulder Pad, Lens Support - 851

Current price: 24.99 USD


Check price and availability


Height: 0.5905511805 Inches

Length: 11.81102361 Inches

Width: 0.5905511805 Inches

Weight: 0.110231131 Pounds

  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods
  • Supports Fuji Fujifilm X-A1 X-A10 X-A2 X-A3 X-AT X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2 X-E1 X-E2 X-E2s
  • Multi-Layer Coating: Increased Light Transmission and Reduced Internal Reflections Such as Flaring and Ghosting
  • F2.8 - F16 Wide Aperture: Deliver A Beautiful Bokeh While The Subject Remains Sharp
  • Aluminum Metal Body, Durable, Compact and Lightweight 0.65lb/295g
  • 10 Elements in 8 Groups. Ideal Aperture with 7 Diaphragm Blades
  • To use NDI Camera requires IT professional knowledge. For technical supports, pls contact us by email through amazon system or find our contacts from Minrray website(Not distributor). Low Light: High SNR CMOS combined with 2D &3D noise reduction, the video is clean even under low light conditions.
  • Support IP Streaming: ONVIF, RTSP, RTMP Protocol supports. Video output: SDI, HDMI, IP, NDI | HX
  • NDI | HX 4.0 (NDI Lisence Included)~ Low latency, high quality video transmitting oven IP, vMix OBS supported(Approval by Newtek Inc). H.265, H.264 Dual Streaming. RTSP, RTMP Supported as well.(NDI is a trardmark of Newtek Inc) .
  • All Glass FULL HD ZOOM Lens: 60.7degree wide-angle Optics 30X Zoom lens for properly targeting your subject. Mac & Windows supported.
  • FULL HD VIDEO QUALITY: 1920 x 1080P HD Resolutions Up to 60 frames Per Second. Supports 1080i @ 50fps, 59.94fps, 720P @ 60fps as well.
  • Pack of 2, 12 inch in length
  • Sturdy, durable and lightweight rods
  • Machined from hollow carbon fiber tubes
  • It can be attached to a wide variety of available accessories, such as follow focus, matte boxes, 15mm rod LCD mount, 15 mm shoulder pad, 15mm rod counterweight and something else with 15mm rod clamp
  • Fit for those rigs with 15mm rod clamps to connect them together with your camera

More Info

DJI Ronin-S Part 16 Extended Lens Support

Search only DJI brand name
DJI Ronin-S Part 16 Extended Lens Support

Current price: 19.95 USD


Check price and availability


Height: 5 Inches

Length: 0.5 Inches

Width: 4 Inches

Weight: 0.0881849048 Pounds

  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods
  • Supports Fuji Fujifilm X-A1 X-A10 X-A2 X-A3 X-AT X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2 X-E1 X-E2 X-E2s
  • Multi-Layer Coating: Increased Light Transmission and Reduced Internal Reflections Such as Flaring and Ghosting
  • F2.8 - F16 Wide Aperture: Deliver A Beautiful Bokeh While The Subject Remains Sharp
  • Aluminum Metal Body, Durable, Compact and Lightweight 0.65lb/295g
  • 10 Elements in 8 Groups. Ideal Aperture with 7 Diaphragm Blades
  • To use NDI Camera requires IT professional knowledge. For technical supports, pls contact us by email through amazon system or find our contacts from Minrray website(Not distributor). Low Light: High SNR CMOS combined with 2D &3D noise reduction, the video is clean even under low light conditions.
  • Support IP Streaming: ONVIF, RTSP, RTMP Protocol supports. Video output: SDI, HDMI, IP, NDI | HX
  • NDI | HX 4.0 (NDI Lisence Included)~ Low latency, high quality video transmitting oven IP, vMix OBS supported(Approval by Newtek Inc). H.265, H.264 Dual Streaming. RTSP, RTMP Supported as well.(NDI is a trardmark of Newtek Inc) .
  • All Glass FULL HD ZOOM Lens: 60.7degree wide-angle Optics 30X Zoom lens for properly targeting your subject. Mac & Windows supported.
  • FULL HD VIDEO QUALITY: 1920 x 1080P HD Resolutions Up to 60 frames Per Second. Supports 1080i @ 50fps, 59.94fps, 720P @ 60fps as well.
  • Pack of 2, 12 inch in length
  • Sturdy, durable and lightweight rods
  • Machined from hollow carbon fiber tubes
  • It can be attached to a wide variety of available accessories, such as follow focus, matte boxes, 15mm rod LCD mount, 15 mm shoulder pad, 15mm rod counterweight and something else with 15mm rod clamp
  • Fit for those rigs with 15mm rod clamps to connect them together with your camera
  • Weight: Approx. 19 g
  • Longer than Standard Ronin-S Lens Support

