Best Linear Motion Products. Reviews September, 2020

WindyNation (2pcs) 12 Volt, 225 lbs Linear Actuators + Up Down DPDT Switch + Mounting Brackets + Connectors (Momentary or Maintained Up Down Switch) (8" Linear Actuator, Momentary Switch)

Search only WindyNation brand name
WindyNation (2pcs) 12 Volt, 225 lbs Linear Actuators + Up Down DPDT Switch + Mounting Brackets + Connectors (Momentary or Maintained Up Down Switch) (8

Current price: 157.99 USD


Check price and availability


  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.

More Info

Joomen CNC SBR16 support rail RM1605 ballscrew 600mm Linear Motion Kit

Search only Joomen brand name
Joomen CNC SBR16 support rail RM1605 ballscrew 600mm Linear Motion Kit

Current price: 169 USD


Check price and availability


  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case

More Info

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Carriage Block for 3D Printer and CNC Machine

Search only Iverntech brand name
Iverntech MGN12 300mm Linear Rail Guide with MGN12H Carriage Block for 3D Printer and CNC Machine

Current price: 19.99 USD


Check price and availability


  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage

More Info

Twotrees MGN12H 300mm Linear Sliding Guideway with 1pcs Linear Bearing Sliding Block for 3D Printer and CNC Machine(H-Type,Black)

Search only Twotrees brand name
Twotrees MGN12H 300mm Linear Sliding Guideway with 1pcs Linear Bearing Sliding Block for 3D Printer and CNC Machine(H-Type,Black)

Current price: 20.99 USD


Check price and availability


  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage
  • Several lengths available: 300mm, (12 holes), 350mm, 14 (holes), 400mm, (16 holes), For connecting the rail to the machine via M3 bolts and nuts.
  • Widely Use:Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
  • High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • 300mm MGN12 linear rail guide with MGN12H block

More Info

BestEquip Linear Guide Rail 2Pcs HGR20-1000mm Linear Slide Rail with 1Pcs RM1605-1000mm Ballscrew with BF12/BK12 Kit Linear Slide Rail Guide Rail Square for DIY CNC Routers Lathes Mills

Search only BestEquip brand name
BestEquip Linear Guide Rail 2Pcs HGR20-1000mm Linear Slide Rail with 1Pcs RM1605-1000mm Ballscrew with BF12/BK12 Kit Linear Slide Rail Guide Rail Square for DIY CNC Routers Lathes Mills

Current price: 107.99 USD


Check price and availability


Height: 3.2 Inches

Length: 40.9 Inches

Width: 3.5 Inches

Weight: 16 Pounds

  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage
  • Several lengths available: 300mm, (12 holes), 350mm, 14 (holes), 400mm, (16 holes), For connecting the rail to the machine via M3 bolts and nuts.
  • Widely Use:Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
  • High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • 300mm MGN12 linear rail guide with MGN12H block
  • 【WIDE APPLICATION】- The CNC linear rail is widely used in automatic equipment, precision measuring equipment, and many other machines that need precision linear movement.
  • 【EASY TO INSTALL】- Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient.
  • 【HIGH-QUALITY STEEL MATERIAL】- Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【1000MM HGR20 Linear Guide Rail】- This linear guide rail set includes 2 pieces of HGR20-1000mm linear guide rail, 4 blocks, 1pcs M1605-1000mm ballscrew, 1pcs ball nut, 1pcs BF12/BK12 nut, and 1pcs plum coupling.

More Info

ReliaBot 2PCs 8mm x 600mm (.315 x 23.62 inches) Case Hardened Chrome Plated Linear Motion Rod Shaft Guide - Metric h8 Tolerance

Search only ReliaBot brand name
ReliaBot 2PCs 8mm x 600mm (.315 x 23.62 inches) Case Hardened Chrome Plated Linear Motion Rod Shaft Guide - Metric h8 Tolerance

