Best Long Length Drill Bits. Reviews November, 2020

12" Long Brad Point Bit Set (7 Drill Bit Set). Perfect For Drilling Wood, Plastic, Drywall and Composite Materials

Search only Fulton brand name
12

Current price: 20.49 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.

More Info

Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8", 3/16", 1/4", 5/16", 3/8"

Search only Neiko brand name
Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8

Current price: 21.16 USD

Saving: $3.83 (15%)


Check price and availability


Height: 2.8 Inches

Length: 13 Inches

Width: 3.1 Inches

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life

More Info

Cleveland 950E High Speed Steel Extra Long Length Drill Bit, Black Oxide, Round Shank, 118 Degree Notched Point, 1/4" Dia. x 8" Lg (Pack of 1)

Search only CLEVELAND brand name
Cleveland 950E High Speed Steel Extra Long Length Drill Bit, Black Oxide, Round Shank, 118 Degree Notched Point, 1/4

Current price: 17.1 USD


Check price and availability


Height: 0.49999999949 Inches

Length: 0.399999999592 Inches

Width: 7.899999991942 Inches

Weight: 0.1 Pounds

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit

More Info

Bosch BL2631 1/16 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit

Search only BOSCH brand name
Bosch BL2631 1/16 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit

Current price: 2.71 USD

Saving: $0.89 (25%)


Check price and availability


Height: 0.3543307083 Inches

Length: 3.543307083 Inches

Width: 1.0629921249 Inches

Weight: 0.0440924524 Pounds

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits

More Info

DEWALT DW1602-1/8-Inch by 12-Inch Extra Long Black Oxide Drill Bit

Search only DEWALT brand name
DEWALT DW1602-1/8-Inch by 12-Inch Extra Long Black Oxide Drill Bit

Current price: 5.98 USD

Saving: $8.32 (58%)


Check price and availability


Height: 0.2 Inches

Length: 14.7 Inches

Width: 1.9 Inches

Weight: 0.08 Pounds

Warranty: 1 Year Full Warranty

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit

More Info

QLOUNI 8Pcs 200mm/8'' Extra Long Drill Bits Set HSS Twist Bits 4/4.2/4.5/5/5.2/6/8/10mm Round Shank Wood Working Tool

Search only QLOUNI brand name
QLOUNI 8Pcs 200mm/8'' Extra Long Drill Bits Set HSS Twist Bits 4/4.2/4.5/5/5.2/6/8/10mm Round Shank Wood Working Tool

Current price: 15.99 USD


Check price and availability


Height: 0.5905511805 Inches

Length: 9.842519675 Inches

Width: 1.968503935 Inches

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit
  • [Application] The drill bit sets are great for most drilling jobs and soft materials such as aluminum, wood, plastics, PVC or stainless steel within 1-4mm
  • [Twist Design]The split point tip and twist design increases cutting speed and helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process
  • [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
  • [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
  • [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas

More Info

Drill America - DWDA/CX121/16 1/16" x 12" High Speed Steel Aircraft Extension Drill Bit, DWDA/C Series

Search only Drill America brand name
Drill America - DWDA/CX121/16 1/16

Current price: 3.41 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit
  • [Application] The drill bit sets are great for most drilling jobs and soft materials such as aluminum, wood, plastics, PVC or stainless steel within 1-4mm
  • [Twist Design]The split point tip and twist design increases cutting speed and helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process
  • [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
  • [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
  • [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
  • Manufactured to national aerospace standard 907
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of tool holding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Bosch BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit

Search only BOSCH brand name
Bosch BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit

Current price: 4.99 USD

Saving: $2.00 (29%)


Check price and availability


Warranty: No

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit
  • [Application] The drill bit sets are great for most drilling jobs and soft materials such as aluminum, wood, plastics, PVC or stainless steel within 1-4mm
  • [Twist Design]The split point tip and twist design increases cutting speed and helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process
  • [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
  • [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
  • [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
  • Manufactured to national aerospace standard 907
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of tool holding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits

More Info

COMOWARE Extra Long Brad Point Drill Bit Set - 300mm Carbon Steel Wood Drill Bit Set for Hardwood, Plywood, Plastic, 7Pcs | 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2''

Search only COMOWARE brand name
COMOWARE Extra Long Brad Point Drill Bit Set - 300mm Carbon Steel Wood Drill Bit Set for Hardwood, Plywood, Plastic, 7Pcs | 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2''

Current price: 19.99 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit
  • [Application] The drill bit sets are great for most drilling jobs and soft materials such as aluminum, wood, plastics, PVC or stainless steel within 1-4mm
  • [Twist Design]The split point tip and twist design increases cutting speed and helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process
  • [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
  • [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
  • [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
  • Manufactured to national aerospace standard 907
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of tool holding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.

More Info

IRWIN 1890707 Straight Shank Installer Drill Bit for Wood, 18-Inch by 1/4-Inch

Search only Irwin Tools brand name
IRWIN 1890707 Straight Shank Installer Drill Bit for Wood, 18-Inch by 1/4-Inch

Current price: 12.05 USD

Saving: $2.17 (15%)


Check price and availability


Height: 7.87 Inches

Length: 18.748031496063 Inches

Width: 7.87 Inches

Weight: 0.2 Pounds

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • Made in the USA
  • Drill bit conforms to ANSI standards
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit
  • [Application] The drill bit sets are great for most drilling jobs and soft materials such as aluminum, wood, plastics, PVC or stainless steel within 1-4mm
  • [Twist Design]The split point tip and twist design increases cutting speed and helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process
  • [Shank Type] 4/4.2/4.5/5/5.2/6/8/10mm standard round shank twist bit, fits into all power tools more easily and securely
  • [Titanium Coated HSS] Classic HSS construction with heat treatment, sharp twisted drill bits will make the drilling easier and more effortless, durable and not easy to bend
  • [200mm/8'' Long Drill Bit] the right length body provides better stability and balance during quick operation to ensure position is intact, and allows you to access hard to reach areas
  • Manufactured to national aerospace standard 907
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of tool holding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • MULTIPURPOSE & LIFETIME GUARANTEE: Suitable for bench drill, hand drill and conventional electric drill. Perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc. Set includes the drill bit holder for easy storage and organizing. We only care about your satisfaction. We stand behind all of our high quality products so we offer a No Question Asked on our Drill Bit Set. Please contact us (through Amazon if past the standard return window) and we will be pleased to assist you
  • FULL SET OF STANDARD SIZE: With the drill bits we offered, you can process 7 different diameter holes, ( Round shank| 1/8'', 3/16'', 1/4'', 5/16'', 3/8'' Reduced Shank| 7/16'', 1/2'' ), which meet your different needs perfectly.
  • Brad-Point Design -The Brad-Point Design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in CENTERING and NO SKID.
  • HIGH QUALITY MATERIAL: Classic Carbon Steel Material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • EXTRA LONG LENGTH & 2 TYPE SHANK: Extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with ROUND shank and REDUCED shank.
  • Premium high carbon steel construction for extended drilling life in wood
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
  • Hole in flute for easy wire pulling through walls, ceilings and floors
  • 82˚ point for fast, smooth drilling in wood

More Info

1    2    3    4    5    6    7    8    9    10