More Info

SmallRig 15mm Carbon Fiber Rods (9 Inch) for 15mm Rod Rail Support System, LCD Mount, Shoulder Pad, Lens Support, 15mm Follow Focus - 1690

Search only SMALLRIG brand name
SmallRig 15mm Carbon Fiber Rods (9 Inch) for 15mm Rod Rail Support System, LCD Mount, Shoulder Pad, Lens Support, 15mm Follow Focus - 1690

Current price: 18.99 USD


Check price and availability


Height: 0.5905511805 Inches

Length: 8.8582677075 Inches

Width: 0.5905511805 Inches

Weight: 0.1322773572 Pounds

  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods
  • Supports Fuji Fujifilm X-A1 X-A10 X-A2 X-A3 X-AT X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2 X-E1 X-E2 X-E2s
  • Multi-Layer Coating: Increased Light Transmission and Reduced Internal Reflections Such as Flaring and Ghosting
  • F2.8 - F16 Wide Aperture: Deliver A Beautiful Bokeh While The Subject Remains Sharp
  • Aluminum Metal Body, Durable, Compact and Lightweight 0.65lb/295g
  • 10 Elements in 8 Groups. Ideal Aperture with 7 Diaphragm Blades
  • To use NDI Camera requires IT professional knowledge. For technical supports, pls contact us by email through amazon system or find our contacts from Minrray website(Not distributor). Low Light: High SNR CMOS combined with 2D &3D noise reduction, the video is clean even under low light conditions.
  • Support IP Streaming: ONVIF, RTSP, RTMP Protocol supports. Video output: SDI, HDMI, IP, NDI | HX
  • NDI | HX 4.0 (NDI Lisence Included)~ Low latency, high quality video transmitting oven IP, vMix OBS supported(Approval by Newtek Inc). H.265, H.264 Dual Streaming. RTSP, RTMP Supported as well.(NDI is a trardmark of Newtek Inc) .
  • All Glass FULL HD ZOOM Lens: 60.7degree wide-angle Optics 30X Zoom lens for properly targeting your subject. Mac & Windows supported.
  • FULL HD VIDEO QUALITY: 1920 x 1080P HD Resolutions Up to 60 frames Per Second. Supports 1080i @ 50fps, 59.94fps, 720P @ 60fps as well.
  • Pack of 2, 12 inch in length
  • Sturdy, durable and lightweight rods
  • Machined from hollow carbon fiber tubes
  • It can be attached to a wide variety of available accessories, such as follow focus, matte boxes, 15mm rod LCD mount, 15 mm shoulder pad, 15mm rod counterweight and something else with 15mm rod clamp
  • Fit for those rigs with 15mm rod clamps to connect them together with your camera
  • Weight: Approx. 19 g
  • Longer than Standard Ronin-S Lens Support
  • 2 rods are included in the package, 9 inch in length
  • Highly rigid, lightweight and corrosion resistant
  • Made of lightweight carbon fiber. Rigid, durable and lightweight rods
  • SmallRig 1690 can be attached to a wide variety of available accessories, such as follow focus, matte boxes, also 15 mm shoulder pad, etc.
  • 15mm rod carbon fiber 1690 fits for those rigs with 15mm rail block clamp to connect them together with your camera

More Info

SMALLRIG Universal Lens Support with 15mm LWS Rod Clamp for Diameter 50mm to 140mm Lens - 1784

Search only SMALLRIG brand name
SMALLRIG Universal Lens Support with 15mm LWS Rod Clamp for Diameter 50mm to 140mm Lens - 1784