Current price: 22.89 USD


Check price and availability


  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage
  • Several lengths available: 300mm, (12 holes), 350mm, 14 (holes), 400mm, (16 holes), For connecting the rail to the machine via M3 bolts and nuts.
  • Widely Use:Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
  • High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • 300mm MGN12 linear rail guide with MGN12H block
  • 【WIDE APPLICATION】- The CNC linear rail is widely used in automatic equipment, precision measuring equipment, and many other machines that need precision linear movement.
  • 【EASY TO INSTALL】- Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient.
  • 【HIGH-QUALITY STEEL MATERIAL】- Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【1000MM HGR20 Linear Guide Rail】- This linear guide rail set includes 2 pieces of HGR20-1000mm linear guide rail, 4 blocks, 1pcs M1605-1000mm ballscrew, 1pcs ball nut, 1pcs BF12/BK12 nut, and 1pcs plum coupling.
  • Length 600mm, tolerance ± 0.5mm ( 599.5mm - 600.5mm )
  • Diameter 8mm, tolerance -0.005mm to -0.03mm ( 7.995mm - 7.97mm)
  • Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.
  • The surface has been chrome plated to enhance the hardness.
  • The material is carbon steel, which is very suitable for linear motion rod.

More Info

CNC Linear Guide Slide Table 300mm Ballscrew 1605 + HG15 Linear Rail Guide Heavy Load 250kg with Nema34 Motor Base for 3-Axis Engraving Machine

Search only Heechoo brand name
CNC Linear Guide Slide Table 300mm Ballscrew 1605 + HG15 Linear Rail Guide Heavy Load 250kg with Nema34 Motor Base for 3-Axis Engraving Machine

Current price: 328 USD


Check price and availability


Weight: 17.63698096 Pounds

  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage
  • Several lengths available: 300mm, (12 holes), 350mm, 14 (holes), 400mm, (16 holes), For connecting the rail to the machine via M3 bolts and nuts.
  • Widely Use:Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
  • High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • 300mm MGN12 linear rail guide with MGN12H block
  • 【WIDE APPLICATION】- The CNC linear rail is widely used in automatic equipment, precision measuring equipment, and many other machines that need precision linear movement.
  • 【EASY TO INSTALL】- Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient.
  • 【HIGH-QUALITY STEEL MATERIAL】- Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【1000MM HGR20 Linear Guide Rail】- This linear guide rail set includes 2 pieces of HGR20-1000mm linear guide rail, 4 blocks, 1pcs M1605-1000mm ballscrew, 1pcs ball nut, 1pcs BF12/BK12 nut, and 1pcs plum coupling.
  • Length 600mm, tolerance ± 0.5mm ( 599.5mm - 600.5mm )
  • Diameter 8mm, tolerance -0.005mm to -0.03mm ( 7.995mm - 7.97mm)
  • Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.
  • The surface has been chrome plated to enhance the hardness.
  • The material is carbon steel, which is very suitable for linear motion rod.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing;
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket;
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm);
  • Slide table working length:300mm,full linear actuator length:482mm.

More Info

QWORK 2 Pack Linear Shaft CNC Parts Kits, Including 2 PCS 8mm x 400mm Liner Rail Linear Shaft Optical Axis, 4 PCS SK8 Aluminum Rail Support Guide, 2 PCS SCS8UU Linear Motion Ball Bearing Slide Bushing

Search only QWORK brand name
QWORK 2 Pack Linear Shaft CNC Parts Kits, Including 2 PCS 8mm x 400mm Liner Rail Linear Shaft Optical Axis, 4 PCS SK8 Aluminum Rail Support Guide, 2 PCS SCS8UU Linear Motion Ball Bearing Slide Bushing