Current price: 19.99 USD


Check price and availability


Height: 1.2204724397 Inches

Length: 3.149606296 Inches

Width: 3.7007873978 Inches

Weight: 0.3086471668 Pounds

  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods
  • Supports Fuji Fujifilm X-A1 X-A10 X-A2 X-A3 X-AT X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2 X-E1 X-E2 X-E2s
  • Multi-Layer Coating: Increased Light Transmission and Reduced Internal Reflections Such as Flaring and Ghosting
  • F2.8 - F16 Wide Aperture: Deliver A Beautiful Bokeh While The Subject Remains Sharp
  • Aluminum Metal Body, Durable, Compact and Lightweight 0.65lb/295g
  • 10 Elements in 8 Groups. Ideal Aperture with 7 Diaphragm Blades
  • To use NDI Camera requires IT professional knowledge. For technical supports, pls contact us by email through amazon system or find our contacts from Minrray website(Not distributor). Low Light: High SNR CMOS combined with 2D &3D noise reduction, the video is clean even under low light conditions.
  • Support IP Streaming: ONVIF, RTSP, RTMP Protocol supports. Video output: SDI, HDMI, IP, NDI | HX
  • NDI | HX 4.0 (NDI Lisence Included)~ Low latency, high quality video transmitting oven IP, vMix OBS supported(Approval by Newtek Inc). H.265, H.264 Dual Streaming. RTSP, RTMP Supported as well.(NDI is a trardmark of Newtek Inc) .
  • All Glass FULL HD ZOOM Lens: 60.7degree wide-angle Optics 30X Zoom lens for properly targeting your subject. Mac & Windows supported.
  • FULL HD VIDEO QUALITY: 1920 x 1080P HD Resolutions Up to 60 frames Per Second. Supports 1080i @ 50fps, 59.94fps, 720P @ 60fps as well.
  • Pack of 2, 12 inch in length
  • Sturdy, durable and lightweight rods
  • Machined from hollow carbon fiber tubes
  • It can be attached to a wide variety of available accessories, such as follow focus, matte boxes, 15mm rod LCD mount, 15 mm shoulder pad, 15mm rod counterweight and something else with 15mm rod clamp
  • Fit for those rigs with 15mm rod clamps to connect them together with your camera
  • Weight: Approx. 19 g
  • Longer than Standard Ronin-S Lens Support
  • 2 rods are included in the package, 9 inch in length
  • Highly rigid, lightweight and corrosion resistant
  • Made of lightweight carbon fiber. Rigid, durable and lightweight rods
  • SmallRig 1690 can be attached to a wide variety of available accessories, such as follow focus, matte boxes, also 15 mm shoulder pad, etc.
  • 15mm rod carbon fiber 1690 fits for those rigs with 15mm rail block clamp to connect them together with your camera
  • The rod clamp part is compatible with any standard 15mm LWS rig.
  • Composed of lightweight aluminum, the lens support has a vertically adjustable bracket so it can accommodate 50-140mm lens diameters.
  • When connected to a cinema lens's support foot or a still photo lens's tripod collar, the lens support removes the weight stress from the camera's lens mount.
  • SMALLRIG Universal Lens Support provides physical support for long lens, thus relieving the potentially damaging pressure on the camera's lens mount.
  • SMALLRIG Universal Lens Support with 15mm LWS Rod Clamp 1784 mounts on standard LWS-spaced 15mm rods and is designed to take much of the weight of heavier lens off the camera's lens mount.

More Info

EACHSHOT Universal Counterweight for Zhiyun Smooth 4 Smooth Q Feiyu Vimble 2 DJI Osmo Mobile 3 2 Evo and Other Smartphone Gimbal Stabilizer Applied to Moment Phone Lens Filter Supports up to 100g

Search only EACHSHOT brand name
EACHSHOT Universal Counterweight for Zhiyun Smooth 4 Smooth Q Feiyu Vimble 2 DJI Osmo Mobile 3 2 Evo and Other Smartphone Gimbal Stabilizer Applied to Moment Phone Lens Filter Supports up to 100g

Current price: 19.98 USD

Saving: $10.01 (33%)