Current price: 22.99 USD


Check price and availability


Weight: 1.2 Pounds

  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage
  • Several lengths available: 300mm, (12 holes), 350mm, 14 (holes), 400mm, (16 holes), For connecting the rail to the machine via M3 bolts and nuts.
  • Widely Use:Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
  • High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • 300mm MGN12 linear rail guide with MGN12H block
  • 【WIDE APPLICATION】- The CNC linear rail is widely used in automatic equipment, precision measuring equipment, and many other machines that need precision linear movement.
  • 【EASY TO INSTALL】- Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient.
  • 【HIGH-QUALITY STEEL MATERIAL】- Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【1000MM HGR20 Linear Guide Rail】- This linear guide rail set includes 2 pieces of HGR20-1000mm linear guide rail, 4 blocks, 1pcs M1605-1000mm ballscrew, 1pcs ball nut, 1pcs BF12/BK12 nut, and 1pcs plum coupling.
  • Length 600mm, tolerance ± 0.5mm ( 599.5mm - 600.5mm )
  • Diameter 8mm, tolerance -0.005mm to -0.03mm ( 7.995mm - 7.97mm)
  • Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.
  • The surface has been chrome plated to enhance the hardness.
  • The material is carbon steel, which is very suitable for linear motion rod.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing;
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket;
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm);
  • Slide table working length:300mm,full linear actuator length:482mm.
  • 100% Satisfied Service - Enjoy a smooth & frustration-free experience with our 100% Satisfied Service in one Month!
  • Usage - It can be widely used for robots, cracker machines, supersonic cleaning equipment, and etc.
  • Function - It can work with linear support blocks and closed type slide units in linear motion.
  • Excellent Smooth Motion - With the excellent ball in the slide bushing and precision ground by the manufacturer, it can move smoothly and precisely without deflection.
  • High Quality - Made of high quality steel and aluminum alloy, this kit is durable, stable.

More Info

BestEquip Linear Rail 2PCS SBR16-300mm Linear Slide Rail 4PCS SBR16UU Bearing Block CNC Kit Linear Rails and Bearings Kit CNC Rails Linear Rail Set forAutomated Machines and Equipments

Search only BestEquip brand name
BestEquip Linear Rail 2PCS SBR16-300mm Linear Slide Rail 4PCS SBR16UU Bearing Block CNC Kit Linear Rails and Bearings Kit CNC Rails Linear Rail Set forAutomated Machines and Equipments

Current price: 31.9 USD


Check price and availability


Height: 3.2 Inches

Length: 13.4 Inches

Width: 3.5 Inches

Weight: 4.3 Pounds

  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage
  • Several lengths available: 300mm, (12 holes), 350mm, 14 (holes), 400mm, (16 holes), For connecting the rail to the machine via M3 bolts and nuts.
  • Widely Use:Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
  • High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • 300mm MGN12 linear rail guide with MGN12H block
  • 【WIDE APPLICATION】- The CNC linear rail is widely used in automatic equipment, precision measuring equipment, and many other machines that need precision linear movement.
  • 【EASY TO INSTALL】- Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient.
  • 【HIGH-QUALITY STEEL MATERIAL】- Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【1000MM HGR20 Linear Guide Rail】- This linear guide rail set includes 2 pieces of HGR20-1000mm linear guide rail, 4 blocks, 1pcs M1605-1000mm ballscrew, 1pcs ball nut, 1pcs BF12/BK12 nut, and 1pcs plum coupling.
  • Length 600mm, tolerance ± 0.5mm ( 599.5mm - 600.5mm )
  • Diameter 8mm, tolerance -0.005mm to -0.03mm ( 7.995mm - 7.97mm)
  • Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.
  • The surface has been chrome plated to enhance the hardness.
  • The material is carbon steel, which is very suitable for linear motion rod.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing;
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket;
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm);
  • Slide table working length:300mm,full linear actuator length:482mm.
  • 100% Satisfied Service - Enjoy a smooth & frustration-free experience with our 100% Satisfied Service in one Month!
  • Usage - It can be widely used for robots, cracker machines, supersonic cleaning equipment, and etc.
  • Function - It can work with linear support blocks and closed type slide units in linear motion.
  • Excellent Smooth Motion - With the excellent ball in the slide bushing and precision ground by the manufacturer, it can move smoothly and precisely without deflection.
  • High Quality - Made of high quality steel and aluminum alloy, this kit is durable, stable.
  • 【WIDE APPLICATION】- The linear guide rail is widely used in the automation machinery such as  DIY CNC routers,lathes, machine tool, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment including industrial robots, cracker machines.
  • 【EASY TO INSTALL】- Aluminum alloy support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need to maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Perfect combination of main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with high precision linear bearing inside.
  • 【HIGH-QUALITY STEEL MATERIAL】- CNC parts linear rails are made of carbon steel, linear Bearings made of GCr15 bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【300MM SBR16 LINEAR RAIL KITS】- This linear rail set includes 2 pieces of 300mm/11.8" long SBR16 rail shafts and 4 SBR16UU blocks. Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.