Check price and availability


  • The lens is an integrated microUSB port located on the rear metal mount of the lens. This connector is used to upgrade the lens' firmware.
  • Uses an 'HD Nano' multi-layer coating on individual elements to minimize ghosting and flares.
  • It's constructed of ten elements in seven groups, including one extra-low dispersion element and four specialty elements made from 'highly transparent glass,' which reduces aberrations and improves color rendering.
  • The lens, which has an aperture range of F1.8 to F16, is designed for full-frame Sony cameras, but also works as a 127.5mm equivalent on APS-C cameras.
  • A stepping motor (STM) is used to drive the autofocus and the lens features a minimum focusing distance of 80cm (2.62ft). The front filter size is 72mm and integrated contacts power the aperture mechanism and deliver EXIF data to compatible Sony cameras.
  • DURABLE AND HEAVY LOAD: CNC aluminum alloy construction, can support 6-10 kilograms/13.2-22 pounds heavy load; Designed with surface oxidized treatment, more durable
  • ADJUSTABLE: Camera position is horizontally moveable for double clamp design. Height adjustable to suit different Medium and Long-Focus lenses. 1/4 inch screw Quick Shoe Plate with non-slip rubber, easy to install
  • DOUBLE WHEELS AND NON-SLIP DESIGN: Design of double wheels for Y-Bracket. Wheel center distance is 4.6 centimeters. Strong enough to hold all kinds of medium and long-Focus lenses. Middle part between wheels is designed with soft non-slip rubbers to protect camera lens from being scratched effectively
  • MULTIPLE USING METHODS: Double-layer dovetail groove is designed for long base plate. There are both 1/4 inch and 3/8 inch screw thread hole at the bottom compatible with Arca-Swiss type mount or tripod directly
  • GREAT PRECISION: Designed for medium and long-Focus lenses, it can provide stable support for lenses, protect the camera and improve balance, and facilitate the positioning of lenses and cameras; Note: Tripod and Camera are not included
  • PROTECTION: Lens support adapter comes with rubber pads to protect your lens from wear-and-tear
  • STABLE: The lens support is one piece anti-off designed 1/4"-20 threaded rod and includes a Y-bracket support will be more stable to support the lens. And a hole on the rod to be secure again for a hex spanner
  • QUICK RELEASE: The half rod clamp structure allows to quick attachment/detachment without removing other rod-mount accessories
  • ADJUSTABILITY: 6mm Horizontal Adjustment, 22mm Vertical Adjustment to meet all kinds of lens height and position
  • UNIVERSALITY: SmallRig 15mm LWS Rod Lens Support 2152 supports heavy lenses when using 15mm lightweight rods
  • Supports Fuji Fujifilm X-A1 X-A10 X-A2 X-A3 X-AT X-M1 X-M2 X-T1 X-T10 X-T2 X-T20 X-Pro1 X-Pro2 X-E1 X-E2 X-E2s
  • Multi-Layer Coating: Increased Light Transmission and Reduced Internal Reflections Such as Flaring and Ghosting
  • F2.8 - F16 Wide Aperture: Deliver A Beautiful Bokeh While The Subject Remains Sharp
  • Aluminum Metal Body, Durable, Compact and Lightweight 0.65lb/295g
  • 10 Elements in 8 Groups. Ideal Aperture with 7 Diaphragm Blades
  • To use NDI Camera requires IT professional knowledge. For technical supports, pls contact us by email through amazon system or find our contacts from Minrray website(Not distributor). Low Light: High SNR CMOS combined with 2D &3D noise reduction, the video is clean even under low light conditions.
  • Support IP Streaming: ONVIF, RTSP, RTMP Protocol supports. Video output: SDI, HDMI, IP, NDI | HX
  • NDI | HX 4.0 (NDI Lisence Included)~ Low latency, high quality video transmitting oven IP, vMix OBS supported(Approval by Newtek Inc). H.265, H.264 Dual Streaming. RTSP, RTMP Supported as well.(NDI is a trardmark of Newtek Inc) .
  • All Glass FULL HD ZOOM Lens: 60.7degree wide-angle Optics 30X Zoom lens for properly targeting your subject. Mac & Windows supported.
  • FULL HD VIDEO QUALITY: 1920 x 1080P HD Resolutions Up to 60 frames Per Second. Supports 1080i @ 50fps, 59.94fps, 720P @ 60fps as well.
  • Pack of 2, 12 inch in length
  • Sturdy, durable and lightweight rods
  • Machined from hollow carbon fiber tubes
  • It can be attached to a wide variety of available accessories, such as follow focus, matte boxes, 15mm rod LCD mount, 15 mm shoulder pad, 15mm rod counterweight and something else with 15mm rod clamp
  • Fit for those rigs with 15mm rod clamps to connect them together with your camera
  • Weight: Approx. 19 g
  • Longer than Standard Ronin-S Lens Support
  • 2 rods are included in the package, 9 inch in length
  • Highly rigid, lightweight and corrosion resistant
  • Made of lightweight carbon fiber. Rigid, durable and lightweight rods
  • SmallRig 1690 can be attached to a wide variety of available accessories, such as follow focus, matte boxes, also 15 mm shoulder pad, etc.
  • 15mm rod carbon fiber 1690 fits for those rigs with 15mm rail block clamp to connect them together with your camera
  • The rod clamp part is compatible with any standard 15mm LWS rig.
  • Composed of lightweight aluminum, the lens support has a vertically adjustable bracket so it can accommodate 50-140mm lens diameters.
  • When connected to a cinema lens's support foot or a still photo lens's tripod collar, the lens support removes the weight stress from the camera's lens mount.
  • SMALLRIG Universal Lens Support provides physical support for long lens, thus relieving the potentially damaging pressure on the camera's lens mount.
  • SMALLRIG Universal Lens Support with 15mm LWS Rod Clamp 1784 mounts on standard LWS-spaced 15mm rods and is designed to take much of the weight of heavier lens off the camera's lens mount.
  • Enables you to add phone case and lens setup on smartphone when use with gimbal.
  • Supports Zhiyun Smooth 4, Smooth Q, Feiyu Vimble 2, Osmo Mobile 1 and 2, Evo Shift and most other major gimbals.

More Info

1    2    3    4    5    6    7    8    9    10