More Info

300mm Travel Length Linear Rail Guide Ballscrew Sfu1605 DIY CNC Router Parts X Y Z Linear Stage Actuator with NEMA17 Stepper Motor

Search only SainSmart brand name
300mm Travel Length Linear Rail Guide Ballscrew Sfu1605 DIY CNC Router Parts X Y Z Linear Stage Actuator with NEMA17 Stepper Motor

Current price: 89.99 USD


Check price and availability


  • Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black)
  • Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps
  • Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
  • Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners.
  • Accept Customized Length and Assembly
  • High Accuracy and Strong Durability
  • Designed and Produced by Joomen LLC
  • Pre-drilled holes on the Support Rail Mounts
  • Steel Material and Hardened Case
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • Blocks are pre-loaded
  • Rail Guide Length: 300mm. Block: MGN12H carriage
  • Several lengths available: 300mm, (12 holes), 350mm, 14 (holes), 400mm, (16 holes), For connecting the rail to the machine via M3 bolts and nuts.
  • Widely Use:Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device.
  • High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
  • 300mm MGN12 linear rail guide with MGN12H block
  • 【WIDE APPLICATION】- The CNC linear rail is widely used in automatic equipment, precision measuring equipment, and many other machines that need precision linear movement.
  • 【EASY TO INSTALL】- Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient.
  • 【HIGH-QUALITY STEEL MATERIAL】- Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【1000MM HGR20 Linear Guide Rail】- This linear guide rail set includes 2 pieces of HGR20-1000mm linear guide rail, 4 blocks, 1pcs M1605-1000mm ballscrew, 1pcs ball nut, 1pcs BF12/BK12 nut, and 1pcs plum coupling.
  • Length 600mm, tolerance ± 0.5mm ( 599.5mm - 600.5mm )
  • Diameter 8mm, tolerance -0.005mm to -0.03mm ( 7.995mm - 7.97mm)
  • Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.
  • The surface has been chrome plated to enhance the hardness.
  • The material is carbon steel, which is very suitable for linear motion rod.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing;
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket;
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm);
  • Slide table working length:300mm,full linear actuator length:482mm.
  • 100% Satisfied Service - Enjoy a smooth & frustration-free experience with our 100% Satisfied Service in one Month!
  • Usage - It can be widely used for robots, cracker machines, supersonic cleaning equipment, and etc.
  • Function - It can work with linear support blocks and closed type slide units in linear motion.
  • Excellent Smooth Motion - With the excellent ball in the slide bushing and precision ground by the manufacturer, it can move smoothly and precisely without deflection.
  • High Quality - Made of high quality steel and aluminum alloy, this kit is durable, stable.
  • 【WIDE APPLICATION】- The linear guide rail is widely used in the automation machinery such as  DIY CNC routers,lathes, machine tool, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment including industrial robots, cracker machines.
  • 【EASY TO INSTALL】- Aluminum alloy support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need to maintenance.
  • 【PREMIER LINEAR GUIDING SYSTEM】- Perfect combination of main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with high precision linear bearing inside.
  • 【HIGH-QUALITY STEEL MATERIAL】- CNC parts linear rails are made of carbon steel, linear Bearings made of GCr15 bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
  • 【300MM SBR16 LINEAR RAIL KITS】- This linear rail set includes 2 pieces of 300mm/11.8" long SBR16 rail shafts and 4 SBR16UU blocks. Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.
  • Horizontal maximum load capacity: 20kg; Vertical maximum load capacity: 10kg.
  • Beads screw for movement structural elements executed. With high quality, high efficiency, long life, low coefficient of friction, versatility, etc.
  • Repeat positioning accuracy of ±0.05mm.
  • Duration of travel: 300mm; The maximum speed: 50mm per second; 4 M6 nuts on the moving block to fix the workpiece, which are suitable for 42/57mm stepping motor.
  • High precision, heavy load resistance Sfu1605, which can be mounted vertically.

More Info

1    2    3    4    5    6    7    8    9    10